Search
Search Results
-
The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
12-16Views:287In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety. -
Reduction possibilities of the production costs of green electricity by using waste heat
15-20Views:262In my study, I examine the possibility of the reduction of green electric power’s gross production cost. My research topic may have wider considerations, since in the case of CHP technology the utilization of by-product thermal energy is not possible, and the whole production cost devolves upon green electric power. I introduce five options for the use of the heat energy, based on national and international literature and in-depth interviews.
From the aspect of efficiency, it can be stated that as alternatives, beer production and desiccation may be mentioned, since these two models were appropriate for the utilization of the total quantity of waste heat, and in the given circumstances the lowest reduction of green electric power’s production costs was achieved in these cases utmost.
-
Case study based analyses of economic viability of Hungarian beef farms
184-193Views:197Our country has great traditions in the field of beef production. As early as the Middle Ages, Hungary was known as Europe’s beef exporter. In this decade, production of the Hungarian Grey has increased, due to the popular method of keeping these animals extensively. These animals were even exported to the European markets on foot.
After joining the European Union, this sector of agriculture has been receiving attention due to the major subsidies which were given. Accordingly, numerous farmers have tried to enter this sector of production. However, the power relations have been changed lately, as have the technology used in production, which has undergone several developments. The integrative connections in the sector had been split and also the size of optimal and sustainable production has arisen.
The economic activities must be judged by their effectiveness and profitability, but in most cases their effectiveness can only be seen through such outstanding facts which are independent from the farmer.
I would like to model the economy of a certain enterprise, and the size and the level of its production, through my research under the actual economic circumstances. In my research, I pay special attention to the circumstances which are important in the Hungarian agricultural sector and rural development. -
Influence of 17-alpha methyl testosterone on the production parameters of common carp (Cyprinus carpio L.) fry
37-43Views:492During our research we aimed at finding an answer as to what extent the different concentrations of 17-alpha methyl testosterone incorporated in the diet of common carp fries can influence the production parameters of the species, as well as how efficient their sexreversal can be with the use of this method. To this end, an aquarium experiment was conducted in the course of which four different hormone treatments were set and monitored. The fish feed was enriched with 17-alpha methyl testosterone in 50 ppm, 75 ppm, 100 ppm, 500 ppm dosages.
The obtained figures revealed that the hormone treatments had no influence on the production parameters and conservation of the common carp fries. Further on, our team is to determine the sex of the fish through the examination of gonads during autopsy when they reach the 500 g average weight.
Furthermore, a male specific test method which was supposed to be of great help in our attempt to select the sex-reversed specimens in the subsequent processes was also put to the trial. During the experiment the DNA-isolation of different sample types (muscle tissue, fin, mucus) of common carp with identified sex was successfully carried out. The extracted PCR product was examined with agarose gel. Our results indicated that the ccmf2 marker was applicable, however, the obtained figures were not reliable.
-
Results of Giltsrearing in Outdoor Production System
8-11Views:221The applied technology is an alternative approach to pigkeeping-systems. An outdoor pig production breeding sows are kept at pasture either year-round or in a certain period of the year. The important equipments of outdoor pig production are farrowing or grouping sows inhuts, which protect pigs against the effects of extreme weather, and electric fences, which surround and divide the pasture. Concentrate feed can be fed from the ground or from feeders which are made of steel or timber. One of main advantages of this pig keeping system is the total mobilizable keeping technology.
Within the scope of the study we are performing an experiment to make a comparison between coventional system and free range sows keeping technology. Pannonhybrid F1 gilts were used in this experiment, 28 gilts were kept on pasture all day and 28 gilts are kept in conventional, indoor system.
In this work the results of gilts-rearing are presentated as a part of our two-years experiment. -
Investigating the potential for dual-purpose use in winter oats
35-42Views:407Dual-purpose usage is not a common technology for oats in Hungary, which is not surprising, as the area sown to our main crop is also very low. Yet the crop has a lot of untapped potential, not to mention its excellent nutritional parameters. In our experiment we investigated how much biomass can be expected after mowing winter oats at different phenological stages and whether we can expect a valuable grain yield after this process. Mowing was carried out at one-week intervals on a total of 4 occasions with 2 cutting heights. Plant height and NDVI values of the vegetation in the plots were measured during the experiment. After the harvest of the fully ripened grains, the yield and the thousand kernel weight (TKW) were determined. Our results show that with a lower cutting height (6 cm), a higher biomass yield can be achieved. The cutting height had no statistically verifiable effect on either NDVI or plant height. Droughty weather conditions during subsequent mowing significantly reduced the regeneration capacity of the plants, which was strongly reflected in the measured parameters. Furthermore, a higher grain yield was measured at a cutting height of 9 cm, which decreased gradually with the mowing time. Neither the cutting height nor the mowing time had any effect on the TKW.
-
Maize nutrient dynamics: growth, yield and sustainable practices: A narrative review
83-91Views:104Nutrient acquisition is the fundamental regulator of maize (Zea mays) growth, development, and yield. The present narrative review intends to integrate existing information on dynamics of nutrient uptake in maize under scrutiny for understanding how the processes affect growth and yield. We focus on the effective absorption and utilization of macronutrients (N, P and K) and micronutrients that promote plant health, grain development, and stress tolerance. Key determinants of nutrient availability (soil type, pH, organic matter, environment) and physiological or yield impacts of deficiency are studied. Strategies to optimize uptake efficiency precision application of fertilizer, organic fertilizers, and sustainable soil management are discussed. Optimizing these dynamics is central to maize productivity, enhancement and sustainable crop production. This review provides valuable insights into optimizing maize nutrition for improved food security and sustainable crop production.
-
The importance of chickpea (Cicer arietinum L.) and its cultivation in Hungary: A review
71-75Views:99Climate change today is no longer a question for the future. Climate change impacts not only human populations but also plant species, which are increasingly exposed to its negative effects. The increasing number of days of drought, the lack of precipitation and its unfavorable distribution are observed each year, which require adaptation. Chickpea (Cicer arietinum L.) is a drought-tolerant species characterized by deep root system that enables it to withstand prolonged periods without precipitation. Additionally, it is a thermophilic crop and tolerates moderate increases in average temperature." There is no great tradition of its cultivation and use in Hungary, but it has been cultivated by the Iregszemcse Research Institute since the 1970s. In addition to the positive aspects of its cultivation, it also has good nutritional values, outperforming in some parameters the beans (Phaseolus vulgaris L.) and peas (Pisum sativum L.) what are popular in Hungary. Its high protein and crude fibre content allows it to be used not only for human consumption but also for animal feed. The aim of this review is to describe the importance of chickpea and to identify the advantages and disadvantages of its cultivation.
-
Technological and Economic Analysis on the Hungarian Rice Sector
226-233Views:185Hungary lies on the northern edge of rice production area. According to this, the climatic conditions area not perfect for this species. The production area of rice involves typically the poorer quality soils, however these meet the requirements of rice. In Hungary exclusively domestic types are grown which have high yield and good quality and these are usually wore successful than foreign types. On the other hand, these Hungarian types should be improved considering safety in production. Nowadays, rice is grown in large scale companies with 300-1400 hectares, where production technology already exists, machinery is suitable, however the latter one a little bit old.
The average yields of the analysed companies were 3-4 t/ha in the past few years, which were a little bit above the national averages. The operating cost per hectare is almost 200 thousand HUF, from which the main part is the cost of machinery (35%) and the material cost (34%). The main part of the latter one is the irrigation costs (30%). The average cost, calculated from the total production cost, is 80 thousand HUF/t. Considering the above-mentioned costs and the price of rice (75 thousand HUF/t) it can be stated that the profitability of the rice sector is not the best, the cost rated profitability is -6.6%. According to the results of this analysis possibilities for the increase in profitability and improvement are increased subsidies and market price, as well as genetic improvement. -
Preliminary results on Siberian sterlet (Acipenser ruthenus marsiglii) fries rearing under intensive conditions
27-31Views:218In our experiments production performances of Siberian sterlet were tested under intensive tank conditions. During the 25 days long experiment effectiveness of weaning to artificial diet of the fish was investigated. Production performances of fish fed on exclusively dry diet from the beginnings were lower than the other two groups. Between the values of sterlets fed on live food also then suddenly vs. continuously were weaned to dry diet there were no significant differences. Based on our results live food feeding could be suggested for the Siberian sterlet larvae for some days but the method of the weaning to dry diet has no significant influence to the production performances.
In 21 days long experiment four different feeding frequencies were tested in Siberian sterlet (~13 g) fingerlings. Dry feed was offered for the fish continuously, 2, 3 and 4 times per day. There were no significant differences between the values of the four treatments. Based on our results there is no high influence of feeding frequency in case of this size group of Siberian sterlet.
During the nursing in two different size groups of Siberian sterlet the optimal daily amounts of feed were aimed to determine. In case of growth values of the group fed at 7% of the total biomass were higher than the other two groups (3 and 5%). Feeding performances of fish fed at 5% were significantly better than fish fed at 7%. Based on our results for ~20 g size of the subspecies at least 5% of total body weight could be suggested.
In case of ~150 g size of the fish the production performances of fish fed at 1% were lower than the other two groups (2 and 3%). Between the values of stocks fed at 2 and 3% there were no significant differences. Based on these results 2% of total body weight of dry feed could be suggested for the Siberian sterlet with ~150 g body weight.
-
Land use, water management
81-87Views:459Due to the prognosed population increase to 9.2 billion people by 2050, the world’s crop production does not have any other chance than to increase production. This demand is a huge challenge for agriculture. Based on the forecasts, the growth rate of production of the main cereals will decrease as a result of the effect of soil, water, the increasing fuel and fertiliser prices and the impacts of climate change. Methods ensuring sustainability have to be preferred. Precision agriculture is the most effective method of crop production. We have to apply minimum cultivation in order to protect the soil surface, maintain its moisture content and increase its water reception ability. In addition to the localised use of fertiliser, sowing seed, irrigation and pesticides, it is also important to apply them in a targeted way on the basis of plot imaging. The use of the new technology results in significant cost saving and it could also reduce environmental load.
-
Effects of the development of production factors on productivity
13-18Views:201In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.
The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.
-
Evaluation of Origin and Conformation of Excellent Cows with Long Productive Lives
13-17Views:225In the last few decades a new intensive milking stock has developed as a result of breed-converter crossing in Hungary. Beside this reproduction biology of the population was affected adversely by the keeping-, and feeding technology. Serviceable lifetime has shortened and service period has lenghtened. Whereas profitable milk production needs cows with longer productive life, larger life-time production. In our work we analysed the productivity-, and reputation parameters of the 200 highest lifetime-productivity cows of Hungary. We found that inheritance has not got important role in the serviceable lifetime. Adaptability and good constitution of Holstein-friesian is proved by the fact that cows with large life-time production are reared in large plants, some of them in large stocks, industrial environment. We found during the analysis of reputation parameters that these prominent cows mostly have deeper body, higher dairy form, higher rear udder, smaller foot angle. We found some weak connection between the milk production and the reputation. Loose correlations between useful material content and some linear traits were found.
-
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:239Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
Integration of Transformation Technology and Conventional Plant Breeding of Cereal Plants
75-80Views:147The integration of plant breeding and plant transformation is needed because we have to create a homozygous genotype of great agronomic value by conventional breeding before the application of genetic technology with which we modify it by using a gene or genome sequence. The aim of integrated plant breeding is to trigger such advantegous changes by genetic technology which can not be achieved via conventional breeding or just with considerably weaker efficacy. By transformation, the plant’s agronomic performance, the efficiency and security of its production will improve and it will enable more versatile uses of the plant. Genetic technology is one sequence of a new plant variety’ breeding. To create a transgenic variety, the isolation of a gene or a sequence of a gene from the donor genome for tranformation, a homozygous plant or target genome that is suitable for transformation and is created via conventional breeding methods, an effective transformation technique and the establishment of the new variety from the transformed, fertile plant are needed. The transgenic plant should be made suitable for establishing a variety by conventional breeding so that it could be produced securely, its growing could contribute to the development of modern, sustainable agriculture, its seed could be produced profitably, it could meet the reqiurements of DUS and that the changes indicated by the transgene could provide such economic advantages compared to the original variety, which have real commercial value.
-
Assessment of electrical conductivity and germinability of groundnut genotype seeds
5-10Views:522Seed quality affects crop establishment and productivity. In addition, the use of good-quality seed is an essential prerequisite for sustainable crop production including groundnuts. Assessing germinability and electrical conductivity provides early evidence of the production potential of a given crop variety or genotype. Therefore, this study assessed the germinability and electrical conductivity of seeds of three groundnut genotypes. A laboratory experiment arranged in a Completely Randomized Design (CRD), replicated three times, was conducted at the Faculty of Agriculture, Kyambogo University, in 2020. Seeds of Igola, Serenut 1, and Serenut 2 groundnut varieties were tested, and data was collected on germination percentage and electrical conductivity. Analysis of variance (ANOVA) was performed using GenStat and means were separated using the least significant difference test at a 5% probability level. Germination percentage and electrical conductivity significantly (p<0.05) differed among the groundnut varieties, with Igola recording the highest germination percentage, followed by Serenut 1, and the lowest was in Serenut 2. The highest electrical conductivity was recorded in Serenut 1 and the lowest in Igola. Since Igola had one of the lowest electrical conductivity and the highest germination percentage, it was concluded that Igola genotype retained higher quality attributes.
-
Results of the sensory analysis of precision maize production
59-62Views:477This research was carried out in 2018, at the Látókép Experimental Station of the University of Debrecen in a moderately warm and dry production area, on deep humus layered medium-hard calcareous chernozem soil. In the scope of the research, the chlorophyll content of maize (Zea mays L.) was examined under field circumstances by means of local sensory measurements and we were looking for correlation between the obtained values and the amount of yield. Our measurements were carried out with Minolta SPAD-502 and GreenSeeker devices at 3 measurement times (4 leaf stage, 10 leaf stage and silking). It was found that phenological phases had an effect on the obtained SPAD and NDVI values and were in a slightly significant correlation with the yield. The most significant correlation was found between the results obtained during silking and the amount of yield. This may be because the least time has passed between the measurement time and harvest. Results obtained during the 10-leaf stage show excessive values in each case, which can be due to a measurement error. It was found that the phenological phase had an effect on the correlation of SPAD and NDVI values and the amount of yield. As the phenological phase progressed, the correlation between the measured results and yield has increased.
-
From Organic to Precision Farming (Contemporary Publication)
81-86Views:142The paper presents a short review of the different types of farming systems:
Biofarming, Organic farming, Alternatíve farming, Biodynamic farming, Low input sustainable agriculture (LISA)
Mid-tech farming, Sustainable agriculture, Soil conservation farming, No till farming, Environmentally sound, Environmentally friendly, Diversity farming
Crop production system, Integrated pest management (IPM), Integrated farming, High-tech farming
Site specific production (SSP), Site specific technology (SST), Spatial variable technology, Satellite farming.
Precision farming
It concludes that the various systems are applicable in different ratios and combinations depending on the natural and economic conditions.
The author predicts an increase in precision technologies , the first step being the construction of yield maps compared with soil maps and their agronomic analysis. Based on this information, it will be necessary to elaborate the variable technology within the field, especially for plant density, fertilization and weed control.
The changes in weed flora during the past fifty years based on 10.000 samples within the same fields using the weed cover method are presented. -
Seed treatment with Bacillus bacteria improves maize production: a narrative review
105-111Views:737Maize (Zea mays L.) is an important crop in relation to its production and consumption. Production of maize is constrained by soil infertility and poor quality seed. Microbial technologies like seed treatment with Bacillus bacteria improves the productivity of maize on infertile soil. However, due to variations in maize growth environments and Bacillus species, this review was conducted to identify the common species of Bacillus species used for seed treatment, and provide an overview of the effect of seed treatment with Bacillus on maize growth and yield. Results show that Bacillus subtilis, Bacillus pumilus and Bacillus amyloliquefaciens were the dominant species used for seed treatment. Bacillus was used as both a biofertiliser and biopesticide. The conspicuous positive effects of Bacillus were in plant height, shoot and root length, and shoot dry matter depending on the species. In terms of grain yield, Bacillus subtilis (8502 kg ha-1), Bacillus amyloliquefaciens (6822 kg ha-1) and Bacillus safensis (5562 kg ha-1) were the bacterial species that had an overall pronounced effect. The highest increase in grain yield was in the interactive effect of Bacillus megaterium + Bacillus licheniformis (18.1%) and sole Bacillus subtilis (15.6%), while Bacillus pumilus reduced grain yield by 4.8%. This shows that the improvement of maize productivity using Bacillus bacteria requires careful selection of the species for seed treatment.
-
Possibilities of Growing Artichoke (Cynara scolymus L.) in Hungary
126-130Views:188The domestication of choice broadening, special vegetable species offers new market possibilities in Hungary. The production of artichokes has good perspectives due to its high protein, vitamin and mineral contents and its wide usability. According to the literature, in Hungary it is worth examining the annual production technology, which has yet to be researched in our country. The basic aim of our work was to establish the annual production of artichoke in Hungary with scientific research.
In the experiment, 5 Italian sorts (Valetta di Roma, Gobbo di Nizza, Violetto di Romagna, Violetto S. Francesino and Precoce di Romagna), 1 American sort (Green Globe) and 1 Egyptian sort (Balady) were used. For one half of the plants, we tried to bring on bud-production appearing in the first year only with early planting, while we used also a gibberellic acid hormone treatment for the other half.
Only the sort Green Globe had yields in appropriate quantity (21.4 t/ha) and quality. The low yield and inequable quality of buds of the Italian and Egyptian sorts refers to the fact that these sorts are not applicable for annual production in Hungary. Although the gibberellic acid treatment resulted an earlier harvest, increased the equality of buds and increased the proportion of stems producing buds except for the sort Green Globe, overall it did not have a positive effect. The hormone treatment fastened the physiological processes of the plants, thereby it induced early insenescence and lignifying of the buds. The high temperatures during the bud-formation period largely increased the ratio of flabby, over-blowing buds, so the planting must be timed in the future that the harvest period is in early automn or late spring, early summer months.
According to our results, globe artichoke can become a perspective culture by applying cold-resistant sorts with short growing seasons, which can be produced as annual crops without hormone treatment by the appropriate timing of bud-formation. -
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:257For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Sunflower in Romanian agriculture
153-163Views:329Romania is one of the largest producers of sunflower closely followed by Bulgaria, Hungary, France and Spain. The total sunflower production increased after 1990, due the increase of cultivated surface during the moderate yield average increasing rate. Last year, Romania was ranked first in the European Union (EU) for the area cultivated with sunflower and the total production of sunflower seeds, according to the National Statistics Institute (INS). Romania's position on the map of sunflower producers area is supported by about 1 million hectares sown. In the segment of sunflower productivity, Romania has an unfavourable position, situated in the last places in the classification of the EU's most productive agricultures. In order to increase production per hectare, it is required to perform measures aimed at the elements of sustainable cultivation technology, including the stability of the production level by ensuring phytosanitary protection.
-
What does precision crop production hold for the future of soil science and plant nutrition?
411-421Views:295The concept of precision agriculture is straightforward at the scientific level but even basic goals are blurred at the level of everyday practice in the Hungarian crop production despite the fact that several elements of the new technology have already been applied. The industrial and the service sectors offer many products and services to the farmers but crop producers do not get enough support to choose between different alternatives. Agricultural higher education must deliver this support directly to the farmers and via the released young graduates. The price of agricultural land must be higher if well-organized data underpin the production potential of the fields. Accumulated database is a form of capital. It must be owned by the farmers but in a data-driven economy its sharing will generate value for both farmers and the society as a whole.
We present a methodological approach in which simple models were applied to predict yield by using only those yield data which spatially coincide with the soil data and the remaining yield data and the models were used to test different sampling and interpolation approaches commonly applied in precision agriculture. Three strategies for composite sample collection and three interpolation methods were compared. Multiple regression models were developed to predict yields. R2 values were used to select among the applied methods.
-
Effect of facility location on haulage efficiency
204-209Views:140In the 21st century, every economic sector must use the chances of evolution, technical and technological acquisitions, due to the level of competitiveness on the market. Such a sector as agriculture, where technology and the ideology of production are changing and adapting very slow to global expectations, by taking maximum advantage of opportunities, is a more central question. The greatest problems of Hungarian agriculture’s competitiveness are that this sector is very weak in capital and production costs make producers uncompetitive on the market. We can remedy this situation by using sources logically, purposefully and system approached. Logistics can provide the most useful assistance in such efforts.
In agricultural logistics, there is a great deal of uncovered territory. The aim is to transplant methods that are working correctly in other sectors into the agricultural sector, while maintaining development. One of the most important areas is transport logistics and material movement. Methods of analyzing and planning transportation and material movement found in professional literature do not take into account the specific needs of agricultural production. My aim is to examine the effect of facility location in the running of an enterprise. Through the results, I make suggestions for modifying the currently used logistic method and suggest further methods of examination. The effect of agro-specific needs must be examined in carrying out innovations and making logistical planning methods reliable. -
Evaluation of striptillage and conventional tillage in maize production
37-40Views:273Tillage changes soil properties and the way how the environment affects those properties. Soil properties and environment determine the rate of water movement in liquid and gaseous form into and out of soil. Based on the experimental database of the Institute of Land Utilisation, Regional Development and Technology of the University of Debrecen, Faculty of Agricultural and Food Sciences and Environmental Management and the KITE PLC, various cultivation systems were examined with maize (Zea mays L.) as indicator plant in Jász-Nagykun-Szolnok county. The sample area can be found in the outskirts of Kenderes on a meadow chernozem soil. On the examined plot, strip-tillage, subsoiling and moldboard ploughing were performed, each on 4.5 ha, respectively. The purpose of the present study is to compare these cultivation systems according to the soil- and maize kernel moisture content and to the yield based on the years of 2012 and 2013.