Search
Search Results
-
Future Power Plant Portfolio Analysis from the Point of View of Minimum Cost and Emission Optimization
61-77Views:52The article examines the expected composition of the power plant portfolio in Hungary by 2030. The indicators considered are the life-cycle unit costs (LCOE) and the life-cycle specific carbon dioxide emissions (LCA(CO2)) of the power plant types. The minimum of these two indicators, as objective functions, is determined by a linear programming method for the power plant portfolio. The results show that the LCOE minimum for the power plant portfolios in 2030 is worse in absolute terms and better in specific terms than in 2021. In both absolute and specific terms, the LCA(CO2) minimum is more favourable in 2021. These results are met under the thirty and twenty-five percent electricity import scenarios. With twenty percent imports, the absolute values are worse and the specific values are better for both indicators. On the other hand, the results of the calculations for 2030 fall short of the 2030 Agenda of the Institute for a Green Transition. This is due to the delay in commissioning a new nuclear power plant and the transformation of industry with increasing electricity demand. For the portfolios under review, a minimum of thirty percent of domestic generation from renewable sources is met. This contributes significantly to the European Union's ambition for the sector to be net greenhouse gas-free by 2050.
-
The Role of Small-Scale Household Power Plants in the Electricity Supply by the Hungarian Settlements
355-372Views:135The utilization of renewable energy sources spread with stormy speed on the world therefore more and more municipalities propose that they satisfy their energy demand from renewable sources. The fossil fuels represent a significant proportion in Hungarian energy balance and the majority of these is import energy. The proportion of renewable energy sources must be increased to decrease the energy dependence and the energy cost of municipalities, to increase the energy security and to consider the aspects of environment.The interest of Hungary is to increase the proportion of renewable energy sources in energy supply. In order to this, the government created the small-scale household power plant (SSHPP) category in the Electricity law. This power plants should be not greater than 50 kW's performance. In this category, electricity can be produced from renewable and fossil sources. Since the government introduced the small, household size power plant category the installed capacity was grown quickly in the last seven years. The general capacity was 0.51 MW altogether at the end of year 2008 but it has already approached 129 MW’s at the end of year 2015. The general capacity was increased by the multiple of the previous year every year between 2008 and 2015 and there will be more a dynamic capacity expansion. Data about the capacity and the produced electricity can be displayed on municipality level, too. The purpose of the investigations is to determine: how can the built capacity of the small, household size power plant category participates in the electricity supply of the Hungarian settlements? So how many percentages of electricity demand can be gratified by this electricity power on the settlements? Based on this a ranking can be made among municipalities which shows the level of sufficiency in production of renewable energy and give a possibility for the power shift. Finally, to what extent can be built upon this power plant category in order to that Hungary can comply its objective value.
-
The impact of realization of solar power plant installation requests in Mandatory Purchase (KÁT) system on the electricity supply of Hungarian settlements
54-60Views:108The support system of renewable energy production was changed in Hungary in 2017. The legislator created the Mandatory Purchase (KÁT) system earlier to encourage the electricity production from renewable energy sources and waste. The Renewable Energy Subsidy System (Metár) changed the Mandatory Purchase (KÁT) system from the 1st of January in 2017. It had been known before Metár came into force that the supported period in the Matár would be only 13 years while it was 25 years in the KÁT. Therefore, a real rush started for the KÁT support licenses in 2016 in order to make more beneficial contracts by the investors. At the time, the Hungarian Energy and Public Utility Regulatory Authority (MEKH) released a record amount of licenses (more than 2000 pieces) to build solar power plants under 500 kW performance. This is more than 1000 MW total power. This paper searches the answer how this solar power plants will influence the level of self-sufficiency of the Hungarian settlements in the electricity supply if those are realized. Hereinafter, we will analyze the possible impact of these solar power plants in the settlement electricity self-sufficiency.
-
Utilisation and Quality Management of Power Plant Fly Ash
329-337Views:216Over the past decades, both the residential and industrial energy demand has increased due to the continuously growing consumption and production. As a large share of the electricity is still produced using fossil fuels, the utilisation of the by-products is a contemporary and pervasive issue. Fly ash is generated in large quantities in coal-fired power plants and has been proven to be an appropriate raw material for various industrial uses. Among others, it is applicable as an additive and lightweight aggregate in the cement and concrete industry, can be used for CO2 sequestration, glass foam production, catalyst production, or as a base material for geopolymers, as well. Geopolymers are inorganic polymers produced via the reaction between solid alumina and silica containing or alkali silicate materials in alkali media. Due to their numerous advantageous properties and wide variety of utilisation possibilities, research on fly ash base geopolymers became widespread topic. The quality of fly ash is determined by technical requirements, and the degree of quality control requirements depends on the final use. In certain fields of applications, standards and regulations have already been created to ensure the consistent quality of the final products made from fly ash, e.g. in the cement and concrete industry. There are various methods for fly ash processing, however, the methods to achieve the necessary properties are not standardised.
-
Numerical Model Analysis of Natural Gas Combustion Burners
67-71Views:159Traditional power plants still the dominating power source for all the major industries and powerdemanding facilities, the most crucial facility for the whole plant operations is the industrial boiler which generatessteam, heating energy or electrical power. Boilers generate energy by combustion. The improvement of combustion efficiency could greatly influence the energy consumption and will make the boiler more efficient and cleaner (less emissions), that’s why it is important to understand the combustion and thermal flow behaviours inside the boiler. Beside experimental testing, computational work nowadays becoming more and more important due to lower cost and acceptable accuracy with minimum error. With numerical calculations method, the computational model created by a Computational Fluid Dynamics (CFD) software could reduce a lot of trial and error on experimental work. In this paper utilizing the ANSYS FLUENT 19.1 software to make crate the combustion model. The ratio of air to fuel mixture, the equivalency factor, mass flow rate of the mixture, velocity, mass fractions of the mixture components (fuel and air) and their temperatures will serve as the input parameter while the exhaust gase component mass fraction, temperature, mass flow and velocity will be monitored.
