Search
Search Results
-
Experimental Study on the Effect of the Geometry of Punching Tool on Clinch Joints
154-158Views:114In this study the effect of the punching tool’s geometry on aluminum alloy clinch joints is analyzed by experiments. Based on FE simulations the tip radius and the cone angle of the punching tool is changed, and their effect was analyzed by microscopic investigations and single lap tensile-shear tests.
-
Outlook of Precision Farming in Hungary
133-147Views:1165For agriculture, precision farming means the future by increasing incomes and reducing environmental loads at the same time Precision management produces a surplus in yield, revenue, result, but not immediately. The additional income potential is expected to increase by 20% to 50%. Farms mostly introduce precision farming in order to relieve workers. However, many farmers are afraid of the use of new technologies, but the use of information technology in agriculture will be unavoidable. Technology is fundamentally expensive, not even widespread, and farmers use only a few technology elements. Moreover, following the precautionary principle technology used in farming covers only a part of their agricultural land. So farms need to learn to produce more precisely than before in a knowledge-based manner.
-
Investigating the Effects of Active Cooling in 3D Printing
39-47Views:1313D printing is an increasingly widespread manufacturing process. With the development of machines and materials, the technology is becoming more accessible and easier to use. However, the technology's specificities mean that it requires knowledge of manufacturing technology. In some cases, it is necessary to solidify the freshly deposited layers as soon as possible in the event of large overhangs. This can be achieved by active cooling, which in turn can affect the material properties of the part. This research investigates the effects of active cooling during production.
-
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
310-324Views:318The crankshaft of today’s internal combustion engines with high performance output are exposed to harmful torsional oscillations originated from the unbalanced gas and inertial forces. To avoid the fatigue damage of engine components, caused by the undesired vibrations, torsional vibration dampers can be applied. Viscodampers are one type of the torsional vibration dampers, which operational fluid is silicone oil. For cost-effective R&D activities and production, finite element and finite volume numerical discretization methods based calculation techniques must be involved into the engineering work supported by the modern computer technology. The aim of this paper is to provide an insight into the multidisciplinary design and development process of visco-dampers in vehicle industry applications. Four different examples as structural, fatigue, CFD analyses and structural optimization have been introduced in the present work. It turned out from the static structural and fatigue analyses, that the investigated damper has safety factor over the limit for both static structural and fatigue analyses, so it is suitable for the given load conditions. In the structural optimization process 34.36% mass reduction has been achieved. According to the coupled fluid dynamic and heat transfer simulations a rather stagnating air zone evolved between the engine and the damper during the operation, which can cause efficiency reduction of cooling fins mounted onto the housing. In light of the numerical results, the suitable damper position has been determined for the highest heat transfer.
-
Design an Opening Force Measuring Device for Balancing Clips
220-225Views:118This paper deals with the development of a force measuring device to determine the opening force of different types of balancing clips. These elements can be used in the impellers of ventilators to rebalance the rotor. The measuring device contains a commercially available beam type load cell. The data processing is performed by Arduino Nano development platform with a 24-bit sigma delta A/D converter. The device is well applicable to determine the opening force of the clips in different opening distances.
-
Using the Photostress Method to Determine the Residual Stresses
24-38Views:152Strains and stresses in loaded and photoelastically coated structural members can be determined using the PhotoStress method. The quantitative values of variations in the principal strains (stresses) and their directions could be employed to get the strain or stress components field on the entire coated surface. In the PhotoStress experiment, isochromatic fringes give qualitative and quantitative information. It provides a source of information on the directions and magnitudes of principal strain and principal normal stress on the surface of photoelastic coated parts. This article reviews the principle of using PhotoStress analysis to measure the residual stress and provides the boundary condition of using this method.
-
Examination of Infrared Tomato Drying
303-309Views:88Tomato is a highly perishable food, thus preservation is required to meet the continuous market demand compared to the unbalanced yearly production peak. The aim of this paper is to show a detailed insight into infraradiation based drying process. Furthermore, to widen the possible usage range of a well-known approximation method for describing the temporal moisture variation in function of process parameters. The mass decrease of tomato slices was examined, in function of specific radiation power, heat source and sample distance, in forced and natural airflow. Based on the results dimensionless moisture ratio change over time was fitted as an exponential function, which may be used in industrial drying process optimization.
-
Physical Internet – a Novel Application Area for Industry 4.0
152-161Views:179The Physical Internet (PI or π) is one of the most decisive ideas for future logistics systems. The idea behind it is to implement logistic systems which apply the principles of Internet information flow. Simultaneously technological innovations of Industry 4.0 have also appeared. Our current research deals with the applicability of the tools of Industry 4.0 technology in the PI system. Following the literature review we analyse the individual technological tools that could improve the functioning of PI components. Subsequently we will detail the usability of a specific Industry 4.0 tool and finally determine the future research steps.
-
Wearable technology usage among students of the University of Debrecen
33-47Views:130The lack of physical activity and the growing prevalence of a sedentary lifestyle are urgent public health problem worldwide. The problem is also typical of the young population, especially university students, who spend most of the day in a sitting position. Technological development is one of the catalysts for the rise of a sedentary lifestyle, nevertheless, thanks to this, many devices have appeared on the market that can be used to encourage physical activity. The widespread of wearable activity tracker devices – wristwatches, wristbands – among the population shows a constantly increasing trend, with a parallel increase in the amount of data collected about ourselves (step count, calories burned, heart rate). The main goal of the present study derives from the recognition of the gap in this field in the domestic sports science literature therefore our focus is on modern information technology tools in the dimension of physical activity. The aim of this study is to assess the attitudes of the university student population towards activity-tracking devices. We conducted a cross-sectional online quantitative survey (questionnaire) among DE GTK students. 340 people filled out the questionnaire correctly. In addition to descriptive statistics, parametric and non-parametric tests (Pearson's chi-square test, Fisher's exact test, t-test, Mann-Whitney test) were used to examine the relationships. The results of the statistical tests were considered significant if p<0.05. We performed the distribution of the variables using the Kolgomorov-Smirnov test. The majority of respondents (55%) have already tried some kind of wearable device that measures physical activity. Every third student (34%) are currently using their device. Those who have not tried these devices so far indicated the price as the primary deterrent. 32% of the students plan to invest in such a device in the future. 39% of device users use an activity tracker bracelet, while 61% use or used a smartwatch. In terms of sex, we did not find any differences in asset ownership. The primary goal of the students (66.8%) was to track their physical activity. The most frequently used function was tracking the number of steps, indicated by 81% of the respondents, followed by heart rate measurement (67%). Most of them (69%) set some kind of goal regarding their number of steps. According to every third student, they moved more as a result of the device and managed to maintain the increased level of physical activity. 44% of the students claimed that their physical activity did not change despite using the device. Students tend to disagree with the positive statements related to the devices in connection with a healthy lifestyle. Although the present study suggests that wearable devices have an impact on students and they track their measured data, it is questionable whether the devices themselves are enough of an incentive for students to develop a healthier lifestyle.
-
Effects of TIG Reheating on Duplex Stainless Steel Weld Microstructure
295-302Views:141Duplex stainless steels (DSS) gaining their excellent mechanical properties and corrosion resistance due to their austenitic-ferritic microstructure, ideally in the same amount. However, to keep this ideal phase ratio during arc welding is very difficult. Generally, the arc welding processes will result in more ferritic microstructure in the weld metal and in the heat affected zone, due to the rapid cooling. The ferritic microstructure can cause chromiumnitride precipitation, because the nitrogen solubility in ferrite phase is very low below 700 °C. These chromiumnitride precipitations can cause loss of corrosion resistance and mechanical properties. However, during subsequent reheating, the chromium-nitrides can dissolve and act as a secondary austenite nucleation site in the ferritic microstructure. In our research we welded DSS specimen autogenously, with tungsten inert gas welding using pure argon and 94 % argon + 6 % nitrogen as shielding gasses. In the first case the sub-sequent solid-state reheating caused 20 % increase in the austenite fraction of the weld metal but with the use of mixed shielding gas only 5 % increase.
-
Increasing the Life of Mulching Tools
414-421Views:125Areas after mining or calamity are not amenable to immediate afforestation and require some adjustment. After removal of wood biomass, the rest of the residue is scattered throughout the area. To modify them, Several methods can be used to remove it. The optimal conditions for the planting environment and the subsequent adaptation process of the planting can be achieved by its mechanical, biological, chemical treatment. The basic prerequisite for a successful renewal of forests is their release from undesirable increases, in some cases from foams (trees) from mining waste. The area is also released when forest nurseries, seed plantations, etc. are established. The main purpose of the release of surfaces is to achieve the maximum throughput of the area for the machines to be moved. They wear during work. Wearing is a permanently undesirable change in the surface due to the interaction of functional surfaces or functional surface and wear medium. A tool that does not have any editing can go into a state where it can no longer be used anymore. An experiment was carried out in which 9 new teeth were placed on the rotor of the crusher and their wear patterns were observed. The article shows the progress of tool wear over time.
-
Simulation modelling in the sizing of city logistics systems – a study for concentrated delivery points
1-11Views:109Nowadays, urban freight traffic is causing significant noise and air pollution, so it is in the focus of green logistics developments, both in technology and system organization. Based on experiences within city logistics, significant problems are caused by the so-called concentrated sets of delivery points, where there are several delivery points with heavy freight traffic in a relatively small area. Since the summer of 2015, we collected lots of data about stores of these delivery points to support the modelling and the simulation of the new green solutions for the examined city logistics systems. Based on our results we can say, there are significant savings in these systems, so it is worth to deal with developing new, gateway-concept-based and consolidation-based solutions.
-
Compliant Mechanisms in Progress and Development Of Modern Technology
186-189Views:104In this paper, the compliant mechanisms will be presented. There will be presented some representative works that have brought progress and development in modern technology. Examples will be presented from simple concepts such as a tweezers, staples, to mechanical clutches, pointer and micro-compliant mechanical structures.
-
Surface Activation of High Impact Polystyrene Substrate Using Dynamic Atmospheric Pressure Plasma
80-87Views:136Over the last decade, the number of researches has increased in the field of bonding technologies. Researchers attempt to improve surface adhesion properties by surface treatments. Adhesive bonding is one of these bonding techniques, where it is important to see what surfaces will be bonded. One such surface property is wetting, which can be improved by several types of surface treatment. In recent years, atmospheric pressure plasmas have appeared, with which research is ongoing on surface treatments. In our research, we will deal with the effects of plasma surface treatment at atmospheric pressure and its measurement. In addition, we summarize the theoretical background of adhesion, surface tension and surface treatment with atmospheric pressure plasma. Our goal is to improve adhesion properties and thus the adhesion quality.
-
Interchange of Heat in Saw Disc Body During Cutting
488-494Views:112The paper presents the experimental results of a research aimed at the distribution of the temperature on the circular saw blade body. The temperature was measured at two distances from the centre of the circular saw blade body (70 mm, 140 mm) by means of an infrared thermometer. Two circular saw blades with the diameter of 350 mm and a variable adjustment of the body (with slots and without the coating, with both slots and coating) were used for the longitudinal sawing of the spruce wood (Picea excelsa) with the thickness of h = 37 mm. Feed speeds ware vf1 = 14 mpm, vf2 = 17 mpm and vf3 = 20 mpm. Cutting revolutions n = 4100 /min. were constant. The measured temperature was in the range from 21 °C till 27 °C. The highest measured temperatures were recorded on the circular saw blade with the slots and coating.
-
Augmented Reality
1-9Views:249This paper is an overview of augmented reality’s basic concepts and its connection to the logistics field. The paper includes a brief history of the tech and how it differs to the virtual reality. The main goal is to understand how augmented reality is being used in logistics to innovate and enhance services. It refers to how courier and freight companies are taking advantage of this technology to upgrade the warehouses, transportation and enhance value added services. It also analyses how the retail market is modernizing its stores and is using mobile applications for online shopping. Using augmented reality has overall pros and cons and even though is a technology on its early stages it shows a great potential to revolutionize the supply chain in its totality.
-
Investigation of application and development of precision irrigation technology
239-248Views:226Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
-
Improving of Geometric Precision in the Manufacture of Circular Holes Using Technology WEDM
238-245Views:198WEDM technology is among the final technology. It is characterized by the high quality of the machined surface. Therefore, a small geometric deviation from the desired shape, position, orientation or run out may have a significant impact on the functionality of the finished component. Its range is largely influenced by the accuracy of the applied electroerosion device, the precision of the workpiece and tool setting, the machining method, but also the combination of each other and the adjustment of all process parameters. They result in the final quality of the machined surface not only in terms of roughness parameters but also in terms of geometric precision of the machined surface. The aim of the paper was to describe the possibilities of improving the geometrical accuracy of WEDM with thin brass electrodes. At the same time, it contributes to an existing database of knowledge that defines the influence of selected aspects on the geometrical accuracy of the machined area in the production of circular openings.
-
Analysis of Vibration During Turning Process of Different Materials
200-205Views:116In this article, we would like to introduce the problems caused by vibrations in case of polymer turning processes. Nowadays there is a lot of research in this topic, to avoid the unnecessary phenomena of vibrations. The two most common methods are the Spindle Speed Variation (SSV), and the Vibration Assisted Machining (VAM). In case of SSV, the CNC machine can increase and decrease the speed of spindle continuously during turning which can significantly reduce the effects of chatter. This method is beneficial for longer workpieces when there is not any support except the chuck. Vibration-assisted machining can be used to minimise the problems caused by vibrations. VAM combines precision machining with small-amplitude tool vibration to improve the fabrication process. It has been applied to some processes ranging from turning, drilling to grinding. Based on the enumerated above we made some trial measurements about the basic vibrations of the turning tool shank. The tests were done on an NCT EUROturn-12B CNC machine which can found in the workshop of our institute. The tested material was Polyamide 6 because this is the most commonly used polymer in the industry. In the future, we would like to test some other basic and composite polymer materials too. The equipment was served by a specialist from SPM Budapest Kft. With these tests, our goal was to make sure that the equipment and the measuring setup are suitable for our future research.
-
The Situation of Digitization in the Hungarian Food Processing Industry
196-209Views:355Thanks to various technologies, such as nanotechnology, the next decades will completely transform the individual production processes and sectors. With the rapid advancement of information technology, the digitalization and automation of industrial processes pose new challenges for food business operators. Hungarian food companies will be able to keep up with their competitors and be the winners for the next decades if they can successfully adopt these technologies. However, this requires a strong focus on digitization, digital strategy, and directing investment, technology change and R&D activities in this direction. Digitization is one of the decisive directions of the future, which is why I felt it essential to study the level of digitization of Hungarian food companies, IT infrastructure and Internet usage, the use, and role of enterprise management systems, decision support and business analysis tools, and business readiness, Industry 4.0 technology change. Based on the 205 evaluable responses to the questionnaire, it can be said that only a tiny proportion of Hungarian food companies have a digital strategy and only a few have digital transformation.
-
Influence of MTP on Surface Roughness and Geometric Accuracy of Machined Surface at WEDM
91-97Views:108Electrical discharge machining technology is one of the most precise machining methods. Therefore, even the smallest deviation of micro and macro geometry generally has a significant impact on the overall quality of products produced by this progressive technology. The quality of the machined surface after Wire Electrical Discharge Machining (WEDM) is influenced by a large number of factors, most of which are influenced by the Main Technological Parameters (MTP). The aim of the paper was to describe the results of experimental research aimed at assessing the impact of MTP for WEDM on the quality of machined surface in terms of geometric accuracy and roughness parameters Ra and Rz. The samples were made of high alloyed ledeburitic chromium-molybdenum-vanadium steel designated EN X155CrVMo12-1 on a Sodick AQ535 electroerosion machine. The tool used was a standard compact brass wire 0.25 mm with the designation Elecut Brass CuZn37.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:129The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Comparison of the information content of the notes on the accounts between information technology services and sports activities
689-700Views:183Annual accounting statements are an important source of information within business relations amongst companies. However, it should be noted that due to their aggregate nature, the necessary information and through that the necessary knowledge can only be obtained from the two fundamental parts of the annual statements (balance sheet and profit and loss account) if the notes on the account contains the information that contributes to the more comprehensive interpretation of the other part of the annual statement. Beyond that, the notes to the financial statement have to help the presentation of a reliable and realistic overall image. In the notes to the financial statement, depth and detail of the disclosed information are not specifically stated, therefore their professional evaluation is left to the given enterprise. My basic purpose is to illustrate a comparison of the information content of the notes on the accounts between information technology services and sports activities. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act.
-
A Literature Review: Artificial Intelligence Impact on the Recruitment Process
108-119Views:10839This paper aim is to review the implementation of artificial intelligence (AI) in the Human Resources Management (HRM) recruitment processes. A systematic review was adopted in which academic papers, magazine articles as well as high rated websites with related fields were checked. The findings of this study should contribute to the general understanding of the impact of AI on the HRM recruitment process. It was impossible to track and cover all topics related to the subject. However, the research methodology used seems to be reasonable and acceptable as it covers a good number of articles which are related to the core subject area. The results and findings were almost clear that using AI is advantages in the area of recruitment as technology can serve best in this area. Moreover, time, efforts, and boring daily tasks are transformed to be computerized which makes a good space for humans to focus on more important subjects related to boosting performance and development. Acquiring automation and cognitive insights as well as cognitive engagement in the recruitment process would make it possible for systems to work similarly to the human brain in terms of data analysis and the ability to build an effective systematic engagement to process the data in an unbiased, efficient and fast way.
-
Digital Twin and Shadow in Smart Pork Fetteners
515-520Views:274This paper introduces our ongoing research in the field of smart livestock farming. The base idea in this research is to take some industry based concepts, and adapt them into agriculture. In Industry we live the fourth industrial revolution, which is not a technical, but an organization revolution. So in this concept there are two key ideas, which are digital twin, and digital shadow. This article is about creating digital twin and digital shadow of a modern pig fattener. These models are based on the literature, and are identified on the data shared in these. However, these models can’t be used on real systems before identifying them on the actual circumstances. At this stage of research only digital twin of the product was created, and only some aspects of it. This however can simulate an average porkers feed consumption, weight growth and calculate the weight on certain stages of breeding. Further development is ongoing and our target is to make a fully functional model of a pig fattener.
