Search
Search Results
-
Evaluation Opportunities tor Recreational Sport Services – Adapted to Higher Education Environment
150-164Views:215In our study, we analyse various researches dealing with quality aspects of sport services, and different quality models related to the interpretation of quality. The results which were obtained in the framework of primary research activity present the opinions of students from five different research universities. Sport services’ operation and sustainability are determined by market regulations, as parts of the service industry. Considering that the university leisure sports services take place in a competitive environment, the universities often have to compete with external sports service providers for achieving confidence of the young generations. For the qualitative tests, we used the QSport-14 measurement scale, which is generally applied by sports centres. This scale investigates the sports services according to three different aspects: (1) instructors, (2) infrastructural facilities and equipment and (3) offered sport programs. We have adapted the measurement scale to the university environment because of the differences and special characteristics of external sports service providers and university sports services. In addition, we analysed the factors influencing recreational sports, and we also examined that what changes would be needed in order to improve the quality of recreational sport activities in higher education.
-
The Efficiency of Intellectual Capital as a Crucial Factor of Innovation
419-428Views:250In today's global economy, there is a substantial shift from manufacturing to services, which challenges both economic policymakers, business stakeholders, owners, suppliers, competitors, and ordinary people: restructuring will encourage all economic players to learn how to adapt to new trends. That is why our research focuses on innovation and the ability of companies to create value. The IT sector is currently one of the fastest-growing and most innovative sectors within the service industry. The success of IT companies is greatly determined by their ability, how to make effective use of their intangible assets at their disposal, including intellectual capital, which is defined as a non-financial asset. So the question may arise: how is it possible to quantify and in monetary terms the intellectual capital of the companies to be examined? That is why, we calculated for the most successful Hungarian IT companies the widely recognized index, the VAICTM index, for which domestic calculations are not yet available. Indeed, this indicator eliminates the lack of information stemming from reporting standards by the methodology relying on publicly available financial reporting data. The indicator itself is a top indicator whose two main sub-indicators quantify the effectiveness of intellectual capital and physical capital.
-
Implementing Lean Leadership in Garment Industries
348-354Views:339Garment industries are one of the most competitive industries nowadays, that was the main reason why implementing lean tools became conventional between big brands, although, lean tools alone are not enough for successful lean implementation in any organization, that’s why creating lean leaders and defining what lean leadership exactly means became a necessity, in this study, we will try to draw a path in which garment manufacturers can pursue to become lean organizations taking a (Manufacturer for NIKE) as an example for the study as a heavy lean implementer closing by suggesting a 9 steps method that lean can be implemented successfully in garment industry factory.
-
CSR Reporting Practices of Hungarian Banks
70-81Views:135The disclosure of information on the exercise of corporate social responsibility (CSR) is the tool most frequently used by companies to promote understanding of the social and environmental performance of an organisation and to improve relationships with stakeholders. For most of the world’s largest companies, reporting on non-financial information appears to be a continuing trend, so it is essential to present the new corporate reporting trends of the 21st century. The disclosure of socially responsible information will be analysed, with a focus on the application of the Global Reporting Initiative guidelines related to CSR. Global Reporting Initiative (GRI) is the best-known framework for voluntary reporting of environmental and social performance by business worldwide. The main objective of the paper is to explore the corporate voluntary disclosure practices of the listed and non-listed banks in Hungary. The extent of voluntary disclosure has significantly improved for decades worldwide, but the situation is not that obvious regarding the Hungarian financial sector. This paper aims to describe the status of disclosure practices of corporate sustainability in the annual reports, sustainability reports or CSR reports of the banking industry in Hungary. Also, increased corporate visibility and financial risk increase stakeholder demand for transparency on the social impact of financial institutions and their CSR practices. Finally, the analysis and subsequent comparison of available CSR reports of banks will be presented.
-
The Possible Job Creation and Job Destructive Effects of Technological Development
53-61Views:314Throughout history, technological change has often provided the basis for employee anxiety. Between 1811 and 1816, a group of workers in England who called themselves "Luddists" destroyed machines, because they thought it would endanger their workplace. 19th-century thinkers and economists such as Karl Marx and David Ricardo predicted that mechanizing the economy would ultimately worsen workers' conditions, depriving them of a decent wage. Over the last century, John M. Keynes (1930s) and Wassily Leontief (1950s) have expressed their fears that more and more workers will be replaced by machine solutions that will lead to unemployment. In recent years, Brynjolfsson and McAfee (2014) have argued that existing technologies reduce the demand for labor and put some of the human workforce at a permanent disadvantage. However, there are a number of compensation mechanisms that can offset the initial displacement effects of automation and process innovation in general (Vivarelli, 2015). First of all, while workers are being replaced in industries that introduce new machine technology, additional workers in new industries are needed. Second, automation (and process innovation in general) reduces average costs. Acemoglu and Restrepo (2017) found that this results, on the one hand, in the effect of price productivity (“priceproductivity”) (as production costs decrease, the industry can expand and increase labor demand); and, on the other hand, it leads to economies of scale in production (the reduction in costs due to automation leads to an increase in total output and increases the demand for labor in all industries). Similarly, Vivarelli (2015) argues that lower average costs can result in lower prices (if the industry's market structure is perfectly competitive), stimulate product demand, or result in extra profits (if the industry's structure is not perfectly competitive). If these extra profits are reinvested in the company, this investment can create new jobs. The presentation intends to present these counterbalancing cases and to provide real examples based on the literature.
-
Design and Implementation of BHN Testing Equipment To Measure Remaining Stress Of Wheelset Parts (Tie Rod and Stabilizer Bar)
337-341Views:182Nowadays in the automotive industry both production and service, requires accurate lifetime calculations. Today we have big amount of theoretical background and nowadays the importancy of technical and industrial databases become more and more important. By materials scientific and fracture mechanics aspects are well covered, but the remaining stresses which are present in every step of production, we can not clearly identify the origin of them. There are different paralell methods to mesure them, but the application of different methods are depending on the engineers, and their expreiences at the company. This part of the analysis is not standardised yet, so there are differences even in the same company.
-
Use of IoT Tools to Support the Decision-making Process
125-141Views:225Nowadays sensor networks and other systems, based on the IoT concept demonstrate the benefits of their usage, which includes the support of the decision-making process, therefore achieving an optimal result in the context of more and more fields. In this experiment, an additional sensor network has been developed based on a modular system derived from a previous development by means of a target-specific modification of the required modules to measure environmental data in a drying chamber used in food industry. The main objectives include the development of the device, the verification of the measurements of the factory-built device, providing an interface, which is able access the measurement data and after gathering experience from the usage, further developing the system and extending the functionality of the web application. The built-in data acquisition and control system stores the data of the measurements in the form of text files, while our additional data acquisition and control system uses a unified measurement database to store the data. According to the structure, a task-specific application has been developed in order to unify the two sources. Analysis of collected data was performed after running the ETL (extract, transform, load) algorithm converting the transaction-oriented database. The experiment shows so far the benefits of the multi-point measurements by a significant difference between the measured values, so we certainly consider further developments.
-
HAZ Characterization of Automotive DP Steels by Physical Simulation
478-487Views:174DP steels were extensively used in the vehicles industry due to its extraordinary combined properties of strength, ductility, formability and weldability which contributed great significance in reducing strength to weight ratio and CO2 emission. High strength steel i.e. DP steels (3 different grades) were experimentally investigated and thermophysically simulated using Gleeble 3500 simulator to determine softening and hardening in heat affected zone. Samples were heated to different peak temperatures (1350 °C, 950 °C, 775 °C and 650 °C), two cooling time (t8.5/5 = 5 s and 30 s) and Rykalin 2D model were selected. The hardness and microstructure of the specimens were tested and analysed. For longer cooling time (t8.5/5= 30 s), we observed that softening occurs in all grade of investigated DP steels to all sub-regions. But for shorter cooling time i.e. t8.5/5= 5 s the softening is higher in intercritical HAZ compared to other sub-regions for all the types of DP steel with short cooling time (t8.5/5 = 5 s). However, the hardening zone in the CGHAZ occurs when Tmax is 1350 ºC for DP600, DP800 & DP1000 steels but it is more prominent in DP800 as compared to others two steel grade.
-
International Coffee Trade Network Analysis
393-404Views:256Coffee is one of the most consumed beverages in the world. It is the second largest traded commodity after petroleum. It is crucial for the economy and politics of many developing countries, as its cultivation, processing, trade, transportation and distribution create jobs for millions of people. The analysis of network connections and structures became popular in the field of sociology, whereby the term Social Network Analysis (SNA) is derived. The method is well suited for the complex examination and modelling of composite social structures. The social network is defined as a finite set of social actors and the relationships between them. Modelling of complex networks now apply in countless locations, from social media through the pharmaceutical industry to economic and commercial processes. Our study examines changes in international coffee trade through a network analysis. Introducing the complex networks investigate by our, highlighting major changes in international coffee trade.
-
Sectoral Analysis of Hungarian Professional Football Clubs - Hungarian Football Money League 2014-2016
284-296Views:704Based on the model of the Deloitte Football Money League we recreated the „Hungarian Football Money League”, which gathers and analyses the most economically powerful Hungarian football enterprises. The model gave us an oppurtunity to analyse and compare the industry to the international level. With the hungarian professional football-enterprises we assume, the most economically powerful teams play in the NB. I. (National Championship). Because of this reason we only analysed NB 1. club teams. From the 12 participating team we selected only those 9 who stayed in the League for three consecutive years. The implications from this study is that the hungarian club teams stays well below the international level, altought top level enterprises' joint economical impact is indeed significant in the hungarian sportsector.
-
Present and Future of Industrial Robotisation
1-12Views:83The following paper analyzing the installation of industrial robotisation in sectors and regions, in addition carry out forcastings on historical data. In recent years, automation and the use of industrial robotics have increased exponentially in the manufacturing sector. Given that companies prioritize enhanced production efficiency, quality assurance, and safety, it is evident that substantial investment and implementation of automation continue to occur in manufacturing facilities worldwide. The number of industrial robots globally has been growing steadily since 2010. However, the rate of growth has slowed from 2020 onwards. The impact of the Covid-19 epidemic was still felt in 2020, but the deployment of industrial robots increased significantly in 2021. Global industrial robot deployment is projected to continue to grow in the coming years, although the rate of increase may vary between regions and countries. The analysis showed a number of differences between regions in the number and growth rate of industrial robot deployments. Asia and Australia are the largest markets for robots and the number of robots deployed is expected to continue to grow in the future. Europe is the second largest market and, although growing at a slower rate, industrial robot deployment is also increasing steadily. In the Americas, growth is slower than in other regions, but still increasing. Global growth trends suggest that there will be further growth in the coming years and that the deployment of industrial robots will become more widespread in different parts of the world.
-
Effect of nanomaterials on work safety
304-312Views:107Nowadays, due to their special properties, nanomaterials are gaining more and more interest and their industrial application is increasing. Their specific properties are mainly due to the fact that the main characteristics of nanomaterials are not always the same as the normal size range of the same material. While these materials fulfill an important new function in the industry, their interactions with the environment and biological organisms are becoming increasingly unpredictable, increasing uncertainty, for example, in their application to human safety. Due to the very rapid technological development, these substances have been used much earlier than the legal framework for their application could have developed, and therefore a binding regulation on the use of nanomaterials is currently not available. At this moment, the manufacturer of the nanomaterial is responsible for the safety of the products. Of course, owever, chemical safety legislation and standards provide an excellent basis for their management, but due to their specific properties, novelty and lack of knowledge of the mechanism of action, risk assessment can still be a challenge for the practitioner.
-
Simulation of an Operating Machine in Dust Chamber
266-275Views:97Auxiliary equipment used in the automotive industry, such as generator, air conditioner, or starter, is often exposed to harsh conditions, for example splash water, frost, or serious dust load. Therefore, these auxiliary devices are intended to be prepared by the manufacturers to these conditions. The topic of this paper is a part of the analysis of the dust control of generators, which in principle is no different from the examination of other equipment. The flow around the generator and in the dust chamber was simulated by Ansys FLUENT.
-
Comperative Economic Analysis of the Determining Leagues of European Clubfootball
22-35Views:472Nowadays sport is not just all about entertainment, or about social cohesion but also it has serious economic and business aspects. Sporteconimics is an individual concept and sector. Sport businesses are contributing more and more to national incomes. Football business are specially important parts of this complex system called sporteconomics. The aim of my research is to create an economic and also comparative analysis of the five top European football leagues, also called as the “Big5” which are responsible for 74% of the total football revenue in Europe. By the analysis of the 2019 UEFA report it can be stated that in these leagues more than 60% of the competing clubs achieved positive operating profits, but the structure of their revenues warns them to look for opportunities to increase their operating revenues. According to the data it is clear that wage cost is the most significant cost element in the industry as they cover 53-68% of their total revenue. These statements set the course for the economic development of European football. The management of these outstanding football clubs may give example to the ones falling behind including Hungarian football businesses.
-
Formation of Oxide Layers with Femtosecond Laser on Steel Surfaces for Color Marking
174-178Views:207With the appearance of ultrashort pulse lasers, the researchers have begun working on various laser marking technology. Atmospheric heating and ablation of a surface induce laser coloration of metal surfaces. However, their application is still problematic today in the industry. With the appearance of femtosecond pulse lasers, a new concept became available for color marking. This concept is based on the formation of laser-induced periodic surface structures (LIPSS) on metal surfaces. The purpose of this article is to summarize the literature of laser color marking with ultrashort pulse lasers.
-
Global and Domestic Status and Prospects of Green Biomass Utilization
85-105Views:149Nowadays, the energy consumption of global population is depending on fossil fuels, but the role of renewable energies has been increasing rapidly, primarily due to the depletion of fossil fuels, the appreciation of environmental problems and climate policies. Biomass is the fourth most important energy resource in the world, provided an estimated 70% of global renewable energy supply. However, the annual growth rate of biomass is lagging behind modern renewable energy sources. The type of biomass is very diverse and can be processed and utilised by different methods. Currently, in the "green chemistry" industry (the replacement of petroleum-based, synthetic chemical raw materials with bio-based compounds from plant biomass), the importance of combustion, pyrolysis, biogas, bioethanol, biodiesel and basic chemical compounds production have been increasing. The objectives of the present research is to analyse the global and domestic status of renewable energies and biomass production, furthermore the possibilities of utilization of perennial, herbaceous biomass plant, the giant reed (Arundo donax L.), with which has been conducting research for numerous years at the University of Debrecen.
-
Examining Used and Sportswear Supply Chain Strategy and Indicators
86-98Views:224The following study presents the supply chain strategy of a second-hand and sportswear company in Hungary. The study discusses the main tasks of supply logistics, the level of logistics service, the main determining elements of the level of logistics service, and the measurement of customer satisfaction. From the first step of the process, we can fully follow the processes until the last activity. We can learn in detail about the sub-processes, such as: types of clothing collection, sourcing, warehousing, selection, disassembly, processing, receipt of goods and sales. The aim of the study is to make the processes more transparent for everyone.
-
A Selective Study: Camels Analysis of Indian Private Sector Banks
277-283Views:147Banking sector is one of the fastest growing sectors in India. Today’s banking sector becoming more complex. Evaluating Indian banking sector is not an easy task. There are so many factors, which need to be taken care while differentiating good banks from bad ones. Performance evaluation of the banking sector is an effective measure and indicator to check the soundness of economic activities of an economy. The contribution of RBI and other policy maker, the banking industry has witnessed regulatory requirements like BASEL III norms. These regulatory changes have influenced prominent improvement in efficiency and performance of the Indian Scheduled Commercial Banks in the past few years. In the present study an attempt was made to evaluate the performance & financial soundness of select Private Sector Banks like ICICI,HDFC AND YES bank using CAMEL approach from 2013 to 2017 as well one way anova method. It is observed that on an average ICICI was at the top most position. It is also observed that yes Bank was at the bottom most position in selected CAMEL ratios.
-
Price Analysis Practices in the Pig Sector
1-12Views:72The analysis of sales prices has become a particularly important topic in pig production research, including statistical analysis. With globalisation, we can say that today we are talking about a sector constantly exposed to the effects of the world market. It is also worth pointing out that, compared with other sectors, the impact of external regulation and influence is less pronounced. Thus, the aim of the present research was to identify the journal articles published on the subject of price analysis and, on the basis of these, to establish the correlation with the methodologies often used. It examines the spatial location of price analysis. The results obtained show that the practice of price analysis is mainly carried out in the context of market leading countries, usually on the basis of a cross product chain issue. The research shows the emergence in recent years of increasingly sophisticated methodologies that allow more accurate conclusions to be drawn, while also facilitating planning from a practical point of view.
-
Application of drones in solving EHS tasks
296-303Views:208Drones or unmanned aerial vehicles (UAVs) or unmanned aerial systems (UAS) are unmanned aerial vehicles without pilot and passenger on board. These tools have been used primarily in the military, but have now grown significantly in applications including industrial use, services, disaster management, and the civilian sector. We briefly introduce the most important classification criteria for drones. In addition, in this study, we have collected the uses that the industry and the EHS sector can or will use in the future. We mention the most important drone-mounted and mountable accessories that can be used by users for their specific tasks.
-
Measurement of Friction Losses of Electro-Pneumatical Valves with Industrial Devices
68-72Views:86The pneumatic devices are frequently used in several fields of the industry but the losses and pressure
drops of the pneumatic system are not really investigated. These losses can cause great property damages during long uptime because the compressed air is a quite expensive energy source. I designed a measuring system which is able to measure the friction losses of electro-pneumatic 5/2-way valves (monostable and bistable too). It is possible to choose between manual and automatic operation modes as well. In the automatic mode the system makes measurements in three different user-defined pressure levels. In the manual mode the measuring pressure can be set between 2-6 bars. An automatic evaluate program is also an important part of the created system. It gives the possibility of the fast evaluation of the saved data and it could be the base of a fast report generating application. -
The Possibilities of Additive Manufacturing in Medical Use
246-253Views:105Additive Manufacturing has been invented in 1981 at the University of Texas, and to this day it has grown to be the most versatile and promising manufacturing technology in the market, both the industry and health care system has noticed this. Additive Bio-Manufacturing (ABM) techniques, which can be used in health care, are highly in demand, and researches have been going on to make these technologies safer and even more versatile. For more utilization and versatility, special attention is required to develop new materials which can help in increasing the service life, bioactivity, cell growth along with the desired mechanical properties, and to find the right manufacturing parameters for creating optimal products. The aim of this review is to present the available main Additive Manufacturing technologies, and particularly the biomedical usability of Additive Manufacturing.
-
Investigation on Double Oxide Film Initiated Pore Formation in Aluminum Casting Alloys
141-153Views:339The most common, and in fact, the most deleterious defects of aluminum casting alloys are the so-called double oxide films or bifilms, which have a central role in porosity formation, as they can easily unfurl and inflate into pores during the solidification of the alloys. Sr addition is generally used in the foundry industry for the modification of the eutectic Si phase of hypoeutectic Al-Si alloys. However, Sr microalloying usually leads to an increased pore formation tendency. As bifilms are preferred sites for pore formation, it should be expected that Sr additions have a significant effect on the number and/or the structure of double oxide films present in the melt. In this work, the relationship between Sr-concentration and the susceptibility to pore formation has been investigated through the evaluation of melt quality of melts which had different levels of Sr. The bifilm content of the melts was investigated by the analysis of K-mold specimens and X-ray computed tomography (CT) of reduced pressure test (RPT) samples. It was found that liquid alloys with a higher Sr concentration had a significantly greater tendency to pore formation, which can be explained by the presence of a larger number of bifilm defects in the liquid alloy.
-
Maintenance Strategies and Life Cycle Costs of Renewable Energy Systems
106-116Views:123Life cycle costs are important factors in decisions on renewable energy investments. Since maintenance costs generally constitute a high portion of the life cycle costs, the maintenance strategy applied in a project can affect the bottom line significantly. The effective maintenance tools used in the production industry (e.g., diagnostics, condition monitoring, data management, integrated information systems, machine learning, and automated decision making) can be involved in planning and maintenance of renewable energy systems to gain the benefits of these approaches. In this paper the effects of maintenance strategies on life cycle costs are investigated and the benefits of up-to-date condition monitoring techniques are presented through case studies.
-
Improvement of High Strength Automotive Steels Wettability Properties Using CO2 Laser Surface Treatment
422-427Views:157As a result of stricter environmental and safety standards, vehicle manufacturers have to reduce the weight of the vehicles, because 10% weight loss cause 8-10% reduction of fuel consumption. To reduce car’s weight and increase safety, vehicle manufacturers use high-strength steels. Further weight reduction can be achieved by using corresponding bonding technology (soldering, sticking) and optimizing these technologies can increase the strength of the joints. According to literature research, the improvement of interface properties has a large effect on bonding technologies. In order to improve interface properties, we can use multiple surface treatments. In our research we investigate the effects of CO2 laser surface treatment on high strength steels, because CO2 lasers are often used in the vehicle industry. In order to detect the effect of surface treatment, we investigate the wettability of the treated and untreated steels. In our research we measure the surface tension of treated and untreated steels. Our main goal is to improve wettability properties thus the bonding technology. In our research we used DP 600 high strength steel sheet with the thickness of 1 mm. We cut the steel sheet to 25mm wide and 55mm long workpieces. Before the surface treatment, the workpieces had to be cleaned and degreased using methanol. We searched for parameters that do not cause any visible changes on the surfaces. Among the parameters of the treatment we were able to change the output power of the laser. We used contact angle measurement to examine the wettability.
