Search
Search Results
-
Evaluation of Soil Degradation Based on High Resolution Remote Sensing Data
145-148Views:77Soil salinity is the main problem of soil degradation in the Grate Plain with cultivated area of 20% affected. Its influence is accelerated on the water managed and irrigated lands. Remote sensing can significantly contribute to detecting temporal changes of salt-related surface features. We have chosen a farm where intensive crop cultivation takes place as a test site as soil degradation can be intensive as a result of land use and irrigation. In order to evaluate soil salt content and biomass analysis, we gathered detailed data from an 100x250 m area. We analyzed the salinity property of the samples. In our research we used a TETRACAM ADC multispectral camera to take high resolution images (0,2-0,5 m) of low altitude (300-500 m). A Normalized Vegetation Index was computed from near infrared (750-950 nm) and red (620-750 nm) bands. This data was compared with the samples of investigated area. Analyzing the images, we evaluated image reliability, and the connection between the bands and the soil properties (pH, salt content). A strong correlation observed between NDVI and soil salinity (EC) makes the multispectral images suitable for construction of salinity map. A further strong correlation was determined between NDVI and yield.
-
Heavy Metals in Agricultural Soils
85-89Views:69The soil constitutes the basis of the food chain. To keep soil conditions in a good trim is very important, it’s part of the sustainable development and of producing food supply harmless to health.
In some cases, soil productivity is the only important part, qualitative requirements or economical characteristics can improve it. The soil is threatened by two danger factors: the soil degradation and the soil pollution. The accumulation of different harmful and/or toxic substances in the soil is well known. Heavy metals constitute a part of it. Metals in the soil and in the soil-solution are balanced. This balance depends on the type of the metal, on the pH, on the cation-band capacity of the soil, on the redox relations and the concentration of cations in the soil.
To be able to handle the metal contamination of the soil, it is important to estimate the form, the possible extension and the concentration of metals.
Of course, the different types of soils have different physical-chemical, biological and buffer capacity, they can moderate or reinforce the harmful effects of heavy metals. To draw general conclusion of the dispersion and quantitative relations on the metals originated from different contamination sources is hard, because in some emissive sources contamination is limited in small areas but on a high level, some others usually expand on larger areas, and as a result of equal dispersion, the contamination’s level is lower.
Heavy metals – unlike alkali ions – strongly bond to organic materials, or infiltrate in a kelát form. Their outstanding characteristic is the tendency to create metal-complex forms. Kelats take part in the uptaking and transportation of heavy metals. Heavy metals exert their effects mostly as enzyme-activators.
The metals cannot degrade in an organic way, they accumulate in living organisms, and they can form toxic compounds through biochemical reactions.
Lot of the heavy metals accumulate on the boundaries of the abiotic systems (air/soil, water/sediment), when physical or chemical parameters change, and this influences their remobilization.
Human activity plays a great part in heavy metal mobilization, results in the human origin of most biochemical process of metals.
To understand the toxic influence of accumulated metals of high concentration, their transportation from soils to plants or their damage in human health, must clearly defined and investigated.
For effective protection against soil pollution, the types and levels of harmful pollution to soil must identified, regarding legal, technical and soil-science aspects, preferable in a single way. Difficulties in this area mean that toxicity depends on loading, uptake, soil characteristics and living organisms (species, age, condition etc.), furthermore, local and economic conditions considerably differ. -
The use of biogas in energetics
41-46Views:102In our study we examine the technical facilities of biogas production in the economic environment of a given region. The region can be considered as typical: it has animal farms, a poultry-processing plant with the characteristic problems of environment load and by-product handling. Biogas can be used for energetic purposes, and, in large scale, it can be sold as electric energy. The heat coming from the engine and the generator can be collected in heat exchangers and can be used for preparing hot water and for heating. One third of the gained energy is electric, two thirds are heat. The aim of the local owner and the economic management is to increase the rate of cost-effectiveness in general. We examined the tecnnical and economic conditions of establishing a biogas plant (using data of an existing pigfarm). We planned the biogas plant and calculated the expected investment and operational costs and return.
-
Complex evaluation of agrotechnical factors in rape seed
59-63Views:95A polifactorial field trial with rape was carried out in the crop-years of 2007/2008 and 2008/2009 at the Látókép Research Centre of University of Debrecen, 15 km away from Debrecen. The soil type of the research area was a calcaric chernozem, with a levelled and homogeneous surface. Our investigations on the dynamics of lodging proved that rape can easily be lodged under unfavourable weather conditions, which results in a significant crop failure: In crop-year 2009 yields were 1.0-1.5 t ha-1 higher than in 2008, when the weather conditions were more unfavourable. In both crop-years the influence of sowing time on the crop yield of rape was examined in three soil cultivation systems, with ploughing, loosening or disking. Different sowing time influenced the yield of rape in both crop-years significantly. In the crop-year of 2007/2008 – due to mild winter – we got the highest yield in the first sowing time (at the end of August) with loosening (3930 kg ha-1) and disking (3727 kg ha-1), while in case of ploughing we experienced the highest yield (3770 kg ha-1) in the second sowing time. There were no significant differences between the first and second sowing time (the end of August and the beginning of September), and in the third sowing time (end of September) also a moderate crop failure (-6.7%) cold be obtained, due to the favourable weather in winter and the water supply of the crop-year 2007/2008. In 2008/2009 all the three cultivation systems showed the best yield-results in the second sowing time (ploughing: 4886 kg ha-1, loosening: 5186 kg ha-1, disking: 5090 kg ha-1), and the first sowing time hardly differed from this (-4.1%), while the late September sowing time resulted in a significant crop failure of -11.1%.
-
Mathematical modelling of surface irrigation for field crops in Jordan based on soil hydrological-physical properties
137-148Views:87Jordan suffers from drought and depletion of water resources. In-field crop management, the issue of irrigation scheduling is important and influential. In this research note, a simple method was developed for scheduling surface irrigation of field crops based on inputs of crop ecology, effective root depth, soil texture, soil hydrology, and logical mathematics. It was concluded that the science of mathematics has succeeded to meet academic irrigation scheduling in terms of surface irrigation for field crops based on both soil hydrological and physical traits. Extension scholar has a decision to choose mathematical irrigation model depends on the traditional inputs or updating the model by searching for renewable inputs such as different varieties root depths, optimum row spacing of each crop, drip irrigation mathematical modelling, and digital sensing. In both cases, the input related to the effective root depth is a major and basic factor in mathematical irrigation scheduling. It is, therefore, recommendable that extension research-based systems should focus on basic mathematics to capacitate the complementary role of academics, research, and extension in irrigation modelling, and rural development.
-
The Usage of New Multispectral Satellites in Agro-Environmental Protection
282-289Views:95GIS, and especially remote sensing, offers great help in performing agro-environmental protection tasks. It can process a large amount of data to an arranged set of databases, and is also an excellent source of information. Moreover its keeps the geographical coordinates of all data during processing. The usage of remotely-sensed data is one of the most up-to-date and effective ways to observe, analyze and understand the complex phenomena taking place in all the spheres of agricultural production (soil, water, air), and also to track and monitor the changes of different environmental parameters, as they constantly change in time and space. Several indices will be described, which can be derived from remote sensed data. Next, a relatively new hyperspectral satellite sensor (MODIS) will be introduced, as it can be a input data source in research performed in agri-environmental protection. Last, a new meteorological satellite (MSG-1) will be introduced, as its data are available for public usage, and it could be an important data source.
-
Topology in the fruit plantation
253-257Views:167The localization of fruit trees, the topology of the branch structure and the spatial structure of the canopy are important to plan sitespecific agro-ecological and production technology projects in an orchard. The currently used instruments and technologies – in the precision agriculture – give opportunities to obtain these informations. The examinations were carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer. The collected spectral data were completed with the 3D point cloud by Leica ScanStation C10 laser scanner. The laser impulse data and the vegetation index values were integrated in a unified 3D system. The integration of the two special data collection system provides new opportunities in the development of precision production technology system. The results could be directly used in phytotechnology, water management, plant protection and harvesting in orchards. Our elaborated method can supply digital high spatial accuracy guidance data for development of the automated machines, which could provide some new developmental way in the immediate future.
-
Evaluation of automated anaerobic fermentation processes as in the case of mould infected maize
81-86Views:146In Hungary the renewable energy utilization is planned to achieve 13% by 2020. Biogas production is one of the fields with the largest energy potential. Achieving high efficiency during continuous production despite the mixed and variable composition of input materials is the most common problem which the newly built biogas plants using agricultural raw materials have to deal with. The first experimental reactors at the Department of Water and Environmental Management were built 12 years ago. Control and automation of the four separated bioreactors were executed with ADVANTECH GENIE 3.0 software which granted pre-programmed measurement and points of intervention for pH, temperature, CH4, CO2, H2S, and NH3. The system became out-of-data, therefore in 2010 it has been redesigned and tested. The system is controlled by Compair Proview SCADA (Supervisory Control and Data Acquisition) software running on Linux platforms. The Fusarium infection caused serious yield-losses in cereal production in 2010. In the case of cereal products, which non-utilizable as forage seems an optimal solution is utilizing as biogas raw material. The raw material was based on the Fusarium infected maize. In the recent publication infotechnological and technological experiences of the pilot test period are evaluated as well as direction of future development is defined.
-
Production of corn in Serbia in the light of climate change
305-322Views:191This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent research by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid.
-
Preliminary results of the combined production of duckweed Spirodela polyrhiza and common carp (Cyprinus carpio) in an aquaponic system
83-89Views:65As a result of population growth, increasin amount of food is needed, and agriculture is under an increasing burden to meet these needs. Traditional agriculture is often attacked due to its environmental impact. We must find alternative, environmentally friendly ways to produce more food. Aquaponics is a closed system in which we can produce both fish and plants at the same time. Duckweed species are small, aquatic, floating plants belonging to angiosperms. It can potentially be an alternative protein source, due to its high protein content, good amino acid supply, and rapid growth. Under suitable conditions, it doubles its weight in 2–4 days, and can reach a yield of 30 t ha-1 year-1in dry matter. It forms a carpet on top of the water and can be found in slow-moving or still waters. Since they are resistant to a wide range of nutrient concentrations, they are also suitable for cleaning wastewater (such as eutrophicated lakes, sewage reservoirs, liquid manure storage). Fish feed is the primary nutrient source for aquaponic systems, which usually contains fishmeal. If duckweed can be used as an alternative for fishmeal in the feed, it could improve the sustainability of the aquaponic and aquaculture systems. In this study, the aim was to develop an optimal harvesting protocol for duckweed Spirodela polyrhiza under aquaponic conditions. In a four weeks experiments, four harvesting protocols were set up, a control where only biomass measurements were made, a 25% group where 25% of the biomass at the time of measurement was harvested, and a 50% and a 75% group where at the time of measurement 50% and 75% of the biomass was harvested. Three replicates were used per treatment. We weighed the biomass every week and removed the amount corresponding to the group. Based on the preliminary results, it can be said that more biomass was obtained in the groups with the 25% harvesting protocol and the control group.
-
Analysis of the photosynthetic parameters, the yield and the quality of winter wheat
101-106Views:125The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and
varieties) suitable for the region and the site. The aim of our work is to parametrize the plant assimilation, its intensity, dynamics and the
most important characteristics and the relationships to the quality in winter wheat trials. The measurements were carried out at the research
site of the University of Debrecen in small parcel experiments. We measured the leaf net CO2 assimilation rate, stomatal conductance,
intercellular CO2 level, the transpiration, the leaf temperature and the air temperature by the LICOR LI-6400 portable photosynthesis
system in field trials on the nutrient supply. The soil of the experimental area is calciferous chernozem with favorable water regime.
We have examined the photosynthetic activity, the productivity and yield stability of winter wheat varieties. We have compared the yield
results, at similar agrotechnical conditions in seven cropyears. We also determined the quality parameters of the winter wheat varieties.
Then we valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the
connections between assimilation parameters, the yield stability and quality parameters of wheat varieties. -
Examinations of soil waterbalance in different crop-rotation systems of maize
41-49Views:73We examined the change of the time of water balance of soil in 25 years old experiment, on chernozem soil, in different croprotation systems (mono-, bi- and triculture) in dry (2007) and rainy (2008) cropyear in maizestock. According to our findings the values of waterdeficit of soil of maizestock were much smaller in 2008 than values of last year in not irrigated and irrigated plots of three of crop-rotation systems because of favourable supply of precipitation. We found difference between values of waterdeficit of two irrigation treatments. We measured smaller values in irrigated plots of three of crop-rotation systems before sowing. Waterstock of soil started to decrease with the rising of average temperature and despite of increasing of precipitation quantity in this way we calculated higher values of waterdeficit. Precipitation in August and high average temperature intensified the waterdeficit. Waterdeficit achieved highest values of croptime to front of September. We examined waterbalance of soilprofile in 0-200 cm and we concluded that the waterdeficit of the 80-120 cm soilzone was most intensiv in not irrigated and irrigated treatments because of significant rootmass.
-
The effect of short term storage on different winter wheat varieties rheological properties
83-86Views:153The aim of storage after harvest is to protect the quality of wheat, because after-ripening occurs in the first 5–6 weeks. During this time it very important to make the optimal storage conditions.
We have carried out storage experiment with wheat samples from Látókép Research Farm of the University of Debrecen. We analyzed the rheological parameters of Lupus and GK Csillag varieties from the crop year 2011/2012. The experiment period was between July and August 2012 (24. 07. 2012., 31. 07. 2012., 21. 08. 2012.).We determined the rheological parameters (water absorption, dough stability time and valorigraph quality number) of Lupus and GK Csillag during short term storage. Our results showed that after-ripening increased the baking quality of Lupus and GK Csillag during storage.
-
Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
35-41Views:336The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.
The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.
The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.
The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.
Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.