Search

Published After
Published Before

Search Results

  • Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
    56-61
    Views:
    396

    The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.

  • Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
    131-136
    Views:
    506

    The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
    7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments.

  • Economics of hail protection net installation in super intensive apple orchards
    27-35
    Views:
    230

    The main objective of this study was to determine and organize beneficial and detrimental effects of hail protection nets, and as far as possible to quantify their economic impact. The main factors were determined, through which hail protection nets can affect the costs and incomes of the production, and as their sum the economic result. Considering these factors together with the investment cost and the annual maintenance costs allows the economic evaluation of purchasing of hail protection nets. The analysis was carried out using a deterministic simulation model based on primary data collection from apple producing businesses. Installing hail protection nets as additional technological elements of intensive apple orchards can be concluded by all means as an economic investment – trough their protective effect. However, to achieve really favourable economic indicators, definitely bigger tree height is needed making possible the realisation of around 8.0 t ha-1 extra yield. The main root of this phenomena are obviously the extremely high investment costs of hail protection nets, which result in a large mass of fixed costs during the production period. Therefore the basic economic interest is reaching higher yields and thereby higher profits per unit area.

  • Basil (Ocimum basilicum L.) harvest and plant replacement methods in aquaponia
    91-98
    Views:
    384

    The aim of the study is to investigate the potential of basil leaf mass production under aquaponic conditions with different harvest and plant replacement methods. Aquaponics is a combination of soil-less crop production hydroponics and aquaculture and it is can use and clean the wastewater of intensive aquaculture systems. Three groups were established in the 6 units during the six-week harvest and seedling rotation cycles. Group 1 individuals remain in the units throughout the breeding season. Group 2 individuals were replaced every 12 weeks, while Group 3 individuals were replaced every six weeks, at the same time as harvest. Data from the experiment were analysed to determine how the harvest and replacement protocol of basil plants influences the amount of leaves harvested, the percentage of leaves harvested relative to the plant stem, and the changes in plant height, SPAD and NDVI during harvest and replacement. A continuously maintained and harvested healthy basil stock under aquaponic conditions can provide a consistent leaf mass all year round without the extra cost of replacing and producing seedlings.

  • Testing laboratory parameters of compost tea
    31-36
    Views:
    1000

    During the industrial production of broiler chicken, a large amount of manure is produced, of which easily contained nitrogen content (without pre-treatment) is released into the atmosphere as an air pollutant. In our experiments, we aimed to prepare compost tea, also known as water extract of compost, from pre-treated poultry manure in order to create a product can be utilized as liquid nutrient supply. The poultry manure source was the Baromfi-Coop Ltd. located in Nyírjákó, Hungary, where it was treated by composting. As a result of this pre-treatment of the poultry manure, its nutrient parameters improve and nitrogen is present in a form that is better utilized for plants. Furthermore, this product is suitable for further utilization and also can be the base material for a brand-new product. For this reason the effects of compost/water ratio, incubation time, low oxygen level, and extraction time on the parameters of the resulted product were studied in the frame of developing new soil-life enhancing microbial product, so-called compost tea.

    Chemical parameters of the compost used as base material strongly determined the properties of the resulted compost tea, especially the ratio of the various nitrogen forms, their concentration and the salt content. It was found that adding water at a higher rate that means 1/40 and 1/50 mixing ratios results in more cost-effective production. In the experiment the compost tea were held under oxygen-poor conditions, therefore pH of the extractions decreased, which influenced the quality and quantity of their nutrient content.

  • Evaluation of harvesting technology of vineyard pruning based on a Mátra wine region case study
    91-100
    Views:
    228

    Wineyard pruning utilization for energy purpose is not only a theoretical possibility, the machine background has also been developed. Economic- and environmental experimentations has made by specialists and they seek to developed the best practice in logistics suitable for local conditions and they propagate the results for the potential users. Nevertheless, the utilization does not seem to be typical in Hungary and some other wine-grower countries. For example, in Hungary the additional energy from vineyard pruning eventuates – tillage, nutrient supply; – phy+tosanitary, environmental pollution; – energy management and economic questions.

    In Hungary the most important problem is practice of the vineyard pruning utilization were mentioned by the users is the establishment of collection system and the high logistic costs as Marczinkó (2007) experiences confirm this. As I experienced in practice, the winegrowers are uninterested in utilization. Most of them burn it at the end of the vineyard in many cases without considering of the relevant statutory prohibition.

    As my own several years expriment shows at Mátra wine region it is not the technical background which causes the failure. We can use effectively balers or chippers for collection. The cost of chipping is 14 535–27 000 Ft per hectars with the introduced technologies on Mátra wine region. The cost of 1 GJ of heat production is 606–1125 Ft. We can substitute the fuel with vineyard pruning and it means approximately 115 000 Ft saving for a family household per year.

  • Economicalness of self-propelled work platforms in superintensive apple plantations
    91-98
    Views:
    234

    The main goal of this study was to determine whether the use of work platforms in super intensive apple orchards in order to reduce production costs and enhance work area performance under Hungarian circumstances an economic investment is. The analysis was carried out using a deterministic simulation model based on primary data collection from apple producing businesses. The results show that work platforms have remarkable economic advantage in case of operations with high machine work expenditures or where they significantly improve the area performance of manual labour. The former was due to the much lower operating costs of work platforms compared to tractors, while the latter comes clear from reduction of manual labour input per hectare. The greatest economic advantage of work platforms occurs in case of harvesting and pruning, but in case of other operations they have no significant cost advantage. They main economic disadvantage is, however, that apple breaks more when harvesting with work platforms, i.e. picking quality deteriorates significantly. It can be concluded, that purchase of work platforms cannot be considered economic investment under Hungarian circumstances. It might be economic, utilised on maximum area (ca. 30 hectares) by certain companies in special cases, but in most cases has no favourable payback conditions.

  • Methodological basis of Black Locust (Robinia pseudoacacia L.) regeneration by coppicing: case studies
    15-22
    Views:
    235

    In countries struggling with timber shortage, including Hungary, fast-growing tree species such as black locust (Robinia pseudoacacia L.) offer the possibility of meeting an increasing proportion of timber demand from domestic sources through more efficient use of cultivation opportunities. Coppice forest management is the oldest, but also the simplest and, in most cases, the most cost-effective method of operation. In this paper, we present the timber production criteria for the coppice regeneration method, including the accelerated determination of the timber stock of black locust parent stands through case studies.

  • Economic Aspects of Rural Tourism
    55-71
    Views:
    214

    necessary to ensure the livelihoods of those leaving the agricultural sector and to supplement the incomes of those working in agriculture. I research rural development in four settlements in Hajdú-Bihar County, in Balmazújváros, Hortobágy, Tiszacsege and Egyek, all bordering Hortobágy National Park.
    There are many alternative income sources in settlements in the Hortobágy area, such as organic farming, production herbs, hungaricums, small animals and arts and crafts, as well as rural tourism. Rural tourism is not for subsistence, but a supplementary income source, mainly available during the summer time. I made a survey of rural hosts in the four examined settlements, and according to my results, I constructed a model reflecting the cost-benefit relation, as well as the payment period conditions of rural tourism. I am going to show whether it is worth dealing with rural tourism, and if yes, under what conditions. Rural tourism contributes to the maintenance of rural modes of living, in this way it has significant cultural, economic, ecological and social aspects, as well. It is crucial for settlements to create the appropriate conditions needed for joining rural tourism, if it is worth joining at all, and to realise investments for all these. Rural tourism has strict requirements for the levels of environment, infrastructure and services. Studying the Western-European practices, Hungary is lagged behind in the conditions of rural tourism and rural hosts have done their activities mainly out of necessity and not to maintain traditions. Rural tourism may result in success only by co-operation and over the long-run.

  • Comparative analysis on the fertiliser responses of Martonvásár maize hybrids in long-term experiments
    111-117
    Views:
    233

    The results of experiments carried out in the Agricultural Research Institute of the Hungarian Academy of Sciences clearly show that in the case of hybrids grown in a monoculture greater fertiliser responses can be achieved with increasing rates of N fertiliser than in crop rotations. In the monoculture experiment the parameters investigated reached their maximum values at a rate of 240 kg/ha N fertiliser, with the exception of 1000-kernel mass and starch content. In both cases the starch content was highest in the untreated control, gradually declining as the N rates increased. Among the parameters recorded in the crop rotation, the values of the dry grain yield, the 1000-kernel mass, the protein yield and the starch yield were greatest at the 160 kg/ha N fertiliser rate, exhibiting a decrease at 240 kg/ha. Maximum values for the protein content and SPAD index were recorded at the highest N rate. It is important to note, however, that although the N treatments caused significant differences compared to the untreated control, the differences between the N treatments were not significant.
    In the given experimental year the values achieved for the untreated control in the crop rotation could only be achieved in the monoculture experiment at a fertiliser rate of 160 kg/ha N, indicating that N fertiliser rates could be reduced using a satisfactory crop sequence, which could be beneficial from the point of view of environmental pollution, crop protection and cost reduction.
    The weather in 2006 was favourable for maize production, allowing comparative analysis to be made of the genetically determined traits of the hybrids. Among the three hybrids grown in the monoculture experiment, Maraton produced the best yield, giving maximum values of the parameters tested at a fertiliser rate of 240 kg/ha N. The poorest results were recorded for Mv 277, which could be attributed to the fact that the hybrid belongs to the FAO 200 maturity group, while the other hybrids had higher FAO numbers. Maraton also gave the highest yields in the crop rotation experiment at the 160 kg/ha N level. All three hybrids were found to make excellent use of the natural nutrient content of the soil.
    It was proved that the protein content of maize hybrids can only be slightly improved by N fertilisation, as this trait is genetically coded, while the starch content depends to the greatest extent on the ecological factors experienced during the growing season.

  • Use of Forecasting Methods in Price Analyses
    240-247
    Views:
    215

    The cost of products changes not only seasonally in relation to time, but also follows a hectic motion. It is necessary for the farmers to calculate in advance the size of the future income, which is one of the basic conditions of the economical production. Many authors have examined the change of the prices but since the tendency of the change of the prices can be only rarely observed purely by itself, therefore it is difficult to separate it. During my research I examined how the monthly prices of corn and the monthly buying prices of pigs for slaughter have changed since 1991 and how much their future value will be. I examined how much is the α factor wich gives the minimal residual variation in case of the Brownian dual exponential smoothing and the corrected dual exponential smoothing and how will the future (2002) prices, which were in this way calculated, change compared to their real market prices.

  • The use of biogas in energetics
    41-46
    Views:
    205

    In our study we examine the technical facilities of biogas production in the economic environment of a given region. The region can be considered as typical: it has animal farms, a poultry-processing plant with the characteristic problems of environment load and by-product handling. Biogas can be used for energetic purposes, and, in large scale, it can be sold as electric energy. The heat coming from the engine and the generator can be collected in heat exchangers and can be used for preparing hot water and for heating. One third of the gained energy is electric, two thirds are heat. The aim of the local owner and the economic management is to increase the rate of cost-effectiveness in general. We examined the tecnnical and economic conditions of establishing a biogas plant (using data of an existing pigfarm). We planned the biogas plant and calculated the expected investment and operational costs and return.

  • The examination of the profit-making capacity of the wooden chip-based large-scale product path
    21-26
    Views:
    257

    Heating with wooden chips would provide a significantly cheaper energy production alternative for the local governments in heating their facilities and in district heating as well. The raw material should be available in the appropriate quality, quantity and at the right time. This type of heating requires the well-organized and joint work of the forestry, transporting, processing and receiving plants. This activity might be realized in the form of non-profit clusters. In order not to suffer any losses, the participants of the product path should carry out a very careful planning regarding the factors appearing in heating with wood but missing from gas heating. One such critical element is the transportation distance which might make the basically cost-efficient wooden chip-based heating process significantly more expensive.

    One of the main findings of my paper is that the transportation distance should be at most 23 kilometers for the wooden chips to be worth (economical) using against gas. From the viewpoint of practical use, this can be interpreted as the distance between the forestry and heatproducing units. By determining the constant and varying costs of transporting and chopping and from calculating the initial contribution, I concluded that the profit-making capacity of the product path would be sufficient for an energy-related investment. According to my calculations, by remaining within the economical transporting distance of 23 kilometers, such long-term savings might be achieved compared to gas heating which would partly cover the establishment of a biomass-based power plant or heating plant.

  • Effect of feeds with different crude fiber content on the performance of meat goose
    5-8
    Views:
    813

    In the last 50 years, poultry meat production has increased dynamically. The role of crude fiber content in feed is unclear based on a small amount of literature about goose feeding.

    The aim of theis experiment was to determine how various crude fiber content (55; 60; 65g crude fiber/kg feed) influences the performance of meat geese in the second phase of the rearing period. 150 goslings (3 treatments, 5 cages/treatment, 10 birds/cage) were included in the test. The experiment started and finished at the age of 21st and 63rd  day, respectively.

    The obtained results suggest that various crude fiber content did not influence the performance of meat geese significantly; however, a feed of 55g crude fiber/kg resulted in better fattening results (final body weight, body weight gain, specific feed protein and energy conversion rate). In addition, compound feed of 65g crude fiber/kg proved more favourable with respect to cost-efficiency. Based on the obtained results so far, further models and farm experiments are required.

  • The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
    203-210
    Views:
    387

    The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
    We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid.