Search

Published After
Published Before

Search Results

  • Applied EDI technologies in food traceability
    69-74
    Views:
    98

    Due to globalisation, the new technological developments and the complexity of food supply processes, the European food sector is increasingly becoming more complex. The consumers’ trust in food, triggered and affected by a number of food crises, is low. Today, consumers increasingly expect safe and high quality food and demand information about the origin of their food. Also, economic health of food industry can be greatly affected by food crises; therefore efficient and effective mechanisms are required to assist food industry in tracking and tracing products along the food chain. In this paper we discuss the criteria for efficient and effective traceability system from an IT perspective (mainly data exchange) and we identify key requirements for ICT enabled traceability.

  • Quality management and traceability in crop production
    273-277
    Views:
    189

    Today, food safety and quality is an everyday issue. Scandals in the food industry drew attention to the role and responsibility of food producers in the food chain. The European Union has set up a new integrated approach towards food safety, to which Hungary as an EU member and export-oriented country has also joined. The new “from farm to fork” principle states that food and feed production cannot be handled separately, as only feed produced from good quality raw materials can ensure safe food products. Another important issue is the traceability of products, allowing for the localization and recall of the defected item. In Hungary, there have been different documentation systems for tracking and tracing products, such as the land register in crop production, animal register in the livestock sector and hygiene registers in the food industry. In order to meet EU requirements, there is a growing number of initiatives to include primary production in the scope of food safety standards. The study introduces and compares the various management systems used in crop production.

  • Risk effects of the spread route of mycotoxins
    90-95
    Views:
    178

    In Hungary the mycotoxin is a great problem, because there are many natural toxins in wheat and maize. These cereals can be found on
    considerable proportion of the country’s sowing area, and they are deterministic food for the population. The direct human and animal
    utilization of the contaminated cereals mean a serious risk in the food chain. In Hungary’s climate the soil is contaminated with pathogen
    moulds, particularly Fusarium species, which increase by respective temperature and moisture content in cereals. The Fusarium can
    decrease the quality of the wheat in different ways: decrease the germination capability and cause visible discoloration and appearance of
    mould, reduces the dry material and nutrient content of the grain. From the toxins produced by the Fusarium genus, the trichotecene (T-2,
    HT-2, deoxinivalenol, nivalenol, diacetoxyscxirpenol, Fusarenon-X) and the estrogenic zearalenon (F-2) are the most common in Hungary.
    The fumonisins (FB1, FB2, FB3) first identified in 1988, relatively newly discovered, are also important. Major proportion of mycotoxins in a
    healthy organization is metabolized by the enzyme system of liver and intestinal bacteria. The toxicity is reduced or even leaves off.
    However, more toxic and biologically active compounds can be formed. For the reduction of mycotoxin-contamination several possibilities
    are available in the case of storage, processing and feeding.

  • The effect of β-glucan, carotenoids, oligosaccharides and anthocyanins on bacteria groups of excreta in broiler chickens
    15-20
    Views:
    271

    This study was conducted to examine the effect of natural compounds, such as β-glucan, carotenoids, oligosaccharides, and anthocyanins in the diet on bacteria gropus of excreta in Ross 308 broiler chickens. Chickens were fed 5 diets: control (basal) diet, a diet supplemented by β-glucan at 0.05%, and diets supplemented by carotenoids, oligosaccharides, or anthocyanins at 0.5% of each compound. On experimental day 19, excreta were collected to determine the proportion of Lactobacillus, Bifidobacterium, Campylobacter, Clostridium, and Escherichia coli. Samples were collected aseptically and snap-frozen in liquid nitrogen. Bacterial DNA was isolated from samples, then polymerase chain reaction using primer pairs designed to the 16S rDNA of bacterial groups were applied to define the proportion of the mentioned bacteria. Another universal primer pair was used to amplify a region of 16S rDNA of all the examined bacteria. Proportion of each bacterial groups was determined relatively to the intensity of universal PCR product band by gel documenting system and ImageLab software. Based on the results, carotenoids and anthocyanins increased the proportion of Bifidobacterium, which might imply the beneficial effects of the mentioned compounds on the bacteria composition of excreta.

  • Element content analyses in the Institute for Food Sciences, Quality Assurance and Microbiology
    203-207
    Views:
    151

    The role of chemical elements to ensure and promote our health is undisputed. Some of them are essential for plants, animals and human, others can cause diseases. The major source of mineral constituents is food, drinking water has a minor contribution to it, so the knowledge of elemental intake through food is crucial and needs continuous monitoring and by this way it promotes the food quality assurance and dietetics.
    With the evolution of spectroscopic methods increasingly lower concentrations could be determined, so the elemental composition of a sample could be more precisely and fully described. Due to the results the gathered knowledge up to the present is supported and new observations can be done helping us to understand such complex systems as biological organisms are.
    The quality of a food is determined by the full process of its production, consequently it starts with agricultural production so elemental-analysis usually cover the whole soil – plant – (animal) – food chain, by this way the „Fork-to-Farm” precept is true in elemental analysis field also.
    The history of elemental analysis in the University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Faculty of Agricultural and Food Sciences and Environmental Management, Institute of Food Processing, Quality Assurance and Microbiology goes back to 1980s when the so called Regional Measurement Central gave the background for research. The continuous deployment resulted in an obtain of an inductively coupled plasma atomic emission spectrometer (ICP-AES) in 1988, which extended the scope of examinations due to its excellent performance characteristics
    compared to flame atom absorption (FAAS) and flame emission spectrometers (FES). The instrumental park retain up to date correlate to the developing analytical techniques due to acquiring a newer ICPAES in 1998 and an inductively coupled plasma mass spectrometer in 2004 – which sensitivity is three order of magnitude better compared to ICP-AES. The Institute supports the work with its own ICP-AES and ICP-MS since 2011. 

  • Comparison of supplier quality assurance methods for compound feed manufacturing from efficiency, product consistency and economical point of view
    29-34
    Views:
    142

    Feed manufacturing and human food production are the main routes of use for agricultural products. The food industryparticularly has intensively implemented the recent quality management principles and developed systems that facilitate the continuous improvement and efficiency of the industrial production. Feed production has taken similar approaches however the intensity of deployment at the manufacturer and the rollout towards its supply chain has shown slower progress. The methods, that the feed manufacturer manages the supplier chain of mainly primer agricultural products according to, have a certain impact on the efficiency of the inbound operations, feed product quality and its consistency as well as on other resources. These methods have been built on sound quality management principles that are stated not only in quality standards but also in relevant regulations. Current study addresses the questions related to the link between supply chain quality management and feed product. The objective of the frontier research was to highlight the  theoretical possibilities and benefits of the robust design methodimplemented into animal feed manufacturing dealing with highly variable ingredients. 

  • Reference genes for livestock gene expression profiling – Literature review
    81-89
    Views:
    198

    Quantitative real-time polymerase chain reaction (qPCR) is an essential tool for understanding animal cell’s response to developmental progression or to different experimental conditions at gene expression level. However the reliability of this method heavily lies on proper normalization (measuring a target and a reference gene’s expression from the same sample to correct for technical related variations).
    Our literature review aimed to summarize the articles addressing the most important livestock species in regards of reference gene stability used as normalizers for quantitative real-time polymerase chain reaction experiments. Stably expressing reference genes were categorized into 14 distinct groups according to gene function. The number of reference genes tested and the publication numbers according to years and the ranking algorithms were also noted.
    Counting showed that genes encoding ribosomal protein components are ranked as most stable in majority of cases and therefore should be taking into account for qPCR stable normalizer gene finding experiments.

  • Modern Food Safety and Product Identification
    339-345
    Views:
    122

    In the beginning of the 21st century the matter of food safety plays an accentuated role in the food industry. Important issues in this topic are the risk of bioterrorism, impurities in the food chain and the ascendancy of customer needs. The solutions of these problems are the introduction of modern quality assurance systems, traceability and identification of products. I review in this paper the possibilities of these systems, the potential advantages and incidental costs. In the tight frame of this paper – omitting the descriptions of technologies – I discuss the most important criterions of systems, which may be able to solve today’s quality food industry problems.

  • The effect of the supply chain exerting physical stress on the microbiological status of bottled natural mineral water
    189-193
    Views:
    206

    Mineral water consumption increased dramatically in the last 30 years. One reason for this change lies in the changing consumer behaviour: consumers are increasingly recognizing the importance of healthy nutrition and appreciate the beneficial nutritional physiological properties of mineral water. Local mineral water harmonizes well with imported waters. Bottled mineral water may travel several hundred kilometres until it reaches consumers. In the present study, the dynamic mechanical vibration caused by transporting on public roads was simulated in laboratory vibration tests then samples were subjected to microbiological examinations in compliance with legislations currently in force. Due to this vibration, the initial microbe count increased by two orders of magnitude, while after terminating the 4-hour mechanical action it decreased gradually. Growing dynamics of microbes constituting the total germ count at 22 °C and 37 °C were almost similar.

  • Review on the fatty acid profile and free fatty acid of common carp (Cyprinus carpio)
    99-105
    Views:
    173

    Carp or ponty in Hungarian, is considered commercial freshwater fish, which is an adaptable species in both wild and cultured conditions. Carp has high nutritional value content, favorable taste, it is rich in protein, and low in saturated fat. The nutritional content in fish is composed of many chemical constituents and influenced by many factors. One of the components that its content may be different due to internal and external factors is fatty acids, which may vary depending on endogenous and exogenous factors. The endogenous or internal factors include the genetic, size, sexual maturity, and life cycle phase. While microclimate, water quality, quality of food or diet habit, and the amount of available food or starvation are considered as exogenous or environmental factors. Freshwater fish has the ability to convert essential fatty acid into long chain polyunsaturated fatty acid like AA, EPA, and DHA. Most results showed that palmitic acid and oleic acid were the dominant SFA and MUFA in carp both for wild and farmed carp in all seasons. The PUFA for wild carp was mainly dominated by DHA, while on farmed carp by LA. It confirmed that high LA content in farmed carp was related to the diet habit. The amount of lipid and FA were changed in line with the season. Even the statistical analysis showed no significant difference, but some studies showed a contrasting result. Moreover, most obtained results acknowledged that FA tends to decrease during the spawning period. The amount and composition of FA were affected by the total lipid content. The lipid must be broken down into simpler compounds such as FA or FFA for the metabolism of fish. The result of metabolism then transported into the utilising tissue and used as energy.

  • Economic Assessment of Biodiesel Production for Hungarian Farmers
    72-76
    Views:
    92

    Utilisation of oil of plant origin as a fuel is gaining acceptance in the European Union and elsewhere. Besides environmental protection, energy saving, and decreasing over-production of food. Additionally, the subsidisation of farmers and the development of rural sub-regions also contribute to its spread. This study specifically focuses on the direct effects biodiesel's raw materials and final products are now having on farmers, while reviewing and quantifying these effects. I have purposely restricted my analysis to these two elements of the biodiesel chain.
    The biodiesel chain seems to be a great method for improving the economic and social position of participant farmers in many ways. Presently, the profitability of raw materials’ production looks to be the crucal point in the chain, and could be strengthened best with intensive, habitat-specific agrotechnic. It would only be possible to reach a favourable profit margin for farmers if yields reach unrealistic averages or if there is a significant hike of the 2000 producer’s price in the oil plant branch.
    The main attraction of sunflower- and oilseed rape production lies in the stabilization of market conditions, which is not only gong to appear in oil plant branch but – thanks to the reduction of outputs – also in the cereal branches. Better economic safety for farmers may play a role at least on the same level as in plant production, which involves more risks than profit maximalization.
    The reduction of the prime cost of biodiesel could be possible through the direct combustion of the whole oilseed plant or its residues or electricity production using them. Whereas energy demand for biodiesel production is low (appr. 5%) but it needs subsidization and the prices of natural gas and electrical energy presently look favourable in Hungary. Additionally harvesting and baling of the residues is technically problematic, which is why their use may seem to be reasonable just over the middle or long term. Another possible factor of cost reduction could be the centralization of some partial operations, which needs serious financial resources to reduce amortization cost per product, provided there be several biodiesel projects near each other during establishment. Creation and operation of a logistical system could also be a good method for improving the viability of the biodiesel chain, in order to optimize transport schedule and distances. However there are also some organizational difficulties in this case.

  • The role of disease resistance in the registration of crop varieties in Hungary
    27-29
    Views:
    148

    Variety testing including disease resistance test of the major crops has been carrying out since the 1960’s in Hungary. Testing for resistance of the new candidate varieties is performed in the so-called VCU (Value for Cultivation and Use) trials under natural infection and in special small-plot or micro-plot trials using different disease provocative methods. Disease resistance, especially those of multiple and horizontal-type (race non-specific, partial or durable) resistances, has recently become a key limiting factor in the state variety registration. The role of disease resistance in the decision-making process of variety registration is demonstrated on the examples of winter wheat and sunflower as two major field crops in Hungary.

  • The factors affecting the proliferation of mould fungi and mycotoxin production during the storage of wheat and the identification methods of the appearing branches
    129-133
    Views:
    144

    Nowadays, it is often suggested that, we should eat products made with whole grain cereals, despite of the fact that it raises the risk of consuming wheat products infected by mold and their toxins originated from the plough-lands and the stocks.
    Two third of the cultivated fields in Hungary are planted with cereals. The most alarming problem for food and feed security is caused by the Fusarium species. The greatest problem of all is caused by the mycotoxins. When they get into the food chain they can be a serious threat to public health. In addition, we have to face up to the problem of the effects of global warming that influence the growth of microbial infections in different ways.
    In this article we tried to summarize the effect of climate change on molds, the factors which have effect on growing and mycotoxin producing of molds and the identification methods of molds.

  • Heavy Metals in Agricultural Soils
    85-89
    Views:
    84

    The soil constitutes the basis of the food chain. To keep soil conditions in a good trim is very important, it’s part of the sustainable development and of producing food supply harmless to health.
    In some cases, soil productivity is the only important part, qualitative requirements or economical characteristics can improve it. The soil is threatened by two danger factors: the soil degradation and the soil pollution. The accumulation of different harmful and/or toxic substances in the soil is well known. Heavy metals constitute a part of it. Metals in the soil and in the soil-solution are balanced. This balance depends on the type of the metal, on the pH, on the cation-band capacity of the soil, on the redox relations and the concentration of cations in the soil.
    To be able to handle the metal contamination of the soil, it is important to estimate the form, the possible extension and the concentration of metals.
    Of course, the different types of soils have different physical-chemical, biological and buffer capacity, they can moderate or reinforce the harmful effects of heavy metals. To draw general conclusion of the dispersion and quantitative relations on the metals originated from different contamination sources is hard, because in some emissive sources contamination is limited in small areas but on a high level, some others usually expand on larger areas, and as a result of equal dispersion, the contamination’s level is lower.
    Heavy metals – unlike alkali ions – strongly bond to organic materials, or infiltrate in a kelát form. Their outstanding characteristic is the tendency to create metal-complex forms. Kelats take part in the uptaking and transportation of heavy metals. Heavy metals exert their effects mostly as enzyme-activators.
    The metals cannot degrade in an organic way, they accumulate in living organisms, and they can form toxic compounds through biochemical reactions.
    Lot of the heavy metals accumulate on the boundaries of the abiotic systems (air/soil, water/sediment), when physical or chemical parameters change, and this influences their remobilization.
    Human activity plays a great part in heavy metal mobilization, results in the human origin of most biochemical process of metals.
    To understand the toxic influence of accumulated metals of high concentration, their transportation from soils to plants or their damage in human health, must clearly defined and investigated.
    For effective protection against soil pollution, the types and levels of harmful pollution to soil must identified, regarding legal, technical and soil-science aspects, preferable in a single way. Difficulties in this area mean that toxicity depends on loading, uptake, soil characteristics and living organisms (species, age, condition etc.), furthermore, local and economic conditions considerably differ.

  • Realisation of customer focus from quality and forage safety aspects in the Hungarian mixed feed production
    35-38
    Views:
    129

    Customer focus is one of the main principles of Total Quality Management, and it is inevitable for long term, mutually successful vendorcustomer partnerships. The strictly controlled quality management systems of animal feed industry ensure that product quality meets the expectations of all parties involved and, indirectly the reliability of human food raw materials. Meanwhile, the participants of agricultural production are variably quality conscious, so feed manufacturers support their supply chain and also their customers with professional background and they play a key role in safe food chains from farm to fork.

  • Possible alternatives in crop nutrition
    109-112
    Views:
    122

    The protection of the environment is our common task. All pollution that exposes our soils, plants or the environment – as taken in any proper or extended sense – will appear sooner or later in the food chain and in human beings who are on the top of the food-chain pyramid. The aim of our work is to give a brief overview of the effects of selected industrial wastes on the physiological parameters of corn plants. Sewage sludge and lime sludge were examined. These materials contain lots of useful element for plants (e.g. iron, phosphorus, potassium, zinc). However, their aluminum, chrome and lithium contents are also considerable. The element contents in sewage sludge and the filtrates of lime sludge, as well as the dry matter accumulation and relative chlorophyll contents, were measured. The disadvantageous and advantageous physiological effects of the examined materials were confirmed. The compensation effect of the environment is excluded; however, the neutralization of environmental impacts is not infinite under natural circumstances.

  • Investigations of Thrips tabaci and Aeolothrips intermedius population dynamics in tobacco plantations
    121-127
    Views:
    216

    Studies were conducted between 2015 and 2017 with yellow sticky traps in seven tobacco plantations. The purpose was to determine when and in what numbers onion thrips individuals can settle into tobacco plantations. The primary objective of the study was to determine the proper timing of chemical treatments, furthermore, the determination of crucial factors that can influence the population dynamics of Thrips tabaci.

  • Examination the effects of different herbicides on the soil microorganisms of a calcareous chernozem
    121-126
    Views:
    92

    Pesticides play a key role in fighting weeds, pests and parasitic fungi. According to surveys, pests reduce the yield of agricultural crops by 35% worldwide. Pests, fungi and weeds account for 14%, 12% and 9% yield loss, respectively (Gáborjányi et al., 1995). Chemicals have contributed to increasing and maintaining the yields of crop production for decades. Today, agricultural production (in spite of many efforts) is unthinkable without the use of pesticides (herbicides, insecticides and fungicides). On the other hand, these chemicals contribute to the pollution of the atmosphere, surface and underground waters, and agricultural soils, especially if they are applied improperly.
    The sustainable agricultural production pays attention to environment-friendly cultivation-technologies; but at the same time it makes an effort to produce good quality and economical products. The examination of the herbicides’ secondary effects, fits into this chain of idas namely, how the herbicides affect – stimulating or inhibiting – the soil microbiological processes, prevention of soil fertility.
    In the course of the experimental work the effect of herbicides on soil biological properties were examined in different maize (Zea mays) cultures. We wanted wished to know that how the herbicides affect the quantity change of soil microorganisms, the life of different physiological groups of bacteria and the activity of microorganisms. A small pot experiment was set up in 2008 with the application of two herbicides - Acenit A 880 EC and Merlin 480 SC – in the breeding house of the Department. The moisture content and nutrient supply were at optimal level in the experiment.
    On the basis of results the following can be stated: 
    1. It can be stated that the two herbicides and all their doses affected negatively the number of total soil bacteria, the
    inhibiting effects were significant. The quantity of microscopical fungi increased by the effect of Merlin 480 SC and decreased in the treatments of Acenit A 880 EC.
    2. The Acenit A 880 EC had stimulating effect on the nitrate mobilization. The CO2-production was stimulated by the basic doses of herbicides; the other treatments did not influence the CO2-production significantly.
    3. The quantity of microbial biomass-carbon –except for only one treatment- decreased significantly by the effect of herbicides. Besides it, the quantity of microbial biomass-nitrogen increased significantly in the treatments of Acenit A 880 EC.
    4. The biomass of test plant decreased in the treatments of herbicides, their quantities were smaller than in the control. In the pots treated by Merlin 480 SC, parallel with the increase of doses decreased the quantity of plant-biomass.

  • SSR based characterization of peach (Prunus persica L.) and apricot (Prunus armeniaca L.) varieties cultivated in Hungary
    17-24
    Views:
    307
    The SSR (Simple Sequence Repeat) markers allow the discrimination of the cultivars and determination its specific DNA fingerprints. The aim of this research was to evaluate fifteen apricot (Prunus armeniaca L.) and fifty-one peach (Prunus persica L.) genotypes cultivated in Hungary to obtain their DNA fingerprints in 6 SSR (Simple Sequence Repeats) loci by allele numbers and sizes.
    DNAs were extracted from leaves. PCR was carried out with CY-5 fluorescent labeled Prunus microsatellite markers and the products were separated on polyacrylamide gel with ALF (Automated Laser Flourometer)-Express II.
    According to our results, in the case of peach genotypes, all 6 SSRs were able to amplify alleles. UDP 96 005 was the most informative marker and UCDCH 17 was the least due to its monomorphic pattern. Regarding the apricot samples BPPCT 041 did not amplify any allele. In the case of P. armeniaca UDP 96 005 had the highest heterozygosity index as well and the highest number of alleles. The least informative marker was the UCDCH 17. Since the 6 SSR were not enough to discriminate the apricot and peach genotypes, it is suggested to use more SSR primers.