Search
Search Results
-
Six Sigma in preconstruction: case study on improving of reinforcement steel processing
49-60Views:75Lean process improvements are crucial for enhancing production efficiency. In my research, I examine the application of the DMAIC methodology to develop the MEP facility within the framework of lean Six Sigma. Highlighting the challenges of precast concrete production, my study details how lean management aids in efficient process design and measurement. Introducing lean Six Sigma methodology involves standardizing processes and ensuring their effective development, contributing to the facility's efficiency
-
The Impact of Optical Character Recognition Artificial Intelligence on the Labour Market
9-16Views:353Because of present day information technology, there is neither need to plant complicated computers for more millions price if we would like to process and store big amounts of data, nor modelling them. The microprocessors and CPUs produced nowadays by that kind of technology and calculating capacity could not have been imagined 10 years before. We can store, process and display more and more data. In addition to this level of data processing capacity, programs and applications using machine learning are also gaining ground. During machine learning, biologically inspired simulations are performed by using artificial neural networks to able to solve any kind of problems that can be solved by computers. The development of information technology is causing rapid and radical changes in technology, which require not only the digital adaptation of users, but also the adaptation of certain employment policy and labour market solutions. Artificial intelligence can fundamentally question individual labour law relations: in addition to reducing the living workforce, it forces new employee competencies. This is also indicated by the Supiot report published in 1998, the basic assumption of which was that the social and economic regulatory model on which labour law is based is in crisis.
-
Topology optimization and rim design
92-101Views:273A goal of this article is to show the development of the car wheel rims along with the progress of the manufacturing technologies over the past few years. To achieve this goal, topology optimization and generative design usage have been reviewed in this work. The research has focused on the main factors, which affect the life of car wheel rim, and it has shed the light on the effect of the topology optimization and the generative design on the manufacturing of the car wheel rims. Since the main factors above-mentioned are the: forces, material preferences and topology optimization, the study has covered the results of the studies made on each part along with the technology progress. Moreover, the article has explained the methodology main steps of the topology optimization and the generative design and their principles.
-
Qualitative and Quantitative Analysis of Optical Industry Produced Grey Water, Proposal For Treatment Technology
84-88Views:88Our research we investigated Carl Zeiss Vision Hungary Kft. grey water from laundry. Our research aims to provide the optical industry produced grey water quality and quantity parameters to obtain a comprehensive picture. The quality parameters for additional aim was to test, whether it is worth tut collect grey water produced in the optical industry to the place of origin. Subsequently, the development of a treatment technology that economically it would be valuable for the company. It has been observed that it is not necessary tut collect grey water from washing machines and cleaning machinery, since it is similar to the organic load them. It was based on a financial assessment of the grey water treatment technologies in two technologies: coagulation-flocculation and aerobic bio membran technology. Investment and maintenance costs in respect of the implementation of the aerobic clearly bio membran technology proved to be more economical.
-
Servant, Ethical and Authentic Comparative Analysis of Leadership Styles in the Light of the Challenges of the BANI World
1-10Views:49In a globalised and accelerated economy, managers are under increasing pressure to reconcile organisational goals that are independent from human being with the reality of human relationships. The human being, as a being with intellect and senses striving towards happiness, is the focus of positive leadership styles and is their major concern in the field of management theory. In this article, three such positive styles, authentic, servant and ethical leadership principles and their operating conditions are compared using international literature. The literature time span of about two decades shows that the evolution of the ethical leadership literature has slowed down, while the authentic and servant leadership literature has continued to evolve and is still evolving today. The comparative table that appears in this study highlights both commonalities and distinctions, in that, in addition to high moral and ethical standards, the authentic style focuses primarily on the person of the leader, the ethical leader on the ethical standards of the organisation, while the servant leader focuses on the development of the well-being of the subordinate, the other person, even through self-sacrifice. We intend to use the results of this research to investigate measures of positive styles, preparing the scientific ground for future primary empirical field studies.
-
Global Inversion of Pressure Dependent Acoustic Velocity Data Based on a New Rock Physical Model
47-55Views:136In this paper with the further development of our previously published single exponential model, the new multiple exponential model describing the pressure dependence of acoustic longitudinal wave velocity is presented. Since with increasing pressure in the rock several relaxation mechanisms at the same time can cause the increasing propagation velocity, the new model can handle two or more physical mechanisms (e.g. the closure of pore volume or microcracks or friction on grain boundaries etc.). The previously applied linearized inversion procedure can trap in a local minimum, so during laboratory measured longitudinal velocity-pressure data processing a global optimization method was used to find the absolute minimum. Using the developed model equation as response equation in a Simulated Annealing algorithm the petrophysical parameters of the model can be determined. Inversion results proved that the calculated data using the new model and algorithm matched more accurate with measured data on a rock sample.
-
The Effect of Player Transfers on Football Companies Valuation
Views:243Transfer seasons are one of the most highlighted periods in world of football. The market of player rights forces the greatest european clubs with their enormous budgets to compete with each other in order to aquire the most talented and most succesful players. It is not uncommon to sign players for tens of millions of euros, to this extent these expenditures are seriously affecting clubs bottom line. However, despite the expenditure nature of player transfers the value of these clubs increase, based on the best known measurer for companies valuation: the stock exchange. In my research the effect of player transfers ont he valuation of football corporations are presented through market value development of stock market listed clubs namely Juventus and BVB Dortmund. Based on my results if the examined clubs were signing players according to a player transfer policy considered as succesful the value of examined clubs had increased through stock market price independently of player transfer balance. Moreover the effect of coronavirus could had been noticed, since both clubs valuation decreased heavily in the 2020 summer transfer window probably due to the revenue loss caused by the pandemic.
-
Investigation of application and development of precision irrigation technology
239-248Views:227Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
-
Analysis of the Supply of Sport Services by Organizational Aspects
465-474Views:274The spread of consumer societies has led to the commercialization, and the emergence of profit-oriented operating frameworks in the fields of sport. The sports enterprises, involved in the operation of competing groups on professional, spectator fields of sport have already been examined from legal, economic, organizational points of view by a number of international and Hungarian researchers. In this article, we attempt to cover and summarize the Hungarian research approaches on this subject. The motive behind our investigation is that we should launch an organizational examination of the Hungarian profit-oriented sports suppliers in the near future. We plan to analyse the property, financial, income, organizational, management and labor management related situation of these sports enterprises. In order to ground the research, the review nature summary of domestic economic, organization science related secondary examinations is essential, which allows the development of the appropriate research methodology and the comparison of our results with the antecedents.
-
The Special Aspects of Leasing as Long-Term Asset Financing Method in Hungary
115-128Views:584Leasing has become widespread in the world in the 1970s, while in Hungary the first leasing firms appeared in the 1990s. The authors in this article introduce the most prevailing and most often used forms of leasing and their main characteristics in Hungary. Based on the statistical data of the 2008-2015 period the authors analyse the performance of investments, the volume of trade in the total leasing market and the course of the amount of capital assets and new capital investments on the level of the national economy. The conclusion of the current article is that the changes of the investment’s performance in the national economy and the EU development funds influence greatly the course of the Hungarian leasing market.
-
Opportunities in circular agriculture
17-23Views:239Water is the source of life. For the long-term preservation of water resources it is very important to develop sewerage and sewage treatment. Sewage sludge is not primarily a waste that needs to be disposed of but also a secondary raw material or a renewable energy source. Municipal sewage sludge, and sewage sludge composts, contain relatively large quantities of organic matter, so agricultural utilization can be a major potential of its use. The transition to sustainable agriculture is becoming more urgent and increasingly important as it can provide a solution that looks to the future. Sustainable agriculture should work according to natural law, so it should be self-sustaining, that means, cycles, where in to one process the waste created can be used as raw material in the other process. The beneficial effects of sludge on soil include increasing soil organic matter content, increasing soil fertility, nutritional capacity, microbiological activity, and complex fertilizing effects. However, when is applicated, there is always a problem with the occurrence and accumulation of toxic elements and drug residues. The traditional model of economic activity is the linear model. This model ignores the high economic social, and environmental costs of exploiting, transforming and removing of the resources therefore it is not sustainable in the long term. The circular economy offers an alternative model in which the products materials and resources are maintaned as long as possible and the amount of waste is significantly reduced or lost. It is also possible adapt the overtuned ecological, biological balance of agricultural production systems, with a closed loop circular model. According to this model, the development of tillage technologies and the restoration of organic materials and nutrient supply are possible.
-
The Location of Energy Plantations in the Sowing Structure and Its Evaluation with Linear Programming
255-269Views:108The research is examining traditional arable crops and woody plants on the basis of their marginal contribution. Calculations of income, expenditure and revenue were made on the grounds of sectoral technologies, which were the basis of the value of marginal contribution of the given sectors. As the linear programming model is quite comprehensive, we used this method for our calculations. To compile our model, we have gathered all the necessary information from farmers of the region of the Northern Great Plain. The missing data was completed from the databases of the Hungarian Central Statistical Office (KSH), Institute for Agricultural Economics Research and Information Technologies (AKII) and the Statistical Office of the European Communities (EUROSTAT). In some cases, we also used data of the Agricultural Administration Office and the Ministry of Agricultural and Rural Development. Our goal is to compile a 12-year production structure that suits for the characteristics of the region of the Northern Great Plain by achieving the maximum marginal contribution of a feature-farm.
-
Dynamic Tests on a Series Wound DC Motor. Simulation of the Braking of the Vehicle Driven by the Motor
15-20Views:91In the following we present the role and contribution of vehicle dynamics simulation to vehicle development in the University of Debrecen Faculty of Engineering. We present the input technical parameters which are necessary for the simulation of the series wound DC motor – which drives the vehicle – and also the procedure for their measurement together with the results of dynamic test measurements on the motor. The latest version of our vehicle dynamics simulation program –which is capable of the simulation of braking too – is also presented here.
-
Simulation of Hot Rolling by Cellular Automata
190-195Views:194Our research is focusing to one of the most complex and important production step of flat rolled products that is the simulation of hot rolling. During hot rolling two phenomena as work hardening and the process of regeneration of crystals has strong influence for physical properties of microstructure of aluminium alloys. It needs to be taken into account in case of rolling technology steps and development. When we talk about aluminium the dynamic softening in fact it is dynamic recovery that is followed by dynamic recrystallization. It goes in the same order of magnitude rate. But in steels the recovery has only a minor effect. Hot rolled and newly modified grain structure is influenced by these dynamic phenomena. Hot rolled grain structure goes through significant changes under further production steps like cold rolling and heat treatments. But aside from these intermediate production steps the microstructure that we get after hot rolling has significant effect for mechanical and grains structure of the final flat rolled product. Proper technology planning is essential that for cellular automata simulation method can ensure useable and good solution for the simulation of recrystallization.
-
Macroeconomic Analysis of Expenditures on Education as Human Capital Investments
520-530Views:136The importance of actions on adaptation to economic change associated with the knowledge-based economy has continuously grown both regional and national level. Individuals' flexibly adjust and the knowledge acquired in all forms of education is very important factors in the evolving knowledge-based economies. We examine the fiscal and private expenditures on education among OECD countries between 2005 and 2013, and we analyse the development of education expenditures with particular attention to Hungary.
-
Comparison of R&D innovation indicators of the visegrád group
162-172Views:76Innovation is a crucial strategic issue not only for businesses to maintain and improve competitiveness, but also has paramount role at a macroeconomic level how a national economy is able to contribute to the national division of labour. Innovation and research and development are particular and even more crucial in post-socialist countries which are trying to catch up with Western Europe in an economic point of view. We compared countries in the Visegrád Group in the study regarding their innovation indexes, R&D indicators and corporate innovations. These indicate that countries in the Visegrád Group are lagging behind the European Union. The Czech Republic ranks the first place in almost each aspect among the countries in the Visegrád Group. As for time series indicators, there is a steadily improving tendency in R&D. Regarding measuring innovation and R&D, it can be concluded that perfect method and scorecard are not available, indexes based on varying methods may generate different results and decision taking only one index into consideration cannot be made in business practice. In my opinion, R&D indicators are dominant to a large extent in comprehensive innovation indexes that might be misleading in the assessment of innovation (particularly in corporate innovation).
-
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
21-26Views:125LASER treatment widely used in material processing technologies. The annealing is not the typical application of the LASER treatment, but this is possible to apply in case of cold deformed metals. In the article a cold rolled EN AW 8006 aluminum sheet is annealed by LASER treatment. The microstructure of the annealed sheets is observed by optical microscopy. An existing cellular automata simulation of recrystallization process is modified to study the LASER annealing. The observed microstructure and the simulated results are compared to determine the further development of the developed automaton.
-
Development of Analysis of Loss Sources of Vehicles
733-737Views:167Vehicle fuel consumption can be significantly influenced by various types of losses such as loss from bearing, aerodynamic drag and rolling drag. It is important to highlight that fuel consumption reduction can be only achieved when those losses are reduced that are induced during the operation.
The aim of our work group is to define the calculation method and the magnitude of the losses of the vehicles. These parameters are intended to be serve as input parameters for future energetic modelling of vehicles.
-
Sport Consumption, Fan Engagement, Sport Statistics – Post-specific Passing Characteristics in Football
Views:629Digitalization and the explosive development of technology have led to significant changes in football. Due to the increasing amount of data available through various sensors and other data collections, we can observe the rise of data-centric, analytical and statistically oriented thinking in football, which is also of interest to fans. Digitalisation is also closely linked to sports consumption, which is why we have seen significant changes in this area in recent years. The pandemic has further amplified the speed of digital transformation in the sports industry. One of the most important contents for sports organizations and their fans is the in-depth sports statistics and analysis that enhances the consumer experience. In our study, we examined the most common performance indicator in football, passing. Our goal was to examine the position-specific pass characteristics in detail, therefore we also examined different pass properties in our research. As a model for our analysis, I chose the premier league, which has the highest UEFA coefficient. The three rounds (rounds 30-32) of the championship season 2019/2020 have been recorded and analyzed in terms of passes. there was a significant difference between the average number of passes per game between defensive and offensive players (t=7,988, p<0.05). There is also a gradual decrease in the number of passes attempted per match and the accuracy of the pass in the examination of the middle positions when examining the positions in the depth of the pitch. For both pass accuracy and average pass count, the decreasing ranking corresponds to the position of positions on the pitch (order: 1, central defender 2, defensive midfielder 3, inside midfielder 4, attacking midfielder 5, striker). In the value indicator of the position for passes, offensive positions performed more effectively than defensive positions. The extreme positions also stand out among the attacking positions, where in the case of the position value per pass number, 23.3% of the total test was completed and 14% of the amount of the established position value indicators was provided by these posts. Overall, our study points to post-specific pass characteristics and, knowing this, we can state that the comparison of players' passing performance is relevant if the players are in the same or related positions.
-
A Case Study on Human Resource Management Practice of a Sport Organization
410-425Views:638Human resource with the adequate ability and skills is of decisive importance in all organizations, irrespective of the field of activity in which they operate. It is no different with the life of sports organizations. The human resource management of sports organizations is peculiar which is influenced by, on the one hand, the operating form of an organization, on the other hand, the nature of employment. Those well-known jobs can be also found in the sport organizations which are necessary to operate an organization and carry out the general tasks, at the same time, the amateur or professional athletes turn up as specific human resources. Aim of the study is to explore the specific characteristics of the human resource management of a particular organization, namely Debreceni Egyetem Atlétikai Club Sport Nonprofit Közhasznú Kft. (University of Debrecen Athletic Sport Non-profit Public Benefit Purpose Ltd., hereinafter: DEAC Ltd.), primarily focusing on the traditional HR functions. After reviewing the domestic and international specialized literatures, the practice of the examined sport organization will be described by means of case study, document analysis and managerial interview methods. Based on the results, it can be determined that there is no separate HR manager in case of the examined sport organization, due to its size, but the managing director carries out the tasks as an economic and HR manager in one person. From the aspect of organizational operation, the practice of HR functions is similar to the practice of other SME business organizations, at the same time, the management of athletics as human resources means its specific characteristic where the managements of labour supply, career and talent has other interpretation.
-
Environmental Challenges – Strategic Responses
26-39Views:208The paper serves the purpose of understanding better how businesses and enterprises may handle the changes happening in their environment using the tools of management. Radical changes are happening in the environment of businesses, primarily as a result of the massive and forceful appearance of new opportunities and constraints brought by the technological development. Some of the businesses participates actively in the creation of changes. For other businesses the main issue is the way they may handle the changes. How may businesses and enterprises adapt to the new environmental characteristic is the main issue under scrutiny in this paper.
-
Digital Twin and Shadow in Smart Pork Fetteners
515-520Views:283This paper introduces our ongoing research in the field of smart livestock farming. The base idea in this research is to take some industry based concepts, and adapt them into agriculture. In Industry we live the fourth industrial revolution, which is not a technical, but an organization revolution. So in this concept there are two key ideas, which are digital twin, and digital shadow. This article is about creating digital twin and digital shadow of a modern pig fattener. These models are based on the literature, and are identified on the data shared in these. However, these models can’t be used on real systems before identifying them on the actual circumstances. At this stage of research only digital twin of the product was created, and only some aspects of it. This however can simulate an average porkers feed consumption, weight growth and calculate the weight on certain stages of breeding. Further development is ongoing and our target is to make a fully functional model of a pig fattener.
-
Testing Methods of Green Supply Chain, in Particular Supplier’s Selection an Evaluation Tools
240-254Views:375Today, more and more articles have emerged in the field of sustainability and sustainable development. Sustainability plays an important role in supply chain management too. Green Supply Chain Management (GSCM) has emerged as a key approach for enterprises seeking to make their businesses environmentally sustainable. The notion of GSCM implies the insertion of environmental criteria within the decision-making context of the traditional supply chain management. Enterprises are increasingly expected to extend their sustainability efforts beyond their own operations to their suppliers and customers to their sustainability expectations. Literature of green supplier evaluation and selection methods number is large, though the number of environmental factors are relatively limited. Recently in supply chain management decision making, approaches for evaluating green supplier performance have used both qualitative and quantitative environmental data. Given this evolving research area, the purpose of this article is to analyse research conducted in international scientific journals focusing on the selection and evaluation of a green supplier. The purpose of this article will answered two questions: Which selection methods are commonly used? What environmental and other selection criteria for green supplier management are popular?
-
Comparative Analysis of Motivation Theories
1-13Views:1120The aim of the article is to compare motivation theories from the view of general psychology and work psychology. The research was done by using secondary sources and by analyzing motivation from both views. The difference between the two lines lies in outcome orientation. Psychology is more descriptive work psychology tends to focus on the results of the motivation process. In comparison, both have their values. The relevance of the research is to provide a theoretical basis for improving the development of more relevant motivation theories.
-
Application of Nanomaterials in Food Industry and Agriculture
116-126Views:128Nanomaterials have unique application features which can mainly be associated with their size properties. These materials have much higher surface than the normal particle size variant of the same materials. Due to these properties, nanomaterials are widely used in the industry. Food industry and the agrarian sector are using these materials increasingly. The main goal of nano size components and additives are the improvement of some parameters of the food manufacturing process, the elongation of the best before date of the food and the improvement of the texture, stability and the consistence of the food. Probably, nanomaterials will play an important role in the development of the food industry, moreover, it can be anticipated that nanotechnology will also appear there and will influence the whole food chain. It should be noted that food industry is using several nano size class materials which are not referred to as nanomaterials. Some examples are the micelles of some proteins, like milk protein, and fatty acids. Considering all these, the aim of our work was to present a thorough review and summary of the current applications.