Search
Search Results
-
Investigation of application and development of precision irrigation technology
239-248Views:215Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
-
Analysis of Disinfection Technologies that can Increase the Efficiency of Indoor Logistics Processes, which has been Reduced due to the COVID Pandemic
62-71Views:130As a result of the Coronavirus, both supply chain and internal logistics processes at factories have changed a lot. In many areas, the effectiveness of the logistics processes has declined because of the restrictions implemented against the virus. The study lists some adverse effects where logistics processes had to be modified due to the changing and protection measures against or negative effects of the virus. The authors also argue that these restrictions decreased the efficiency of logistics processes and workers' productivity. One option to increase the logistics sector's efficiency is to use air purification technologies, like the ones studied in this paper: UV-C, Bioxygen® or plasma-ion decontamination technologies. These disinfection processes can create a safe indoor environment. The authors analyse the examined technologies with SWOT analysis. The analysis results demonstrate which disinfection application is the most beneficial to help in improving indoor air quality for logistics processes.
-
Review of Modern Vehicle Powertrains and Their Modelling and Simulation in MATLAB/Simulink
232-250Views:987Thanks to technological advances and environmental standards, as well as changing usage patterns, road vehicles are constantly developing. Electric and hybrid vehicles are playing an increasingly important role in today’s road transport. The most significant changes are probably in the powertrain of vehicles. The efficiency of internal combustion engines increases while their emissions continue to decline. In addition, high performance electric motors, batteries and even fuel cells play an increasingly important role in hybrid and electric vehicles. In this publication, we review the drive systems of current modern vehicles and the types and characteristics of their major components. We also review the available models and computer programs for their simulation, focusing mainly on MATLAB/Simulink applications. Based on this, we can develop our own models and simulation programs which will help us to perform different driving dynamics simulations and to compare the performance, dynamic and energetic characteristics of these powertrains and their components to each other.
-
Tips and Tricks for Making Examination in Moodle
123-131Views:131Electronic exams made with the Moodle system can greatly facilitate the examiners job, but only few people use this option. This paper will review the examination system of the Moodle, the uploading of the question bank, the creating of the test, and the range of the available statistics. Then answers some frequently asked questions and misunderstandings, and give tips and show tricks related to secure examinations.
-
Numerical Modelling and Simulation of Sheet Metal Forming Process
1-6.Views:117Simulation and modelling of sheet metal forming process are well common today in different industries (automotive, aerospace) and several research centers regarding its huge impact for both on production and reliability of the lifecycle of the equipment, and the quality of the product. However, to obtain the best configuration possible with the inputs parameters to achieve high level of production and increasing the durability of the tools needs some extra methods for the optimization for this problem using mostly finite element method cooperated with iterative algorithms based on Artificial Neural Network (ANN) [1]. Whereas this research is focused on modelling of stamping process of stainless steel AISI 304 to investigate to formability of the material, and studying the influence of the friction factor on the quality of the product as well the energy required for each set configuration.
-
Dynamic Tests on a Series Wound DC Motor. Simulation of the Braking of the Vehicle Driven by the Motor
15-20Views:72In the following we present the role and contribution of vehicle dynamics simulation to vehicle development in the University of Debrecen Faculty of Engineering. We present the input technical parameters which are necessary for the simulation of the series wound DC motor – which drives the vehicle – and also the procedure for their measurement together with the results of dynamic test measurements on the motor. The latest version of our vehicle dynamics simulation program –which is capable of the simulation of braking too – is also presented here.
-
Algorithmization in Playful Way
105-111Views:77In the “Extending the Technical Researcher Capacity, Developing Research Services and Building a Knowledge Square in Engineering Education” sub-program of the EFOP-3.6.1-16-2016-00022 "Debrecen Venture Catapult Program" project a research group on engineering and innovation skills was founded. This team undertook to develop skills development workshops for high school students in connection with mathematics, physics, descriptive geometry and informatics topics. In this paper the "Algorithmization in playful way" workshop will be presented, where we develop the student's algorithmic skills by playing computer games.
-
PDCA – How does the Organization Learn?
1-9Views:399An organisation (whether it is in the private or in the public sector)knows where it is headed, it has a vision. To achieve this vision the organisation can have a strategy beforehand or the vision can be the result of a continuously improving strategy.The strategy can be developed according to the earlier routines or in a totally new way. Many times failures help to find a solution better than the chain of successes. The lessons learned should inevitably be part of the following cycles otherwise the same issues rise again and again which finally ends in exasperation and giving up. When we create a learning process it is easier to focus on avoiding the obstacles than motivation. PDCA is a well-known method for it but what prevents us from applying it the proper way? What are the obstacles that prevent the organisation from developing through its learning processes?
-
Neutral Inhomogeneity in Circular Cylinder Subjected to Axial Load on its Lateral Boundary
35-42Views:132In this paper we consider the problem of single circular elastic inhomogeneity embedded within a circular cylinder whose curved boundary surface is subjected to surface traction acting on axial direction. We investigate the displacement neutrality of the coupled system of host body and inclusion. Neutral inhomogeneity (inclusion) does not disturb the displacement, strain and stress fields in the host body. The deformation of the considered inhomogenneous cylinder is antiplane shear deformation.
-
Enclosed Garden
25-33Views:141The archetype of the enclosed garden is the medieval hortus conclusus, which make the perfect type from the former types. The enclosed gardens of nowadays have developed from the hortus conclusus, which behave like a prism. Peter Zumthor's Serpentine Gallery Pavilion is the best example for the contemporary hortus conclusus. The purpose of our study to make a typological collection about contemporary enclosed gardens. The base of the typology is the borderline of the garden, the wall of the garden. We based the study of borderline to Dom Hans van der Laan's architectural theory and his monastery building in Vaals. We analyze the typology by six contemporary enclosed gardens from the simple wall to the building volume through the volumes of the wall. The openings of the walls can be the next way of our analysis.
-
Torsion of Truncated Hollow Spherical Elastic Body
234-240Views:116This paper deals with the torsion of a body of rotation whose shape is a truncated hollow sphere. The material of the truncated hollow sphere is isotropic, homogeneous and linearly elastic. To solve the torsion problem, the theory of torsion of shafts of varying circular cross section is used, which is introduced by Michell and Föppl. Analytical solution is given for the shearing stresses and displacements. A numerical example illustrates the application of the presented solution. The results of the presented numerical example can be used as a benchmark problem to verify the accuracy of the results computed by finite element simulations.
-
Development Opportunities of Health, Wellness and Sports Services in Medical Tourism Based on a Research Study
101-114Views:264The quality and quantity of additional services play an increasing role in the competitiveness of service providers in the tourism sector. In our research, our goal was to explore the service development possibilites of two different sites of a Northern Hungarian healthcare institution in the framework of a market research. In the field of services, we focused on different issues of health, wellness and sports services. Our research has shown that the availability of additional services and therapeutic recreational, sport or wellness services are important for patients as they can positively influence their quality of life and health status.
-
Pure Bending of Homogenous Isotropic Elastic Curved Beam
67-75Views:39In this paper a detailed analysis is given for the pure bending problem of curved beams. The material of the curved beam is homogenous isotropic linearly elastic. The mantle of the curved beam is stress free and there is no body force on the curved beam. The plane of the curvature of the beam is the plane of symmetry for the whole beam. Paper gives the expressions of circumferential and radial normal stresses. A strength of material approach is used to derive the governing equations. A numerical example illustrates the application of the presented solutions.
-
Review of Drive Systems Applied in Modern Vehicles
728-732Views:143In this publication we review the drive systems of modern electric and hybrid vehicles. We also discuss the various types of electric motors, batteries, as well as fuel cell systems applied in them. Furthermore, as an important part of hybrid vehicles is the internal combustion engine, we review the literature about the methods used to.
-
Wind Tunnel Making in Practise
19-24Views:91In this paper, we examined the low speed wind-tunnels. Our goal is to construct an open flow system windtunnel that can be utilized in our measurements. To make such a wind-tunnel we needed to build a prototype and calibrated with the help of measurements. Than we determined the flow at the area of measurement. Finally results of the measurements satisfied our expectations. Although there is still much more in development that we would like to do based on the newly gained experience.
-
An Analytical Solution for Static Problems of Cantilever Curved Beams with Variable Cross Sections
226-233Views:120This paper gives an analytical method to obtain the deformation of a cantilever curved beam. The curved beam considered has circular centre line and the thickness of the cross section in radial direction depends on the circumferential coordinate. The kinematics of the Euler-Bernoulli beam model is used to formulate of governing equations. The curved homogeneous and isotropic elastic beam is fixed at the one of the end cross section and on the other end cross section is subjected to concentrated forces and a couple. A numerical example illustrates the applications of the derived formulae.
-
Risk Management Requirements in Management Systems
314-323Views:228The management system standards published by the International Organization for Standardization (ISO) contain requirements related to risk management activities. The objective of the current research is to identify the relevant risk management requirements and creating the integral risk assessment method in Quality Management System (QMS), Environmental Management System (EMS) and Information Security Management System (ISMS). In my research I prepared a risk management requirement matrix, which can help the organisations to understand the relevant requirements of the three examined standards. The developed integrated risk assessment method allows the application of a common risk assessment table concerning the three standards.
-
An Analytical Solution for the Two-Layered Composite Beam-Column with Interlayer Slip and Constant Axial Load
14-31Views:45The authors present an analytical solution for the two-layered composite beams with imperfect shear connections. The considered beam is simply supported at both ends. The beam is subjected to transverse and axial loads. The kinematic assumptions of the Euler-Bernoulli beam theory are used. The connection of the beam components is perfect in normal direction, but the axial displacement field may have jump. The shear axial force derived from the imperfect connection is proportional to the relative slip occurring between the layers. The determination of the analytical solution is based on the Fourier method. Two examples illustrate the application of the presented analytical method.
-
The Role of Stocks in the Supply Chain
515-526Views:1069Az ellátási lánc teljesítményét nagymértékben befolyásolja a szereplők készleteinek összetétele, nagysága, rendelkezésre állása. A végső fogyasztókért vívott versenyben kiemelt szerepe van a kiszolgálási színvonalnak, hiszen az ellátási láncok ugyanazokért a fogyasztókért vívnak versenyt, és a fogyasztók döntése leginkább e két tényező, mint a készlet nagyága és a kiszolgálás minőségétől függ. A tanulmány a kkv-k logisztikai problémáit feltáró kutatás része, melynek célja rávilágítani a jellemző nehézségekre, és azokra a kihívásokra, amelyek legtöbbször elkerülik a logisztikai- vagy ellátási lánc vezetők figyelmét. A fejlődő kkv méretű vállalkozások versenyképessége - ami magába foglalja a költségek nagyságát is, kapcsolódva a K+F tevékenységhez vagy vállalat növekedéshez – a lekötött tőke mértékével arányosan változhat, melynek jelentős részét képezik a készletek. A kutatásban résztvevő vállalat, a Diego Kereskedelmi Kft. készletezési politikáján keresztül kerül elemzésre a készletek összetétele, illetve a velük kapcsolatos kockázatok, illetve félreértések. A tanulmány célja továbbá a helyes megoldások elősegítése, melyhez szorosan kapcsolódik (az itt tárgyalásra nem kerülő) Lean megoldások támogató szerepe.
-
The Effect of MMS Lubrication on Surface Roughness During Machining
452-457Views:74I display this paper the chipping front metal of cutting allocated geometric, considering particular the friction. I catch the attention energy's balance sheet someday metal of cutting, open one new direction the manufacture technology. I display this new direction's metal of cutting condition. but built I delineate his paper final division this new policy searching programme, consumed trial instruments as well as the evaluation's mode.
-
Sections of Hungarian Contemporary Architecture and Fine Arts
115-122Views:148In my study I have examined the sections of Hungarian contemporary architecture and fine arts. In the historical overview it has become clear that two turning points have influenced contemporary arts: the total art work (Gesamtkunstwerk) of the Ghotic and Baroque styles. I listed the sections in three categories: metamorphosis, relationship and section. The sections are the highest level of these categories. I explained my research in detail by analyzing these sections, at János Megyik's art and his Gate statue at Life Science building and library at the University of Debrecen.
-
Analysis of Driving Data of Lorries on a Certain Route
347-352Views:103In this paper the development of a driving cycle for lorries traveling a certain route is presented. A typical transportation route has been selected, which used by lorries instrumented with the proper data-collecting equipment. We used these on-board units to collect data over a long time period in the real-life traffic. We filtered the collected data, and carried out a statistical evaluation on the basis of the measured data.
-
Control of Metal Trading Activities, in Particular the Purchase of Scrap Metal
457-465Views:132Over the past decade, the metal trade was a frequented area of the black economy. The transformation of the legal background of registration and reporting obligations has played an important role in the change of the situation. There were several steps taken to whiten metals trade such as introduction of the reverse charge, then a few years later, the possibility of nationalization, the metal Act and the related decree. From the impact of all these the authors introduce the influence of registration and reporting obligations related to certain acquisitions of enterprises engaged in metal trading activities.
-
Prediction of FLD using Abaqus and Gurson Model for Simple Flat Spacemen
32-44Views:71In the past century, in many industries, such as, metal forming industry, it has been important to predict ductile damage and fracture of metals under complex loadings. Regarding damage mechanics, one of the most classical models is the GTN, which was originated from Gurson and later enhanced by Tvergaard and Needleman. The inprovement was achieved by introducing an equivalent void volume fraction f and two more parameters called q1 and q2 into the yield function of Gurson’s model.
-
The Situation of Digitization in the Hungarian Food Processing Industry
196-209Views:341Thanks to various technologies, such as nanotechnology, the next decades will completely transform the individual production processes and sectors. With the rapid advancement of information technology, the digitalization and automation of industrial processes pose new challenges for food business operators. Hungarian food companies will be able to keep up with their competitors and be the winners for the next decades if they can successfully adopt these technologies. However, this requires a strong focus on digitization, digital strategy, and directing investment, technology change and R&D activities in this direction. Digitization is one of the decisive directions of the future, which is why I felt it essential to study the level of digitization of Hungarian food companies, IT infrastructure and Internet usage, the use, and role of enterprise management systems, decision support and business analysis tools, and business readiness, Industry 4.0 technology change. Based on the 205 evaluable responses to the questionnaire, it can be said that only a tiny proportion of Hungarian food companies have a digital strategy and only a few have digital transformation.
