Search

Published After
Published Before

Search Results

  • Heat treated feeds in turkey feeding
    19-22
    Views:
    93

    The main aim of our study was to determine the effect of expanded and pelleted feeds, as well as the only pelleted feed based on wheat and corn, on the production of turkeys. In May 2006,, a fattening experiment on turkeys was started on the starter farm of Habar Ltd in Szarvas, owned by the Gallicoop Corporation. 17 day old male turkeys were involved in the fattening experiment. The experiment lasted 117 days. At that time, theanimals were 134 days old. After the experiment was completed, they were slaughtered. The following parameters were examined: growth, feed conversion ratio, carcass traits. Turkey feed were produced separately at different times. Similarly to the standard method of turkey fattening, 8 phases feeding was carried out. The fattening experiment was adjusted on male turkeys in 4×12×6 grouping (4 treatments: expanded and pelleted, and only pelleted corn and wheat feed; 12 repeats: number of pens/treatments; 6 birds/pen) 6-6 turkeys from 12 pens per each treatments were measured individually from the 17th day (starter) and at the time of each following feeding changes and mortality. The average of the group was calculated. The average daily weight gain, proportion of the given feed per pen, feeding changes and mortality were determined. The average daily feed intake and the feed conversion ratio were calculated.

  • The imact of crop rotation and fertilisation on the SPAD values of winter wheat on chernozem soil in a long-term experiment
    123-126
    Views:
    126

    We have carried out our outdoor field experiments at the Látókép Experimental Farm of the CAS of the University of Debrecen in the cropyear of 2012/2013 on chernozem soil in a long-term experiment. We have studied the effects of two different preceding crops (sweet corn, sunflower) on the development of the SPAD values of wheat varieties of different genotypes in the cases of control, N60+PK and N120+PK fertilizer treatments. According to our research results, we have concluded that the preceding crop, the fertilizer application and the variety selection influenced the SPAD values. According to our data, we have measured higher SPAD values after sweet corn preceding crop, the standard deviations were in a smaller range in the case of the studied varieties. After sunflower preceding crop, smaller averages were experienced with wider standard deviation range. In the case of favourable preceding crop, the differences between the varieties are more pronounced than in the case of unfavourable preceding crop. The maximal SPAD values were measured in milky ripening in the case of N120+PK fertilizer treatment.

  • The Effect of Tillage Treatments on Soil Temperature at Planting and on Corn (Zea mays L.) Yield
    40-44
    Views:
    92

    The effect of soil temperature was evaluated on the yield of the Occitan corn hybrid at a depth of 5 cm. We examined this effect on the time required from planting to emergence for three average durations: five, ten and fifteen days, all calculated from the day of planting. Winter plowing (27 cm), spring plowing (23 cm), disc-till (12 cm) treatments and 120 kg N per hectare fertilizer were applied. As a result of our analysis, we determined the post planting optimum soil temperatures for various time periods. The average soil temperature for a time period of 15 days post planting is the most usable for determining actual yields, followed by ten days, with five days proved to be the least usable (winter plow R2 = 0.86, spring plow R2 = 0.87, disc-till R2 = 0.64).

  • Evalution of energy for bioethanol production
    77-80
    Views:
    106

    The objective of this study was the ethanol which classified as agro fuels. The aim of our research was the calculation of efficiency of bioethanol production, and evaluates the yield of maize hybrids grown for this purpose. We examined the energy demand of corn production per hectare in two vintages of 2009 and 2010. The focus of the experiment was placed in three different doze of fertilizer. Results show that the control corn plot used the least amount of non-renewable energy. Improving starch yield by adding fertilizer required additional nonrenewable energy inputs. So then the invested energy has a great impact on the efficiency.

  • The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
    143-147
    Views:
    156

    In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.

    Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.

    The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.

    In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.

    The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.

    However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.

    As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.

  • Examination of plant number and sowing date in different crop years
    79-82
    Views:
    99

    We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.

    In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.

    We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.

    Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.

  • Mycotoxin contamination in maize triggered by arthropod pests and the related protection possibilities
    59-64
    Views:
    140

    Mycotoxin contamination in harvested maize has increased in the last decades, which can be unequivocally back to the plant health troubles caused by global warming. The increasing of wounds in maize crops was occurred by climate change both on direct (hailstorm) and indirect
    (newly appeared pests) ways. In additional, the settling phytopathogenic microfungi on these plant wounds inflict serious human and animal health problems.
    The changing of Hungarian arthropod pests assemblages stand in the background of this dangerous nuisance complex. The spreading of European corn borer (Ostrinia nubilalis Hbn.) bivoltine ecotype as well as the newly appeared adventive species [cotton bollworm Helicoverpa armigera Hbn.), western corn rootworm (Diabrotica v. virgifera LeConte), fourspotted-sapbeetle (Glischrochilus quadrisignatus Say)] in Hungary can be responsible for this situation. In total, all technological elements, which obstruct the damage of these chewing mouthparts pests, as well as moderate the mechanical damage of maize, can be contribute to the reduction of both these phytopathogens injuries and mycotoxin contaminations.

  • Possibilities of Corn Seed Commercialization on the Hungarian Market in 2003
    166-169
    Views:
    61

    According to the sales results of the past two years we can draw the conclusion that although the Hungarian hybrids have very good capabilities, they are still in a big disadvantage in the corn seed sales sector, considering other foreign varieties. These above mentioned disadvantages, as published in prior essays, are not because of the variety’s low quality, but the lack or little presence of marketing. In order to gain position and market on the seed sales sector in Hungary, a lot more has to be done in the area of advertisement.
    Seed advertising is very particular and different from all other types of goods. To make growers familiar with your product, you have to be in continuous contact with them, through field days, exhibitions and presentations, besides the well known and in other areas also used quotidian advertisement methods.
    Although Hungarian breeders reach better and better results each year, they still cannot catch up with the multinational companies spending millions of dollars on development and advertising, thanks to their financial position.
    Finally we can state that choosing the appropriate variety for our needs and possibilities of land and machinery is of great importance in order to reach the best results we can.

  • Examination of the Nutrient and Water Utilization of Different Corn Genotypes in the Hajdúság
    55-59
    Views:
    143

    The research was set up on chernozem soil at the Látókép MÉK research area of the University of Debrecen in Hungary. We examined the following factors of the hybrid P9494, P9578, PR37N01 and PR37M81 in 2013.Yield, yield production per 1 kg fertilizer, water utilization and nutrient reaction. We found that the best yield results were achieved at level N120+PK in case of hybrid P9494 (17 132 kg ha-1) P9578 (16 838 kg ha-1) and PR37N01 (17 476 kg ha-1) and at level N150+PK for hybrid PR37M81 (16 754 kg ha-1). Results of yield per 1 kg NPK studies indicate that the most intense yield growth occurred at level N30+PK compared to the control treatment. This means that yield production per 1 kg NPK was 39.2 kg kg-1 in the case of hybrid P9494, 54.2 kg kg-1 in the case of P9578, 17.6 kg kg-1 for PR37N01 and 44.2 kg kg-1 in the case of PR37M81. After comparing corn hybrids’ water utilization, our conclusion was that the control treatment achieved the worst results in the case of each hybrid (P9494: 20.8 kg mm-1, P9578: 21.0 kg mm-1, PR37N01: 26.2 kg mm-1, PR37M81: 19.5 kg mm-1). For hybrid P9494, P9578 and P37N01, the best water utilization results were measured at level N120+PK (31.5 kg mm-1, 31,0 kg mm-1 and 32.1 kg mm-1), while PR37M81 reached the highest values at level N150+PK (30.8 kg mm-1). We determined the hybrids’ nutrient reaction and its optimum fertilizer values. The best nutrient reaction results were achieved by hybrid PR37N01, while that of hybrid PR37M81 proved to be the weakest.

  • Sensitivity of maize hybrids to common smut under field artificial inoculation conditions
    25-28
    Views:
    188

    Common smut disease of maize is one of the most frequent diseases of crop. In the last decades the importance of disease has decreased in feeding maize production, however its importance increasing again nowadays, especially at sweet maize hybrids. The aims of this work was to find hybrids possess of resistance, and to evaluate which ones are more or less susceptible under field artificial inoculation circumstances. Among feeding maizes the less susceptible hybrid was ‘P9578’, and the most susceptible ’NK Columbia’ hybrid, and differences in cob infection between them was significant (8.8%). At sweet corn hybrids the less susceptible was ’Prelude’, while the most susceptible was ’Jumbo’ with very high significant 74.6% differences.

  • Production of corn in Serbia in the light of climate change
    305-322
    Views:
    191

    This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent research by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid.

  • Analysis of the plant physiological effects of late, artificial corn smut infestation using remote sensing methods
    31-35
    Views:
    112

    In Hungary, corn is also infected by several important pathogens. In this experiment, we analysed the plant physiological effects of artificial late cron smut infestation using remote sensing methods under field conditions We examined the experimental area from which the data comes from with a DJI Phantom 4 Multispectral Drone NDVI and NDRE indices were calculated and analyzed in GIS programs. Individuals treated with a higher dose remained much greener than the untreated control. They also showed significant differences within the indices used.

  • Analysis methods of quality and traceability for honey
    25-32
    Views:
    139

    Honey is our essential food since ancient times. Thanks to the excellent dietetic and medical features, it has an important function in our nourishment. In Hungary about 25.000 tons of honey are produced each year. Most of the produce, about 80% is exported to different countries of the world. Hungarian types of honey have excellent quality. Through exporting, the prestige and demand of Hungarian honey can be increased. In recent years the adulteration of honey caused many damages to producers and traders. The adulteration of honey is not easy to prove. Thereinafter, we represent several methods, such as oligosaccharide analysis or 13C/12C isotopic ratio analysis, which can identify the artificial substances of honey (for example: corn syrup, high fructose corn syrup) or can help to determine the ratio by which original honey can be identified. 

  • A tárolási feltételek hatása a kukorica Fusarium fertőzöttségére és toxin szennyezettségére
    28-32
    Views:
    195

    Corn samples harvested in 1997, 1998 and 1999 from different soil types were stored at different conditions (temperature, moisture content, state of kernels) for six months. The Fusarium contamination was examined by plate dilution method and the amount of mycotoxins (F-2, T-2, HT-2, DON, DAS) were determined applying HPLC method immediately after harvesting and in the third and sixth month of storage. The aim of our study was to find correlation between the ecological factors, storage conditions and the examined parameters mentioned above, as well as to prove them statistically. According to the examinations carried out after harvesting we could state that the soil type had no effect on the parameters. Analysing the effect of the years we found considerable differences. The Fusarium infection of corn samples in 1998, while the toxin contamination in 1999 was the highest. The results of storage experiment show that year (number of microscopic fungi, F-2, T-2, HT-2, DAS and total toxin content) and moisture content of kernels (F-2, T-2, and total toxin content) have a significant effect on the examined parameters. We could prove the effect of temperature on the T-2 content (samples with natural moisture content) and DON content (samples with 14% moisture content). Higher values were found at higher temperature storage. The ratio of damaged kernels influenced the DON concentration in the non- wetted samples and the number of microscopic fungi in the wetted samples.

  • Evaluation of the role of common vetch (Vicia sativa L.) green manure in crop rotations
    161-171
    Views:
    131

    Common vetch (Vicia sativa L.) is an annual legume, grown as green manure provide rapid soil cover, can increase soil moisture and organic matter content and reduce soil erosion during fall. During the fallow period, legumes grown as catch crops are known by releasing large amounts of mineral nitrogen (N) for the subsequent crop. By taking advantage of these benefits, it is possible to increase the yield of the next crop in an environmentally friendly and sustainable way. The goal of this study was to determine the value of common vetch as a green manure, considering its effect on soil conditions and the yield of next crops. We examined three different common vetch seed rate as a green manure in a crop rotation with triticale, oat and corn. Next to the green manured treatments, we used fertilized and bare fallow control treatment for comparison. In our study we evaluated the aboveground biomass weight of spring vetch green manure and its effect on the moisture content of the soil. We examined the green manure’s effect on the next crops plant height and yield. We found that the moisture content of the green manured plots was significantly higher during summer drought. On the green manured plots, 37.9% higher triticale yield, 50% higher oat yield and 44% higher corn yield were measured compared to the control plots. The insertion of spring vetch green manuring into crop rotations could be a good alternative to sustainable nutrient replenishment methods. It can be used to reduce the input needs of farming, reduce carbon footprint, contribute to the protection of soils and increase the organic matter content of the soil.

  • The effect of hybrid, nutrient-supply and irrigation on the grain moisture content at harvest and the starch-content of maize (Zea mays L.)
    89-95
    Views:
    102

    Maize is a worldwide dominant plant. According to nowadays plant production principles it is important to investigate and optimize the site-specific nutrient-supply and other production factors, such as hybrid and irrigation, in the case of this plant as well.
    At the Research Institute of the University of Debrecen, Center of Agricultural Sciences and Engineering, at Látókép the effect of nutrient-supply and irrigation on the quantity and quality parameters of different hybrids were investigated in a small plot long-term field experiment. In this paper we introduce the results regarding the corn moisture-content and the starch content of the yield.
    We have chosen three maize hybrids – that have been bread in Martonvásár – for our investigations. The effect of macronutrients is investigated in this experiment on five levels. The half of the experimental area can be irrigated during the vegetation period – whenever it is needed – by linear irrigation equipment, but on the other half only the water amount originating from the precipitation can be used by plants.
    In the year 2008 the hybrid affected the grain moisture content at P=0.1% level, while nutrient-supply had an effect at P=10% significance level. We haven’t revealed either any effect of irrigation or of interrelationship between production factors. It can be stated that there are differences between the hybrids on each nutrient-supply and on both irrigation levels. The grain moisture content increased parallel to the longer vegetation
    periods.
    The starch content of maize is mostly affected by the hybrid,
    so on P=0.1% significance level. Regarding our results, it can be
    stated, that the starch content shows a decreasing tendency
    parallel to the longer vegetation periods.

  • Evaluating of soil sulphur forms changes in long-term field experiments of Látókép
    71-76
    Views:
    152

    The aim of this work was to evaluate the changes of different sulphur forms (soluble, adsorbed) in chernozem soil in a long-term field experiment supplied with increasing doses of NPK fertilizers for a long time. In addition, other objective of this study included the examination of the applicability of recommended extractants of the different sulphate fraction in Hungarian soils. A long-term field experiment was established at the Research Station of Látókép of the University of Debrecen in 1984. In addition to control, two levels of NPK fertilizer doses have been used with irrigated and non-irrigated variants. Winter wheat and corn were cropped in a crop rotation on plots. Soil samples were collected in three different development stages of winter wheat, at the stage of stem elongation (April), flowering (May) and ripening (June of 2018) from the topsoil (0–20 cm) of experiment plots. Water-soluble inorganic sulphate was extracted with 0.01M CaCl2 solutions. The soluble plus adsorbed sulphate was extracted with 0.016M KH2PO4 solution. Sulphate was measured by turbidimetric method. 0.01M CaCl2-SO42— ranged between 0.293–1.896 mg kg-1 and the 0.016 M KH2PO4-SO42- varied between 5.087–10.261 mg kg-1. The values of KH2PO4 SO42- was higher than that of CaCl2-SO42-, because KH2PO4 extracted the adsorbed and soluble fractions of sulphate, while CaCl2 extracted the soluble sulphate fraction. The amount of absorbed sulphate was calculated by the differences of KH2PO4- SO4 and CaCl2-SO4. The KH2PO4 characterizes mainly the adsorbed sulphate fraction much more than the water-soluble fraction. KCl is the most widely used extractant for the determination of plant available sulphate content of soil in Hungary; therefore, KCl-SO42- fraction also was determined. The KCl-SO42- ranged between 0.328–2.152 mg kg-1. The CaCl2-SO42- and KCl-SO42- fractions were compared and based on Pearson's linear correlation, moderate correlation was established (r=0.511) between them. In all three extractant (0.01M CaCl2, 1M KCl, 0.016 M KH2PO4) higher sulphate fractions were measured in the fertilized plots where superphosphate had been supplied for ages until 2010. The arylsulphatase activity of soil also was determined and ranged between 9.284 and 26.860 µg p-nitrophenol g-1 h-1. The lowest value was observed in the treatment with highest NPK2 dose, both in irrigated and non-irrigated areas.

  • The effect of the plant density for the yield of the maize hybrids
    50-61
    Views:
    87

    In order to enchance the yield stability of maize, the effect of plant density on yields was studied on a typical meadow soil in Hajdúböszörmény between 2002-2004. In the plant density experiment, we used the method of Béla Győrffy. The plant densities applied therefore 20 to 100 thousand plants/ha by ten thousand scale. The application of fertilizer rates for the maize hibrids in every year were N: 110 P: 90 K: 120 kg/ha. We used a manual soiling-gun in the experiment. In every year we used plant protection techniques against monocotyledonous and dicotyledonous weeds. The harvest was done by hand. The facts were read by variancie analysis and linear regression analysis. The moisture and the temperatures were extreme in 2002, 2003, 2004. We have to mention defficiery of moisture in 2003 which is shown that the hot days number increased. After evaluating our findings we can conclude that most hybrids showed a significant correlation between increased plant density and the volume of yields. On the basis of the experiments we divided the hybrids into four groups: the first group included the hybrids suitable for increased plant density with a wide range of optimal density values; the second group included hybrids, which did not require high plant density, were capable of good individual performance and tended to grow several ears; the third group included flexible corn types, which grew longer ears in favourable years, thus yielded more; and the fourth group included the hybrids, which were sensitive to increased plant density and which showed a narrow range of optimal density values. Finally, plant density determines the yield; we have to consider optimal plant density intervals as well as optimal plant density, and we also have to place a high emphasis on the use of hybrid-specific technologies.

  • Saccharomyces cerevisiae growth kinetics study dairy byproduct
    169-172
    Views:
    167

    By guess, annual volume of milk whey is 185–190 million tons and this volume probably will increase next years. Whey has significant biochemical oxygen demand due to its high organic matter content so whey as sewage is one of the most pollutant by-products in the food industry. Apart from environmental pollution, benefit of several whey constituents for human health is another reason to utilize whey. Corn and potato, as well as the processing of milk in the food industry in large quantities of by-products generated by low cost, substantial quantities of starch and lactic acid, which are due to high biological oxygen demand are considered as hazardous waste. Some of them are destroyed sewage storage tanks, and those products are excellent substrates for the growth of microorganisms could be. The traditional nutrient solution optimization methods are solution and time-consuming and are not able to determine the real optimum because of the interaction of factors involved.

  • Effect of bacteria containing bio-fertilizer on Cd-tolerance of corn and sunflower seedlings in nutrient solution
    15-21
    Views:
    70

    Bio-fertilizers promote the nutrition uptake, firstly enhance the baring and mobility of nutrients, on the other hand biofertilizers elevate nutrient uptake in direct way. Although there are a lot of questions about their application in polluted soils. The  cadmium ion is easily collectable and also transportable inside plants. Thus the Cd can get into the food-chain causing public health problems. The cadmium treatment decreases the dry matter accumulation, and the intensity of photosynthesis at the experimental plants, while the treatments with bio-fertilizer increased these parameters. The cadmium accumulated in the roots, the transport to the shoots was low. We came to the conclusion, that –because of the different nutrient-uptake systemthe sunflower took up more cadmium. Using bacterium containing bio-fertilizer the toxic effect of cadmium was moderated. By our experimental results the use of Phylazonit is offered under contaminated conditions.

  • Examination of feral pigeon populations at animal breeding farms
    52-56
    Views:
    81

    In the course of our examination, we assessed biometric data that determine gender, we evaluated sexual activity, measured the nourishment and necropsies of two feral pigeon populations feeding and nesting at animal breeding farms. The changes in the body weight of the different genders were significant on both farms (p<0.05).
    The body weight and the crop volume of the birds were not significantly different at the examined farms.
    On both farms, the elemental food source of the birds was the fodder and corn kernels given to cattle, and was supplemented by that of the pigeons living at the Debrecen farm with food from surrounding farms and with other seeds (pea, millet, rye).
    By the examination of the genitals, the birds collected from the Nyírbátor farm showed sexual activity from the beginning of spring, and in the summertime decreasing activity is characteristic, while the pigeons from the Debrecen farm are only active from the summer months. In the course of the examinations in the Veterinary Institute of Debrecen, the birds proved to be free of parasites and the results of the Newcastle disease analysis were negative as well. The bacteriologic analyses showed a different proportion of E.coli, Pasteurella multicoda, haemolysing Staphylococcus bacteria at the two cattle farms. During the examinations for the statement of Salmonellas, this causative agent was stated only in case of birds that spend nights and nested in the town, which allude to human origin. We demonstrated Eimeria oocysts during the parasitological examination of the fecal samples in 5 cases at the Debrecen, and in 1 case at the Nyírbátor farm.

  • Possible alternatives in crop nutrition
    109-112
    Views:
    92

    The protection of the environment is our common task. All pollution that exposes our soils, plants or the environment – as taken in any proper or extended sense – will appear sooner or later in the food chain and in human beings who are on the top of the food-chain pyramid. The aim of our work is to give a brief overview of the effects of selected industrial wastes on the physiological parameters of corn plants. Sewage sludge and lime sludge were examined. These materials contain lots of useful element for plants (e.g. iron, phosphorus, potassium, zinc). However, their aluminum, chrome and lithium contents are also considerable. The element contents in sewage sludge and the filtrates of lime sludge, as well as the dry matter accumulation and relative chlorophyll contents, were measured. The disadvantageous and advantageous physiological effects of the examined materials were confirmed. The compensation effect of the environment is excluded; however, the neutralization of environmental impacts is not infinite under natural circumstances.

  • The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
    39-49
    Views:
    90

    Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
    The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
    In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
    In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.

  • Detailed specification of the steps of dry milling ethanol production
    123-126
    Views:
    102

    Durring the 2011 year I was given the possibilty to study in Indiana, USA for 5 months with the help of the Bloomington fellowship, and had the chance to study the bioethanol production in the given state. I focused mainly on the details of corn based dry milling large scale bioethanol production. The dry milling process is a relatively common production mode in the USA. In the coure of my research I tried to compare and to highlite the advantages of the dry milling process contrasted with the wet milling bioethanol production.

  • Study of effects on quality of different wheat flour fraction
    123-129
    Views:
    96

    Wheat is one of the most important cereals in the world and the bread made of its flour belongs to the everyday life of human mankind.
    The Hungarian standard relating to the laboratory production of wheat flour (MSZ 6367/9-1989) does not mention the type of laboratory mill used for milling, and it only builds up some general criteria, such as: the laboratory mill should be provided with four differently nicked barrels, a sieve with appropriate hole sizes, and also with the separated collections of the pilot flour and the bran. Our study was started at this point and the answers for the following questions were aimed to be found: do the flour patterns studied and produced with different grinding and sieving
    techniques, widely used in laboratory mills of the same wheat pattern show any alterations after the impact of the formula production as regards chemical constitutions and reologic parameters. Various flours and whole grains of the wheat patterns sieved with different particle sizes were studied in this experiment. In producing this pattern two different mill types of FQC 109 and CHOPIN CD 1 as well as two different grinder types such as PERTEN 3100 and type of RETSCH 200 were applied. There were 3 different corn sizes of 160; 250; 800 μms used in the partition of the fractions. To study the differences the following  measurements were conducted: dry matter, ash, protein content, wet gluten content, gluten index, gluten expansiveness, farinographic value, falling number and amilographic rate.
    The results this research confirm that the quality of wheat flour can be modified by different methods of pattern production. In all cases the differences can be explained by the flour-bran ratio, and in some of the cases the higher germ content of the fractions also played a role. The results show differences between the various types of mills and grinders, too.