Search
Search Results
-
Numerical Model Analysis of Natural Gas Combustion Burners
67-71Views:159Traditional power plants still the dominating power source for all the major industries and powerdemanding facilities, the most crucial facility for the whole plant operations is the industrial boiler which generatessteam, heating energy or electrical power. Boilers generate energy by combustion. The improvement of combustion efficiency could greatly influence the energy consumption and will make the boiler more efficient and cleaner (less emissions), that’s why it is important to understand the combustion and thermal flow behaviours inside the boiler. Beside experimental testing, computational work nowadays becoming more and more important due to lower cost and acceptable accuracy with minimum error. With numerical calculations method, the computational model created by a Computational Fluid Dynamics (CFD) software could reduce a lot of trial and error on experimental work. In this paper utilizing the ANSYS FLUENT 19.1 software to make crate the combustion model. The ratio of air to fuel mixture, the equivalency factor, mass flow rate of the mixture, velocity, mass fractions of the mixture components (fuel and air) and their temperatures will serve as the input parameter while the exhaust gase component mass fraction, temperature, mass flow and velocity will be monitored.
-
Optimizing the combustion processes of a small scale solid fuel-fired boiler
358-369Views:144Over the last decade, the public has been paying increasing attention to reducing greenhouse gas and acid rain emissions and reducing particulate matter, which is extremely harmful to health and the environment. To improve air quality, the European Commission has achieved a range of measures to reduce air pollutant emissions in the transport, heat and electricity, industrial and agricultural sectors. In Hungary, the amount of gas and solid air pollutants from solid fuel combustion used by the public during the heating season represents a significant percentage of the total amount present in the atmosphere. In 2016, taking into the total emission, the 29% of CO2 emissions; 85% of CO emissions; 75% of the particulate matter emissions and 21% of the NOx emissions were derived from households. It follows that the improvement of air quality can also be achieved by controlling the emissions of solid fuel combustion plants. During our research we aimed to optimize the operation of a newly purchased TOTYA S18 boiler and a pilot pellet boiler. Operating the boilers in the correct mode minimizes air pollutant emissions, and the greater part of the heat generated is actually turns to heating the home, as with poor settings, a lot of heat leaves through the chimney. The data obtained during the tests can also be used to determine whether the boilers comply with the emission values set out in Commission Regulation (EU) 2015/1185.
-
The Impact of Electrical Vehicles on Sustainability: Jordan as a Case Study
393-403Views:217The Global concern is moving toward making a revolution in favor of exploitation of renewable energy in order to improve environment conditions, limit emissions and minimizes consumption of non-renewable resources within the planet. In this context, it is necessary to focus on the transport sector as it contributes of at least 30% of the total primary energy consumption. Therefore, a set of rules must be developed to maintain economic, environmental and social sustainability to address the problems so as not to increase their severity and these cannot be done unless there are joint measures and regulations from governments, companies, manufacturers and users. Unfortunately, the Jordanian transport system mostly depend on the individual transport which supported by cars, and that because of the weak role played by the public transport sector, especially at the capital, Amman. Buying hybrid cars (internal combustion engine + electric motor) and Electrical Vehicles (EV), in the past few years in Jordan is increasing, which is compatible with the global trend to use Electrical Vehicles (EV) instead of Internal Combustion Engine vehicles (ICE) powered by fossil fuels, this issue will have a direct and indirect impact on gas stations companies, also it will have direct impact on labor sector and the current car industry since electric charging stations as well as EV manufacturing is not labor intensive. The main purpose of the study is to show how much it is necessary now to start theoretical assumptions through studying the expected annual increase in passenger cars and its impact on sustainability and predicting the future fuel consumption and emissions and compare them with the base situation.
-
Combustors with Low Emission Levels for Aero Gas Turbine Engines
503-514Views:411The aircrafts are responsible for emitting several types of pollutants, especially the pollutants in the form of NOX, CO2, CO, UHC, SOX and Particulate Matter PM (smoke/soot). The impact of aviation emissions on the global is well known, where these emissions modify the chemical and microphysical properties of the atmosphere resulting in changes of earth’s climate system, which can ultimate in critical changes in our planet fragile ecosystem, also the pollutants produced by aircraft engines cause many health problems. This is why the International Civil Aviation Organisation (ICAO) is seriously seeking to control the emission levels by issuing new standards during the successive meetings of the Committee on Aviation Environmental Protection CAEP (CAEP/01 in 1986, CAEP/2, CAEP/4, CAEP/6, CAEP/8, etc). The new regulations include more stringent standards aimed to reduce emission levels, this led to increased interest in low emission technologies. In this paper, a comprehensive review of low emissions combustion technologies for modern aero gas turbines is represented. The current low emission technologies include the high Technologies Readiness Level (TRL) including RQL, TAPS, DAC and LDI. Also, there are advanced technologies at lower TRL including LPP, ASC and VGC.
-
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
310-324Views:343The crankshaft of today’s internal combustion engines with high performance output are exposed to harmful torsional oscillations originated from the unbalanced gas and inertial forces. To avoid the fatigue damage of engine components, caused by the undesired vibrations, torsional vibration dampers can be applied. Viscodampers are one type of the torsional vibration dampers, which operational fluid is silicone oil. For cost-effective R&D activities and production, finite element and finite volume numerical discretization methods based calculation techniques must be involved into the engineering work supported by the modern computer technology. The aim of this paper is to provide an insight into the multidisciplinary design and development process of visco-dampers in vehicle industry applications. Four different examples as structural, fatigue, CFD analyses and structural optimization have been introduced in the present work. It turned out from the static structural and fatigue analyses, that the investigated damper has safety factor over the limit for both static structural and fatigue analyses, so it is suitable for the given load conditions. In the structural optimization process 34.36% mass reduction has been achieved. According to the coupled fluid dynamic and heat transfer simulations a rather stagnating air zone evolved between the engine and the damper during the operation, which can cause efficiency reduction of cooling fins mounted onto the housing. In light of the numerical results, the suitable damper position has been determined for the highest heat transfer.
-
Investigation of the Resistance Force Acting on a Sailing Craft in the Case of a Change of Draft Caused by a Change of Powertrain Using Numerical CFD Simulations
30-35Views:229Nowdays In the case of recreational craft, interfering with motor drive solutions is a common workflow due to increasingly strict rules for environmental reasons. When switching from an internal combustion engine to an electric engine, the change in draft varies from boat to boat, but it can be said in all cases that as the mass changes, so does the draft. Because of this, the magnitude of the resistance force acting on the ship also varies. In this paper, we examine, through a specific example, the benefits of a change in dive caused by weight gain at different travel speeds.
-
Review of Drive Systems Applied in Modern Vehicles
728-732Views:198In this publication we review the drive systems of modern electric and hybrid vehicles. We also discuss the various types of electric motors, batteries, as well as fuel cell systems applied in them. Furthermore, as an important part of hybrid vehicles is the internal combustion engine, we review the literature about the methods used to.
-
Global and Domestic Status and Prospects of Green Biomass Utilization
85-105Views:160Nowadays, the energy consumption of global population is depending on fossil fuels, but the role of renewable energies has been increasing rapidly, primarily due to the depletion of fossil fuels, the appreciation of environmental problems and climate policies. Biomass is the fourth most important energy resource in the world, provided an estimated 70% of global renewable energy supply. However, the annual growth rate of biomass is lagging behind modern renewable energy sources. The type of biomass is very diverse and can be processed and utilised by different methods. Currently, in the "green chemistry" industry (the replacement of petroleum-based, synthetic chemical raw materials with bio-based compounds from plant biomass), the importance of combustion, pyrolysis, biogas, bioethanol, biodiesel and basic chemical compounds production have been increasing. The objectives of the present research is to analyse the global and domestic status of renewable energies and biomass production, furthermore the possibilities of utilization of perennial, herbaceous biomass plant, the giant reed (Arundo donax L.), with which has been conducting research for numerous years at the University of Debrecen.
-
Review of Modern Vehicle Powertrains and Their Modelling and Simulation in MATLAB/Simulink
232-250Views:1096Thanks to technological advances and environmental standards, as well as changing usage patterns, road vehicles are constantly developing. Electric and hybrid vehicles are playing an increasingly important role in today’s road transport. The most significant changes are probably in the powertrain of vehicles. The efficiency of internal combustion engines increases while their emissions continue to decline. In addition, high performance electric motors, batteries and even fuel cells play an increasingly important role in hybrid and electric vehicles. In this publication, we review the drive systems of current modern vehicles and the types and characteristics of their major components. We also review the available models and computer programs for their simulation, focusing mainly on MATLAB/Simulink applications. Based on this, we can develop our own models and simulation programs which will help us to perform different driving dynamics simulations and to compare the performance, dynamic and energetic characteristics of these powertrains and their components to each other.
