Search
Search Results
-
Evaluation of the correlations between the normalized difference vegetation index (NDVI) and yield in a seasoning paprika (Capsicum annuum L. var. longum) stand
45-49Views:301The aim of our examination was to evaluate the correlations between the normalized difference vegetation index (NDVI) and yield, as well as to examine the possibility of yield estimation basedon NDVI in a seasoning paprika population.
Significant correlations were observed during the examination of the correlation between NDVI and yield. Furthermore, it was concluded that yield can be estimated with a 6.6–8.3% mean error based on the regression equations. No significant difference was shown between the error of estimations performed with various regression types and that of the estimations performed at various dates. For this reason, the identification of the optimum estimation method and the determination of the optimum date for estimation call for further examinations.
-
Stand evaluation, crop estimation and yield analysis of winter wheat for the optimization of yields
103-109Views:135The authors have been carrying out stand evaluation, crop estimation and yield analysis in winter wheat since 2012. The sampling areas were assigned at the fields of the Training Farm of the Faculty of Agricultural and Food Sciences of Széchenyi István University Mosonmagyaróvár according to the structure of the cropping system. According to their observations the value of field emergence is always lower than the laboratory germination. The weak emergence is important because the lower plant density cannot be compensated by the increased tillering in spite of having larger plant growth space. It is proven by the fact that they detected strong productive tillering even at 5 and 10 mm plant spacing while there were single-spiked plants at 40-50 mm plant spacing as well. The analysis revealed that the total ear mass and grain mass of wheat plants bearing two or more ears is almost the double than that of the single-spiked plants. It was a further basic experience that the largest ear of ”multiple-spiked” plants is always heavier than the single ear of one-spiked plants. Plants with intense tillering and more ears demonstrate the importance of proper seedbed preparation and drilling and the significance of sowing good quality seeds. These are the factors that determine field germination and emergence, influence the speed and intensity of initial development and by all these factors the sufficient productive tillering. The authors emphasize the use of exact and objective methods at crop estimation, e.g. the relationship between the ear mass and the yield which is in strong correlation whilst ear length and grain mass are not suitable for a precise estimation. The authors conclude that crop estimation and yield analysis must be inevitable tools of modern crop production and will be particularly important in precision agriculture. These tools also qualify the job done by farmers and helps to identify the areas that require special attention.
-
The Effect of Atmosperical Aridity on the Changes of Quantitative Parameters of Horticultural and Arable Crops
40-45Views:131The occurence of atmospherical drought causes serious water-supply problems in the most cases of our domestic agricultural plant species. This paper was studied, how can we quantificate the atmospherical drought, with the help of a low input (relative humidityof the air, temperature) index. If this index (LSZI) characterized the atmospherical drought well, it will suitable to estimate the yield amount of agricultural plants.
The index elaborated by the authors was tested on county average crop yield of 14 agricultural plant species. Moreover we compared the atmospherical drought index (LSZI) to other aridity parameters, how suitable for estimate the yield amount.
Result of experiments show that, the atmospherical drought index (LSZI) can be used well by several agricultural plant species in especially coern and sugar-beet to estimate yield amount. Excellent results were found by comparison to other aridity indexes, this means it is worth using in the aridity researches in the future. -
Investigation of combining ability and superiority percentages for yield and some related traits in yellow maize using line × tester analysis
5-14Views:251Combining ability estimation is an important genetic attribute for maize breeders in anticipating improvement in productivity via hybridization and selection. This research was carried out to investigate the genetic structure of the 27 F1 maize hybrids established from nine lines derived from Maize Research Department and three testers, to determine general combining ability (GCA), determine crosses showing specific combining ability (SCA) and superiority percentages for crosses. Nine lines, three testers, 27 F1 hybrids and two check commercial hybrids (SC162 and SC168) were studied in randomized complete block Design (RCBD) with three replications during 2016. The results of mean squares showed that significant and highly significant for most studied traits (days to 50% tasseling, days to 50% silking, plant and ear height, ear position, ear length, no. of kernels per row, 100-kernel weight and Grain yield). Estimates of variance due to GCA and SCA and their ratio revealed predominantly non-additive gene effects for all studied traits. Lines with the best GCA effects were: P2 (line 11) and P6 (line 21) for grain yield, for testers Gm174 and Gm1021 had significant GCA effects for grain yield. The hybrids P5×Gm1021, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1002 had significant and negative SCA effects for grain yield. Crosses P1×Gm174, P2×Gm1002, P5×Gm1021, P6×Gm174, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1021 were the best combinations manifested and significant superiority percentages over than check varieties (SC162 and SC168) for most studied traits. Therefore, these hybrids may be preferred for hybrid crop development.
Abbreviations: GCA general combining ability; SCA specific combining ability
-
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:226In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
56-61Views:151The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.
-
Upgrading breeding value estimation in beef cattle
451-458Views:239This paper gives a summary of the possibility for applying genomic information for breeding value estimation in beef cattle breeding. This process is called genomic prediction and is now widely used in dairy cattle globally as well as in some beef and sheep populations. The advantage of genomic prediction is a more accurate estimate of the genetic merit of an individual at a young age thereby facilitating greater annual genetic gain, predominantly through shorter generation intervals. Genomic predictions are more advantageous for sex-linked (e.g., milk yield), low heritability (e.g., fertility) and difficult-to-measure (e.g., feed intake) traits. The larger the reference population, on average, the more accurate the genomic predictions; additionally, the closer genetically the reference population is to the candidate population, the greater the accuracy of genomic predictions. Research is continuing on strategies to generate accurate genomic predictions using a reference population consisting of multiple breeds (and crossbred). Retrospective analysis of real-life data where genomic predictions have been operation for several years clearly shows a benefit of this technology.
-
Estimation of the vine-shoot yield in the Gyöngyös district
21-26Views:136Every year, a significant amount of vineyard prunings is generated in Hungary. Instead of utilization them, it is burned directly on the field in spite of the limitations of legalization highly pollute the environment in recent decades. The vineyard pruning itself or with other by-products from pomology and forestry can be significant amount of fuel source. However, before the planning to utilization the essential task is to estimate the potential. This study examine that how many vineyard is generated in the micro-region of Gyöngyös in every year on appointed vineyard.
In order to vine-branch potential calculate more accurate data was necessary so the products had to be determined for all plant. Thus, the biomass resource and the utilization become plannable. As the result of the experiment we can estimate that 1,5 t/ha vineyard pruning are generated. It means more than 9 thousand tons pruning in the micro-region of Gyöngyös. This amount can be convert into fuel source more than 150 thousand GJ heating value.
The results evince that the vineyard pruning is important fuel source in every year in the micro-region of Gyöngyös. Further usage is suggested for other regions in other size.
-
Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
131-136Views:215The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments. -
Investigation of genetic diversity in irradiated maize lines and its relation to hybrid performance
20-26Views:227Knowledge of genetic diversity among available parental lines is fundamental for successful hybrid maize breeding. The aims of this study were to estimate (1) genetic similarity (GS) and genetic distance (GD) (based on Jaccard index) in four maize inbreed lines; (2) to classify the lines according to their GD and GS; (3) to determine hybrid performance based on GD and heterosis for yield ability in 4x4 full diallel system. We used morphological description and AFLP (amplified fragment length polymorphisms) for estimation genetic polymorphism in four maize inbred lines. We estimated the applicability of genetic similarity in SC and reciproc hybrids for prediction of their performance.
Three primer combinations were used to obtain AFLP markers, producing 207 bands, 70 of whit were polimorphic. The dendogram based on genetic similarities (GS) and genetic distance (GD) and morphological description separated four inbred lines into well-defined groups. Morphological description just with AFLP analysis showed reliable results. In view of genetic distance, the UDL 1 line and their linear and reciprocal crosses showed significant heterosis effect, which was confirmed by heterosis calculation based on grain yield. -
Estimation of Inheritabilities from Holstein-Friesian Test Day Data in Hungary
23-25Views:176Recently, test day models (TDM) began to be increasingly used for the genetic evaluation of dairy cattle. The main advantage of the TDM compared with the 305 days lactation yield models is that more effects can be used in the evaluation. Therefore, the TDM is more accurate than the lactation models. The main disadvantage is the increased computational requirement, but this can be offset by improvements in computer capabilities.
The topic of this paper is the use of a fix regression test day model to estimate the inheritabilities of test day data from Hungarian Holstein-Friesian dairy cattle. The inheritability was 0.26 for milk production, 0.2 for fat production, 0.24 for protein production and 0.06 for the somatic cell count.