Search
Search Results
-
Numerical Modelling and Simulation of Sheet Metal Forming Process
1-6.Views:163Simulation and modelling of sheet metal forming process are well common today in different industries (automotive, aerospace) and several research centers regarding its huge impact for both on production and reliability of the lifecycle of the equipment, and the quality of the product. However, to obtain the best configuration possible with the inputs parameters to achieve high level of production and increasing the durability of the tools needs some extra methods for the optimization for this problem using mostly finite element method cooperated with iterative algorithms based on Artificial Neural Network (ANN) [1]. Whereas this research is focused on modelling of stamping process of stainless steel AISI 304 to investigate to formability of the material, and studying the influence of the friction factor on the quality of the product as well the energy required for each set configuration.
-
Generative Design of a Mechanical Pedal
48-58Views:847Nowadays, there are various tools that support the initial stages of design available to use for engineers, the traditional Computer-Aided Design (CAD) has been implemented in the engineering components design and replaced manual drafting. However, with the advances and the rapid technology development, new trends emerged to cope with this evolution, namely, Generative Design, Topology Optimization, and Generative Engineering Design. The method is based on numerical algorithms that generate a variety of design and modelling options based on the criteria and constraints set by the designer to allow further design exploration. Proposed in this paper is an implementation of the generative design of a mechanical pedal with further finite element analysis.
-
Fundamental Considerations for Finite Element Modelling of Rubber Material Tensile Test
7-13Views:497Aim of this research is to get familiar with the fundamental considerations for finite element modelling of rubber’s tensile test. Hyperelastic materials such as rubber are widely used in a variety of industries ranging from tire to aerospace for various structural applications. The most important feature of rubbers is their ability to experience substantial deformation under small loads and maintain initial configuration without noticeable permanent deformation after removal of the load.
-
Designing, Modelling and Analysis of Straight Turning Tool Geometry
11-16.Views:140We execute the planning, modelling and examination of straight turning tool geometry with the help of a software in the modelling space. Our aim is to create a programme that – given some lengths and angles – calculates the corresponding geometry. It establishes that as a wireframe model in a file format that is easily transmittable to the CAD softwares of today, so any additional changes can be done there. An optimal geometry can be defined for the best possible chipping conditions using finite element simulation and with given technological parameters and material quality standard.
-
Simulation of production processes with Plant Simulation
10-16Views:181This article presents the modelling of interconnected companies’ logistic processes with Tecnomatix Plant Simulation by Siemens. It has two main parts. The first contains the details of recognition including simulation. The second part presents the modelling with Tecnomatix Plant Simulation. My publication is supported by the EFOP3.6.1-16-2016-00022 project. The project is co-financed by the European Union and the European Social Fund.
-
International Coffee Trade Network Analysis
393-404Views:275Coffee is one of the most consumed beverages in the world. It is the second largest traded commodity after petroleum. It is crucial for the economy and politics of many developing countries, as its cultivation, processing, trade, transportation and distribution create jobs for millions of people. The analysis of network connections and structures became popular in the field of sociology, whereby the term Social Network Analysis (SNA) is derived. The method is well suited for the complex examination and modelling of composite social structures. The social network is defined as a finite set of social actors and the relationships between them. Modelling of complex networks now apply in countless locations, from social media through the pharmaceutical industry to economic and commercial processes. Our study examines changes in international coffee trade through a network analysis. Introducing the complex networks investigate by our, highlighting major changes in international coffee trade.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:151The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Generative Design of Articulated Rod of Radial Engine
36-47Views:482The constant need for improvement drives humans to look for the best possible option in every field. Computer Aided Design (CAD) is no exception, to follow the best method of designing a product and finalizing it, researchers came up with an idea to generate multiple designs using fixed input values and finalizing the most appropriate one. The objective is achieved using an iterative design process based on algorithms by a specific software. Generative design introduces a new experience based on the Integration of machine dynamics in the manufacturing of objects and about experience. In this work generative design method was investigated on an articulated rod, one of the most important components of the rotary engine, to effectively improve the overall working performance of the engine and enhance its performance by decreasing its mass. Since fuel consumption by the machine can be greatly reduced by lowering the mass, so the goal is to minimize the weight of the rod while mechanical characteristics have to be within the acceptable values. Also, finite element analysis (FEA) was investigated on the part as to ensure the reliability of the rod before and after optimization.
-
Simulation modelling in the sizing of city logistics systems – a study for concentrated delivery points
1-11Views:114Nowadays, urban freight traffic is causing significant noise and air pollution, so it is in the focus of green logistics developments, both in technology and system organization. Based on experiences within city logistics, significant problems are caused by the so-called concentrated sets of delivery points, where there are several delivery points with heavy freight traffic in a relatively small area. Since the summer of 2015, we collected lots of data about stores of these delivery points to support the modelling and the simulation of the new green solutions for the examined city logistics systems. Based on our results we can say, there are significant savings in these systems, so it is worth to deal with developing new, gateway-concept-based and consolidation-based solutions.
-
Some Aspects to the Rehabilitation of the Vernacular Adobe Architecture
1-15Views:216In this paper, we are dealing with the heat-technical modeling, life cycle assessment and the conservation of the vernacular adobe wall house. One of our investigations is directed to the seasonal equalizing property of this wall structure. The reason of this choice of this topic can be found in the fact, that in the old Hungarian folk house construction, the abode wall was popular and a significant fraction of the people living in the countryside are still inhabit these old houses. The Hungarian winter is cold and followed normally by sizzling hot summer. The adobe wall construction is perfect for the local climatic conditions. Due to the on-going global warming up, the ecological importance of these wall constructions is becoming more prominent. Most of these adobe wall constructed houses are already under preservation order, due to their ecological significance and also because they are part of our culture heritage. Their conservation and maintenance problems are briefly described in the paper, too.
-
Building Information Modelling: Present realities and Future possibilities
377-394Views:136BIM (Building Information Modelling), a term that is drawing the attention worldwide in the construction industry and governments, is a complex concept that involves management effort, tools and applications for enhancing information flow and therefore productivity for projects. This article pretends to briefly explain BIM, its advantages, challenges and potentialities while considering the current adoption of the concept in some countries. Furthermore, the article includes suggestions for the implementation of BIM in an organization as well as in projects and a list with some useful tools for this purpose.
-
Applicability of Optimization Methods in the Design of Automotive Rubber Products
358-363Views:154Size, shape or topology optimization are widely used to fulfil the requirements in the design process of rubber products. In many cases, the shape of the product is very complex and comes into contact with other components during operation. It is commonly subjected to large deformation for which the rubber shows strongly nonlinear behaviour. For this complex problem analytical solution is not available, thus finite element method could be used in which the analysis running is a time consuming process. The object of my research is to compare the efficiency and computational cost of different optimization algorithms. This article focuses on the applicability of various optimization methods in the field of automotive rubber goods. Direct search optimization and surrogate model optimization methods will be introduced.
-
Vehicle Modelling and Simulation in Simulink
260-265Views:417In this paper a vehicle dynamics model is presented, which is an example that contains all the necessary aspects of making a decent vehicle model. Several examples show the use of such a model: basic vehicle dynamics phenomena can be recognized with the simulation of a detailed vehicle model. We are dealing with the connection between downforce and under/oversteer in this paper. In addition, the use of numerical simulations in the field of control systems is pointed out by an example of simulating an ABS control for the vehicle.
-
Review of Modern Vehicle Powertrains and Their Modelling and Simulation in MATLAB/Simulink
232-250Views:1096Thanks to technological advances and environmental standards, as well as changing usage patterns, road vehicles are constantly developing. Electric and hybrid vehicles are playing an increasingly important role in today’s road transport. The most significant changes are probably in the powertrain of vehicles. The efficiency of internal combustion engines increases while their emissions continue to decline. In addition, high performance electric motors, batteries and even fuel cells play an increasingly important role in hybrid and electric vehicles. In this publication, we review the drive systems of current modern vehicles and the types and characteristics of their major components. We also review the available models and computer programs for their simulation, focusing mainly on MATLAB/Simulink applications. Based on this, we can develop our own models and simulation programs which will help us to perform different driving dynamics simulations and to compare the performance, dynamic and energetic characteristics of these powertrains and their components to each other.
-
Business Process Development with the Application of Simulation Technique
109-118Views:169The object of our work to increase production efficiency with the use of cost-efficient development tools at a Hungarian small enterprise. We apply data gathering techniques besides process modelling and diagnostic methods to reduce the total process time of the assembly process so as to induce cost reduction in the production. In this respect we investigate and rank root causes of wastes by cost-effective process development tools, like timebased FMEA (failure mode and effects analysis) as well as the 5 whys method. With the use of Monte-Carlo simulation companies can evaluate the change in the process, therefore, they can decide whether they want to carry out corrective measures or not. The accomplished changes can generate increasing competitive edge in the long run.
-
The Impact of Optical Character Recognition Artificial Intelligence on the Labour Market
9-16Views:373Because of present day information technology, there is neither need to plant complicated computers for more millions price if we would like to process and store big amounts of data, nor modelling them. The microprocessors and CPUs produced nowadays by that kind of technology and calculating capacity could not have been imagined 10 years before. We can store, process and display more and more data. In addition to this level of data processing capacity, programs and applications using machine learning are also gaining ground. During machine learning, biologically inspired simulations are performed by using artificial neural networks to able to solve any kind of problems that can be solved by computers. The development of information technology is causing rapid and radical changes in technology, which require not only the digital adaptation of users, but also the adaptation of certain employment policy and labour market solutions. Artificial intelligence can fundamentally question individual labour law relations: in addition to reducing the living workforce, it forces new employee competencies. This is also indicated by the Supiot report published in 1998, the basic assumption of which was that the social and economic regulatory model on which labour law is based is in crisis.
-
Neural Network Based Enveloping Model of Agricultural Tyre
214-222Views:87The vibration properties of agricultural tractor’s tyres significantly influence its response in terms of the exposure of the human operator to mechanical vibrations, which is still one of the key problems in the design and exploitation of tractors. The behaviour of the tyre in this sense is significantly influenced by the mechanism ofgeometric filtering of the short-wavelength unevenness of the unprepared ground mostly encountered by tractor during in-field operations. Herein, this aspect of tyre behaviour was studied with tyre rolling quasistatically over singular obstacle. Based on experimental results, neural network based model of tyre enveloping behaviour was developed. Main model properties are high computational efficiency, simplicity regarding number of input quantities and absence of the need for explicit parametrization etc. Main shortcomings of modelling approach used are high developing effort, labour-intensive experimental preparations and lack of flexibility regarding tyre design and operating parameters
-
Calculations of Performance Losses for Automobile Vehicles
210-218Views:221Vehicle-energetic-models are used to analyze the performances and when a comprehensive structure is established even optimization could be done. For these kinds of models, the losses of the vehicles have to be known. These losses could significantly effect of the vehicle fuel consumption. From these losses the rolling resistance, drive elements and aerodynamic drag are discussed. This paper reviews some of the literatures that describes the calculation methods and gives us some idea about the degree of their value. Our further goals are to have an UpToDate loss coefficient dataset and calculation methods for further vehicle-energetic modelling.
-
Visual Analysis and Geometric Modeling of Metal Foams
89-92Views:114The development of an efficient procedure for 3D modelling and finite element simulation of metal foams
is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding
engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the
center of the research. The aim of this project is to analyze the related literature and to adapt the results may be
considered. -
Numerical Model Analysis of Myring–Savonius wind turbines
180-185Views:192Nowadays the importance of renewable energy is growing, and the utilization of the low wind energy potential is getting crucial. There are turbines with low and high tip speed ratio. Turbines with low tip speed ratio such as the Savonius wind turbine can generate adequate amount of torque at low wind velocities. These types of turbines are also called drag machines. The geometry of the blade can greatly influence the efficiency of the device. With Computational Fluid Dynamics (CFD) method, several optimizations can be done before the production. In our paper the Savonius wind turbine blade geometry was based on the so-called Myring equation. The primary objective of this paper was to increase the power coefficient by modelling the effect of the wind on the turbine blade. For the sake of simplicity, a 2D cross-sectional area was investigated in the simulation with ANSYS CFX 19.1.
-
Product Assembly Process Improvement of Agricultural Cultivator Trailers
59-62Views:93The aim of our paper is to increase production efficiency of a small and medium sized enterprise by
applying cost-effective process development tools. The existence of the firms depends on their business processes,
because optimally-organised process is a key in the run of business (business run) in a productive way. In order to
keep and grow the competitive edge with the competitions, firms must supervise their processes with constant
frequency, and if it is needed, procedures must be developed. In this case, company can resort to both human and
physical resources. Our experiment focused on the development of an assembly process at a small sized enterprise.
Applying process modelling techniques, and diagnostic procedures, and also data gathering methods we try to get to
define corrective actions, with which the whole lead time can be reduced by 50%. For investigate and rank waste we
use failure mode and effects analysis and 5 whys methods. -
Use of ANSYS Software for the Acetabular Cup Structure Analysis out of the Hip Implant
1-6.Views:358Modelling the hip implant has been one of the most important researches over the past few decades. In addition, using the ANSYS software for this purpose is well-known procedure to understand the real reaction of the hip implant parts during the daily life of the installed part. This study is to focus on the practical part of the use of ANSYS software to analyse the performance of the hip implant through the feature of structure analysis available in the ANSYS. The research applies the static loads behaviour only with the help of the static structural analysis to view the advantages and the disadvantages of every design, which helps us estimate the implant’s behaviour. The study investigates the optimization of the acetabular cup using the lattice optimization along with the infill option available in the ANSYS software in order to optimize the stress and the fixture of the cup inside the pelvis.
-
Fémhabstruktúrák elemzése és geometriai modellezése
145-152Views:145The development of an efficient procedure for 3D modelling and finite element simulation of metal foams is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the center of the research. The aim of this project is to analyze the related literature and to adapt the results may be considered
-
A numerikus számítások szerepe a műszaki modellekben
76-83Views:118Application of numerical methods and stochastic approach should have a bigger role in the Mathematics programme of the secondary schools. Studying economic and engineering problems leads to better understanding of the significance of mathematical models in practice. In our mini-course we introduce several topics related to mathematical modelling of systems and processes to present the applicability of mathematical calculation methods in the everyday life.
-
Vehicle dynamics modelling of an electric driven race car
106-114Views:138In the following we are presenting a vehicle dynamics simulation program developed in MATLAB environment. The program is capable of calculating the dynamics functions of a vehicle from its technical data. The program has been successfully applied for the optimization of the technical data of an electric driven race car that was designed and constructed at the Department of Mechanical Engineering of the University of Debrecen.
