Search
Search Results
-
Operational Feasibility Assessment of Geothermal Heat Harnessing Systems
46-53Views:148Renewable energy sources are now essential to establish sustainable development. This paper examines one kind of source the geothermal energy. For geothermal energy when combined with a heat pump COP can be used for evaluation. For solely geothermal sources different approach is needed thus in the paper, a new geothermal heat production coefficient is used to examine the operational feasibility. For the assessment, many hypothetical buildings were created to model their heat demands. Two types of calculation methods are used for heat demand calculation. Based on the results, the maximum depth of a geothermal borehole and economically critical qualitative coefficient was concluded.
-
Reduction of Energy Use for Heating in Detached Houses using Passive Technics
64-76Views:126Reduction of energy use in buildings continue to be one of the most important goals in this sector. The aim of our research was to analyse the effects on the heating energy demand of passive technics. In the case of a detached house the energy savings using mass wall, Trombe-Michel wall and sunspace was determined. The calculations have been performed in the case of a building with average thermophysical characteristics and in the case of a building having similar geometry but its external building elements fulfilling the requirements of nearly zero energy buildings. It was proven, that some of the mentioned technics may lead to higher energy demand for heating, so a complex energy analysis has to be carried out before implementing them.
-
Technical Issues and Their Effect on the Financial and Time Scheduling of the Building Under Roof and/or Floor Upbuilding
324-343Views:105Building under roof and/or floor upbuilding raises technical issues different as one raise in the case of green investments. Primarily, depending of system of building constructions of the existing building there is a possibility to build under roof, and/or floor upbuilding. In the paper we review those technical issues, what decide, that in the case of given building there is or not possibility to build under roof, and/or floor upbuilding. We examine in general, that in the case of building under roof, and/or floor upbuilding what building process should be considered, and what kind of time and financial scheduling is advisable to prescribe. We will present a case study, that the inadequate processing of technical issues may require time and financial rescheduling.
-
Energy-Efficient Buildings, a step towards Sustainability in Pakistan
109-124Views:247With every passing year, energy consumption in the world is increasing drastically. Most of the energy comes from fossil fuels which are also depleting in a fast manner. Buildings consume a significant amount of energy all over the world and the demand for energy is also increasing unremittingly in buildings. Developed countries are taking profound measures in order to make buildings energy efficient and sustainable by achieving nearly zero energy stage. Pakistan is facing a serious energy crisis from the past few decades. The building sector in Pakistan deserves special attention in this regard since the energy consumption in buildings in Pakistan is feverishly high. Many types of research have been carried out in Pakistan by the United Nations and Energy Department of Pakistan in order to devise applicable methods that not only provide thermal comfort to the occupants but also make a building energy efficient. Renewable energy also plays an important role in compensating building energy demands. It is easy to achieve nearly zero energy state in a good energy efficient building if it is coupled with renewable energy sources then it will make it self-sufficient in energy demand. A survey is also carried out to determine the thermal comfort of the occupants in different types of areas. Also, solar energy analysis is also taken into account to highlight the solar power potential in Pakistan. Several recommendations have also been suggested to implement energy efficiency measures in Pakistan.
-
Mixing Power Requirement Determination in Agitated Drum Using Dimensional Analysis
76-88Views:135The mixing of granular materials in an agitated drum can be characterized by the dimensionless power equation. The equation was created by dimensional analysis, for which the parameters affecting the mixing power requirement were collected based on the literature. The most important of these are the rotational speed, the drum loading factor, the geometric and physical properties of the mixing drum and the granular materials. The dimensionless power equation is used to estimate with reasonable accuracy the Power number within the given range of applicability , which has been validated by measurements. From the Power number, the mixing power requirement of the mixed granular material can be calculated, which can be used as operational data for selecting the mixing motor.
-
Self-developed Controller System –based on Open-Source Applications
97-105Views:94In the University of Debrecen Building Mechatronics Research Centre faced by the application of building automation technology, are tackled by cutting edge research performed at the Research Centre. The embedded device system, the focus of the ongoing project at the Research Centre, is programmable, reconfigurable, and adjustable. The design of an efficient embedded system must meet regulatory requirements, for optimizing building energy efficiency. The system provides solutions for a range of industrial applications, and peaks the interest of building services providers (e.g. SMEs).
-
The Alternative Use of Straw
331-343Views:114The problem addressed in this work is to examine the feasibility of using straw in innovative and alternative ways, focusing on aspects of cost sensitivity in subject areas of building investment and energy compsumption. I analysed the energy efficient performance of a straw bale building and compared that with those of a conventional construction, a newly-constracted building and a passive house. In my study I assessed the figures of costs of emboided energy, primary energy consumption and carbon dioxide emission. I made calculations in terms of energy costs for a lifespan of 50 years. Considering that straw-bale construction uses an excellent and sustainable insulation material, its energy use is by 25.38% less than that of conventional construction.
-
Examination of Infrared Tomato Drying
303-309Views:88Tomato is a highly perishable food, thus preservation is required to meet the continuous market demand compared to the unbalanced yearly production peak. The aim of this paper is to show a detailed insight into infraradiation based drying process. Furthermore, to widen the possible usage range of a well-known approximation method for describing the temporal moisture variation in function of process parameters. The mass decrease of tomato slices was examined, in function of specific radiation power, heat source and sample distance, in forced and natural airflow. Based on the results dimensionless moisture ratio change over time was fitted as an exponential function, which may be used in industrial drying process optimization.
-
Calculations of Performance Losses for Automobile Vehicles
210-218Views:209Vehicle-energetic-models are used to analyze the performances and when a comprehensive structure is established even optimization could be done. For these kinds of models, the losses of the vehicles have to be known. These losses could significantly effect of the vehicle fuel consumption. From these losses the rolling resistance, drive elements and aerodynamic drag are discussed. This paper reviews some of the literatures that describes the calculation methods and gives us some idea about the degree of their value. Our further goals are to have an UpToDate loss coefficient dataset and calculation methods for further vehicle-energetic modelling.
-
The Fire on the Körönd By The Eyes of an Engineer Part. III. The Second Time of Averting of Life-Danger, Preparation on Conservation
1-15Views:88The roof and the closing floor of the building located Andrássy Street 83-85. damaged by the fire on the Körönd. We describe the damages caused by fire, and present the state of the building after damage caused by fire.
-
Material Stock and Flow Analysis within the Agricultural Building Sector Based on Local Database
297-320Views:123The purpose of the paper is to analyze on micro level the stream of building materials needed for raising cattle. The scope of the produced material flow chart will cover the inflow and storage of the materials. The overall objective of material flow analysis is to contribute to the data inventory development process which is needed to use these construction materials as secondary raw materials in the future. The assessment is based on a concrete new development in a Hungarian region being carried out nowadays as a development and modernization of an existing cattle raising farm. Driven by the concern of resource depletion, further research on higher level, based on larger database will be needed to verify the estimated national level results for the magnitude of growth of anthropogenic stocks.
-
Constantly Changing: Revitalization of Our Existing Building Stock with a User-centric Approach Through the Comparison of Three Hungarian Examples
94-110Views:533Our built environment’s community-oriented spaces are rapidly becoming obsolete in response to current social, cultural and economic demands. The renovation project of the tímárház Szárító műhely in Debrecen presents a new potentional transformation model in the region with a focus on community-creating and cultural awareness. The incremental, cost-effective small-scale intervention and adaptive reuse of the building’s spaces provide an opportunity to preserve its values and swiftly respond to evolving needs. In order to validate the underlying principles of the interventions proposed in the plan, it will be compared to two similar-minded examples, the Művészeti Ellátó in Eger and Szabadkikötő in Pécs. The projects were examined through the processes occuring within their respective life cycles, as their transformations exhibit recurring patterns. The analyses were conducted based on interviews with the creators, online articles, studies and on-site visits.
-
Economic Analysis of Thermal Insulation Systems
1-5Views:88One of today's most important problem of inadequate energy management. In Hungary, most of the buildings considered to be outdated in the building materials used and taking into account the construction technology. A significant part of the heat energy used for heating purposes before leaving the environment through the building envelope elements used in time. In our study we investigate whether an average house how much energy you can save the facade walls with insulation.
-
Development of Analysis of Loss Sources of Vehicles
733-737Views:161Vehicle fuel consumption can be significantly influenced by various types of losses such as loss from bearing, aerodynamic drag and rolling drag. It is important to highlight that fuel consumption reduction can be only achieved when those losses are reduced that are induced during the operation.
The aim of our work group is to define the calculation method and the magnitude of the losses of the vehicles. These parameters are intended to be serve as input parameters for future energetic modelling of vehicles.
-
Building Information Modelling: Present realities and Future possibilities
377-394Views:122BIM (Building Information Modelling), a term that is drawing the attention worldwide in the construction industry and governments, is a complex concept that involves management effort, tools and applications for enhancing information flow and therefore productivity for projects. This article pretends to briefly explain BIM, its advantages, challenges and potentialities while considering the current adoption of the concept in some countries. Furthermore, the article includes suggestions for the implementation of BIM in an organization as well as in projects and a list with some useful tools for this purpose.
-
Examination of an Office Building's Energy-Producing Opportunities Using the Temperature Frequency Curve
63-67Views:78In our study we would like to choose the energy generating system for a business center in Mátészalka. The
system will cover the heating energy demand of shops and offices of the building. The heat demand of the building
was calculated by a computer program. The energy demand was calculated with help of the Temperature
Frequency Graph. In our study we choose bolilers and heat-pumps. We compared their operating costs. -
Numerical Model Analysis of Myring–Savonius wind turbines
180-185Views:172Nowadays the importance of renewable energy is growing, and the utilization of the low wind energy potential is getting crucial. There are turbines with low and high tip speed ratio. Turbines with low tip speed ratio such as the Savonius wind turbine can generate adequate amount of torque at low wind velocities. These types of turbines are also called drag machines. The geometry of the blade can greatly influence the efficiency of the device. With Computational Fluid Dynamics (CFD) method, several optimizations can be done before the production. In our paper the Savonius wind turbine blade geometry was based on the so-called Myring equation. The primary objective of this paper was to increase the power coefficient by modelling the effect of the wind on the turbine blade. For the sake of simplicity, a 2D cross-sectional area was investigated in the simulation with ANSYS CFX 19.1.
-
Numerical Model Analysis of Natural Gas Combustion Burners
67-71Views:131Traditional power plants still the dominating power source for all the major industries and powerdemanding facilities, the most crucial facility for the whole plant operations is the industrial boiler which generatessteam, heating energy or electrical power. Boilers generate energy by combustion. The improvement of combustion efficiency could greatly influence the energy consumption and will make the boiler more efficient and cleaner (less emissions), that’s why it is important to understand the combustion and thermal flow behaviours inside the boiler. Beside experimental testing, computational work nowadays becoming more and more important due to lower cost and acceptable accuracy with minimum error. With numerical calculations method, the computational model created by a Computational Fluid Dynamics (CFD) software could reduce a lot of trial and error on experimental work. In this paper utilizing the ANSYS FLUENT 19.1 software to make crate the combustion model. The ratio of air to fuel mixture, the equivalency factor, mass flow rate of the mixture, velocity, mass fractions of the mixture components (fuel and air) and their temperatures will serve as the input parameter while the exhaust gase component mass fraction, temperature, mass flow and velocity will be monitored.
-
Enclosed Garden
25-33Views:151The archetype of the enclosed garden is the medieval hortus conclusus, which make the perfect type from the former types. The enclosed gardens of nowadays have developed from the hortus conclusus, which behave like a prism. Peter Zumthor's Serpentine Gallery Pavilion is the best example for the contemporary hortus conclusus. The purpose of our study to make a typological collection about contemporary enclosed gardens. The base of the typology is the borderline of the garden, the wall of the garden. We based the study of borderline to Dom Hans van der Laan's architectural theory and his monastery building in Vaals. We analyze the typology by six contemporary enclosed gardens from the simple wall to the building volume through the volumes of the wall. The openings of the walls can be the next way of our analysis.
-
Control Valve Testing During Operation
11-18Views:92The most commonly used control technology in building engineering is mixing. The purpose of the measurement is to find out what effects have the different control valve position combinations on the system. How the mixing efficiency changes in these cases.
-
A márkázás hatásainak vizsgálata a fogyasztói magatartásra két FMCG vállalat példáján keresztül
1-16Views:468Over the last few years, companies have realised the significance of the image they represent and besides building the brands of their products, they started to concentrate on forming the brand of the company.We wanted to examine the world of corporate brands at two FMCG (fast moving consumer goods) companies. The aim of there search was to discover the connection between consumers and brands, product brands and corporate brands; how corporate brand influences customers during purchased ecision making. The effect of consumers’ knowledge was also observed about the companies on consumers’ habits. We have assumed that from the viewpoint of some customers, choosing among several products is often based on the perception of the brands and products alone and it has little to do with the corporate brand. Although, if one of the companies has a strong corporate brand, an idea built around it, and its message is communicated effectively, when it comes down topic king sides, the brand of the company could be essential to decision making.
-
Algorithmization in Playful Way
105-111Views:87In the “Extending the Technical Researcher Capacity, Developing Research Services and Building a Knowledge Square in Engineering Education” sub-program of the EFOP-3.6.1-16-2016-00022 "Debrecen Venture Catapult Program" project a research group on engineering and innovation skills was founded. This team undertook to develop skills development workshops for high school students in connection with mathematics, physics, descriptive geometry and informatics topics. In this paper the "Algorithmization in playful way" workshop will be presented, where we develop the student's algorithmic skills by playing computer games.
-
Linear elastic finite element investigation of titanium specimen produced by Additive Manufacturing
85-91Views:81Nowadays orthopaedic implants are mainly fabricated from solid material (titanium alloy). The mechanical properties of these implants are much stronger than human bone tissue’s properties, and this leads to fixation problems and a short lifetime, but today these problems can be eliminated with the usage of metal additive manufacturing. The mechanical properties of the implants can be influenced on demand with the variation of the material structure using different sizes and types of unit cells for building up its structure.
-
Geotechnical Risks and its Influence on Investment in the Case of Vacant Locus
298-312Views:95At a building on vacant locus a significant amount of geotechnical risk can be arisen. In the case of arise of risks the technical content of the investment is amended, the time requirement as well as the cost of the investment is increasing. In the paper a review on the geotechnical risks, on their effects, as well as on the management of risks is given.
-
Sections of Hungarian Contemporary Architecture and Fine Arts
115-122Views:157In my study I have examined the sections of Hungarian contemporary architecture and fine arts. In the historical overview it has become clear that two turning points have influenced contemporary arts: the total art work (Gesamtkunstwerk) of the Ghotic and Baroque styles. I listed the sections in three categories: metamorphosis, relationship and section. The sections are the highest level of these categories. I explained my research in detail by analyzing these sections, at János Megyik's art and his Gate statue at Life Science building and library at the University of Debrecen.
