Search

Published After
Published Before

Search Results

  • Effect of Moringa leaf extract and set size on the bulb weight, diameter and yield of onions (Allium cepa L.)
    127-131
    Views:
    234

     Studying the use of natural extracts or biostimulants in improving vegetable plants is the current needs as an alternative way to the use of chemical products. This experiment was carried out to evaluate the effect of Moringa oleifera leaf extract (MLE) as a natural growth regulator on bulb diameter, weight and yield of onions ‘Texas Early White’ cultivar. Therefore, three concentrations (control, 2%, 4% and 6%) of MLE and three different onion set sizes [small (3±1 g/set), medium (6±1 g/set), and large (10±1 g/set)] were prepared in a randomized complete block design with three replications and plant spacing 20×15 cm. MLE was applied as a foliar spray directly onto the plants with the amount of 25 ml/plant every two weeks from sprouting to maturity. The achieved results indicate that the interaction of foliar spray with moringa leaf extract 4% and large set size of 10±1 g/set gave the highest value of the total yield 4802.7 g m-2, while the lowest yield 1531 g m-2 was recorded in the interaction of control and the smallest set size of 3±1 g/set. Also, a significant difference was recorded in bulb diameter separately. Thus, the largest bulb diameter 68.90 mm was obtained from the planting of the largest set size 10±1 g/set with 4% of MLE while the smallest bulb diameter 38.40 mm was recorded from the smallest set size 3 ±1 g/set with control treatment. Similarly, a significant effect was recorded in both set size and MLE separately. The highest bulb diameter 58.71 mm was achieved in the planting of the largest sets 10±1 g/set, while the lowest diameter was 42.12 mm in the planting of the smallest set size 3 ±1 g/set. Similar results were recorded for the bulb weight and total yield. The concentration of 4% MLE produced the highest bulb weight 99.74 g/bulb and yield 3324.5 g m-2, while the lowest bulb weight and yield was obtained in the control treatment 55.61 g/bulb, and 1869.3 g m-2. Consequently, the results indicate the positive effect of Moringa leaf extract which can be applied as a natural substance in the form of foliar spray at critical growth stages to improve the growth and yield of dry onions.

  • Evaluation of the Green bean variety candidate BU-16
    75-81
    Views:
    72

    This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
    The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
    The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
    The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
    Results obtained with the variety candidate BU-16:
    – The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
    – Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
    – The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
    – The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
    – The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
    – The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
    – The total yield and the standard yield of BU-16 is among the highest ones.
    According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested.

  • Correlation between the weather in 2017 and the productivity of maize
    89-93
    Views:
    152
    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
    In Hajdúszoboszló in 2017, up to October, 445.8 mm of rain fell, which is in line with the average values of 30 years, and is only 45.7 mm less than those. In 2017, the effect of increasing the plant number was slighter. Averaged over the observed fertilizer treatments and hybrids, the yield was 9.10 t ha-1 with 60 thousand plants ha-1, 9.11 t ha-1 with 70 thousand plants ha-1 and 9.12 t ha-1 with 80 thousand plants ha-1. Without fertilization, in most cases, increasing the plant number from 60 thousand plants ha-1 to 70-80 thousand plants ha-1 does not increased the yield but decreased it. With N80+PK treatment the yield changed between 8.90 and 11.27 t ha-1. The effect of increasing the plant number was just slightly observable and did not show a clear tendency. The effect of changing the plant number, even with the highest dosage of fertilizers, could not be detected adequately. In contrast with the plant number, the effect of the different fertilizer treatments was expressly traceable. Compared to the control treatment (treatment without fertilization), with N80+PK fertilizer dosage with 60 thousand plants ha-1 the yield increased by 3.36–4.99 t ha-1. The smallest demonstrable proof, i.e. the LSD5% was 0.22 t ha-1, which means that fertilization, in each case, significantly increased the yield. When analysing the effect of fertilization in the average of the hybrids and the different plant numbers, a yield of 5.61 t ha-1 could be detected, which value was 10.12 t ha-1 with N80+PK treatment and 11.61 t ha-1 with N160+PK treatment. Thus, it can be calculated that compared to the treatment without fertilization, the N80+PK treatment increased the yield by 4.51 t ha-1, while compared to the N80+PK treatment, the N160+PK treatment increased the yield by 1.49 t ha-1. In addition to agrotechnical factors, in maize production, the impact of the crop year is specifically of high importance.
    The average yield of hybrids (in the average of the different fertilizer treatments) was 6.81 t ha-1 in 2015, 11.86 t ha-1 in 2016 and 9.11 t ha-1 in 2017. When comparing the yield results against the precipitation data, it is clearly visible that the amount of rain fell in the January– October period is directly proportional to the average yield of maize. The effect of the crop year can be defined in a 5.05 t ha-1 difference in the yield.
  • The effect of Willow extract, Bistep and their combination on some quality parameters of lettuce (Lactuca sativa L.)
    239-247
    Views:
    161

    The research described in this paper was conducted at the University of Debrecen, Farm and Regional Research Institute in its Botanical and Exhibition Garden, Hungary. The aim was to investigate the influence of plant biostimulants on the morphological parameters of three lettuce varieties (May King, Kobak and Great Lakes). Willow bark extract and Bistep were used through irrigation and spray onto the plant leaves with the amount of 5% Willow and 0,5% Bistep. Vegetative parameters like head structure (1….10), head weight (g head-1), head closing (1….10), number of leaves, head diameter (cm), internal stem size (cm) and root weight (g head-1) were measured in 2019 and 2020. According to our results, vegetative parameters are significantly affected by plant varieties and treatments. In the experiment of 2019, important vegetative parameters were influenced by the Willow extract, while in the season of 2020 the most influenced parameters were under the impact of Bistep biostimulants followed by Willow+Bistep. However, the most favourable vegetative growth was recorded in the Kobak variety in the season of 2019 followed by May King and Great Lakes varieties in the season of 2020. On the other hand, the interaction effect of plant varieties and plant biostimulants on the vegetative parameters were varied from seasons. For example, for the season 2019, significantly the highest vegetative value was recorded for the interaction of May King variety treated with Willow extract, whereas in 2020, significantly the most influenced vegetative parameters were under the influence of the interaction of Bistep and May King variety followed by the interaction of Willow+Bistep and Kobak variety.

  • Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
    105-110
    Views:
    97

    In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.

  • Practical experiences of a designing and operating a pilot aquaponic system
    27-32
    Views:
    239

    Aquaponics is the combination of fish farming (aquaculture) and the soilless cultivation of plants (hydroponics). The aquaponics system is an artificial, recirculating ecosystem, in which bacterial processes convert the waste materials in the water used for fish rearing into plant nutrients, and therefore with the generated heat it is suitable for culturing economically valuable plants, and thus it mitigates the nutrient laden and quantity of the intensive fish producing systems’ effluent water.

    The primary goal of our 12 separate unit’s aquaponics system was to gain experience. We would like to find the right plant species, which are fit for that medium, and their crop can be sold. Besides the plants, our attention focused on the fish. Two fish species were included in the experiments, the common carp and barramundi. It was difficult to create them a perfect living space, besides a constantly changing conditions temperature. Apart the above mentioned we had a problem with the number of individuals per tank, the deformity of the fish body and the too high volume of pH (we registered continuous values above 8.4). We get by carps 4.7 grams of weight gain during 15 weeks, because of the bad conditions.

    The main problems at the plants are caused by aphesis and protection against sunburn. Even so we have got the multiples of field yields for each plant species. At salad has grown twice of field yields, tomatoes one and half, kohlrabi than 3.5 times more. The causes of multiple yields are the continuous balanced water and the nutrient uptake of plants. Each plant species fit for cultivating in aquaponics and their crops are delicious, chemical -free, safe and marketable. The plants should be more concentrated. After the experiment, it has been determinated that the carp is suitable for aquaponics, but greater weight gain could be achieved with optimal selection of size of rearing units.

  • Management of phytopathogens by application of green nanobiotechnology: Emerging trends and challenges
    15-22
    Views:
    256

    Nanotechnology is highly interdisciplinary and important research area in modern science. The use of nanomaterials offer major advantages due to their unique size, shape and significantly improved physical, chemical, biological and antimicrobial properties. Physicochemical and antimicrobial properties of metal nanoparticles have received much attention of researchers. There are different methods i.e. chemical, physical and biological for synthesis of nanoparticles. Chemical and physical methods have some limitations, and therefore, biological methods are needed to develop environment-friendly synthesis of nanoparticles. Moreover, biological method for the production of nanoparticles is simpler than chemical method as biological agents secrete large amount of enzymes, which reduce metals and can be responsible for the synthesis and capping on nanoparticles.

    Biological systems for nanoparticle synthesis include plants, fungi, bacteria, yeasts, and actinomycetes. Many plant species including Opuntia ficus-indica, Azardirachta indica, Lawsonia inermis, Triticum aestivum, Hydrilla verticillata, Citrus medica, Catharanthus roseus, Avena sativa, etc., bacteria, such as Bacillus subtilis, Sulfate-Reducing Bacteria, Pseudomonas stutzeri, Lactobacillus sp., Klebsiella aerogenes, Torulopsis sp., and fungi, like Fusarium spp. Aspergillus spp., Verticillium spp., Saccharomyces cerevisae MKY3, Phoma spp. etc. have been exploited for the synthesis of different nanoparticles. Among all biological systems, fungi have been found to be more efficient system for synthesis of metal nanoparticles as they are easy to grow, produce more biomass and secret many enzymes. We proposed the term myconanotechnology (myco = fungi, nanotechnology = the creation and exploitation of materials in the size range of 1–100 nm). Myconanotechnology is the interface between mycology and nanotechnology, and is an exciting new applied interdisciplinary science that may have considerable potential, partly due to the wide range and diversity of fungi.

    Nanotechnology is the promising tool to improve agricultural productivity though delivery of genes and drug molecules to target sites at cellular levels, genetic improvement, and nano-array based gene-technologies for gene expressions in plants and also use of nanoparticles-based gene transfer for breeding of varieties resistant to different pathogens and pests. The nanoparticles like copper (Cu), silver (Ag), titanium (Ti) and chitosan have shown their potential as novel antimicrobials for the management of pathogenic microorganisms affecting agricultural crops. Different experiments confirmed that fungal hyphae and conidial germination of pathogenic fungi are significantly inhibited by copper nanoparticles. The nanotechnologies can be used for the disease detection and also for its management. The progress in development of nano-herbicides, nano-fungicides and nano-pesticides will open up new avenues in the field of management of plant pathogens. The use of different nanoparticles in agriculture will increase productivity of crop. It is the necessity of time to use nanotechnology in agriculture with extensive experimental trials. However, there are challenges particularly the toxicity, which is not a big issue as compared to fungicides and pesticides.

  • Competitiveness of the biomethane opposite with the CHP technology of biogas by definite plant size
    5-9
    Views:
    119

    The biogas sector has never before aroused so much attention as it does today. Combined heat and power (CHP) reliable and cost-effective technologies that are already making an important contribution to meeting global heat and electricity demand. Due to enhanced energy supply efficiency and utilisation of waste heat renewable energy resources, CHP, particularly together with district heating and cooling (DHC), is an important part of national and regional Green House Gas (GHG) emission reduction strategies.

    During my work I am going to use the basic data of a certain biogas plant than I assemble one model from that. Against the CHP technology I am going to plan a biogas cleaning-equipment. During my research it revealed, that in the case of a 1 MW output power plant it is not worthy to deal with biogas cleaning between national conditions. Investigating the quantity of heat recovery in the CHP technology it is obvious, that the net income at 1 m3 biogas is at least 72 times more than the cleaning technology (heat recovery is 0%).

  • Plant protection praxis on Hévíz Nature Conservation Area (Lake Balaton District, Hungary)
    81-83
    Views:
    141

    The nature conservation park, which belongs to the Spa and St. Andrew Hospital for Rheumatics of Hévíz, is 60 ha in size. The famous Lake of Hévíz, the two overfalls and the main buildings of the hospital are located in the middle of the park. They are surrounded by protective forests, parks and gravel esplanades. During the past few decades, the population of neophyton plants and invasive insects have increased considerably. These mean serious challanges to develop efficient control methods. Special care must be taken of environmental and plant protection regulations. Keeping plant protective regulations are especially strict around natural and spa waters.

  • Contexts between apple orchards with various cultivar comparisons and the effect of ATS (ammoniumthiosulphate) on fruit thinning
    35-38
    Views:
    141

    Our research focuses on a fruit thinning material that can also be used in apple production. This material reduces significantly the required manual labor of hand thinning by russeting the blossoms selectively. The ATS (ammonium-thiosulphate) acts as chemical desiccant contrary to the nowadays commonly used materials such as naphthalene acetic acid, naphthyl acetamide, benziladenin and ethylene, which affect the metabolic processes of the plant by regulating the hormone system. In our experimentals cultivar ’Pinova’ and ’Golden Reinders’ were treated with different concentrations of ATS. The effect of these doses on the fruit setting and the quality and quantity parameters of the fruits was studied. According to our results, in the case of cultivar ’Pinova’ the ATS did not have any detected effects at the concentration of 1.5%. Application of ATS at 3% decreased considerably the fruit setting and fruit yield, accordingly the mean fruit size improved. The response to treatment in the case cultivar ‘Golden Reinders’ does not have any similar consistent results.

  • Gene resources for improvement of drought tolerance and yield quality in dry pea breeding
    105-111
    Views:
    86

    The effectiveness of selection for improved drought tolerance and consumption quality in the progeny of crosses between pea cultivars with semi-leafless (afila) and normal leaves and different origins, respectively, were investigated. After single crosses, parent cultivars and F1, F2 and F3 generations were grown under non-irrigated conditions in the same trials. We created a colour scale from 1 to 9 to measure statistically the shade of seed colour. The tolerance of genotypes against high temperature was measured by the number of pods per plant. The 3:1 segregation
    observed in the F2 generation of crosses between semi-leafless and conventional cultivars indicated that the semi-leafless character is determined by a recessive gene. In contrast, the ratios of conventional (Af) and semi-leafless (af) genotypes were 7:1 and 9:1 ratio in the progenies of crosses of Af × af. The genetic progress was effective for improving the seed quality in F3 generation from crosses Af x af where we found that multiple
    dominant alleles controlled the orange colour of cotyledons and its high heritability (h2 A=0,63). Selection is more effective in producing the genotypes with high yield and normal leaves if the crosses were made between the western European cultivars such as semi-leafless Profi and Delta used as maternal cultivars and conventional Auralia cultivars. In this case, there were decreases in the consumption quality, such as seed size and shade of colour. The selection based on the seed weight of single plants for increasing drought tolerance seemed to be more effective in F4
    strains with normal leaves originated from Czechoslovakian maternal cultivar Y228; however, the genetic progress in the improvement of seed size and colour quality was slow. 

  • Examination of the main parameters of roe deer feed compound on two territories
    13-16
    Views:
    99

    It is widespread that roe deer are very choosy. He needs this sorting because the micro organizms, which help the digestion of high fibre plants, are missing in his stomack, that is why they are mostly called „concentrate selectors” Hoffmann, 1985, 1988, 1989).
    These animals should mostly eat easily digestable plants with high nutrition level (pulses, buds, sprouts and flowers), and they are able to do this sorting because of their small mouth size. In winter there is a lack of these plants, so the high selectivity occurs only when the feed is in abundance.
    Examining the amount and quality of vegetation available on the habitat of roe deer we can identify the species which can satisfy their feed demand. It is known, that roe deer as other large ruminants, from the plant abundance prefer certain plants and plant parts while there are others which are avoided. The identification of the eaten species and the rate of their occurance in the feed is the first step to become acquainted with the interaction between animal and the surroundings. 

  • The examination of roe deer feeding on agricultural and woody habitats in winter
    23-26
    Views:
    105

    sorting because the micro organisms, which help the digestion of high fibre plants, are missing in his stomack, that is why they are mostly called „concentrate selectors” (Hoffmann, 1985, 1988, 1989).
    These animals should mostly eat easily digestable plants with high nutrition level (pulses, buds, sprouts and flowers), and they are able to do this sorting because of their mouth size. In winter there is a lack of these plants, so the high selectivity occurs only when the feed is in abbundance.
    Examining the amount and quality of vegetation available on the habitat of roe deer we can identify the species which can satisfy their feed demand. It is known, that roe deer as other large ruminants, from the plant abundance prefer certain plants and plant parts while there are others which are avoided. The identification of the eaten species and the rate of their occurrence in the feed is the first step to become acquainted with the interaction between animal and the surroundings.
    On the examined territories there was significant difference between the disembowelled body masses. The does which come from the hunt Nagyszénás weighed 4-5 kilos more than the does from the Csongrád territory. The main feed components were present in different rate in the samples of the territories, in the Nagyszénás samples grain, dicotyledonous herbacous plants were dominant, and were eaten more. The high level of grain in the feed result in better condition and larger body mass.

  • Fruit melanotic ringspot (FMRS) – a disease of resistant Capsicum genotypes infected with Tomato spotted wilt virus (TSWV) on the fruits
    64-69
    Views:
    64

    Etiology of pepper fruit melanotic ringspot (FMRS) disease (Salamon, 2009) was studied on fruit samples collected in forced pepper populations. It was noticed that in spite of heavy thrips (Frankliniella occidentalis) infestations and of TSWV epidemy detected in the forcing houses, FMRS occurred only in plants having healthy foliage. Symptomatological surveys strongly suggested that FMRS appeared exclusively in specific pepper genotypes. The size of melanotic ringspots has been observed to grow at room temperature during postripening of diseased fruits. A mechanically transmitted plant virus was isolated from symptomatic parts of 9 white pepper fruits affected by FMRS. On test plants each of the virus isolates caused systemic symptoms characteristic to TSWV. Using cDNA/PCR technique and TSWV N-gene specific primers a ca. 300 bp long DNA fragment has been amplified from total nucleic acid extracted from symptomatic tissues but never from asymptomatic parts of the fruits showing FMRS. Plant progenies grown from seeds of FMRS diseased fruits segregated in respect of resistance and/or susceptibility to TSWV infection. TSWV was also detected in and isolated from three fruits showed non-melanotic yellow rings (one of them was infected with a tobamovirus, too). Seedlings derived from these fruits proved to be susceptible to TSWV. Based on the above results we could conclude that the FMRS disease developed on fruits of “cecei” type white peppers that carry a TSWV resistance gene, most likely the Tsw gene in heterozygous form. These fruits were infected with thrips transmitted TSWV and FRMS appeared as a hypersentive reaction (HR) manifested in fruits.

  • Analysis of the main parameters of spring and summer food compound of roe deer (Capreolus capreolus L.) on the two hunting grounds of the Alföld plain
    7-10
    Views:
    93

    It is widespread that roe deer are very choosy. It needs this sorting because the micro organisms, which help the digestion of high fibre plants, are missing in its stomach that is why they are mostly called „concentrate selectors” (Hoffmann, 1985, 1988, 1989).
    These animals should mostly eat easily digestible plants with high nutrition level (pulses, buds, sprouts and flowers), and they are able to do this sorting because of their small mouth size. In winter there is a lack of these plants, so the high selectivity occurs only when the feed is in abundance.
    Examining the amount and quality of vegetation available on the habitat of roe deer we can identify the species which can satisfy their feed demand. It is known, that roe deer as other large ruminants, from the plant abundance prefer certain plants and plant parts while there are others which are avoided. The identification of the eaten species and the rate of their occurrence in the feed is the first step to become acquainted with the
    interaction between animal and the surroundings.

  • Slight damage of the great green bush-cricket (Tettigonia viridissima) (Orthoptera: Tettigoniidae) in some Hungarian maize fields
    65-70
    Views:
    215

    Characteristic cricket damage was observed in two maize fields in northern Hungary, at Máriabesnyő, a district of Gödöllő. The damage level of the two fields did not differ significantly and continual monitoring of field1 showed also a stable infestation level. T. viridissima nymphs and a female were found and observed as feeding on maize plants. The crickets must have disappeared after 18.07. because no more fresh damage was observed after this date. The chewing’s number about on one and two % of the examined plants amounted one and six a plant and their size was between one and eight cm2. This infestation was quite little and might have caused apparently no yield loss. Compared this damage of T. viridissima with former Hungarian experience, this was the usual negligible damage despite the explicit draught in July and August 2015. As regards the global warming, orthopteran damage may be more obvious in the future.

  • Investigation of Salix alba and Populus tremula leaf litter decomposition in the area of Lake Balaton and Kis-Balaton Wetland
    159-162
    Views:
    160

    Plant litter decomposition in inland waters contributes significantly to nutrient load, particularly in still waters, such as shallow lakes and wetlands. The decomposition rates of Salix alba and Populus tremula leaf litter was examined in Lake Balaton and Kis-Balaton Wetland, using litter bag technique. Leaf litter was incubated in small (ᴓ=3 mm) and large (ᴓ=900 μm) mesh size bags for the assessment of the relative contribution of macroinvertebrates to leaf litter decomposition. Dry mass, exponential decay coefficient and chemical parameters of water (pH, conductivity, NH4 +, NO3 -, SO4 2-, PO4 3-, Cl-) were determined. Leaf mass loss showed negative exponential pattern during the 168 days of the decomposition period. Leaf litter mass loss generally did not differ between the small and large mesh sizes, suggesting that macroinvertebrates generally have a negligible role in leaf decomposition in the winter period.

  • Possibilities of downsizing sweet cherry trees via growing techniques
    71-74
    Views:
    182

    By applying smaller crown sizes and intensive growing techniques, many advantages can be identified compared to the extensive orchards. Also, nursing/pruning and harvest work can be performed more effectively. The outer and inner quality parameters of the fruit and the effectiveness of plant protection techniques are improved. The smaller crown size enables us to apply technologies for ensuring yield safety (e.g. hail, rain, bird nets), resulting in an increase in productivity. The introduction of smaller trees poses a great challenge to cherry production. Trials with dwarfing rootstocks have not yet been successful, therefore, we must use the cv. Mahaleb rootstock, which is excellently adapted to the Hungarian conditions, and also has a stronger growth. In addition, rootstocks with such strong growth are needed for the necessary regeneration of the productive parts of cherry cultivars, there is a need for. At the research garden of the University of Debrecen in Pallag, we planted 21 cherry cultivars on cv. Mahaleb (CT500) rootstock, in a 4 m x 1 m spacing pattern, in the spring of 2000. In our study, we demonstrated the possibilities of developing and maintaining the string super spindle through repeated summer pruning, in terms of growth, bud and fruit formation,. Based on these parameters, we determined which cultivars are the most suitable for intensive production.

  • Texture analysis as a method for grape berry characterization
    Views:
    170

    The marketability of table grapes is mainly characterized by berry size, color, taste and texture. Mechanical measurements of table grape berries could provide objective information on the textural qualities of grape berries. In addition, this method might be suitable to study the effects of phytotechnical methods (such as girdling) on table grape quality. The aim of this preliminary work was to demonstrate how instrumental testing could be used to examine the effects of girdling on berry grape texture and define the textural characteristics of table grape berries. Cane girdling was carried out at veraison in two table grape varieties. Texture analysis was performed several times during the maturity. Besides this examination another five varieties were analyzed to assess their berry mechanical properties. Double compression test was used to determine berry hardness and its derived parameters. Puncture test was applied to evaluate skin hardness, skin elasticity and skin break energy. Skin thickness was also investigated. Berry hardness, skin hardness and skin thickness of the girdled grapevines were significantly affected by this technique. Most of the textural parameters showed differences among the seven cultivars.

  • Examinations of the carbon dioxide emission of the soil in the case of different tillage methods in a field experiment
    209-212
    Views:
    209
    Today's global challenge is the increasing concentration of carbon dioxide (CO2) and other greenhouse gases in the air. The level of CO2 emissions may be significantly affected by the agriculture and, more specifically, the applied tillage method, even though to a lesser extent than industrial production. On a global scale, the CO2 emission of an agricultural area is insignificant in comparison to that of a large-scale plant in an area of the same size, but areas under cultivation, including arable land, have a large global area. In this paper, we investigated the relationship between applied soil tillage methods and carbon dioxide emissions in the case of different fertiliser treatments. In our experiment we examined four types of tillage with five different fertiliser effects. Comparing fertiliser treatments and tillage methods, it was found that their interaction significantly affected carbon dioxide emissions, the lowest value was obtained in the case of the 210 l ha-1 Nitrosol+N-LOCK – tillage radish treatment. Strip and tillage radish methods have relatively homogeneous, low value.
  • Identification and biological examination of some inland Monilinia species
    27-29
    Views:
    113

    The aim of this study was to identify and biologically analyse some Monilinia species from Hungary. 146 M. fructigena and 28 M. laxa species out 174 infectious fruit from all over the country were used for the study. For further study 10 isolates were used and apple fruit was inoculated with them according to Koch postulate. 1–2 mm ochre exogen stromas were observbed on infectious plant parts and growing signs on culture of all isolates were identical to M. fructigena. To affirm classical identification, isolates with molecular biological method were also prepared using PCR reaction. Control isolates of M. laxa, M. fructigena and M. fructicola were used. The size of PCR product showed that all isolates had a 415 bp band which was typical of  M. fructigena. Results support the previous observation that M. fructigena and M. laxa species occure all over Hungary.

  • Effect of Irrigation on Maize Yield (Zea mays L.)
    30-35
    Views:
    297

    We have been continually examining the fertilizer and irrigation reaction of commonly cultivated maize hybrids for nearly twenty years at the Látókép experimental station of the Center for Agricultural Sciences, Debrecen University.
    Upon evaluating the results, it can be established that year significantly influences the size of yield. Between the years of 1999 and 2002, in the average of applied fertilizers the difference is 3,4 t/ha, but even in irrigated treatments it reaches 3 t/ha. This is more than the effect of irrigation. Of the applied agrotechnical elements, the yield increasing effect of fertilization is the greatest and can even be greater than the effect of year. The yield increasing effect of fertilization can be reliably detected with small and medium doses, but at higher doses a plateau section is reached, where it is not worth applying more nutrients. Cultivation with irrigation can only be done with appropriate nutrient supply, due to the positive correlation of the two factors. The positive correlation also means that if the water supply of the plant declines, less fertilizer is needed for safe production. The two factors (irrigation and fertilization) have to be increased or decreased at the same time.
    According to the experiment, in unirrigated treatments, 90 kg/ha nitrogen and the related phosphorus and potassium are enough, while in irrigated treatments this was 120 kg.

  • Estimation of the vine-shoot yield in the Gyöngyös district
    21-26
    Views:
    109

    Every year, a significant amount of vineyard prunings is generated in Hungary. Instead of utilization them, it is burned directly on the field in spite of the limitations of legalization highly pollute the environment in recent decades. The vineyard pruning itself or with other by-products from pomology and forestry can be significant amount of fuel source. However, before the planning to utilization the essential task is to estimate the potential. This study examine that how many vineyard is generated in the micro-region of Gyöngyös in every year on appointed vineyard.

    In order to vine-branch potential calculate more accurate data was necessary so the products had to be determined for all plant. Thus, the biomass resource and the utilization become plannable. As the result of the experiment we can estimate that 1,5 t/ha vineyard pruning are generated. It means more than 9 thousand tons pruning in the micro-region of Gyöngyös. This amount can be convert into fuel source more than 150 thousand GJ heating value.

    The results evince that the vineyard pruning is important fuel source in every year in the micro-region of Gyöngyös. Further usage is suggested for other regions in other size.

  • Effects of the development of production factors on productivity
    13-18
    Views:
    119

    In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.

    The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.

  • Reduction possibilities of the production costs of green electricity by using waste heat
    15-20
    Views:
    165

    In my study, I examine the possibility of the reduction of green electric power’s gross production cost. My research topic may have wider considerations, since in the case of CHP technology the utilization of by-product thermal energy is not possible, and the whole production cost devolves upon green electric power. I introduce five options for the use of the heat energy, based on national and international literature and in-depth interviews.

    From the aspect of efficiency, it can be stated that as alternatives, beer production and desiccation may be mentioned, since these two models were appropriate for the utilization of the total quantity of waste heat, and in the given circumstances the lowest reduction of green electric power’s production costs was achieved in these cases utmost.