Search
Search Results
-
Improved soil and tomato quality by some biofertilizer products
93-105Views:283The use of microbial inoculums is a part of sustainable agricultural practices. Among various bioeffectors, the phosphorus-mobilizing bacteria are frequently used.
The objective of this study is to investigate the effect of some industrial biofertilizer inoculums, of containing P-mobilizing bacteria on the quantity and some quality parameters of tomato fruits. Spore-forming industrial Bacillus amyloliquefaciens FZB42 (Rhizovital) as single inoculums and combinations with other Bacillus strains (Biorex) were applied on Solanum lycopersicon Mill. var. Mobil test plant. Soil microbial counts, phosphorus availability, yield and fruit quality, such as total soluble solids (TSS) content and sugars (glucose, fructose) were assessed. The results found that single industrial inoculums of FZB42 product had positive effect on P-availability and fruit quality in the pots. Fruit quality parameters, TSS content, soluble sugars were significantly improved (p<0.05). Such better fruit taste was correlated significantly by the most probable number (MPN) microbial counts. Use of such bioeffector products is supported by the positive interrelation among measured soil characteristics and inside healthy quality parameters of tomato fruits.
-
Effect of plant growth promoting Rhizobacteria (PGPRS) on yield and quality of processing tomato under water deficiency
19-22Views:233Chlorophyll fluorescence was measured of H1015 tomato hybrid with different bacterial treatments (B0–B1–B2–B3) and three irrigation treatments: regular irrigated (RI), deficit irrigated (DI) and non-irrigated conditions (I0). The aim of the experiments was to show the effects of plant growth promoting rhizobacteria on the yield, dry matter and vitamin C content of processing tomato during different irrigation treatments, and measuring the chlorophyll fluorescence during the ripening and development stages. According to the results, none of the bacterial treatments had a statistical effect on the quantity and quality of the tomato and on the chlorophyll fluorescence, only the irrigation. Further studies are needed.
-
Rheological evaluation of industrial tomato
137-140Views:140Today, tomato has the second largest harvesting area globally, and the fourth largest in Hungary. The importance of industrial tomato is growing year by year, and one of the most important tasks is to satisfy the needs of the industry. To meet these needs, the producer has to find the proper genotype, which can achieve up to 100 t ha-1 crop yield. This quality has high importance to be researched.
The experiment was carried out in the Botanical and Exhibition Garden of the University of Debrecen, with 3 examined genotypes. The planting date was 3 of May 2018. The harvesting was two-threaded. On 27 of July the physical parameters – fruit shape index (length/diameter), firmness (kg cm-2), water-soluble dry matter content (Brix%) and weight of the berries (g) – were evaluated. On 15 of August the rheological parameters were examined – the force needed to tear the skin – bioyield point (g) and flesh firmness (g).
The fruit shape index was oval (between 1.19 and 1.24) for all the examined genotypes. The firmness was between 0.92 (UG1122713 F1) and 1.05(Prestomech F1) kg cm-2, which compliance the needs of the industry. The water-soluble dry matter content was suitable, with a value between 4.49 (Prestomech F1) and 4.65 (UG1122713 F1) Brix%. The weight of the berries was between 45.94 (UG989 F1) and 49.37 (Prestomech F1) g per piece.
The bioyield point was between 76.00 (UG1122713 F1) and 85.16 (UG989 F1) g. The flesh firmness was between 33.68 (UG1122713 F1) and 42.81 (UG989 F1) g.
Finally, we can conclude based on the obtained data that the UG989 F1 hybrid was the most proper for the applied cultivation conditions. This genotype can be recommended for the farmers even in extreme weather conditions.
-
Application of AquaCrop in processing tomato growing and calculation of irrigation water
183-187Views:342The area and volume of processing tomato production is increasing in Hungary. Irrigation is crucial for processing tomato growing. To save water and energy, it is important to know exactly how much water is needed to reach the desirable quality and quantity. AquaCrop is a complex software, developed by FAO, which is able to calculate irrigation water needs, several stress factors and to predict yields. A field experiment was conducted in Szarvas in processing tomato stands, under different irrigation treatments. These were the following: fully irrigated plot with 100% of evapotranspiration (ET) (calculated by AquaCrop), deficit irrigated plot with 50% of ET (D) and control (K) plot with basic water supply was also examined. Dry yield, crop water stress index and soil moisture were compared to modelled data. The yields in the plots with different access to water were not outstanding in the experiment. The model overestimated the yields in every case, but the actual and modelled yields showed good correlation. AquaCrop detected stomatal closure percentages only in the unirrigated plot. These values were compared to CWSI – computed from leaf surface temperature data, collected by a thermal cam in July – and showed moderately strong correlation. This result suggests that Aquacrop simulates water stress not precisely and it is only applicable in the case of water scarcity. Soil moisture data of the three plots were only compared by means. The measured and modeled data did not differ in the case of K and ET plots, but difference appeared in the D plot. The obtained results suggest that the use of AquaCrop for monitoring soil moisture and water stress has its limits when we apply the examined variables. In the case of dry yield prediction overestimation needs to be considered.
-
The effect of water supply for yield formation of processing tomato
165-168Views:124The effect of irrigation on tomato yield depends on the actual weather conditions, basically the air temperature and precipitation (quantity and dispersion). The irrigated plants gave a significantly higher yield, and rainfed plants showed a yield loss. The optimum water supply treatment gave a significantly higher proportion of lycopene than the control (rainfed) treatment (89% and 80% respectively) in case of Brixsol F1 variety. In spite of this we have not found significant difference in case of Strombolino F1 (cherry type). Content of total poly-phenols measured in Strombolino F1 (cherry type) was significantly higher than that found in the Brixol F1 (normal type). The optimum water supply treatment resulted in a significantly lower content of total polyphenols in both years. Tomato fruits are rich in polyphenols the largest amount of which is rutin from among the identified components.
-
The effects of water supply on the physiological traits and yield of tomato
25-30Views:185The SPAD value, the chlorophyll fluorescence and the canopy temperature of the leaves and fruits of tomato hybrid “H1015” were investigated under non-irrigated (I0), deficit irrigated (I50) and well-irrigated (I100) conditions. The aim of the experiments was to show which treatment effect on the examined traits affected photosynthesis, leaf temperature and yield quantity, as well as quality under water scarcity. In the control treatment (I0), the canopy temperature increased, but the SPAD decreased compared to the other two treatments (I50 and I100). Chlorophyll fluorescence produced a fluctuating result. In the end, the number of the fruits was high, but the number of the sick and green berries was increased.
-
Microbiological and Chemical Characterization of Different Composts
106-111Views:80Composting of agricultural waste is considered particularly important from the point-of-view of environmental protection. Degradation of organic substance results in a significant reduction of waste volume.
The end product of the composting process, mature compost, can be used as soil coverage against excess loss of wastes, for mulching, for organic manure etc. The problem of composting has come into limelight in environmental studies and in agriculture.
The quality of the mature compost is determined by physical, chemical and biological parameters of the composting process which, in turn, depend on initial composition of the raw materials, the technology, e.g. regular mixing and moistening and on environmental factors. Quality is the key question in compost use.
We studied the composting process in compost windrows of different raw material composition. We measured temperature, humidity content, pH, organic substance content, nitrogen and carbon content.
We counted the number of bacteria, microscopic fungy, ammonifying and cellulose decomposing microorganisms. We directed the composting process with turning weekly (to provide oxygen) and watering (to provide humidity content 40-60%).
We set up windrows of 1 m3 volume from dry plant substances (cornstalk, pea straw, tomato stalk and crop, weeds) and cow manure not older than 1 week. The cow manure was used at ratios of 0%, 35%, 50%, 65% and 100%, respectively.
We measured changes in compost temperature relationship with outside temperature until they were almoust the same. Humidity was 40-60% in most cases.
At the beginning of the process, pH was slightly acidic-neutral; it later becomes neutral-slightly alkaline (pH: 6.93-8.02) as ammonia is liberated from proteins.
At the end of the process, pH decreased again, due to humification.
Organic substance content decreased as microorganisms mineralized them. Organic carbon content decreased gradually due to microorganisms used it as an energy.
Total nitrogen content increased until middle of july and decreased gradually until than.
The carbon/nitrogen rate were higher in the beginning, it decreased until july-august and increased by smaller degree until end of the process.
The number of bacteria was higher in the first three weeks and between june-september. The number of cellulose degrading bacteria was the highest in the first three month, the number of ammonifying bacteria was the highest from the end of may until sepember.
The number of microscopic fungy was significant in the second part of process, after july.