Search
Search Results
-
Safe, Health Working in Health Care in the Shadow of a Pandemic
85-97Views:212Safe work that does not endanger health is a complex category, the provision of which creates an obligation on the part of the state, the employer and the employee. The task of the state is to determine the basic requirements for work that does not endanger health and safe, as well as the related rights and obligations, and to develop a national policy on occupational safety and health. As a result of the coronavirus epidemic in early 2020, we have faced a whole new form of accidents at work and occupational diseases. In my study, I want to examine the course of the investigation of the infection that takes place during the pandemic in healthcare work, and the possibilities of remuneration for the duration of the illness.
-
Effect of nanomaterials on work safety
304-312Views:96Nowadays, due to their special properties, nanomaterials are gaining more and more interest and their industrial application is increasing. Their specific properties are mainly due to the fact that the main characteristics of nanomaterials are not always the same as the normal size range of the same material. While these materials fulfill an important new function in the industry, their interactions with the environment and biological organisms are becoming increasingly unpredictable, increasing uncertainty, for example, in their application to human safety. Due to the very rapid technological development, these substances have been used much earlier than the legal framework for their application could have developed, and therefore a binding regulation on the use of nanomaterials is currently not available. At this moment, the manufacturer of the nanomaterial is responsible for the safety of the products. Of course, owever, chemical safety legislation and standards provide an excellent basis for their management, but due to their specific properties, novelty and lack of knowledge of the mechanism of action, risk assessment can still be a challenge for the practitioner.
-
Maintenance from the Work Safety Point of View
190-196Views:107Deterioration of the technical condition of plant equipment is a common phenomenon nowadays. According to the experience of authorities, all this contributes to the occurrence of malfunctions and accidents. Plants that operate with an inadequate conservation strategy are now nearing the end of their design life, thus posing an increased accident risk. Aging processes are often accelerated by the operator's underestimation of the effects of equipment stress and the extent of deterioration mechanisms, and the consequent inadequate design and operation of condition monitoring and maintenance procedures. The aim of our work is to examine trends in the light of modern maintenance optimization methods and, in connection with this, to make proposals for the optimization of maintenance scheduling for employers.
-
Improving Safety & Ride Comfort through Dual Suspension System in Road Vehicles
30-36Views:148The essential objective of the proposed suspension framework is to limit the undesired disturbance of a vehicle because of uneven surfaces on streets. This framework in vehicles is comprise of some fundamental components like dampers and springs which ingests the stuns that are instigated by unusual streets. In any case, these frameworks can just work up to a predefined constrain. Vehicle suspension frameworks are planned by taking the solace capacity of a traveler in record and to enhance the street grasp on each surface.
This examination proposes an idea for structuring a superior suspension arrangement of vehicles to upgrade the nature of the drive without corrupting the dependability of the vehicle plan. In this exploration, a mix of two suspension framework is presented in which one goes about as an essential suspension while different fills in as an optional framework that can adequately lessen the vibrations. This mix upgrades the customary framework that is right now introduced in vehicles without bargaining on solace and street hold.
-
Challenges of the Quality- and Change Management in the Context of Upcoming Social-Industrial Changes (5.0) – Conclusion of a Survey
138-150Views:142The upcoming industrial-social revolution, which may be called the 5.0, is emphasizing the coordination of the value-creating work of technology (machine) and man. This approach wishes to move towards sustainability, which deserves a significant role in nowadays through the world empathizing the negative effects of the wolrd. During my research I was looking for the answer that how the extended industry 4.0 and its tone be in Hungary via supply chain of the automotive industry. During my research I was looking for the answer that how the extended industry 4.0 be in Hungary and its tune through supply chain of the automotive industry. I also have examined that which changes are justified regarding management systems in interest of efficiency and emphasizing the human capital by leaders interviewed. As a part of qualitative research in-depth expert interviews were interpreted with help of content analysis based on the methodology of grounded theory. The results demonstrate the need to review and change existing processes in order to ensure that the potential of human capital is not lost and that technological development, even more so, is at the service of human resources in order to achieve its efficiency and effectiveness. Among the possible tools we can find the re-structurizing changes of post tracking processes of the audits in management systems providing quality. Furthermore, the practical implementation of multifactorial statistical process control in the evaluation of processed data, which may be one of the essences of industrial (IoT) data.
-
Diagnostic Model for Supporting the Development of Health-conscious Organizational Behavior
1-18Views:313In the 21st century more and more countries of the world take the attitude that human health is not just an issue for healthcare services but for all major areas of life. Such an area for employees is the workplace. Protection of employee health and safety has for a long time been a non-transferable (objective) obligation and responsibility for employers in Europe. Connections between health and the workplace have however extended far beyond the traditional aspect of safety and health at work. Developing a health-conscious organisational behaviour means a challenge for many Hungarian companies; the model described in this study assists them in both diagnosing their current situation and choosing the appropriate course, method and tools for development.
-
The Effects of Quenching and Tempering Treatment on the Hardness and Microstructures of a Cold Work Steel
286-294Views:199The X153CrMoV12 ledeburitic chromium steel characteristically has high abrasive wear resistance, due to their high carbon and high chromium contents with a large volume of carbides in the microstructure. This steel quality has high compression strength, excellent deep hardenability and toughness properties, dimensional stability during heat treatment, high resistance to softening at elevated temperatures. The higher hardness of cryogenic treated samples in comparison with conventional quenched samples mean lower quantity of retained austenite as at samples quenched to room temperature and tempered in similar condition. In the microstructure of samples were observed that the primary carbide did not dissolve at 1070°C and their net structure have not been changed during to heat treatment. During to tempering at high temperature the primary carbides have become more and more rounded. After low tempering temperature in martensite were observed some small rounded carbides also, increasing the tempering temperature the quantity of finely dispersed carbides increased, which result higher hardness. The important issues in heat treatment of this steels are the reduction or elimination of retained austenite due to cryogenic treatment.
-
What is worth knowing about the establishment from a work safety point of view
24-31Views:109Under establishment, we mean the process that results in the creation of a new unit (eg factory, plant, office, etc.), a workplace or an existing one what will be renewed, expanded or restructured, or installed; installed on a machine, plant, appliance, whether or not for productive or non-productive purposes. It is generally true that the design, construction, use and subsequent operation of workplaces, facilities, technology, materials, energy, personal protective equipment; production, distribution, import, transportation, movement, use and use of workplaces; in the absence of these, the requirements of the scientific-technical standard can be expected. An employer, operator, and service provider must adapt to market conditions. Accordingly, it should monitor the expectations of customers, business partners, market changes, trends to adapt to expectations, and therefore constantly develop their products, services, produce reliable quality, ensure that quality meets the market expectations providing personal and material conditions to ensure that employees can effectively and safely meet market expectations. The recognized business perception of the employer is to accomplish the above, the objectives to be achieved must be formulated, priority should be given to the potential risks (with particular regard to occupational safety risks) to be measured, measures to be taken to ensure effectiveness, short-, medium- and long-term planning, investment.
-
Designing Aspects and Classification of Bearing Industry Box Handling Apparatus
325-334Views:91It has been an accepted tendency in the industrial practice since the last third of the 20th Century to decrease the living labour demand of the manufacturing processes. One of the main tools of it is the automation of production. In the design, the construction and the programming of the developed automata, the results of electronics, informatics and mechatronics can be used. All of the scientific fields mentioned above undergo intensive development. By the application of the results achieved in the design of the applications, the monotonous, dangerous and tiresome work not requiring expertise can be assigned to machines. In the longer run, the application of the automata is beneficial also in financial aspect, since the costs of living labour are continuously growing, while that of the mechatronic and technological devices show a rather decreasing tendency. Reliability is also an important aspect. It is well known for everyone that a well-designed and programmed automatic device performs its task without mistakes. If there is any objection or breakdown, on the basis of the currently valid safety technology rules, the machine stops, does not trigger any damage and after its repair, work can be continued.
-
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
310-324Views:296The crankshaft of today’s internal combustion engines with high performance output are exposed to harmful torsional oscillations originated from the unbalanced gas and inertial forces. To avoid the fatigue damage of engine components, caused by the undesired vibrations, torsional vibration dampers can be applied. Viscodampers are one type of the torsional vibration dampers, which operational fluid is silicone oil. For cost-effective R&D activities and production, finite element and finite volume numerical discretization methods based calculation techniques must be involved into the engineering work supported by the modern computer technology. The aim of this paper is to provide an insight into the multidisciplinary design and development process of visco-dampers in vehicle industry applications. Four different examples as structural, fatigue, CFD analyses and structural optimization have been introduced in the present work. It turned out from the static structural and fatigue analyses, that the investigated damper has safety factor over the limit for both static structural and fatigue analyses, so it is suitable for the given load conditions. In the structural optimization process 34.36% mass reduction has been achieved. According to the coupled fluid dynamic and heat transfer simulations a rather stagnating air zone evolved between the engine and the damper during the operation, which can cause efficiency reduction of cooling fins mounted onto the housing. In light of the numerical results, the suitable damper position has been determined for the highest heat transfer.
-
Maintenance of Electric and Hybrid Vehicles
37-46Views:446An electric car is a vehicle powered by one or more electric engines, utilizing energy stored within batteries that are rechargeable. The first register of a usable electrical vehicle dates from 1880s. A hybrid vehicle incorporates two or more different power types, including, e.g., gasoline engines and electric motor. The goal in this work is to present the overall overview of the structure of the electric, hybrid and electric-hybrid vehicles, advantages and disadvantages of these types, the main points to focus when maintaining these and the challenges involved in its production and maintenance.
