Search

Published After
Published Before

Search Results

  • Effects of Cropping Year and Artificial Fertilization on Alveographic Quality of GK Öthalom Winter Wheat Variety
    126-133
    Views:
    89

    Qualification of winter wheat became more complex for Hungary, after the expansion of the EU. Use of Chopin alveograph is a general method in Western- and Southern Europe. This method is not traditional in Hungary, so determination of alveographic properties of Hungarian winter wheat varieties is very important. Artificial fertilization is one very important component of applied agricultural engineering, which effects winter wheat quality. The another factor is the weather or rather the cropping year, which effects winter wheat quality too. We examined both of them and the alveographic quality of GK Öthalom winter wheat variety between 1996 and 2003.
    We found that cropping year has significant effect on the alveographic quality of GK Öthalom winter wheat variety on each treatment of artificial fertilization. We found no connection between quantities of precipitations of vegetation periods and the W values of GK Öthalom.
    We found a strong connection in 1999 and 2003 as well as a very strong connection in 1996, 1997 and 2002, between the increase of fertilizer dose and W values of GK Öthalom. Treatments of artificial fertilization had a significant effect to W values of GK Öthalom in 2001 and 2002. The differences between the two methods are because of large standard deviation of the results.

  • Studying of quality parameters of Hungarian and Greek honey samples
    147-153
    Views:
    146

    Honey has been a valuable food for mankind since ancient times. It was the only sweetener until the start of industrial sugar mass production. Honey plays an important role in our nutrition and its positive effects on health are well-known. The quality of Hungarian honey is perfect, so it is very important to safeguard and monitor its quality continuously and to build up a good traceability and quality assurance system. For such a system, it is necessary to study the nutritional properties and the origin of different honey samples. In our study, we study Hungarian and Greek honey.

  • Research on rheological characteristics of winter wheat varieties
    266-272
    Views:
    113

    The gluten examination test is dominant in Hungary, comparing it to the qualification system of other countries. The determination of alveographic parameters is a basic criterion of winter wheat specifications in some western and southern European countries.
    In the Hungarian and foreign winter wheat qualification systems, in the standards, there is no limit for extensographical parameters. Customers dictate the limits and make their claims as to the specifications.
    We analyzed the alveographic and extensographical parameters of 19 winter wheat varieties grown by the Cereal Research Non-Profit Company in Hungary, and we made a comparison between the results in the challenges of the European Union expectations.
    Examining the information of alveographic and extensographical values, we found that the experimental varieties provide high base to flour types suitable for baking bread and baker’s ware. The GK Élet, GK Petur, GK Memento, GK Csillag, GK Kapos and GK Marcel varieties can meet the market of paste flour needs, too.
    In the variety series, the GK Kalász represents the highest values and the GK Garaboly shows the lowest parameters regarding the alveographic W and the resistance to extension.
    On the basis of relation, we can establish that we can estimate the following little known and used quality indexes: the extensographical resistance to extension with extensographical energy and the alveographic W value, the extensographical energy with the alveographic W value and the alveographic P and L values with the other alveographic parameters.

  • New possibilities to determine wheat quality parameters by near-infrared spectroscopy
    65-69
    Views:
    139

    Analyses and methods in wheat quality determination require more sample, time, work and cost, thatswhy flour quality control needs rapid, reliable tools. Near-infrared spectroscopy has many advantages, which make it suitable in quality control. NIR instruments need calibrations to their work. In our study we examined gluten content, falling number, valorigrpahic waterabsorption, alveographic P/L and W value of wheat samples. Modified partial least squares analyses on NIR spectra were developed for each property. The results show that we got such calibration modells, which are able to predict the properties (expect falling number) with enough accuracy.

  • Molybdenum - accumulation dynamics of cereals on calcareous chernozem soil
    81-85
    Views:
    97

    This work is about the molybdenum-accumulation of cereals analyzing soil and plant samples from a field experiment set in
    Nagyhörcsök by Kádár et al. in 1991.
    In this long-term field experiment different levels of soil contamination conditions are simulated. Soil and plant samples were collected
    from the experiment station to study the behaviour of molybdenum.
    In this report results of maize, winter wheat, winter barley and soil analysis are presented. The conclusions are as follows:
    – Analysing soil samples from 1991 we have found that roughly half of the molybdenum dose applied is in the form of NH4-acetate+EDTA soluble
    – Comparing element content of grain and leaf samples we have experienced that molybdenum accumulation is more considerable in the  vegetative plant parts
    – Winter wheat accumulated less molybdenum then maize in its vegetative parts. Comparing molybdenum content of winter wheat to winter barley we found that the concentration of the element in wheat was lower by half than in the winter barley. It seemed that molybdenum accumulated to the least degree in winter wheat.

  • Comparison of alveohraph and extensigraph properties of winter wheat samples
    27-30
    Views:
    100

    The rheological properties of dough are determined by the amount and proportion of gliadin and glutenin proteins. Extensibility and resistance to the extension of doughs which can be measured using the extensigraph or alveograph allow good assesment of the baking behavior under realistic conditions. In our study, we compared the extensigraph and alveograph parameters of 87 flour samples. The results showed that the alveograph parameters were different from the extensigraph parameters. The classification of wheat varieties was different, and the order of varieties, as well. The alveograph properties were affected by other factors than the extensigraph properties, except the W value. The two rheological tests did not give similar results, therefor neither test are replaceable.

  • Molecular Biological Approach of Crocus sativus L. and its Allies
    112-115
    Views:
    120

    The hay saffron (Crocus sativus L.) is a sterile triploid plant, known in human culture only, with no fertile seeds produced. The origin of saffron is still a mist, however it is assumed to be an autopoliploid mutant or a hybrid. The recent classification and most of the former taxonomic publications define C. sativus to be derived from C. cartwrightianus, a wild species. Because of the sterility of hay saffron it seemed to be reasonable to apply molecular biological methods to complete classical taxonomic studies in examining its relations. The DNA polymorphism based AFLP method has confirmed the close relationship between these species.

  • Application of the SDS-PAGE method for the characterisation of winter wheat flour quality
    112-118
    Views:
    101

    The principle, development and importance of the SDS-PAGE method are presented in this article. The SDS-PAGE method has become one of the basic methods of molecular biological research, because it is widely applicable and its sensitivity is excellent in the separation of wheat storage proteins.
    We have shown the application of this method with a concrete example. It was also tested whether, it was possible to obtain a better baking quality product from a large amount of poor quality less valuable wheat by fractioning the flour according to particle sizes after grinding. We studied the rheological properties of flours with different particle size fractions from the original flour. The baking quality of the original flour was B2. The 125-90 and 90-63 μm fractions have significantly better baking quality (B1) than the original flour. The protein contents of these flour fractions were also significantly higher than the protein content of the original flour. We had a question: what has influenced the baking quality: the protein content or other factors? We searched for an explanation on these results in the protein composition of the flour samples. We studied the distribution of glutenin-fractions by SDS-PAGE method and evaluated them. We found with correlation analysis that the amount of LMW-Glutenin D-group (52-60 kDa) is in a strong, negative correlation to the baking quality (r = – 0.855*). Therefore, the baking quality of flour samples was influenced by this glutenin fraction.

  • Parameter optimization of an inductively coupled plasma mass spectrometer for measuring arsenic and selenium
    81-85
    Views:
    143

    In the last decades, an increased interest has evolved in arsenic and selenium. The aim is to understand the environmental, agricultural and biological roles of these elements. In the case of arsenic, the major reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking water bases of some Asian countries, as well as Hungary. The toxicity of higher level selenium content is also known; nevertheless, selenium is essential for several biological functions. Considering its essentialness, in our country, the insufficient selenium intake rate causes a lack of selenium. Measuring the concentrations of these elements provides crucial, but unsatisfactory information, as the speciation, i.e. the form of an element presented in a sample is also required.
    In both cases, the most suitable method to determine concentration is inductively coupled plasma mass spectrometry (ICP-MS). Our objective was to optimize the variable parameters of the ICP-MS to attain the lowest (the best) detection limit. For this purpose, we investigated the effect of parameter change on net signal intensity and relative signal intensity. With the optimized parameter settings, the limits of detection for arsenic and selenium were determined, which are 0,032 ng dm-3 for arsenic, and 0,097 ng dm-3 for selenium. 

  • Application of the Collision Cell (CCT) in the ICP-MS Analytical System
    120-125
    Views:
    130

    Our laboratory has seen a sharp rise in the number of requests for the analysis of smaller and smaller concentrations of elements from foods, plants, soil, organic fertiliser, irrigation and ground water, sewage, sewage sludge, raw material of food, as well as human and animal origin samples. From the above elements the inductively coupled plasma mass spectrometer is capable of analysing the smallest concentration of elements. Our method of analysis is to use our ICP-MS instrument, together with a ICP-MS with Collision Cell Technology (CCT). The CCT method has better detection limit, with 1-3 magnitudes, compared to the normal ICP-MS analytical method. The CCT has better detection limits mainly for the following elements in the periodical system: analysis of arsenic, selenium, germanium, vanadium and chromium. Additionally a collision cell can be applied for the analysis of silicium, sulphur, zink, copper, iron, calcium, magnesium and potassium in smaller concentrations.

  • Study of effects on quality of different wheat flour fraction
    123-129
    Views:
    96

    Wheat is one of the most important cereals in the world and the bread made of its flour belongs to the everyday life of human mankind.
    The Hungarian standard relating to the laboratory production of wheat flour (MSZ 6367/9-1989) does not mention the type of laboratory mill used for milling, and it only builds up some general criteria, such as: the laboratory mill should be provided with four differently nicked barrels, a sieve with appropriate hole sizes, and also with the separated collections of the pilot flour and the bran. Our study was started at this point and the answers for the following questions were aimed to be found: do the flour patterns studied and produced with different grinding and sieving
    techniques, widely used in laboratory mills of the same wheat pattern show any alterations after the impact of the formula production as regards chemical constitutions and reologic parameters. Various flours and whole grains of the wheat patterns sieved with different particle sizes were studied in this experiment. In producing this pattern two different mill types of FQC 109 and CHOPIN CD 1 as well as two different grinder types such as PERTEN 3100 and type of RETSCH 200 were applied. There were 3 different corn sizes of 160; 250; 800 μms used in the partition of the fractions. To study the differences the following  measurements were conducted: dry matter, ash, protein content, wet gluten content, gluten index, gluten expansiveness, farinographic value, falling number and amilographic rate.
    The results this research confirm that the quality of wheat flour can be modified by different methods of pattern production. In all cases the differences can be explained by the flour-bran ratio, and in some of the cases the higher germ content of the fractions also played a role. The results show differences between the various types of mills and grinders, too. 

  • Food safety of plant origin food
    161-164
    Views:
    154

    Expectation regarding changes related to food production, transportation, distribution and marketing have changed considerably in several regions of the world over the past decades. It is especially true for highly industrialized countries where not only the food security is important but the food safety is essential too. The concentration of production – processing – distribution involves the danger on the one hand products of unsuitable quality from point of view of nutritional physiology and the other hand ones that may contain substances harmful to human health will become widespread among consumers. We investigated the heavy metal, pesticide remains and mycotoxin content of different plant products.

  • Investigations on Mud on Heavy Metal Contaminated Flood-Plain of Tisza
    96-101
    Views:
    91

    At the beginning of the year 2000 subsequently to a mine accident high heavy metal content mud entered the catchment area of the Tisza and was transported through the whole Hungarian section of the river. The majority of the heavy metals had been bounded to the floating sediment that was deposited on the flood-plain soil during flood forming a new, 5-10 cm thick layer. In the mud samples collected after the flood there was a clearly visible dark grey layer with significantly higher heavy metal content that was formed by the pollution wave and it was sorruonded by a light layer. The upper layer of flood-plain soils are formed from this mud layer during the soil development process, so the amount of Lakanen-Erviö soluble heavy metals that correlate with bioavailable heavy metal content was examined as well. In this case only the lead content was significantly higher in the dark layer.
    New mud samples were collected after the 2001 flood. Separate layers could not have been identified, their colour was similar to those of the previous year’s light layers’. Comparing to this light layer the total Zn and Lakanen-Erivö soluble metal content was significantly lower in the mud samples of the year 2001. While the proportions of total and Lakanen-Erviö soluble metal concentrations were equal in both of the layers regarding the elements, these ratios have significantly changed next year regarding Pb and Zn: the amount of Lakanen-Erviö soluble metals considerably decreased.
    As a result of sequential extraction the heavy metal content was rather low in the water soluble and exchangeable and NaOH-soluble fractions, so heavy metals found in the mud could be released in greater amount only in case of a heavy acidification.

  • The effect of climatic change on the rheological properties of winter wheat doughs
    96-100
    Views:
    77

    In present paper we have examined the effect of climatic change on the extensigraph characteristics of wheat-flours. The baking quality
    of winter wheat is largely determined by cultivar, but it can be influenced by weather conditions during growing period. Flours were from 5
    cultivars grown at one location in three cropping years. We have found that the extensigraph properties of dough are affected by the weather
    conditions, nevertheless, different cultivars distinctly react to the increase of temperature and decrease of precipitation. In generally, the
    higher average day temperature and lower precipitation level is favourable to produce winter wheat flour with better quality

  • Optimization of inductively coupled plasma mass spectrometer parameter’s to measuring arsenic and selenium
    59-64
    Views:
    160

    In the last decades an increased interest has been evolved about arsenic and selenium. The aim is to understand the environmental, agricultural and biological role of the these elements. In case of arsenic the mayor reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking waterbases of some Asian countries besides Hungary. The toxicity of higher level selenium content is also known, nevertheless selenium is essential for some biological functions. Considering its esssentiality, in our country the insufficient selenium intake rate couse lack of selenium. Measuring the concentrations of these elements are cruital but not satisfactory information, but the speciation, that is the form of an element presented in a sample is also required. 
    In both cases the most suitable method to determine concentration is the inductively coupled plasma mass spectrimetry. My objective was to optimase the changeable parameters of the ICP-MS for reaching the lowest (the best) detection limit. For this porpuse I have investigated the effect of parameter change on nett signal intensity and relative signal intensity. With the optimased parameter settings the limit of detection for arsenic and selenium were determined, which are 0,032 ng cm-3 for arsenic, and 0,097 ng cm-3 for
    selenium.