Search
Search Results
-
Comparison of alveohraph and extensigraph properties of winter wheat samples
27-30Views:100The rheological properties of dough are determined by the amount and proportion of gliadin and glutenin proteins. Extensibility and resistance to the extension of doughs which can be measured using the extensigraph or alveograph allow good assesment of the baking behavior under realistic conditions. In our study, we compared the extensigraph and alveograph parameters of 87 flour samples. The results showed that the alveograph parameters were different from the extensigraph parameters. The classification of wheat varieties was different, and the order of varieties, as well. The alveograph properties were affected by other factors than the extensigraph properties, except the W value. The two rheological tests did not give similar results, therefor neither test are replaceable.
-
Parameter optimization of an inductively coupled plasma mass spectrometer for measuring arsenic and selenium
81-85Views:143In the last decades, an increased interest has evolved in arsenic and selenium. The aim is to understand the environmental, agricultural and biological roles of these elements. In the case of arsenic, the major reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking water bases of some Asian countries, as well as Hungary. The toxicity of higher level selenium content is also known; nevertheless, selenium is essential for several biological functions. Considering its essentialness, in our country, the insufficient selenium intake rate causes a lack of selenium. Measuring the concentrations of these elements provides crucial, but unsatisfactory information, as the speciation, i.e. the form of an element presented in a sample is also required.
In both cases, the most suitable method to determine concentration is inductively coupled plasma mass spectrometry (ICP-MS). Our objective was to optimize the variable parameters of the ICP-MS to attain the lowest (the best) detection limit. For this purpose, we investigated the effect of parameter change on net signal intensity and relative signal intensity. With the optimized parameter settings, the limits of detection for arsenic and selenium were determined, which are 0,032 ng dm-3 for arsenic, and 0,097 ng dm-3 for selenium. -
Comparison of supplier quality assurance methods for compound feed manufacturing from efficiency, product consistency and economical point of view
29-34Views:87Feed manufacturing and human food production are the main routes of use for agricultural products. The food industryparticularly has intensively implemented the recent quality management principles and developed systems that facilitate the continuous improvement and efficiency of the industrial production. Feed production has taken similar approaches however the intensity of deployment at the manufacturer and the rollout towards its supply chain has shown slower progress. The methods, that the feed manufacturer manages the supplier chain of mainly primer agricultural products according to, have a certain impact on the efficiency of the inbound operations, feed product quality and its consistency as well as on other resources. These methods have been built on sound quality management principles that are stated not only in quality standards but also in relevant regulations. Current study addresses the questions related to the link between supply chain quality management and feed product. The objective of the frontier research was to highlight the theoretical possibilities and benefits of the robust design methodimplemented into animal feed manufacturing dealing with highly variable ingredients.
-
Effect of molybdenum treatment on the element uptake of food crops in a long-term field experiment
75-79Views:123Molybdenum, as a constituent of several important enzymes, is an essential microelement. It can be found in all kind of food naturally at low
levels. However, environmental pollution, from natural or anthropogenic sources, can lead to high levels of the metal in plants. Our study is based on long-term field experiments at Nagyhörcsök, where different levels of soil contamination conditions are simulated. Plant samples were collected from the experiment station to study the behavior of elements: uptake by and transport within the plants, accumulation in different organs, phytotoxicity and effects on the quantity and quality of the crop. In this study, we present the effect of molybdenum treatment on the uptake of other elements. Molybdenum is proved to be in an antagonist relationship with copper and sulphur, while molybdenum-phosphorus is a synergist interaction. However, in most of the plants we studied, increasing molybdenum-treatment enhanced cadmium uptake. We found the most significant cadmium accumulation in the case of pea, spinach and red beet. -
The effect of climatic change on the rheological properties of winter wheat doughs
96-100Views:77In present paper we have examined the effect of climatic change on the extensigraph characteristics of wheat-flours. The baking quality
of winter wheat is largely determined by cultivar, but it can be influenced by weather conditions during growing period. Flours were from 5
cultivars grown at one location in three cropping years. We have found that the extensigraph properties of dough are affected by the weather
conditions, nevertheless, different cultivars distinctly react to the increase of temperature and decrease of precipitation. In generally, the
higher average day temperature and lower precipitation level is favourable to produce winter wheat flour with better quality -
Element content analyses in the Institute for Food Sciences, Quality Assurance and Microbiology
203-207Views:111The role of chemical elements to ensure and promote our health is undisputed. Some of them are essential for plants, animals and human, others can cause diseases. The major source of mineral constituents is food, drinking water has a minor contribution to it, so the knowledge of elemental intake through food is crucial and needs continuous monitoring and by this way it promotes the food quality assurance and dietetics.
With the evolution of spectroscopic methods increasingly lower concentrations could be determined, so the elemental composition of a sample could be more precisely and fully described. Due to the results the gathered knowledge up to the present is supported and new observations can be done helping us to understand such complex systems as biological organisms are.
The quality of a food is determined by the full process of its production, consequently it starts with agricultural production so elemental-analysis usually cover the whole soil – plant – (animal) – food chain, by this way the „Fork-to-Farm” precept is true in elemental analysis field also.
The history of elemental analysis in the University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Faculty of Agricultural and Food Sciences and Environmental Management, Institute of Food Processing, Quality Assurance and Microbiology goes back to 1980s when the so called Regional Measurement Central gave the background for research. The continuous deployment resulted in an obtain of an inductively coupled plasma atomic emission spectrometer (ICP-AES) in 1988, which extended the scope of examinations due to its excellent performance characteristics
compared to flame atom absorption (FAAS) and flame emission spectrometers (FES). The instrumental park retain up to date correlate to the developing analytical techniques due to acquiring a newer ICPAES in 1998 and an inductively coupled plasma mass spectrometer in 2004 – which sensitivity is three order of magnitude better compared to ICP-AES. The Institute supports the work with its own ICP-AES and ICP-MS since 2011. -
Studying of quality parameters of Hungarian and Greek honey samples
147-153Views:148Honey has been a valuable food for mankind since ancient times. It was the only sweetener until the start of industrial sugar mass production. Honey plays an important role in our nutrition and its positive effects on health are well-known. The quality of Hungarian honey is perfect, so it is very important to safeguard and monitor its quality continuously and to build up a good traceability and quality assurance system. For such a system, it is necessary to study the nutritional properties and the origin of different honey samples. In our study, we study Hungarian and Greek honey.
-
Comparison of the sample preparation methods worked out for the examination of the element content of wine
77-82Views:113The examination of the potentially toxic elements content of the wines is not easy task, because the most elements are in little concentration (mg kg-1 or μg kg-1) in the wine and the wines contain great amount of organic matrix. The efficient sample preparation is essential for the accurate determination of element content. The eim of our research was to determine which sample preparation method will be the most efficient in examination of wines with ICP technology. The examined wine sample was a 2008 Chardonnay from the Eger wine region. We did the sample preparation and analysis examination in University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Institute of Food Science, Quality Assurance and Microbiology.
We did the analysis examinations with ICP- MS (inductively coupled plasma mass spectroscopy). We always did the sample preparations and the examinations in three times rehearsal. The applied sample preparation methods: dilution with distilled water, open digestion and microwave digestion.
We were able to measure B, Al, Mn, Fe and Zn with only dilution and open sample preparation. In the smaller quantity present Sr and Ba were measurable in the wine in the case of all three methods well. We were able to measure the Co with dilution and open digestion method, while Cr, Ni, and Te with only dilution method. In the case of arsenic we were not able to measure reliable result with dilution and open digestion method because of organic matrix and other components
(alcohols, monosaccharides, polysaccharides, polyalcohols and inorganic salts). On the whole we are able to say that in the case of certain elements (B, Mn, Fe, Zn, Sr, Ba) the open digestion and dilution sample preparation is applicable well, however, in the case of certain elements (As, Al, V, Cr, Se, Mo, Cd, Hg, Pb) we have to develop the methods. It may be development of one of the way, if we develop sample preparation methods to examined element specifically and not
to wine generally. -
Modern Food Safety and Product Identification
339-345Views:74In the beginning of the 21st century the matter of food safety plays an accentuated role in the food industry. Important issues in this topic are the risk of bioterrorism, impurities in the food chain and the ascendancy of customer needs. The solutions of these problems are the introduction of modern quality assurance systems, traceability and identification of products. I review in this paper the possibilities of these systems, the potential advantages and incidental costs. In the tight frame of this paper – omitting the descriptions of technologies – I discuss the most important criterions of systems, which may be able to solve today’s quality food industry problems.