Search

Published After
Published Before

Search Results

  • Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
    31-41
    Views:
    406

    The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.

  • Information Technology Supports for Student-Centered Language Education
    3-6
    Views:
    156

    With the development of computer-mediated communication, the definition of literacy has gained broader dimensions (Murray, 1991). The ability to use new technologies to access, adapt and make intelligent use of information and knowledge is by now viewed as an additional and essential component of literacy. Today’s interpretation of literacy (often referred to as “multiliteracy”) must incorporate the communication that takes place through a growing variety of text forms associated with information and multimedia technologies.
    Since it is fast becoming a basic instrument for building the literacies required for success in academic and workforce environments, used as a tool, information technology needs to become a critical component of student-centered English language education.

  • The effect of keeping technology on the microbiological status of raw milk
    67-75
    Views:
    383

    The importance of the quality of raw milk increased after Hungary had joined to the EU. On delivery of raw milk, the microbiological quality, especially total plate count of the milk is very important. Twenty-two farms (7 large, 4 medium-sized, and 11 small farms) were included in the study. We considered the different farm size, keeping- and milking circumstances during the selection of farms. The examined large farms use loose housing system (cubicle, deep litter) and milking parlour. Most of them use preand post-milking disinfection. In the medium-sized farms, loose,
    deep litter and tie-stall housing system, as well as milking parlour, pipeline milking and bucket milking occurred. All of them use preand post-milking disinfection. Small farms use tie-stall housing system, bucket milking and udder preparation by water. Unfortunately, they do not use pre- or post-milking disinfection. In the large and medium-sized farms mainly Holstein Friesian, in the small farms Hungarian Simmental breeds can be found.
    The aim of our research was to examine the microbiological status of the raw milk produced in dairy farms (total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, psychrotroph bacteria count, furthermore yeast and mold count); sources of the contamination; connection between the microbiological quality of produced milk and housing-, milking technologies of farms; furthermore the hygienic circumstances of milking and milk handling of the farms, by the examination of coliform bacteria and Escherichia coli contamination.
    During the examination of the connection between the different farm sizes, various housing- and milking forms and the microbiological characteristics we observed similar tendencies in the case of total plate count, coliform count, yeast and molds count, furthermore psychrotroph bacteria count. The value of  these parameters was significantly higher in small farms, and infarms which use tie-stall housing forms, bucket milking, udder preparation with water, and which do not use pre- and post-milking disinfection.
    The results showed that besides cooling, the milking procedure and the type of udder preparation had the largest effect on the total plate count. Statistical analysis shows that in medium and small farms the combination of pipeline milking – tie stall housing system – disinfectant preparation of the udder; in large farms the combination of milking parlour – loose cubicle housing system – dry preparation of the udder are the most appropriate in the aspect of the total plate count. We experienced that in farms where the hygienic instructions are not followed – and therefore
    equipment used during the milking and handling of milk is very contaminated – or rather the separation of mastitic cows’ milk is not appropriate, different microorganisms may contaminate the produced milk. 

  • The effect of plant density to the yield results and the yield components of maize hybrids
    89-93
    Views:
    224

    Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
    technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
    The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
    performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
    According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
    The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
    calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way.

  • Effect of allithiamine on the level of hyperglycaemia-induced advanced glycation end products
    41-44
    Views:
    456

    Diabetes mellitus is a rapidly growing public health burden in both developed and developing countries. Diabetes mellitus is accompanied by hyperglycaemia, which can cause tissue injury by several mechanisms. One of these is the formation of advanced glycation end-products (AGEs). In this study, the effect of allithaimine, a fat-soluble thiamine derivative, was investigated on hyperglycaemia-induced AGEs levels using human umbilical cord vein endothelial cells (HUVECs) as a hyperglycaemic model. HUVECs were isolated by enzymatic digestion, characterized by flow cytometer and treated 30 mM glucose plus allithaimine or thiamine or cell maintenance medium as control.  Allithiamine was synthesized and purified. The structure of the synthesized and isolated compound was verified by reverse phase HPLC and MALDI-TOF. AGEs were evaluated by ELISA. Collectively, our results indicate that allithiamine can reduce level of the hyperglycaemia-induced AGEs similar to thiamine.

  • Changes in weed flora of basket willow (Salix viminalis L.) under different soil nutrient supply
    116-120
    Views:
    218

    The world is in a continuous progress, as a result of which energy consumption and with this the release of gases with adverse impact show rapid increase. As a result of the survey conducted by the International Energy Agency, if the major economic powers do not initiate a change in their energy policy, the increase of energy consumption may as well reach 40 % by 2030. This increased energy demand is getting more and more difficult to fulfill with the fossil energy resources, which is to lead to an increasing significance of renewable energy resources. In Hungary, these energy resources are the best to provide with biomass growth. Biomass growth for energetic purpose can mostly be provided by energy plants, out of which “energy willow” (Salix viminalis L.) is outstanding with its high yield and with its excellent burning technology characteristics of its timber. The willow’s cropping technology is being established in our country. One of our tasks is to work out an adequate weed control plan. The professional and safe use of herbicides can increase the success of production. In our paper, we discuss the weed flora data collected on  treatments applied in the different fertilizer and compost. We started our survey in 2010. We examined twelve different fertilizer and compost treated areas. The dominant weeds were: Amaranthus retroflexus, Chenopodium album, Echinochloa crus-galli among annuals; Cirsium arvense and Agropyron repens among the perennials. 

  • ZigBee technology in precision agriculture
    15-17
    Views:
    196

    ZigBee technology aims to completely satisfy the requirements set by precision agriculture, since this system makes it possible to collect data in an accurate and regular way. The cost of one module is rather favourable; therefore, damaged parts can be replaced quickly. Due to the modular structure, the system can be further developed easily. New units can be quickly incorporated into the network without any difficulty.

  • New challenges in soil management
    91-92
    Views:
    315
    Soil management represents two important tasks that are harmonization of the soil protection with demands of the crop to be grown on the given land under prevailing farming condition. Further goals are to preserve and/or develop the soil physical, biological and chemical condition and to avoid the unfavourable changes of the soil biological activity and the soil structure. Classical authors emphasised the importance of creating proper seedbed for plants. In the physical approach, tillage was believed to play an important role in controlling soil processes. Consequently, the period of several centuries dominated by this approach is referred to as the era of crop-oriented tillage (Birkás et al., 2017). The overestimation of the importance of crop requirements resulted in damaging the soils, which inevitably led to turn to the soil-focused tillage. Since the first years of climate change, as the new trends have raised concern, tillage must be turned into a climate-focused effort with the aim of reducing climate-induced stresses through improving soil quality.
    The development of soil management has always been determined by the economical background. At the same time, deteriorating site conditions have contributed to the conception of new tillage trends by forcing producers to find new solutions (e.g. dry farming theory in the past or adaptable tillage theory nowadays). Győrffy (2009) recited the most important keywords were listed in 2001 and that seemed to be important in the future of crop production. These keywords (endeavours) were as follows:
    − Biofarming, organic farming, alternative farming, biodynamic farming, low input sustainable agriculture;
    − Mid-tech farming, sustainable agriculture, soil conservation farming, no till farming, environmentally sound, environmentally friendly, diversity farming;
    − Crop production system, integrated pest management, integrated farming, high-tech farming;
    − Site specific production, site-specific technology, spatial variable technology, satellite farming;
    − Precision farming.
    Győrffy’s prognosis proved to be realistic and the efforts mentioned above have mostly been implemented. New challenges have also appeared in soil management in relation to the last decades. The most important endeavours for the future are:
    1) Preserving climate-induced stresses endangering soils.
    2) Turn to use climate mitigation soil tillage and crop production systems.
    3) Applying soil management methods are adaptable to the different soil moisture content (over dried or wet may be quite common).
    4) Use effectual water conservation tillage.
    5) Use soil condition specific tillage depth and method.
    6) Adapting the water and soil conservation methods in irrigation.
    7) Preserving and improving soil organic matter content by tillage and crop production systems.
    8) Considering that stubble residues are matter for soil protection, humus source and earthworm’ feed.
    9) Site-specific adoption of green manure and cover crops.
    10) Applying site-adopted (precision) fertilization and crop protection. Considering the development in agriculture, new endeavours will occur before long.
  • The potential use of Pediococcus spp. probiotic in aquaculture: A review
    99-106
    Views:
    475

    Aquaculture production has significantly increased over the previous few decades. However, antibiotics have been implemented regularly and extensively to overcome outbreaks of pathogens in aquaculture to cover the human needs for animal protein, leading to the appearance of resistant strains that may cause serious damages in the environment and also human health. In the last few years, the implementation of probiotics as an alternative technique to antibiotics use in fish production has achieved promising results in aquaculture due to their beneficial impact on fish health and growth performance. Among different types of probiotics, the Pediococcus spp. bacteria stand out as a promising probiotic for their beneficial impact to aquaculture. Thus, the current study has been conducted to give an overview about the interactions between Pediococcus spp. and aquaculture. In addition, this review highlights the role of Pediococcus spp in promoting growth performance, improving feed conversion ratios and the intestinal architecture, enhancing the immune response and inhibiting fish pathogens, thereby preventing or at least reducing the use of antibiotics. Practical use of Pediococcus spp. probiotic in aquaculture as feed additives through selected case studies is also considered.

     

  • A review on fish in vitro digestion studies
    55-63
    Views:
    9

     (1) Background: In vitro experiments in fish have been developed to search for dietary substitutes of fish meal in aquafeeds by measuring the digestibility of various feedstuffs by simply simulating the conditions of the stomach or portions of the digestive tract. In vitro digestion studies involving mainly commercial fish species have been conducted to determine the digestibility of conventional and alternative ingredients in fish diets using diverse digestion models. However, there remains a significant knowledge gap, particularly regarding the enzyme functionality, digestion mechanisms in many fish species, and the factors influencing enzymatic activity. This review article is focused on the importance of the use of different enzyme sources in the in vitro digestion model to predict protein hydrolysis.;(2) Methods: For this review, a comprehensive analysis of articles was conducted to gain insights into diverse enzyme interactions and feed evaluation assessments, from the nutritional science and biotechnology sector.; (3) Results: A total of 36 peer-review papers, which include original, and review articles were selected.; (4) Conclusions: In vitro digestion studies offer a valuable tool for evaluating the digestibility of conventional and alternative feed ingredients, helping to identify sustainable dietary substitutes for fish meal while reducing dependence on live animal trials.

  • Comparison of chemical parameters of enzyme active and inactive malt types
    161-166
    Views:
    371

    Nowadays there is an increasing emphasis on the use of raw materials. Typically, raw materials – in this study malt – are used in animal feeds and used in the brewing industry. However, in terms of quality (eg. high fibre content), these can be included in human nutrition, we have limited information on this possibility. The aim of our work was to compare different malt flours and examine the possibility of using malt in the baking industry. We were to investigate some of the most relevant parameters, such as dietary fibre content, crude protein content, fat content, carbohydrate content, dry matter content, moisture content, salt and energy content. In the future, we aim to conduct a research on some of these parameters with different malt types as the brewing industry uses novel ingredients different cereals, pseudocereals such as amaranth (Amaranthus spp.), oat (Avena sativa L.), quinoa (Chenopodium quinoa Willd.) in addition to the spring barley (Hordeum vulgare L.) or wheat (Triticum aestivum L.). Based on brewing studies, malt has a high fibre and protein content. Having these advantageous qualities, malt should be part of humans’ healthy diet. Using malt flour in the baking industry can be a new direction which can lead to creating a healthier lifestyle and healthier eating habits than suggested by the WHO (World Health Organization).

  • Development of the reproductive tract of immature gilts
    165-166
    Views:
    139

    Mechanisms of regulation of litter size in pigs are complex and depend on many factors, including genetic regulation and also physiological and anatomical development of the reproductive tract in gilts. Improvement of growth rate in present breed pigs raises the question as to whether, with the development of the reproductive tract, sexual maturity would also be attained.
    The aim of the study was to assess the morphometric traits of reproductive tracts taken from gilts slaughtered at 100 kg body weight, i. e., just when they may become actively sexual mature.
    This study was concluded on 80 prepubertal gilts of the Polish Landrace (PL) breed tested at the Pig Program Testing Station. The animals were kept in individual pens with control feeding and standard management. They were slaughtered after attaining 100 kg body weight. Immediately after slaughter, the reproductive tract was removed and carefully assessed. The morphometric estimation of the reproductive tract involved the
    measurement of uterus weight with ligament, vagina-cervix length, uterine horns and oviducts length, ovaries weight, height and width. Uterus volume capacity was also determined, based on volumetric method of Kwaśnicki’s (1951) with own modification.
    All pigs were divided into three groups in respect to age at slaughter: A – below 160 days (n=38), B – from 160 to 180 days (n=28) and C – above 180 days of age (n=14). The results were elaborated statistically computing the arithmetic means (x) for every traits and standard deviations (s). One-way analysis of variance ANOVA was performed. The significance of differences between age groups was estimated using Duncan’s test.
    Calculations were performed with STATISTICA 8PL Software.
    Obtained results are presented in the tables below. The most pronounced differences in the development of the reproductive tract are dependent on the age of gilts concerning only the uterus weight (P≤0.01) and uterus vagina-cervix length (P≤0.05). Gilts at age 160-180 days attained the full stage of reproductive tract development. Differences between the compared age groups of gilts dealing with the other morphometric traits
    and ovary characteristics were statistically not significant.

  • The scientific background of competitive maize production
    33-46
    Views:
    840

    The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant density, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.

    Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.

    Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.

    The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.

  • Interactions of the scientific results and practice in the biodiesel plant in Mátészalka, in the eastern tri-border area of Hungary
    23-27
    Views:
    156

    This study summarises the observations about the operation of the first Hungarian model-like biodiesel plant (which has a producer background). In order to efficiently and safely operate the applied technology and to produce biodiesel that conforms to international standards, it was indispensable to apply the scientific results in practice and to develop a cooperation with the University of Debrecen (Centre of Agricultural Sciences and Engineering). The biodiesel plant has a significant importance from the aspects of the Eastern tri-border area and the North Great Plain region. 

  • Pre-treatment of wastes containing keratin in industrial conditions
    59-64
    Views:
    448

    The aim of the research was a development of a featherdegradation technology in industrial circumstances. During the experiments we determined the parameters of the critical environmental and technological limitation factors. Because of the high keratin-content the degradation (and composting) of the feather is difficult. With the developed technology huge mass of feather can be used fast and easily in biogas production and in the adjustment of the optimal element ratio of biomass. The industrial experiments were implemented in a 6m3 heatable double-walled
    tank with stirring-shovels and aeration-system. The degradation process was followed with extinction measurements.
    According to the experiments that were done the best results were given at the case which was heat-treated at 70°C, was injected with 1% bacteria concentration, and where 1:3 feather:water ratio was set if we consider the effectiveness of degradation and the hydraulical retention time.

  • Topology in the fruit plantation
    253-257
    Views:
    431

    The localization of fruit trees, the topology of the branch structure and the spatial structure of the canopy are important to plan sitespecific agro-ecological and production technology projects in an orchard. The currently used instruments and technologies – in the precision agriculture – give opportunities to obtain these informations. The examinations were carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer. The collected spectral data were completed with the 3D point cloud by Leica ScanStation C10 laser scanner. The laser impulse data and the vegetation index values were integrated in a unified 3D system. The integration of the two special data collection system provides new opportunities in the development of precision production technology system. The results could be directly used in phytotechnology, water management, plant protection and harvesting in orchards. Our elaborated method can supply digital high spatial accuracy guidance data for development of the automated machines, which could provide some new developmental way in the immediate future.

  • Agronomical and economic evaluation of various cultivation systems on meadow soil
    103-106
    Views:
    181

    The requirements and objectives of cultivation are in constant change. There are different cultivation aims if the objective is soil protection, the prevention of its moisture content or on areas with different precipitation supply or production site endowments. Based on the experimental database of the Institute for Land Utilisation, Regional Development and Technology of the University of Debrecen, Centre for Agricultural and Applied Economic Sciences and the KITE Plc., the various cultivation systems in Hajdú-Bihar country were examined with maize as indicator plant. The sample area can be found in the outskirts of Biharnagybajom on meadow soil. On the examined plot, spring strip basic cultivation, loosening and autumn ploughing were applied on 15-15-15 ha, respectively. At the time of taking undisturbed soil samples, soil conductivity measurements were also performed with a Penetronik penetrometer. Undisturbed soil samples were taken from each treatment before sowing (on 5th April 2012). The yield obtained in the strip cultivation treatment increased that of the ploughing and the loosening technology. The economic indexes are the most favourable in the strip cultivation.

  • Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
    47-54
    Views:
    482

    Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
    Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
    The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
    The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage  experiments at two pilot locations to prove tillage technologies already used in the USA.
    The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
    On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
    To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
    Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area,  calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
    Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
    Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies.

  • Decreasing Energy and Water Use in the Meat Industry
    24-28
    Views:
    146

    The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.

  • The effects of agrotechnological factors on winter wheat yield in humid cropyear
    162-167
    Views:
    281

    The effects of crop rotation, nutrien supply and crop protection technologies, as well as the appearance of the main ear- and leafdiseases
    (powdery mildew, helminthosporium leaf spot, leaf rust, fusarium) were studied on the crop yields of winter wheat variety MV
    Pálma during the 2009/2010 crop year. The experiments were conducted in triculture (pea – wheat – corn) and biculture (wheat – corn), at
    five nutrition levels, with the use of three crop protection technologies (extensive, conventional and intensive) at the Látókép Research Site of
    the University of Debrecen, Centre of Agricultural Sciences. Our results proved that the appearance of leaf- and ear-diseases were
    significant in the wheat cultures during the 2009/2010 crop year, because of the rainy, warmer than usual weather, the lodging, and the huge
    vegetative mass developed. The most severe infections by the four examined diseases after pea and corn pre-crops were observed at
    extensive crop protection levels, when fertilizers were used at the highest dose.
    Following corn pre-crop, in the case of all the three crop protection technologies the maximum rate of wheat yield results were achieved
    at N150+PK level. The highest yield was reached at intensive crop protection level (6079 kg ha-1). In triculture, in case of all the three crop
    protection technologies the maximum yields were achieved at N50+PK level; in extensive technology 5041 kg·ha-1 yield, in conventional
    technology 6190 kg ha-1 yield was realised, while in the intensive technological model the yield was 7228 kg ha-1.
    The relationship between yield and fertilizer amounts, the rate of pathogen contaminations, crop protection technologies and pre-crops
    was defined with correlation analysis in case of different crop rotations during the 2009/2010 crop year. Based on the results of the
    experiment, we found that in stands after corn pre-crop strong positive correlation was established between the crop protection level and the
    crop yield (0.543), the nutrient levels and the emergence of the four examined pathogens, and between the nutrient levels and the yield
    (0.639). Extremly strong positive correlation was observed between crop protection and yield (0.843) in triculture. Strong positive
    correlation was detected between the nutrient levels and the presence of the four examined pathogens, as well as between nutrient and
    lodging (0.688). Strong negative correlation was between the crop protection level and the four examined diseases both in biculture and
    triculture.

  • Global and national economic importance of pig meat production
    13-20
    Views:
    551

    The pork production has changed significant in recent decades. Pig production fell significantly due to the need to adapt to new animal welfare rules in the sector. Furthermore, change in the meat consumption habit had also a negative effect on pig meat production. Hungarian pig sector and meat industry are in a difficult situation. Due to the high feed prices, the average production cost of pig farming has often exceeded the  producer prices in recent years, therefore an increase of pig population could not be realised yet. Pig market is characterised by cyclical fluctuations of supply and prices, furthermore the decreasing producer price occurred parallel with increasing feed prices.
    Technology is also a critical fact in the Hungarian pig sector because there is a huge gap in the level of technology compared to that of competitive member states. With the development of production methods the efficiency of pork meat production can be improved in an environmentally friendly way.

  • The Examination of Some Determining Elements of Efficient Practical Sweet Corn Growing
    81-85
    Views:
    227

    We did the detailed agronomy examination and assessment of sweet corn cropping technology by analysing the data of TONAVAR Ltd. The Ltd. developed a special sowing construction which is based on band application of main sowing and double growing. In main sowing they use super sweet hybrids, and in double growing they use normal sweet varieties. In double growing sugar peas and the sweet corn can be cultivated together successfully. In every two years appearing sugar peas has a good effect on the sweet corn growing in monoculture. At the same time
    the long-term successfulness of this questionable onto the illnesses of the peas because of the considerable sensitivity.
    According to our examinations in main sowing the optimal period is between May 1. and 30., and in double growing the optimal period of sowing is between June 1. and 20. The optimal plant density is different too for the two sowing time. For super sweet hybrids the optimal plant number is 60-63 thousand/ha and for the normal sweet that is 65 thousand/ha.
    Our examinations show that soil pest (defence with soil sterilisation in sowing time), Diabrotica virgifera, Helivoverpa armigera, Ostrinia nubialis are the greatest danger for the sweet corn quantity and quality.
    The use of herbicides is the most efficient in the postemergens in main sowing and preemergens in second crop.
    Our examination shows that the efficient sweet corn growing cannot be imagined without irrigation. The most efficient irrigation is in main sowing in the critical fenophase of crop time. In double growing the initial irrigation, and the crop irrigation are the most efficient. Based on the production data verifiable that beside the application of the discribed growing technology in the 2005-2007 years the average yield was 20,9t/ha of main sowing, and 17,8t/ha of second crop on chernozem soil in the Hajdúság. 

  • Effects of soil cultivation and environmental changes on maize yield
    97-100
    Views:
    264

    We evaluated the relationships among soil cultivation and other agrotechnical factors (fertilization, number of plants and hybrid) within the framework of a multifactorial long-term experiment set at the Látókép Experimental Site of the Centre for Agricultural Sciences of the University of Debrecen in mid-heavy chalcareous chernozem soil based on a long-term experiment conducted for a 5-year period (2002–2006).

    Based on the evaluation of soil cultivation by the average of treatments, it may be assessed that spring ploughing (8.204 t ha-1) provides more favourable conditions to the stand compared to spring shallow cultivation; however, this did not result in a significant difference. Spring ploughing considerably increased the yield of hybrid FAO 300 in dry years, whereas it considerably increased the yield of hybrid FAO 400 in favourable crop years. A stand of 70 thousand stems/ha provided the higher yield result in both soil cultivation types. It was sufficient to use a fertilizer dose of 120 kg N ha-1 for economical production.

  • Agronomical and economic evaluation of different soil cultivation systems
    47-52
    Views:
    191

    In the interest of profitable plant production and environmental protection, we have to make an effort to protect and improve the productivity of our soils while moderating production limiting factors. Due to different soil cultivation methods, the quantity of yield and required expenses also differ.
    We examined the production costs in four different production technology systems. Overall, it can be said that farming standards are good, since cost prices were low (2001: 14-15 HUF/kg, 2002:15-21 HUF/kg, 2003: 39-49 HUF/kg) in the case of all main products per 1 kg. Cost prices were lowest in the case of direct sowing, probably due to low machinery costs.
    All economic indicators have to be compared when choosing the most suitable production technology in a specific farming environment.

  • Development opportunities of biomass-based ethanol production in relation to starch- and cellulosebased bioethanol production
    71-75
    Views:
    253

    The biomass is such a row material that is available in large quantities and it can be utilizied by the biotechnology in the future. Nowadays the technology which can process ligno cellulose and break down into fermentable sugars is being researched. One possible field of use of biomass is the liquid fuel production such as ethanol production. Based on the literary life cycle analysis, I compared the starch-based (first generation) to cellulose-based (second generation) bioethanol production in my study considering into account various environmental factors (land use, raw material production, energy balance). After my examination I came to the conclusion that the use of bioethanol, independent of its production technology, is favorable from environmental point of view but the application of second generation bioethanol has greater environmentally benefits.