Search
Search Results
-
Examination of the Effect of Cropyear on the Yield Potential and Yield Stability of Winter Wheat Varieties
62-67Views:158Variety selection is one of the most important, determinative elements of sustainable winter wheat production. Yield potential, and yield stability are the most important elements in the variety selection of winter wheat, but baking quality parameters play an important role, too.
Several winter wheat varieties were tested for yield and yield stability on chernozem soil in the Hajdúság (in the eastern part of Hungary), in the 2001-2002-2003-2004 cropyears. The management factors were the same for all cropyears. 15 varieties in early the maturity group, 14 varieties in the middle maturity group and 4 varieties in the late maturity group were tested in the above mentioned cropyears. The climatic conditions were average in 2001, dry in 2002, extremely dry in 2003, and very favourable in 2004.
We obtained 5298-6183 kgha-1 yield from early maturity varieties, 5683-6495 kgha-1 from middle, 5694-6031 kgha-1 from late ones in the average of four years. The cropyears had strong influence on the yields, even on chernozem soil, and were characterized by excellent water – and nutrient – husbandry. Averaging of cropyears and genotypes, we obtained 6984 kgha-1 in 2001 (average cropyear), 5452 kgha-1 in 2002 (dry cropyear), 3120 kgha-1 in 2003 (extremely dry cropyear) and 8400 kgha-1 in 2004 (optimum cropyear), respectively. The yield differences between the minimum and maximum yields were 885 kgha-1 in early varieties, 812 kgha-1 in middle and 337 kgha-1 in late maturity varieties, respectively. The varieties characterized by high yield potential and the varieties characterized by good yield stability were different, so in variety selection we have to take both genetic traits into consideration. There were positive, significant correlations among the yields of winter wheat varieties (early, middle, late), the temperature of spring months. (March-April), and the rainfall of spring months (March-April) (R2=0,703**-0,768** and R2=0,681**-0,749**, respectively). We found a high negative correlation between the temperature of early summer months (May-June) and the yields of wheat varieties (R2= -0,856**- -0,918**).
According to the results of our experiment, it is very important to harmonize yield potential and yield stability in the variety selection of winter wheat. -
The effect of plant density to the yield results and the yield components of maize hybrids
89-93Views:152Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way. -
The Influence of Cropyear on the Yield and Yield Safety of Different Sunflower Hybrids
68-73Views:210The effectiveness of plant production is basically influenced by the ecological, biological and agricultural technical factors. There are many kinds of sunflower hybrids which differres in their adaptability. If we want to increase the efficiency of sunflower production, we have to design different technologies for each hybrid. In the last decade, the range of sunflower hybrids increased exceedingly. This is the reason why we have to do experiments with them and examine what the relationship among genotypes, the environment and the hybrids is.
We made our experiments at the Látóképi Experimental Station of the University of Debrecen. We had 57 hybrids in 2001, and 44 in 2002 and 2003. We used only just those hybrids which were planted in every year.
In 2001 the months at summer were hot and the distribution of rainfall was extreme. In the beginning of the year 2002, the summer was also hot. During the abscessing period, the temperature was under the 30 years average and the rainless period was typical. In 2003, the temperature was extrame and the rainfall during the growing season was dry. The yield average which was determined after the three years in the very early group averaged 3998,9 kg/ha. The best hybrids were the LG 5385 (4273,3 kg/ha) and the Magóg (4134,4 kg/ha). The early group’s average was 4129,4 kg/ha. The best hybrid was the Astor in the early group. The middle group’s average was 4169 kg/ha and the Zoltán had a better yield than average (4238 kg/ha). In the confectionary group the Iregi szürke csíkos (3579,9 kg/ha) reached the best yield and it is above the average to it’s group (3225 kg/ha).
To estimate the results, we used factor analysis. Its results allow us to say that rainfall first and second part of June has a negative influence on yield. Aswith to the yield, yield safety is also important to know, which shows the adaptability of the hybrid.
After examining the CV% in the three years we can say that the most stable hybrids were in the very early group Samanta (10,94 CV%) and the LG 5385 (12 CV%) In the early group, the most reliable hybrids were Altesse RM (6,9 CV%) and the Astor (10,8 CV%) and the end in the middle group the Lympil (10 CV%) and in the confectionary group the Birdy (9,8 CV%) and IS 8004 (12 CV%) were the best.
After examining yield and yield safety, our conclusions are that in the Hajdúsági löszhát, the very early group LG 5385, early group Altesse RM, middle group Lympil and the parandial group IS 8004 hybrid had the highest yield and the best yield stability. -
Examination of the impact of sowing technology models on the ear, constiuent and yield parameters of the yield formation elements of maize hybrids of different genotypes
17-23Views:158Production year 2012 has been characterised by climatic extremities. The weather of this year can be considered very contradictory in terms of maize production. The droughty conditions of the winter and spring months had a negative effect on both germination and starting vigour. The favourable weather of May-July created ideal conditions for intensive growth and generative processes; however the lack of precipitation in August and September had a damaging effect on the development of yield composing elements and grain saturation processes as well. Under such circumstances, the sowing date models caused significant differences in the yield and quality of the hybrids belonging to different growth periods. The growing period of the maize hybrids has been shortened as a result of the unfavourable climatic conditions.
Based on the trial results, it is verifiable that short growing period hybrids can be securely sown in draughty years even with a later sowing date, however using a later sowing date in the case of longer growth period hybrids may result even in a yield loss of 2–3 t ha-1. In the case of early and average sowing dates, with given yearly conditions the hybrids of the observed FAO 370-390 hybrid group provided the best result (12.40 t ha-1, 10.99 t ha-1), while in the case of the third, late sowing date the yield dominance of the FAO 290-350 hybrid group is the most significant (10.08 t ha-1).
The analysis of the yield composing elements found that the P9578 hybrid has the highest shelling ratio, while its cob is the shortest. The P9494 hybrid has a high yield and the highest thousand grain weight, while the DKC 4983 has the longest cob and its thousand grain weight is above 300 g.
The results confirm the fact that DKC 4590 has the highest yield potential and starch content, while in terms of oil and protein content the Szegedi 386 and NK Octet hybrids are the most important.
-
Biostimulant induce growth, chlorophyll content and fresh herbage yield of alfalfa (Medicago sativa L.) and variegated alfalfa (Medicago × varia Martyn) plant
19-25Views:120The use of biostimulants is associated with promoting plant growth by stimulating cell division and improving nutrient availability and uptake. A study was conducted at the University of Debrecen, Hungary, to examine the effect of biostimulants on alfalfa growth, chlorophyll content and fresh herbage yield. The experiment was arranged in a randomised complete block design with three biostimulant treatments plus control replicated three times. Data collected were subjected to analyses of variance using Genstat, where significantly different means were separated at a probability of 5% using the least significant difference. The findings show no different variation in plant height or chlorophyll content (SPAD) throughout the early stages of growth. Nonetheless, a notable impact was noted in the latter stages (28 days after biostimulant treatment application) on the growth of the alfalfa plant. Biostimulant treatments did not had effect on fresh yield for second through fourth cuts, but the fifth cut showed a significant effect, with T1 treatment recording the highest herbage yield of 19745 kg ha-1 followed by T2 (Tricho Immun plus Ino Green) and T3 (Tricho Immun), with yields of 19528 kg ha-1 and 17273 kg ha-1, respectively, while the T0 (control) recorded the lowest herbage yield of 12060 kg ha-1. However, the average mean yield indicated the application of biostimulants significantly increased fresh yield herbage by 20.5%. Correlation coefficient values suggested plant height at both 14 and 28 DAH (days after harvest) strongly correlated with fresh herbage yield (r = 0.7756 and 0.7455) which reflected in the increase in fresh herbage yield. Therefore, our results suggest that the use of biostimulants in alfalfa cultivation holds promise for improving growth and yield potential through their positive effects on chlorophyll content and the growth of alfalfa plant.
-
Studies on yield stability in autumn wheat species
61-66Views:101The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and varieties) suitable for the region and the site. The sowing structure adapted to the ecological background increases the yield and decreases the yield fluctuation caused natural effects. Exact long-term trials are essential to develop variety structure of winter wheat production suitable for the given ecological conditions. We have examined the productivity and yield stability of genetically different state registered winter wheat varieties. We have compared the varieties’ yield results in plot trials, at similar agrotechnical conditions, in different cropyears. We have examined the absolute and relative (compared to the mean of varieties) yield of winter wheat varieties. We have valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the connection between productivity and yield stability of varieties. We have pointed out the varieties with good productivity and yield stability in given agroecological conditions.
According to the results of our examinations the developing of variety structure suitable for the agroecological conditions could increase the potential and effective yield level of wheat production. -
The impacts of spring basal and side dressing on maize yield
83-86Views:207The yield potential of maize is very high. According to Tollenaar (1983), maize yield potential is as high as 25 t ha-1 (absolute dry yield) which is the highest among all cereals. In order to fully utilise this high yield potential, proper nutrient replenishment is of chief importance among all agrotechnical factors.
The aim of research was to examine the effect of nitrogen fertiliser applied as basal and side dressing on maize yield.
The measurements were performed at the Látókép experiment site (47° 33’ N, 21° 26’ E, 111 m asl) of the Centre for Agricultural Sciences of the University of Debrecen on mid-heavy calcareous chernozem soil with deep humus layer in an established experiment in 2011, 2012 and 2013. The trial design was split-split-plot with two replications.
Based on the experiment results, it can be established that the nutrient uptake of maize is greatly dependent on the amount of water store in the soil. From the aspect of the development of the maize plant and water supply, the most determinant factor was the distribution of precipitation over the growing season and not the amount precipitation. This is shown by the fact there was only 276 mm precipitation – which was favourably distributed – in 2012 to increase the availability of nutrients and the main average was the highest in this year (14.394 t ha-1).
Spring basal dressing helped maize development in all three years even on chernozem soil which is well supplied with nutrients. Although the effect of side dressing did not result in any yield increase, it could still contribute to mitigating the stress effects caused by environmental factors. Altogether, nutrient supply adapted to the various development stages of maize can favourably affect the success of maize production.
-
Effects of agrotechnical factors on the quality and quantity of yield in winter wheat production
69-75Views:193The present study was conducted to determine the effect of basic agrotechnical factors on the yield and quality of winter wheat. Two experiments were set in 2017/2018 growing season, where we studied the influence of different forecrops, fertilizing treatments and cultivars. 204 samples were measured with Single Kernel Characterization System and NIR grain analyser to determine protein (NIR-P), wet gluten (NIR-WG), Hardness Index (HI), kernel weight (KW) and kernel diameter (KD). Fertilizing had a significant effect on yield, KW, HI, NIR-P and NIR-WG, except KD. N90PK dosage was enough to realize yield potential for 6 out of 9 cultivars, but considering protein content N150PK dosage was needed. The forecrop had no significant influence on yield, KW, KD or HI, however sweet corn as previous crop had significant improving effect on NIR-P and NIR-WG compared to sunflower as forecrop. According to our data of correlation analysis, no negative relationship was found between yield and NIR-P, however HI was in medium positive correlation with NIR-P. The variety Vyckor had the highest yield, but in quality aspect, the highest NIR-P and NIR-WG values belonged to KG Kunhalom variety.
-
The significance of biological bases in maize production
61-65Views:184The comparative trial has been set up in the Demonstration Garden of the Institute of Crop Sciences of the University of Debrecen, Centre for Agricultural and Applied Economic Studies, Faculty of Agricultural and Food Sciences and Environmental Management in 2012, with 24 hybrids with different genetic characteristics and growing periods. The soil of the trial is lime-coated chernozem, with a humus layer of 50–70 cm.
The weather of the trial year was quite droughty; the monthly average temperature was 3–4 oC higher than the average of 30 years. High temperature, together with lack of precipitation occurred during the most sensitive phenophases of maize (flowering; fecundation, grain saturation).
The following characteristics have been observed: starting vigour, date of male and female flowering, plant and cob height, dry-down dynamics during maturation and the change of yield composing elements has also been quantified. The yield was recalculated to 14% moisture content grain yield after harvesting.
The beginning of the growing period was advantageous, therefore the analysed hybrids could grow a high (above 300 cm) and strong stem. The yield of the hybrids changed between 10.33 and 11.87 t ha-1, but as a result of the unfavourable climatic extremes, their genetic yield potential prevailed only at a rate of 30–40%. However, moisture content by the time of harvesting was good despite its early date (12th September); it remained under below 14% in most cases. Dry-down was measured on a weekly basis between 14th August and 5th September.
The analysis of the qualitative parameters of the maize hybrids (protein %, oil % and starch %) resulted in significant differences. The most significant difference has been observed in the case of protein content (LSD5%=2.01). Oil content was the most advantageous in the case of hybrids belonging to the mid-late growing group (FAO 400). The X9N655 and 36V74 hybrids had the highest oil content (around 4%), while hybrids P9915 and 37F73 had significantly lower oil content. Starch content was above 70% in the case of every hybrid.
Hybrid selection is highly important in terms of yield and yield security of maize, as well as the application of modern biological fundamentals and hybrid specific technology for the improvement of the level of cultivation technology.
-
Preparatory study for carbon sequestration modelling of agroforestry systems in Hungary: The assessment of the yield class distribution of windbreaks
73-78Views:89The escalating carbon dioxide emissions leading to global climate change are acknowledged as a paramount environmental challenge in the twenty-first century. The significance of land use systems in stabilising carbon dioxide levels and enhancing carbon sink potential has gained noteworthy attention from both the scientific and political communities. The Intergovernmental Panel on Climate Change emphasises that agroforestry systems present vital prospects for synergising climate change adaptation and mitigation efforts, offering substantial technical mitigation potential. Windbreaks are well-known agroforestry systems in Hungary and form an important part of agricultural landscapes. The improved agroforestry subsidy system in our country makes it relevant to model the carbon sequestration potential of windbreaks. In the framework of the ForestLab project we plan to develop a carbon sequestration model specific for Hungarian agroforestry systems. In this study, as a preparatory step of the model development, we assessed the yield class distribution of Hungarian windbreaks by tree species group and identified variables that had significant effect on yield class based on the data of the National Forestry Database. Our results show that among the examined effects the most important predictor of the yield class of windbreaks was the tree species group, followed by the thickness of the productive soil layer and the hydrology of the site.
-
Findings on the cultivation of potatoes in organic farming
113-116Views:104This paper explores the effectiveness of organic and plastic mulching for potato production in the Czech Republic. The mulching with chopped grass (GM) and black textile mulch (BTM) were compared to non-mulching control variant (C) with mechanical cultivation. Especially in plots with BTM were first formed ridges and covered by the black polypropylene non-woven textile and then they were planting. During vegetation the infestation of Colorado potato beetle (CPB), weeds biomass, course of soil temperature and soil water potential were assessed. The results showed that surface of GM had a positive effect on soil temperature reduction, soil water potential depression. This study also indicated a positive effect of GM on the larvae of CPB diminution, on the other hand higher incidence of larvae and higher defoliation was observed in BTM. GM had a significant effect on the yield of potatoes. The yield of ware potatoes was higher by 27 % higher on plots with GM and by 16 % lower on plots wit BTM in comparison with C. NeemAzal T/S decreased statistically significantly % of defoliation and increased yield of ware potatoes by 35 % in comparison with control.
-
Evaluation of the Green bean variety candidate BU-16
75-81Views:88This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Effect of different production types on the yield and ß-carotene content of sweet potato /cultivar Ásotthalmi- 12/
45-49Views:176Production of sweet potato is extending in Hungary, despite the fact that there is no field-specific production technology. Therefore, many growers cannot utilize potential yields and quality. The goal of this study was to determine the optimal production method of the Ásotthalmi 12, a Hungarian sweet potato cultivar which can adapt to the Hungarian climate. The effect of single and twin rows production on the yield of this cultivar was examined. The planting was carried out on June 24th, the harvesting on October 20th and the growing-season was 120 days long. Uniform nutrient supply was applied to the whole field experiment. During basic fertilization, 206 kg Knd 20 kg N, 36 kg P ha-1 were used on the soil. While forming the ridges, we used an additional 25 kg N, 45 kg P and 62.5 kg K ha-1. We adopted drip tape irrigation on the experimental field. After the planting, from the 8th week of the vegetation, another 21 kg ha-1 K, 10 kg ha-1 MgSO4, and 2 kg ha-1 Ca(NO3)2 was added in one dosage weekly, until the 13th week of vegetation. At the evaluation of the experiment, we examined the yield regarding the whole experimental plot. SPAD and fluorescence measurements were carried out on 08.16. 2019, 08.28.2019, and on 09.13.2019, during the watering break. To demonstrate the difference between the dates, we applied ANOVA and Tukey post-hoc tests. For the measurement of phytonutrients HPLC, a liquid chromatograph was used, where the carotenoid content of the Ásotthalmi 12 cultivar was determined in connection with the different production methods. Test results showed that twin rows production leads to a nearly 30% greater yield, than single row production. We determined, that the growth of yield correlates negatively to the ß-carotene content of the Ásotthalmi 12 cultivar sweet potato.
-
Effect of sufficient and deficit irrigation with different salt inputs on the yield of cucumber
19-25Views:119Soil salinisation is considered one of the major environmental hazards threatening agricultural productivity and can be accentuated by climate change as well as the use of low-quality water in irrigation. This is the case in our study area which is affected by secondary salinisation due to the use of saline irrigation water for horticultural production. Deficit irrigation technique is implemented especially in arid and semiarid regions due to its potential to optimise water productivity while maintaining or increasing crop yield. The main objective of this study was to compare the effect of irrigation with sufficient (SD) and deficit (DD) doses. This research was carried out in Karcag in 2020. Cucumber was grown on a meadow chernozem soil and was irrigated with SD and DD of two irrigation water qualities. Soil moisture was monitored and crop yields were recorded. Despite the differences in quality and quantity of water, the application of less water by DD maintained the same yield as SD. We found a non-significant difference between the average soil moisture contents under the treatments (15.5 v/v% for SD and 13.5 v/v% for DD). Deficit irrigation can be an efficient technique due to its potential for improving water use efficiency, maintaining sufficient soil moisture content favourable for proper crop development and yield.
-
Stevia (Stevia rebaudiana B.) yield in the case of different production technologies
71-77Views:222Stevia rebaudiana B. offers a natural alternative of sweetening, potential health promotion plant, and our country shows increased interest about cultivation in Hungary in addition to the neighboring European countries. The agricultural production system installation necessary
understanding of the needs of the plant, as well as exploring the agronomic potential. Field experiments were conducted in 2015 with the aim to highlight some of the technological production parameters and correlations between them. We have reviewed the most important agronomic factors, the spacing (50×50 cm and 33×33 cm), ground covering (agro-cloth covered and uncovered/ control), their vegetative growth (first-,second-order branch), herb yield and quality in effect.
Based on empirical evidence, that the Hungarian climates also have the opportunity of 3 cuttings during a growing season, besides of early planting, optimal climatic conditions (in October didn’t reduce the daily minimum temperature below 0 °C, after cuttings the maximum interval values remain below 40 °C), and adequate water supply and crop protection facility. The 33×33 cm spacing evaporates more than 50×50 cm spacing, because of the dense population, the continuous canopy less able to breathe, so there are serious chances to the pathogen colonization.
Based on the results of our research to the wider 50×50 cm spacing favorable appreciate the stevia optimal progress in terms of qualitative and quantitative parameters of the yield. The stevia yields produced in the Northern Great Plains field cultivation can produce similar results as stevia crop yields in warmer climates, where the primary crops. Our research experience suggest that there is a viable domestic stevia cultivation, developing the necessary technology is still growing further investigation justifies. -
What does precision crop production hold for the future of soil science and plant nutrition?
411-421Views:230The concept of precision agriculture is straightforward at the scientific level but even basic goals are blurred at the level of everyday practice in the Hungarian crop production despite the fact that several elements of the new technology have already been applied. The industrial and the service sectors offer many products and services to the farmers but crop producers do not get enough support to choose between different alternatives. Agricultural higher education must deliver this support directly to the farmers and via the released young graduates. The price of agricultural land must be higher if well-organized data underpin the production potential of the fields. Accumulated database is a form of capital. It must be owned by the farmers but in a data-driven economy its sharing will generate value for both farmers and the society as a whole.
We present a methodological approach in which simple models were applied to predict yield by using only those yield data which spatially coincide with the soil data and the remaining yield data and the models were used to test different sampling and interpolation approaches commonly applied in precision agriculture. Three strategies for composite sample collection and three interpolation methods were compared. Multiple regression models were developed to predict yields. R2 values were used to select among the applied methods.
-
The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
203-210Views:214The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:193In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
Harvesting system established for the utilisation of Miscanthus sinensis ‘tatai’ “energy cane” in biomass power plants
143-150Views:163The increasing demand for energy worldwide and the resulting environmental impacts of fossil fuels forced many countries to turn to renewable energy resources as a clean and sustainable alternative. More than a third of Europe’s binding renewable energy source target of 20% by 2020 will come from solid biomass for electricity and heating according to the National Renewable Energy Action Plans submitted by member states of the European Union (EU) to the European Commission. To achieve this goal long-term yield studies in renewable energy plants are important to determine mean annual biomass and energy yield, and CO2 emission. Field experiments worldwide and also in Europe have demonstrated that Miscanthus, a fast-growing C4 rhizomatous grass can produce some of the highest biomass and energy yield per hectare of all potential energy plants. Miscanthus is a plant that originates from the southern slopes of the Himalayas. It was bred for the Hungarian climatic conditions in 2006 under the name of Miscanthus sinensis ‘Tatai’ (MsT). The species has high frost and drought tolerance and high energy value. This is why there is growing demand for the biomass (lignocellulose) produced by growing this plant. The biomass, produced from the high yield energy reed, can be transported to power plants in large quantities, in forms of bales. Its household consumption is not yet significant. This study presents the external features, characteristics, propagation and plantation process of MsT energy reed. The study also demonstrates the harvest technology of the species worked out between 2009–2012 in Tata, Hungary and the options of supplying to biomass
power stations.
-
Estimation of the vine-shoot yield in the Gyöngyös district
21-26Views:142Every year, a significant amount of vineyard prunings is generated in Hungary. Instead of utilization them, it is burned directly on the field in spite of the limitations of legalization highly pollute the environment in recent decades. The vineyard pruning itself or with other by-products from pomology and forestry can be significant amount of fuel source. However, before the planning to utilization the essential task is to estimate the potential. This study examine that how many vineyard is generated in the micro-region of Gyöngyös in every year on appointed vineyard.
In order to vine-branch potential calculate more accurate data was necessary so the products had to be determined for all plant. Thus, the biomass resource and the utilization become plannable. As the result of the experiment we can estimate that 1,5 t/ha vineyard pruning are generated. It means more than 9 thousand tons pruning in the micro-region of Gyöngyös. This amount can be convert into fuel source more than 150 thousand GJ heating value.
The results evince that the vineyard pruning is important fuel source in every year in the micro-region of Gyöngyös. Further usage is suggested for other regions in other size.
-
Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
131-136Views:221The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments. -
Determining elements of variety-specific maize production technology
157-161Views:86Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
is increasing and we have to strive for using the appropriate crop rotation.
The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
and the worst crop rotation was the monoculture.
There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
there are hybrids with wide and narrow optimum plant densities.
The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
years as compared to early hybrids.
We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
utilize the genetic yield potential. -
The effect of different sowing depth on the yield and yield-forming elements of maize
173-176Views:96On a global scale, maize is an important food, feed and industrial crop, with an increasing production area (Nagy, 2007 and 2021). Among the environmental impacts, extreme weathering factors caused by climate change are causing serious problems for crop stability, and maize is no exception.
Precision farming is today's most innovative agrotechnical approach, which can greatly increase crop safety and reduce costs by exploiting the genetic potential of our soils and the hybrids we use (Torres, 2012).
Sowing is one of the most important agrotechnical elements, and with good seeding we can ensure that we have all the requirements of a high yielding, high growing crop (Pepó, 2019). In the case of sowing, it is important to place the seed in moist soil to provide the optimum environmental conditions for the crop to ensure uniform emergence (Széles et al., 2020; Shrestha et al., 2018).
Precision planting is the market leading technology in precision planters in the United States, and when cooperating with them we looked for methods to optimise the depth of sowing and to monitor the effect on yield by studying the initial development of the plants. The seeder was equipped with the company's SmartFirmer soil scanner integrated into the seed drill. Automatic seed depth adjustment based on soil moisture is an exceptional solution for uniform emergence and drought protection.
-
Test Results of Winter Wheat Varieties in 2002/2003 in the Hajdusag
59-64Views:122We examined 35 early, 32 mid-season and 12 mid-late winter wheat varieties on calciferous chernozem soil after sunflower green crop in 2003. We set-up the experiment on small-size parcels, with 4 repetitions. In addition to the favourable agrotechnical conditions, with this year’s extreme ecological conditions the varieties resulted in weaker yields (2500-3200 kg/ha). Our findings have proven that there is a significant difference both between the maturity groups and between the yield potential of varieties with different genotypes, inside each group. Early varieties showed lower yield potentials according to the other two groups. The differences between the various variety’s yields was the smallest in the mid late group (893 kg/ha). Under given ecological and agrotechnical conditions, the following varieties showed the relatively best yields and best adaptability:
• early maturing varieties (3200-3700 kg/ha): Mv palotás, KG Magor, Mv Mambo, Mv Emese, GK Margit, GK Tündér, GK Csongrád, GK Attila, Mv Amanda, Ukrainka;
• mid season varieties (3300-3800 kg/ha): Győző, GK Marcal, Róna, GK Rába, Buzogány, MF Kazal, GK Mura, Hunor, GK Cipó, Mv Magvas, Mv Vilma, GK Zugoly, Jubilejnaja 50;
• mid-late varieties (3200-3600 kg/ha): Maximus, Complet, KG Kunhalom, GK Holló. -
Organic soybean production in Hungary
45-52Views:222Organic soy production, particularly for feedstuff in organic animal husbandry, is needed in Hungary and the EU regions. Soybean producing crop area in Hungary has increased in the last years, however, the agroecological potential would allow for a larger soybean production area. This study presents the soybean market in Hungary, and the role of soybeans in protein supply in food and feed, summarising the critical elements of organic soybean production from variety selection to marketing. During the field research, the effects of the agronomical environment on yield potential factors were examined. We aimed to determine how different row spacing and tillage systems affect organic soybean yields of different varieties, with particular attention to the dry region, and determine the specific methods and varieties of soybean that favour these areas. We found that the tillage (plough/grubber), the spacing (wide/narrow), and the variety effects were all significant on morphological variables. The most remarkable difference was seen in plant height and the number of pods per plant, while the number of nodes was also highly impacted by tillage treatment and variety. The nutrition variables were significantly different, mainly as an effect of tillage and spacing interaction with significantly different plant responses of varieties.