Search
Search Results
-
Strategic Steps in the Sheep and Goat Branches
61-68Views:130The balance of the sheep and goat branches can be summarised as follows:
If the increase in stock size, specific yields, genetic improvement and modernisation are not realised, several thousand shepherds will lose their jobs and possibilities to work, and their families will lose their only source of livelihood.
Several hundred hectares of grassland will become weedy and the costs of crop protection will increase in these regions. Pollen pollution, the number of allergic ailments and medical costs will increase, mentioning only the main disadvantages. Its financial requirement is nearly equal to the one required for development without any essential compensation or production.
In order to develop a competitive branch, a subsidisation of 10-20 billion HUF is needed until the accession of Hungary to the EU, depending on the scale and progressivity of development. The subsidisation and realisation of the strategic steps would result in:
– the establishment of a registered livestock with 1.5 million ewes, which would ensure better market position for the branch in the EU (5%),
– the establishment of a competitive and marketable branch with a production value of 15-25 billion HUF, calculated using the present price level (after accession, the branch would be self-operating and profitable, with the 6-8 billion HUF/year normative subsidisation by the EU),
– the establishment of a genetic potential which would ensure our participation in profitable international breeding animal market, which provides extra profit,
– the establishment of a sheep husbandry with better genetic potential and phenotypic performance, producing a quality of international level,
– the maintenance of the workplace of more than 10.000 people (saving 3-5 billion HUF/year of the budget),
– the maintenance of the condition of growing areas of grasslands with their advantages (crop protection and public health) whose financial effect is considerable. -
The Possibilities of Futures and Option Hedge in Price Risk Management for GrainProduction
72-80Views:81The greataest risk tograin production is fluctuation in market prices, which is over 50% over the course of a year; and year by year, as well. There are real market circumstances in the grain market, instead of state guaranteed fix prices, which was the norm under the former political system.
According to the general opinion of producers, losses come from their defencelessness against buyers. The real situation is that price risk can be managed by suitable market strategy, and loss production can be avoided.
Hungary has a futures market (which is organized according to the CBOT system) in the grain sector, which is an unique institute in Europe. This organisation is suitable for hedge businesses and it has convenient technical and institutional background.
There are two possibilities to make hedge business. One of them is the short hedge with futures contract when the producer sells his product for long term if an acceptable profit is included in market price. In this case seller can protect himself against low market prices.
This technique can be considered as professional for price risk management, but possibly has financial cost because of the weak financial situation of Hungarian producers this solution seems expensive for them.
There is an other possibility in the Commodity Exchange for manage price risk, that is the option technique. This solution is suitable for insure prices as well, and has an other additional advantage, namely: there is no financial costs in this case. -
The effect of nickel-contamination, nitrogen-supply and liming on the chemical composition of perennial ryegrass (Lolium perenne L.)
85-92Views:97Plant-production is determined by many production-factors. Each of these factors became subject of research-works through the years, still we state, that studying their interaction is even more important. For studying these interactions we set up a potexperiment, within that the direct effect and the interactions of four factors was inspected: soil, nitrogen-supply, nickel-loading and liming. Experiments were carried out on two soil types with extremely different characters: one was a chernozem soil with good fertility and buffering capacity, the other was a shifting sand soil with low humus-content and buffering capacity. Nitrogensupply and liming was added on two levels, while nickel on three within 12 combinations on each soil types. Plant production was cut two times within the vegetation period. The amount of production and dry matter was weighted, fractured and their element-content was measured by an ICP-detector.
Ca-content on the shifting sand soil was determined by all three factors, however the interaction between nickel-loading and liming was also significant. Nitrogen and liming increased Cauptake, that is due to appropriate nutrient-supply and improvement of a better pH-value. On the chernozem soil nitrogen and CaCO3 also increased the Ca-content. This is caused by a better nutrient supply and a higher amount of available Ca-ions.
On the shifting sand soil nickel content was increasing parallel to higher nitrogen-dosages. In presence of higher nickelamount the nickel-content of plants was also increasing, still according to liming, this increment was different. On the chernozem soil nitrogen a nickel increased Ni-uptake. However, liming also had a positive effect on Ni-content, that can be explained by the high amount on colloids in the soil, the adsorption of Ni-ions on them and in presence of liming material the replacement of Ca-and Ni-ions.
The potassium-content on the shifting sand soil was different in each liming-combination. In combinations without nickel the potassium-content of limed and not limed combinations was on the same level. In not limed combinations by adding nickel potassiumcontent was increasing, while in limed combinations no change was observed. On the chernozem soil by adding liming material the amount of uptaken potassium was decreasing, that is due to the antagonism between Ca- and K-ions. -
Environmental friendly maize (Zea mays L.) production on chernozem soil in Hungary
133-135Views:99We have been studied the effects of crop-rotation, fertilization and irrigation on the yields of maize in different cropyears characterized
by different water supply (2007 year=dry; 2008 year=optimum) on chernozem soil. Our scientific results proved that in water stress
cropyear (2007) the maximum yields of maize were 4316 kg ha-1 (monoculture), 7706 kg ha-1 (biculture), 7998 kg ha-1 (triculture) in non
irrigated circumstances and 8586 kg ha-1, 10 970 kg ha-1, 10 679 kg ha-1 in irrigated treatment, respectively. In dry cropyear (2007) the
yield-surpluses of irrigation were 4270 kg ha-1 (mono), 3264 kg ha-1 (bi), 2681 kg ha-1 (tri), respectively. In optimum water supply cropyear
(2008) the maximum yields of maize were 13 729-13 787 (mono), 14 137-14 152 kg ha-1 (bi), 13 987-14 180 kg ha-1 (tri) so there was no
crop-rotation effect. In water stress cropyear (2007) fertilization caused yield depression in non irrigated treatment (control=2685 kg ha-1;
N240+PK=2487 kg ha-1). Our scientific results proved that the effects of abiotic stress could be strongly reduced by using the optimum crop
models in maize production. We obtained 8,6-11,0 t ha-1 maximum yields of maize in water stress cropyear and 13,7-14,2 t ha-1 in optimum
cropyear on chernozem soil with using appropriate agrotechnical elements. -
Comparative study of different soybean genotypes in irrigation technology
91-95Views:283In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.
-
Regional economic achievements and reindustrialisation in Hajdú-Bihar county
65-74Views:193The North Great Plain region is one of the backward regions of Hungary. The low level of economic development is mainly due to the lack of industrial development. The region is poor in natural resources, its main resources are land, natural gas fields, carbon dioxide, thermal water and the clay mineral stock.
The structure of GDP per capita of the county is different than the country average mainly because of the high proportion of agriculture.
The proportion of the industry and the building industry is not significant. Of the various service provider sectors, trade, transport and telecommunications have a small proportion, while financial and economic service providers have even lower share, which is due to the fact that these sectors are mostly concentrated in Budapest. The share of public and human service prodivers is higher than average due to the University of Debrecen.
The GDP which expresses the economic development of the county in a complex way increased four times its previous value in nominal value between 1995–2009. However, if the real value is considered, the increase is less than 25%, as opposed to the country average, which was less than 40%.
The most complex index of the development level of an economy is GDP expressed either in nominal or real value. If expressed in dollars, GDP is suitable for international comparison with the correction based on the purchasing power parity per person.
The county represents 4.3% of the people employed in the industrial sector in Hungary, while its share in industrial production is only 3.3% which is lower than the regional and population share of the county within Hungary. As regards industrial production per person, Hajdú-Bihar was the 10th county in Hungary; therefore, it is considered to be a less industrialised county.
The product structure of GDP is suitable for drawing useful development conclusions, but the result is more reliable if the income creation ability is also analysed on the basis of the employment structure. -
Realisation of customer focus from quality and forage safety aspects in the Hungarian mixed feed production
35-38Views:114Customer focus is one of the main principles of Total Quality Management, and it is inevitable for long term, mutually successful vendorcustomer partnerships. The strictly controlled quality management systems of animal feed industry ensure that product quality meets the expectations of all parties involved and, indirectly the reliability of human food raw materials. Meanwhile, the participants of agricultural production are variably quality conscious, so feed manufacturers support their supply chain and also their customers with professional background and they play a key role in safe food chains from farm to fork.
-
Testing laboratory parameters of compost tea
31-36Views:430During the industrial production of broiler chicken, a large amount of manure is produced, of which easily contained nitrogen content (without pre-treatment) is released into the atmosphere as an air pollutant. In our experiments, we aimed to prepare compost tea, also known as water extract of compost, from pre-treated poultry manure in order to create a product can be utilized as liquid nutrient supply. The poultry manure source was the Baromfi-Coop Ltd. located in Nyírjákó, Hungary, where it was treated by composting. As a result of this pre-treatment of the poultry manure, its nutrient parameters improve and nitrogen is present in a form that is better utilized for plants. Furthermore, this product is suitable for further utilization and also can be the base material for a brand-new product. For this reason the effects of compost/water ratio, incubation time, low oxygen level, and extraction time on the parameters of the resulted product were studied in the frame of developing new soil-life enhancing microbial product, so-called compost tea.
Chemical parameters of the compost used as base material strongly determined the properties of the resulted compost tea, especially the ratio of the various nitrogen forms, their concentration and the salt content. It was found that adding water at a higher rate that means 1/40 and 1/50 mixing ratios results in more cost-effective production. In the experiment the compost tea were held under oxygen-poor conditions, therefore pH of the extractions decreased, which influenced the quality and quantity of their nutrient content.
-
Basil (Ocimum basilicum L.) harvest and plant replacement methods in aquaponia
91-98Views:62The aim of the study is to investigate the potential of basil leaf mass production under aquaponic conditions with different harvest and plant replacement methods. Aquaponics is a combination of soil-less crop production hydroponics and aquaculture and it is can use and clean the wastewater of intensive aquaculture systems. Three groups were established in the 6 units during the six-week harvest and seedling rotation cycles. Group 1 individuals remain in the units throughout the breeding season. Group 2 individuals were replaced every 12 weeks, while Group 3 individuals were replaced every six weeks, at the same time as harvest. Data from the experiment were analysed to determine how the harvest and replacement protocol of basil plants influences the amount of leaves harvested, the percentage of leaves harvested relative to the plant stem, and the changes in plant height, SPAD and NDVI during harvest and replacement. A continuously maintained and harvested healthy basil stock under aquaponic conditions can provide a consistent leaf mass all year round without the extra cost of replacing and producing seedlings.
-
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:168In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
Previous data on the relationship between the intensity of pruning and the degree of damage in integrated and organic applegrowing systems
47-52Views:96In Hungary, fruit growers are increasingly interested in environmentally friendly growing methods, such as organic and integrated systems. Vital is the establishment of a strengthened system of cultivar-pruning-plant protection in production technology. Consequently, our aim was to examine the susceptibility of apple cultivars to diseases and pests and the effect of pruning technique on diseases and pests in organic and integrated growing systems.
Two pathogens (Venturia inaequalis, Podosphaera leucotricha) and two pests (Leucoptera malifoliella, Pannonychus ulmi) were observed in organic and integrated systems under „strong” and „weak” pruning techniques. Our results on six cultivars showed that the pathogens and pests infested the trees more in the organic system, as compared to that of integrated production. The pruning technique affected mainly the susceptible
cultivars to diseases and pests. The „weak” pruning technique caused a higher level of diseases and pests infestations than the „strong” pruning technique, especially in the organic growing system. The likely reason is that the shoots grow fast and powerfully under “strong” pruning technique. This supports better preservation of the trees supported by susceptibility of plant tissues to diseases and pests. -
Weed control possibilities of „energy willow” (Salix viminalis L.)
108-112Views:110In Spring 2005, the owner of the Szalka-Pig Ltd. of Mateszalka, decided to import the willow species Salix viminalis L. and to create a plantation for energy production purposes on the humid arable lands in his ownership. In 2006, he enlarged this area by 43 hectares. The owner further decided not only to plant this species on the more adherent (KA 70), but also onto the incoherent structured sand (KA 30-35). His main argument was that the cost of coal tar derivatives as energy sources was rapidly increasing in Hungary, so he needed to find a cheaper energy source for the drying of his products and for the heating of his buildings. He also planned to change his gas and oil heating equipment.
The willow’s cropping technology is being established in our country. One of our tasks is to work out an adequate weed control plan. The professional and safe use of herbicides can increase the success of production. In our paper, we discuss the data collected on treatments applied in the pre-emergent stage. The applied herbicide combinations (terbutilazin+S-metolaklór, mezotrion+ S-metolaklór, pendimetalin+S-metolaklór, oxyfluorfen+ S-metolaklór) yielded good results in large scale experiments. -
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
56-61Views:118The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.
-
Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
32-37Views:89Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area located in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.
-
Study of plant production modells with different intensity in winter wheat production
51-60Views:102The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, intensive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
100 mm) were applied in different crop rotation systems.
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was 7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649). -
The impact of sowing date, production area and nutrient supply on the yield and quality parameters of millet
105-109Views:101The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies to the efficiency of the agrotechnological elements. The examinations – focused on this aspect – was conducted in the DU CAS RINY in the small plots in four replications in 2013. The largest effect was recorded in the sowing time of the examined factors (sowing time, nutrient supply, growing area). The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing. The examined factors did not affect in the protein content and milling rate, except in the latest sowing time when protein content was significantly the highest.
-
The impact of cultivar and irrigation on yield, leaf surface temperature and SPAD readings of chili pepper
103-108Views:192Paprika is an extremely popular and widespread plant species in Hungary. Chili peppers belongs to paprika and it can be consumed fresh or processed. The production of peppers began with the cultivation and control of some parameters for good results of paprika production. The aim of this article is to compare the water supply of four chili pepper hybrids ("Habanero", "Hetényi Parázs", "Unikal" and "Unijol") by means of investigation on open field and to examine how different temperatures and water stress factors influence the yield of chili peppers. The experiment area consisted of four different hybrids in three different irrigation treatments (control, deficit- and regular irrigation). The chlorophyll content was estimated with SPAD and the leaf surface temperature with Raytek MX4 TD. Our research concluded that deficit irrigation produced the highest yields for all cultivars and the lowest yields for the highest water supply.
-
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
89-93Views:122The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties.
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed.
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance. In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half, while no significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. -
Analytical overview of dairy industry in the Poltava region, Ukraine
47-51Views:127The author presents essential characteristics of the state and place of Poltava region in it. The study aims at identification and description of latest trends in Ukraine’s and Poltava’s dairy industry. The author stresses an important place of the dairy industry in the agriculture of Ukraine, and particularly in the Poltava region. This article also presents the information of main indicators of dairy industry of Ukraine in the comparison with other countries of the World. It describe sources of forming the main agricultural products and directions of their use for the calendar year, data on per capita consumption of main dairy products in Ukraine and the Poltava Region and per capita average daily consumption of basic micro- and macro elements in foods. The study contains basic indicators which characterize the social and economic state of agriculture in Ukraine and its regions for 1990–2012. There are also the data of gross production and main kinds of dairy products per capita and as well as some indicators of livestock’s productivity and so on.
The goal of the article is to describe the complex evaluation of the achieved level of milk production, consumption of milk and dairy products in Ukraine and the Poltava Region, to show the specifics of the national dairy cattle breeding, identifying the main challenges in it.
-
Economic Importance and Production Problems of White Lupin
122-125Views:72This paper presents economical importance of white lupin /Lupinus albus/. It is an important task as exceptional effectual green manure, that shows VIII treatment’s results of Westsik long-term field experiment. Content of white lupin seed is similar than content of soybean. By the forrage examination the soybean can substitute whit white lupin seed in 40%. The main problem of the production of lupin seed is the want of long term herbicides. For the solve of this problem to find herbicides which are efficiant for 80-100 days. First we have try 26 different herbicides.
-
Possibilities of downsizing sweet cherry trees via growing techniques
71-74Views:186By applying smaller crown sizes and intensive growing techniques, many advantages can be identified compared to the extensive orchards. Also, nursing/pruning and harvest work can be performed more effectively. The outer and inner quality parameters of the fruit and the effectiveness of plant protection techniques are improved. The smaller crown size enables us to apply technologies for ensuring yield safety (e.g. hail, rain, bird nets), resulting in an increase in productivity. The introduction of smaller trees poses a great challenge to cherry production. Trials with dwarfing rootstocks have not yet been successful, therefore, we must use the cv. Mahaleb rootstock, which is excellently adapted to the Hungarian conditions, and also has a stronger growth. In addition, rootstocks with such strong growth are needed for the necessary regeneration of the productive parts of cherry cultivars, there is a need for. At the research garden of the University of Debrecen in Pallag, we planted 21 cherry cultivars on cv. Mahaleb (CT500) rootstock, in a 4 m x 1 m spacing pattern, in the spring of 2000. In our study, we demonstrated the possibilities of developing and maintaining the string super spindle through repeated summer pruning, in terms of growth, bud and fruit formation,. Based on these parameters, we determined which cultivars are the most suitable for intensive production.
-
The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
63-68Views:100The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
heat-energy. The product electricity is used by the local plants, the surplus is sold.
The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio. -
Harmonic development and biodiesel
91-95Views:86An increased expansion of renewable resources and biodiesel is observed and prognosed, since fossile energy resources are about to run out. Hungary achieved outstanding sunflower years in the recent years in worldwide comparison. In the future, the feedstock of biodiesel production can also be rape besides sunflower.
According to the concept of harmonious development, the balance between nature, society, economy and human environments is represented by their mutual presumptive character. Research and development need to be aligned into this system. Our aim was to examine the advantages and
disadvantages of biodiesel production in different environments, using a model to do so. In order to maintain the harmony, the existing resources have to be managed properly, taking the correlations of the system into consideration. Targeted technological developments are necessary, similarly to the improvement of energy safety and efficiency. -
Evaluation of the relationship between main type traits and longevity in Hungarian Simmental cows
205-209Views:127The Hungarian Simmental cattle is a dual-purpose breed, having good milk and meat production characteristics. Simmental cows have some other important traits, for example, a longer productive life. The longevity or productive life is the time period between first calving and culling. The conformation contributes to productive life, reproduction, and milk production.
The aims of this study were to analyze the longevity of Hungarian Simmental dual-purpose cows, to evaluate the effects of the size of the herd, age at first calving, main type traits (frame, musculature, feet and legs, mammary system), and combination of main type traits (frame and musculature, feet and legs and mammary system).
Animal, age at first calving, herd*calving, musculature, the mammary system as well as the combination of mammary system and feet and legs were significant effects on longevity. The highest risk ratio was observed for cows first calved after 31 months. The risk of culling increased with increasing scores of musculature and decreasing scores of the mammary system. The highest risk ratio was estimated in category 11 (lower scores of mammary system with lower scores of feet and legs). In this case, the risk ratio was 36% higher than the reference group.
-
Preliminary Research Concerning the Association Between the Genotypes at the Kappa-Caseine Locus and Milk Production Traits in Cattle
45-48Views:93The genotypes for kappa-casein locus were established using PCR-RFLP. Genome DNA for PCR amplification was isolated from hair roots in cows (30 Schwitz individuals), and from frozen semen in bulls (42 bulls of different breeds).
A higher frequency of the B allele in Schwitz (pA = 0.45 and qB = 0.55 in cows and pA = 0.25 and qB = 0.75 in bulls), and a higher frequency of the A allele in bulls belonging to different breeds (pA = 0.61 and qB = 0.39 in Deutsch Simmental, pA = 0.84 and qB = 0.16 in Romanian Simmental; pA = 1.00 and qB = 0.00 in Holstein, and pA = 0.67 and qB = 0.33 in Pinzgauer) were estimated. The associations between the genotypes and alleles determined at the kappa-casein locus and milk production were tested. They emphasized significant associations only for milk and milk fat quantity, in advantage of individual carriers of the B allele in homozygous and heterozygous states.