Search
Search Results
-
Effect of cropping technologies on the yield of dry bean variety ’Diana’
37-41Views:304An experiment on three dry bean varieties (Start, Hópehely, Diana), using different sowing-times, fertilizers and plant densities was performed on sandy soil in the University of Debrecen, Centre for Agricultural Sciences, Research Institute of Nyíregyháza in 2015. The aim of the experiment was to study which treatment gives the highest yield, and whether the different treatments result in significant differences in the yields. In this paper the dry bean yield at ‘Diana’ variety is analyzed.
The treatments were done with three fertilizer doses and three plant densities at different sowing-times (April 24; May 8; May 18). As a result of the high temperature and the drought during the growth season, the yields we harvested were in low, which shows the ecological sensitivity of the plant we examined.
We concluded that the poorest yield was harvested at the third sowing-time. There was no significant difference in the yields at the first and second sowing- time. Examining all the three fertilizer treatments we applied at the experiment, we achieved the highest yields in the control plots. It might be due to the weak efficiency of nitrogen fertilizer under the extremely dry conditions. The highest yield was harvested at the control treatments during the second sowing-time. Regarding the effect of the plant densities, the highest crop yield was achieved at the treatment using 400 000 germs ha-1, followed by 300 000 germs ha-1 and 200 000 germs ha-1.
-
Economic Assessment of Biodiesel Production for Hungarian Farmers
72-76Views:246Utilisation of oil of plant origin as a fuel is gaining acceptance in the European Union and elsewhere. Besides environmental protection, energy saving, and decreasing over-production of food. Additionally, the subsidisation of farmers and the development of rural sub-regions also contribute to its spread. This study specifically focuses on the direct effects biodiesel's raw materials and final products are now having on farmers, while reviewing and quantifying these effects. I have purposely restricted my analysis to these two elements of the biodiesel chain.
The biodiesel chain seems to be a great method for improving the economic and social position of participant farmers in many ways. Presently, the profitability of raw materials’ production looks to be the crucal point in the chain, and could be strengthened best with intensive, habitat-specific agrotechnic. It would only be possible to reach a favourable profit margin for farmers if yields reach unrealistic averages or if there is a significant hike of the 2000 producer’s price in the oil plant branch.
The main attraction of sunflower- and oilseed rape production lies in the stabilization of market conditions, which is not only gong to appear in oil plant branch but – thanks to the reduction of outputs – also in the cereal branches. Better economic safety for farmers may play a role at least on the same level as in plant production, which involves more risks than profit maximalization.
The reduction of the prime cost of biodiesel could be possible through the direct combustion of the whole oilseed plant or its residues or electricity production using them. Whereas energy demand for biodiesel production is low (appr. 5%) but it needs subsidization and the prices of natural gas and electrical energy presently look favourable in Hungary. Additionally harvesting and baling of the residues is technically problematic, which is why their use may seem to be reasonable just over the middle or long term. Another possible factor of cost reduction could be the centralization of some partial operations, which needs serious financial resources to reduce amortization cost per product, provided there be several biodiesel projects near each other during establishment. Creation and operation of a logistical system could also be a good method for improving the viability of the biodiesel chain, in order to optimize transport schedule and distances. However there are also some organizational difficulties in this case. -
Phytoplasma infection status survey in plum psyllid (Cacopsylla pruni) population
45-48Views:367European Stone Fruit Yellows (ESFY) phytoplasma disease causes an increasing amount of damage. This is especially true to the Gönci growing region. The insect vector of the disease, which has been shown to have a vector role during transmission experiments, is the plum psyllid (Cacopsylla pruni). In 2018, during the swarming period of plum psyllid, in 3 different settlements (Boldogkőváralja, Nagyvárad and Bekecs) 265 psyllidswere collected, from which 165 were plum psyllid. Molecular biology studies showed 106 individuals infected with phytoplasma, of which 20 were males and 86 were females.
-
Study of plant physiological parameters in winter oilseed rape (Brassica napus var. napus f. biennis L.) production on chernozem soil
111-115Views:623We made plant physiology examinations in Arkaso winter oilseed rape hybrid substance: relative chlorophyll content (SPAD) and leaf area index (LAI) measurements. The experiment was set in University of Debrecen Agricultural Sciences Center at Látóképi Experimental Station in four replications, in two different sowing times (I. sowing date on 08/22/2014 and II. sowing date on 09/09/2014 sowing againhappened because of the incomplete germination in the second subtance 01/10/2014) Three different plant density 200, 350 and 500 thousand ha-1, under the same nutrient supply, 45 cm row spacing. The experiment was green crop of winter wheat. The relative chlorophyll content (SPAD) and leaf area index (LAI) measurements were made in seven different times. We measured the maximum value of chlorophyll content in the first sowing time at 500, and the second sowing time at 350 thousand ha-1 plant density. The measurement results proved that there was a linear relationship between the number of plants and the LAI. The maximum leaf area index values we measured in both the sowing time at 500 thousand ha-1 reached.
-
Dr. Oszkár Tóth awarded by „Antal Gulyás medallion for crop protection“ in 2011 (laudation)
11-15Views:273The Public Utility for Development of Crop Protection Teaching (NOFKA) and The Hajdú-Bihar County Regional Association of Hungarian Chamber of Crop Protection Specialists and Plant Doctors (Chamber) established a joined Award Committee in September of 2011, which intend to serve as moral appreciation to prominent persons with excellent achievements by awarding the „Antal Gulyás medallion for crop protection” which are available for outstanding teachers, researchers, and practical crop protection specialists. The biography of late Antal Gulyás distinguished professor of plant pathology is available in a separate article of this issue.
The first person to be decorated with the „Antal Gulyás medallion for crop protection” is Dr Oszkár Tóth retired reader of plant pathology for his excellence in teaching crop protection. Dr Oszkár Tóth had been involved in teaching - by delivering both lectures and practical lessons - crop protection, namely plant pathology in the legal predecessor institute of Debrecen University for more than 30 years where generations of crop protection specialists were encouraged to get a thorough knowledge in plant pathology. The one-time students of the splendid teacher welcome and congratulate to the award, moreover wish him peaceful and happy years. -
Woolly cupgrass (Eriochloa villosa /Thunb./ Kunth), a recently occured invasive weed in Trans-Tisza Region and a trial for control in maize
53-57Views:727To the effective control of invasive weeds are essential to prevent establish, if has already happened obstacle to massive accumulation, and promoting the efficient and rapid eradication, if it is possible. The Woolly cupgrass (Eriochloa villosa /Thunb./ Kunth) belongs to weeds which “hard to control” especially in corn. One of the difficulties of effective control is the prolonged emergence causing avoidance of several individuals the contact with pre-emergent herbicides. Another problem arises due to the intensive use of post-emergence herbicide products with short duration of action. To optimalize of timing of treatment is essential for successful control of later emerging weeds. The recently established Woolly cupgrass in Hungary shows resistance or reduced susceptibility to substantial portion of herbicides used in corn. The data collected from small-plot trials demonstrates that application of sulfonylurea or selective monoctyledonous herbicides can be effective against the Woolly cupgrass.
-
Investigating the above-ground biomass values of sweet potatoes (Ipomoea batatas)
35-39Views:449The role of sweet potato tubers in human nutrition is not new. The above-ground biomass of sweet potatoes is not used for nutritional purposes in most countries, but it has a high biological value. Therefore, the aim of the present study is to investigate the production of press fibre from above ground biomass by wet fractionation. Two sweet potato varieties (purple- and white-fleshed sweet potato) and two types of irrigation system were used: bubbling water flow system (BWS) and continuous water flow system (CWS). Glucan, xylan, arabinan were analysed by HPLC and elemental content was measured by ICP-OES. Our results show that the total carbohydrate content in the pressed fibre of the leaf blades (27.64–29.88 %w/w) is lower than in the stem with petiole (51.14–57.36 %w/w). No significant difference in glucan, xylan and arabinan content was observed in the leaf blade. In the stem with petiole, significant differences were observed for xylan and arabinan contents. For elemental content, generally higher values were measured in the leaf blade than in the stem with petiole. This information may be relevant for the selection of the appropriate variety and treatment, even for the production of functional food.
-
Changing of some parameters of the soil-plant system as an effect of different composts
262-266Views:455Composting is an alternative way for practicing site-specific and environmental friendly plant nutrient supply. Our aim was to study the effect of different composts on plant and soil system.
Pot experiment with acidic sandy soil blended with three composts in five (0%, 5%, 10%, 25% and 50%) proportion was set up. Our experimental plant was perennial ryegrass (Lolium perenne L.). After the harvest of ryegrass we measured the fresh and dry weight of harvested plants, the P-, K-, Mg-contents, and the pH of soils.
The three composts had different effect on dry weight production and on nutrient-supply of soil. We established that one of the compost had significantly larger effect on the dry weight of ryegrass compared to the others. In this study we proved that favourable compost/soil proportion is different in the case of different composts. -
The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
105-110Views:1211The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.
-
Biological potential of plant pathogenic fungi on weeds: A mini-review essay
59-66Views:773The invasion of weeds into productive areas has substantial negative effects on native ecosystems as well as agricultural production systems globally. Consequently, the task of maintaining or restoring these systems will become increasingly challenging without consistent, ongoing management efforts. The intensifying emergence of herbicide resistance in numerous weed species, coupled with the unintended pollution caused by synthetic herbicides, underscores the growing necessity for alternative, environmentally friendly, and sustainable management techniques, such as the utilisation of bioherbicides. Plant pathogenic microbes play an important role in biologically management of weeds, with the utilization of plant pathogenic fungi emerging as a promising area of study for novel research trends aimed at weed management without reliance of herbicides and to mitigate environmental pollution. A potential solution to decreasing pesticide usage involves the development of bioherbicides containing fungal active ingredients. Among the most commonly utilised fungi in bioherbicides are genera like Alternaria, Colletotrichum, Cercospora, Fusarium, Phomopsis, Phytophthora, Phoma, and Puccinia. Increased weed resistance to herbicides has influenced new strategies for weed management, with some fungi from genera such as Colletotrichum and Phoma already employed for weed control. Nonetheless, it is evident from reviews that further research is imperative in this domain, with particular emphasis on analysing the efficacy of each plant pathogenic fungi.
-
The Role of Cultivation Systems in Quality Sugar Beet Production
134-138Views:678Producing sugar beet, as it is a demanding field crop, has contributed to the raising standard of plant production. It has an outstanding place among the plants that are cultivated in the intensive plant production system. Rentability of sugar manufacture is determined by the stability of yield and the quality (saccharose content) of sugar beet. In this way, the fundamental interest both of the producers and the processing industry is high yield and quality, year by year. The yield and the quality of the sugar beet are mainly determined by the plant production system, so we studied the effect of fertilization, irrigation and plant protection.
-
The application of bentonite and zeolite for soil amelioration in acidic sandy soil
131-137Views:382In a pot experiment, we have studied the effect of bentonite and zeolite in different dosages [control; 5; 10; 15; 20 g kg-1] on acidic (pHH2O=5.65) humus sandy soil. The experiment was set up in 2007 and 2008 in the greenhouse of the UD CASE Department of Agrochemistry and Soil Science. As a test plant, perennial ryegrass (Lolium perenne L.) was used.
In laboratory examinations, pH(H2O), pH(KCl), hidrolytic acidity, nitrate-N content, readily available phosphorus and potassium content were determined. Among soil microbial parameters, the total number of bacteria, the cellulose-decomposing bacteria, the carbon-dioxide production, the microbial biomass-C content of soil, and the saccharase enzyme activity were measured. In the experiment the biomass of the test plant was determined.
The effect of bentonite and zeolite in different dosages can be summarized as follows:
− The pH increased under the effect of low dosages. With the increasing of the pH the hydrolytic acidity - at the bentonite treatments significantly – decreased.
− Regarding the readily available nutrient content of the soil, low and medium dosages proved to be effective. High dosages of bentonite treatments reduced the nitrate-N content, the readily available phosphorus, and potassium content of soil, by zeolite treatments the high dosages reduced the nitrate-N content of soil.
− Regarding the measured soil microbial parameters in both treatments low and medium dosages proved to be also effective, but the high dosages didn’t cause decreasing at the total number of bacteria, and by zeolite treatments the biomass-C content of soil.
− Also the bentonite and zeolite treatments enlarged the biomass of the test plant. We experienced significant increasing by bentonite treatments by the effect of medium and high dosages, while in zeolite treatments only the high dosage caused significantly increasing in plant biomass. The largest dosages decrease the plant biomass.
− Under the statistical analysis we found many medium and tight correlation between the studied parameters. -
Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
105-110Views:255In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.
-
Physiological plasticity of main tree species of lowland hornbeamoak forest as a results of forest gap regeneration
99-103Views:497Specific leaf area (SLA) of English oak (Quercus robur L.) and hornbeam (Carpinus betulus L.) as members of Querco robori-Carpinetum were investigated in two different habitat in terms of gap forest management: in the gap and in the inert forest. The artificial opening process of the forest resulted in more light for growing saplings and need for acclimatization. Photosynthesis is one of the most important ways for plant life and plant production basically influenced by altered light condition resulted in opening process. Efficient photosynthesis is important for plant life, plant production, but species-dependent plasticity of photosynthesis makes one species more tolerant, than others. The specific leaf area is acceptable parameters for characterising plant production, dry matter content and leaf structure. The dry matter content based on known leaf area is higher in oak both sun and shade leaves, than hornbeam. The different place of leaves in the canopy of trees did not influence the values of SLA.
-
Technological development of sustainable maize production and its effect on yield stability
379-388Views:423In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Testing a biological active plant extract’s antifungal effect against soil fungi
247-252Views:272In Hungary today is about 5 million hectares of agricultural land contaminated with ragweed. The ragweed problem a year is about 60 billion HUF to be paid, of which 30 billion are used to reduce the agricultural damage. Experiments with ragweed pollen has mainly been carried out in connection with terms of allergy. The other biochemical experiments and studies with this plant, have so far been the scientific horizons of public life, boosted the edge. We wanted to demonstrate that the ragweed, which is a weed, containsbiological active (for example: antifungal) compounds. For our experiments in the previous cycle of flowering, plants were collected manually, with its roots and with each plant part. The extraction of the substance from dry plant – meal was carried out using appropriate solvents. The biological activity of ragweed-extracts were tested against fungi isolated from soils and meadow with different mode of cultivation. Our results suggest that ragweed contains biologically active substances, which inhibit the growth of fungi, depending on the concentration of active ingredients of the plant.
-
The main influencing factors effecting the yield of maize
137-141Views:358Maize is one of Hungary’s major cereals. In the 1970s and 1980s, we were in the frontline regarding yields and genetic advancement. However, yield fluctuation in maize has increased to 50-60% from 10-20% since the 1980s, which was partly caused by the increase in weather extremes due to climate change and by agrotechnical shortcomings.
The experiments were carried out on typical meadow soil in four repetitions in the period of 2007-2008. In the sowing time experiment, sowing was performed on 10 April, 25 April, 15 May under a uniform fertilization of N120, P2O580 K2O 110 kg/ha. In the fertilization experiment, the yielding capacity of 10 hybrids with different genetic characteristics was studied in a control (non-fertilized) treatment and basic treatment of N40 P2O5 25, K2O 30 kg ha-1 active ingredient and a treatment with fivefold dosages of the basic treatment. In the plant density experiment, the relationship between plant density and yield was analysed at plant densities of 45, 60 and 75 thousand plants per ha. We found a tight correlation between sowing time and yield and grain moisture content at harvest. We found that grain moisture can be reduced by 5-10% by applying an earlier sowing time.
The agroecological optimum fertilizer dosage was N 40-120, P2O5 25-75, K2O 30-90 kg ha-1 active ingredient at a plant density of 60-90 thousand plants ha-1 depending on the hybrid and the year. -
Effect of molybdenum treatment on uptake of plant and soil molybdenum content in a field experiment
117-122Views:639Molybdenum is not a well-known microelement, but being a constituent of several important cellular enzymes it is an essential microelement. Molybdenum occurs in all foods, but at very low levels. There does not appear to be any particular foods or types of foods, which in the absence of extrinsic factors, naturally have high levels of molybdenum. However, environmental pollution, from natural or anthropogenic sources, can lead to high level of the metal in plants.
Our study is based on the long-term field experiments of Nagyhörcsök, where different levels of soil contamination conditions are simulated. Soil and plant samples were collected from the experiment station to study the behaviour of molybdenum: total concentration, available concentration, leaching, transformation, uptake by and transport within the plants, accumulation in different organs, phytotoxicity and effects on the quantity and quality of the crop. In this work we present the results of maize and peas and the soil samples related to them.
According to our data molybdenum is leaching from the topsoil at a medium rate and it appears in the deeper layers. In the case of plant samples we found that molybdenum level in the straw is many times higher than that is in the grain, so molybdenum accumulates in the vegetative organs of the plant. The data also show differences in the molybdenum-uptake of cereals and Fabaceae (or Leguminosae). -
Rye plant parameters in the Westsik crop rotation experiment
39-45Views:286Our research work was carried out in the Westsik crop rotation field experiment in 2018. The main research purpose was to analyse the effect of the different organic and chemical fertilizers on parameters of rye. Our results revealed some differences between the different fertilization methods. One spike weight, grain weight of one spike, rye plant height, rye plant weight per m2 and 1000 seed weight in crop rotations VII, XV and VIII were different from the data of all crop rotations. This finding can be explained by the fact that crop rotations VII and XV were non-fertilized, only 23.3 t ha-1 straw manure (VII) or green lupine manure was applied as a second crop (XV). In addition, crop rotation VIII consists of four parts where we apply chemical fertilization with green lupine manure as a main and second crop. There is a positive close correlation between rye plant height and other studied characters (rye plant weight per m2, spike length, weight of one spike, grain weight per spike, spike weight per m2, grain weight per m2 and 1000 seed weight).
-
Using sensors in precision crop production
267-270Views:308Proper plant nutrition that takes into consideration both the requirements of plants and ecological conditions is one of the most important precondition of successful plant production. An important element of the N-fertilization of wheat is that the optimum zone of nitrogen supply is significantly narrower than that of other plant species, therefore it can easily happen that we apply higher or lower nitrogen doses than the optimal one. A possible solution to this problem can be precision agriculture. Applying the methods of precision agriculture we can take into consideration the heterogeneity of fields. By applying precision methods either online or offline we can intervene faster than if we would rely only on regular soil and plant analysis procedures. The determination of the doses of nitrogen and the timing of application are influenced also environmental and
economic aspects. The chlorophyll content of the leaves indicates the nitrogen status of plants, since there is a relationship between the nitrogen content and the amount of chlorophyll in the leaves. According to plant analysis results there was a strong and significant relationship between the values of the NDVI (Normalized Difference Vegetation Index)and the total nitrogen content measured in the leaves. -
Investigating the potential for dual-purpose use in winter oats
35-42Views:523Dual-purpose usage is not a common technology for oats in Hungary, which is not surprising, as the area sown to our main crop is also very low. Yet the crop has a lot of untapped potential, not to mention its excellent nutritional parameters. In our experiment we investigated how much biomass can be expected after mowing winter oats at different phenological stages and whether we can expect a valuable grain yield after this process. Mowing was carried out at one-week intervals on a total of 4 occasions with 2 cutting heights. Plant height and NDVI values of the vegetation in the plots were measured during the experiment. After the harvest of the fully ripened grains, the yield and the thousand kernel weight (TKW) were determined. Our results show that with a lower cutting height (6 cm), a higher biomass yield can be achieved. The cutting height had no statistically verifiable effect on either NDVI or plant height. Droughty weather conditions during subsequent mowing significantly reduced the regeneration capacity of the plants, which was strongly reflected in the measured parameters. Furthermore, a higher grain yield was measured at a cutting height of 9 cm, which decreased gradually with the mowing time. Neither the cutting height nor the mowing time had any effect on the TKW.
-
Deproteinized plant juice as part of circular economy: A short review and brief experimental data
23-26Views:1925As the population of the Earth is constantly growing it generates an unmet demand for protein, which is an urgent problem. The protein extraction process is a potential solution, which offers high-quality plant protein suitable for animal and human nutrition at a favorable price. The process used within our project produces green juice from the green alfalfa biomass through pressing. After the coagulation of protein from this green juice, the by-product is called DPJ (Deproteinized Plant Juices) or brown juice. Our preliminary results match the international literature, namely that brown juice take up as much as 50% of the fresh biomass in weight. To utilize this by-product is a crucial part of the process to make it environmental-friendly and financially viable as well. The examined brown juice samples came from a small-scale experiment of alfalfa varieties carried out in the experimental farm at the University of Debrecen. According to our preliminary results, brown juice has high macro- and micronutrient values, furthermore, it has a potentially high amount of antioxidant compounds. The study highlights that brown juice is suitable as an ingredient in microbiological media, in plant nutrition as a supplementary solution, for feedstock and for preparing human food supplements or functional foods. The potential utilization of all biorefinery products makes it a very appropriate technology for today’s challenges.
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:444Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Effect of arsenic treatments on the element content of green peas
203-208Views:660The agricultural environment is contaminated with heavy metals and other toxic elements, which means more and more threats. One of the most important toxic element is the arsenic (As).
The objective of the study was to investigate the effect of As-treatments on the element content of the different parts of the green peas (root,stem, leaf, pod, pea) in the 4. phase of the plant development. Plants were grown in green house. Arsenic was applied in a form of arsenate (As[V]) and the plants were treated with 0, 3, 10, 30, 90 and 270 mg kg-1 arsenic.
According to the results the Ca content of root and pod was increased in the case of the 3 mg kg-1 As-treatment, after that decreasing tendency was observed. In the case of the 270 mg kg-1 As-treatment, the Ca content in the root was increased, because some element is able to concentrate in the lower biomass. The Ca-content of stem and leaves was reduced when the plants were treated with more than 30 mg kg-1 As. The lowest As-treatment (3 mg kg-1) increased the Na content in the root, stem and leaves, however in the case of the higher As-dose, decreasing tendency was observed. In the case of the generative plant parts the 3 mg kg-1 As-treatment also increased the Na content, nevertheless in the case of the higher As-treatments lower Na content was measured, however in the case of the highest As-treatment (270 mg kg-1) the Na content was increased in the generative plant parts, probably the Na was concentrated in the lower biomass. In the case of the 90 and 270 mg kg-1 As-treatment the Mo-content also was increased in the generative plant parts. The 270 mg kg-1 As-treatment caused a similar tendency in the case of the generative plant parts as a result of the lower biomass. In the case of the pod and leaves, the lower As-doses did not cause significant changes.
The Mo content was increased in the root and pea when the plants were treated with 3 mg kg-1 As, but in the case of the higher treatments it was decreased. In the case of the stem it was reverse, the lowest As-tretament (3 mg kg-1) decreased, nevertheless the further As-doses increased the Mo content. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:406In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.