Keresés

Keresési eredmények

• Efficiency of the Machining Process of Circular Shapes by Electrical Discharge Technology

  53-61

  Straka Ľuboslav

  Kuchta Patrik

  Megtekintések száma:

  76

  Due to its high machining precision, EDM technology is nowadays very important in the production of high-precision parts for various industries. The high precision of the machined surface in combination with the ability to machine circular surfaces brings, in addition to several advantages, some negatives. The most significant negative of this machining technology is the relatively low productivity as well as the overall production efficiency. The latter is affected by many accompanying phenomena. The main accompanying phenomenon that contributes to the decline in the overall economic efficiency of EDM is the microgeometry errors that occur due to the non-homogeneity of the EDM process. Another accompanying negative phenomenon is the geometric accuracy errors of the machined surface, as a consequence of systematic destruction of the wire tool electrode, faulty interpolation in its guidance, and, last but not least, its vibration. These aspects consequently lead to the requirement for multiple applications of additional finishing cuts, which significantly reduces the overall economic efficiency of the machining process. Therefore, the experimental research aimed to search for options that can effectively help to achieve higher productivity but especially the overall economic efficiency of the machining process.

• Analysis of Disinfection Technologies that can Increase the Efficiency of Indoor Logistics Processes, which has been Reduced due to the COVID Pandemic

  62-71

  Boldizsár Adrienn

  Tóth Ákos

  Török Erika

  Pásztor Attila

  Megtekintések száma:

  131

  As a result of the Coronavirus, both supply chain and internal logistics processes at factories have changed a lot. In many areas, the effectiveness of the logistics processes has declined because of the restrictions implemented against the virus. The study lists some adverse effects where logistics processes had to be modified due to the changing and protection measures against or negative effects of the virus. The authors also argue that these restrictions decreased the efficiency of logistics processes and workers' productivity. One option to increase the logistics sector's efficiency is to use air purification technologies, like the ones studied in this paper: UV-C, Bioxygen® or plasma-ion decontamination technologies. These disinfection processes can create a safe indoor environment. The authors analyse the examined technologies with SWOT analysis. The analysis results demonstrate which disinfection application is the most beneficial to help in improving indoor air quality for logistics processes.

• Autóipari termelő vállalat gyártási folyamatának optimalizálása lean eszközökkel

  81-89

  Nyárádi Anita

  Kocsi Balázs

  Tornyos I.

  Budai István

  Megtekintések száma:

  343

  A lean szemléletű gyártás jelentős szerepet játszik az ipari környezetben, eszközeit napi tevékenységként használják az autóiparban árcsökkentés és termelékenység javítása céljából. A kutatásomban részt vevő nyugatdunántúli autóipari termelő vállalat detektált problémáinak megoldására kitűzött célok elérése érdekében lean eszközöket alkalmaztam, amelyekkel a folyamat teljes átfutási költségének csökkenését kívánjuk elérni. Ennek eléréshez műszakcsökkentést tűztünk ki célul, amely által emberi erőforrás- és előállítási költség megtakarí tás válik lehetővé, csökkentve a teljes folyamat átfutási költségét. A műszakcsökkentést a gépek teljes körű hatékonyságának (OEE) növelésével kívánjuk elérni, amely érték növeléséhez a veszteségek minimum 50%-os csökkentése szükséges. Ezt a célt az 5s módszer bevezetésével, Poka-yoke használatával valamint az 5s fejlesztés harmadik lépésénél bevezetett karbantartásokkal kívánunk elérni.

• Impact of Physical Properties of Workpiece Material on Material Removal Rate at EDM

  230-237

  Straka Luboslav

  Dittrich Gabriel

  Megtekintések száma:

  111

  The volume stock removal from the workpiece during the EDM is one of the important parameters that characterize the productivity of the electro-erosion process itself. Therefore, in terms of the economic efficiency of the electro-erosion process, it is appropriate that the value of the MRR parameter is as high as possible. The paper describes the results of experimental research to identify the extent of influence of the physical properties of the workpiece material on the workpiece material removal rate at EDM. The experiments were carried out using an Aggregron Hyperspark 3 electro-erosion machine on selected tool steels. As a tool electrode material for experimental purposes, graphite with the designation EX-60 was chosen because of its practical advantages.