Search
Search Results
-
Agrarian sector of Ukraine in the global world
57-60Views:111Characterization of Ukraine as a “bread basket” for the world have been done. In our study using database of State statistical service of Ukraine and FAO we showed changes of harvest areas and volume of production of cereals and protein-oil crops during this century.
As a result we showed that Ukraine has increased its share in the world gross harvest of cereals up to 2.17% and protein-oil crops up to 3.4%. Each economically active agrarian produced 22.6 tons of cereals and 3.5 tons of protein-oil crops, increasing this index in comparing to 2000 in 11 and 12 times accordingly.
Ukraine has a great potential for increasing crop production because of use genetic potential of varieties only for 60–70%. Here are shown changes in cattle, poultry breeding and dynamic of livestock production. We also included export of cereals and livestock production.
-
Examining reaction of sunflower genotypes on planting time on chernozem soil
93-99Views:109We studied the effect of planting time on plant pathological factors, leaf area index and yield production by applying various fungicid treatments on two different sunflower genotypes in 2013.
By delaying planting time, both the extent of Diaporthe, Alternaria and Phoma infections decreased. The differences between the volume of infections were significant in the case of the early and late sowing time results. The application of fungicide treatments induced a notable decrease in the extent of infections for all three pathogens examined. The LAI-values varied between 0.3 and 5.6 m2/m2 in 2013 depending on the hybrid, sowing time and treatment. Stocks planted at distinct times reached maximum leaf coverage at different times. The planting time and the fungicide treatment had a significant effect on the formation of the leaf area. In the case of average and late planting times, fungicide treatments elongated the preservation of the green leaf area.
With respect to the yield amount, average planting time (27 April, 2013) turned out to be optimal in 2013 (control – NK Ferti: 4.621 kg ha-1, PR64H42: 4.196 kg ha-1; double-treated: NK Ferti: 5.282 kg ha-1, PR64H42: 5.090 kg ha-1). Fungicide treatments resulted in significant yield growth in all cases during our research.
We applied Person correlation analysis to evaluate the hybrids’ sensibility to infections and our results varied in the case of Diaporthe and Phoma (r=-0.343*, -0.379**). Infections of the three pathogens were significantly reduced by delaying the planting time and applying fungicides. Late sown stocks preserved the green leaf area for a longer period. Besides, the application of the fungicide treatment and the hybrid itself also led to the preservation of the green leaf area. However, pathogens examined notably decreased the leaf area by the end of the growing year. The fungicide treatment had a remarkable effect on yield growth (r=0.603**). Furthermore, the presence of higher LAI-values in the period prior to August also induced higher yields.
-
Effects of the development of production factors on productivity
13-18Views:125In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.
The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.
-
Evaluation of egg quality parameters of two Hungarian ostrich populations
51-57Views:216The aim of our study was to evaluate the quality parameters, porosity and weight loss of eggs deriving from the two most significant ostrich farms in Hungary. Quality parameters included weight, length, width, shape index, egg volume, surface area, circumference and shell volume. The effect of storage conditions in both farms and the incubation technology on egg weight loss in farm “A” were also examined. The research objective was to impart a comprehensive knowledge on egg quality parameters of the main ostrich populations in Hungary and to compare the trios and the farms with each other and the international literature. We could reveal significant differences between trios in all egg quality traits. In conclusion, the shorter and the narrower the eggs were, the more spherical shape they had. Narrower eggs showed smaller surface area, volume, circumference and shell volume and vice versa. Eggs from farm “B” indicated significantly greater width, shape index, surface area, circumference and shell volume than farm “A”. A significant difference was observed in weight loss during storage between the farms. Weight loss in farm “A” was a multiple of farm “B”. In farm “B” there was a weak, positive correlation between storage period and weight loss (r=0.22, P≤0.05), in farm “A” it was not significant (P=0.52). There was no relationship between the initial egg weight and weight loss either in farm “A” or farm “B” (P=0,21, P=0,69). A slight positive correlation could be noted between egg porosity and weight loss (r=0.24, P≤0.05). Pores count presented here was less than the international results. Poultry eggs contain the most pores at the blunt end, less via the equator and the least at the pointed end. In ostrich egg we found more pores via the equator against the blunt end. To draw more precise conclusions, further investigation should be carried out on porosity. Considering the fact that the length of storage period and the weight loss during incubation are in strict correlation with hatchability, we intend to extend our research aims to these traits.
-
Yield and crown structure characteristics in a red oak (Quercus rubra L.) stand: Case study
49-53Views:120The paper provides the results of a detailed analysis of timber volume and several important crown variables of red oak (Quercus rubra L.) based on an experimental plot in eastern Hungary. At the age 32 years the crop trees belonged to different height classes. If the volume of the mean tree from height class I was considered as 100%, the volume of the mean tree of class II was 59%, and the mean tree of class III was only 36%. It appeared that there was a significant correlation between crown indices and yield. For this reason, diameter at breast height showed a positive linear correlation with crown diameter (R2= 0.6211). Additionally, there was also positive linear relationship between crown diameter and volume (R2= 0.6908). The variation of crown indices is height even within the same stand and indicates the importance of following a selective thinning operation method.
-
Evaluation of Dairy Farms’ Competitiveness
256-260Views:35The volume of milk production in the European Union is limited by quotas, thus dairy farms in Hungary can expand their production mostly at the others’ expenses after joining. In this way issues of arrangements arise relating to defining competitiveness of the already existing farms and not to farming new ones. The aims of my research is to find answers for dairy farms in the County of Hajdu-Bihar, depending on their arrangement (herd size, keeping technology, arable for forage production, handling manure, mechanisation, technician state of equipment) what possibilities they will have among the EU farmers.
-
Az évszak és az azonos évszakban történt ismételt mintavételek hatása holstein tenyészbikák ejakulátumának minőségi- és mennyiségi jellemzőire
33-37Views:83This study was carried out at the Hungarian National Artificial Insemination Centre in order to evaluate the seasonal effects on the quantitative and qualitative parameters of sperm production using sperm analyser equipment. The volume of ejaculate (VE), percentage of living sperm (PLS), spermatozoa concentration (SC), motility score (MC), percentage of motile spermatozoa (PMS), speed of movement of sperm cells (SMS) and the percentage of sperm cells moving straightforward (PSMS) were collected and observed in three seasons (summer, autumn, winter) in Holstein-Friesian breeding bulls (n = 15). The sperm collection was done for three successive weeks in every season on the same day (summer: n = 41, autumn: n=39, winter: n = 42, altogether: n = 122). The same sperm samples were measured by sperm analyser equipment (HTM version 7.0, Danvers) for PMS, SMS and PSMS. The seasonal and the number of sperm collection effects were confirmed on semen characteristics by multiple analysis of variance (two ways MANOVA, Type III) using the program package of STATISTICA 4.5. The average values of VE were similar in the three seasons (summer: from 4.42 to 6.28 cm3, autumn: from 4.08 to 6.86 cm3, winter: from 5.43 to 5.71 cm3). The average values of the MC were similar in each of the three seasons (summer: from 3.66-4.00 M; autumn: from 3.66-3.77 M; winter: from 3.86-4.07 M). The summary of all effects for season (P<0.001), repeated sperm collections in the same season (P<0.05) and interaction of two traits (P<0.01) were established on the measured characteristics. The special effects (P<0.05) of a given season were calculated, excepting the VE and MC, on all of the measured characteristics. The special effect (P<0.01) of the repeated sperm collections in the same season was verified in only one case (SMS). It is not surprised at the interaction was established on the VE (P<0.001), PMS (P<0.05), and SMS (P<10.0). The results of present study suggest that seasonal effect on sperm quality of breeding bulls cannot be eliminated even at standard feeding and keeping conditions. Considering our results, we can recommend that the average values of three successive weeks in every season be used, to take advantage of seasonal effect on the quantitative and qualitative parameters of sperm production.
-
Energy use – in terms of efficiency
61-66Views:156In the recent decades it has become apparent that the human race can lead to a polluting and energy- wasting lifestyle and the depletion of natural resources and an ecological disaster as well.
Energy efficiency is the realization of the chance to see a wider use of renewable energy. Renewable energy sources can be found in large quantities in Europe. A proper exploitation of these would be important because of the "traditional" energy sources’s sate is very critical in many ways.
The utilization of renewable energy sources depends on many factors. The local natural conditions significantly determine each country's different renewable energy potentials. I find to be important the natural conditions, such as, solar radiation intensity , the number of sunny days per year, the wind conditions , the volume and their energy characteristics of the geothermal power resources , land features , soil and rock quality, the supply of fossil fuels or the nuclear possibilities of energy production. The economic environment is also a major influencing factor for the utilization of renewables. The conditions of price of fossil fuels (natural gas, oil and coal), the price of nuclear fuel production and other energy costs significantly influence the demand for renewables, as well as the level of subsidy and government tax policy. In addition, the international and national programs, objectives, strategies, subsidies and regulatory measures as well as technological factors can have a significant impact.
In my paper I point out the opportunities of renewable energy should be given to live. Nowadays the positive effects of their use is undisputed. In addition to the environmentally friendly produced energy, we should strive for energy conservation and energy efficiency as well. These expectations appear in practice, which can be directly perceived by citizens, in fact we should live accordingly. Furthermore, the environmentally relevant regulations of living conditions should appear as environmental demands.
-
Effect of divided nitrogen and sulfur fertilization on the quality of winter wheat
27-31Views:172The ecological characteristics and agro-ecological conditions in Hungary provide opportunities for quality wheat production. For the successful wheat production besides the favorable conditions; the proper use of expertise and appropriate cultivation techniques are not negligible. Successful cultivation affected by many factors. To some extent we can affect, influence and convert the abiotic factors.
Today, a particularly topical issue is the question of nutrition and that the species’ genetic code can be validated using the appropriate quantity and quality fertilizer. Beyond determining the fertilizer requirements of the winter wheat it is important to align the nutrient to the plant’s nutrient uptake dynamics and to ensure its shared dispensing. In any case, it is important to note the use of autumnal base-fertilizer as complex fertilizer. Hereafter sharing the fertilizer during the growing season with the recommended adequate nitrogen dose.The first top dressing of winter wheat in early spring (the time of tillering) can be made, the second top dressing at the time of stem elongation, and the third top dressing at the end of the blooming can be justified. Determining the rate of fertilizer application depends on the habitat conditions and the specific nutrient needs of plants. In autumn the 1/3 of the planned amount of basic fertilizer should be dispensed (in case of N). During setting our experiment we used 3 doses (0 kg ha-1 N-1 active ingredient; 90 kg ha-1 N-1 active ingredients and 150 kg ha-1 N-1 active ingredient). Application dates beyond the autumn basic fertilization are the following: in one pass in early spring, divided in early spring and the time of run up, early spring and late flowering. In addition to nitrogen the replacement of sulfur gets a prominent role as a result of decreased atmospheric inputs. The proper sulfur supply mainly affects the quality parameters. It influences positively the wheat flour’s measure of value characteristics (gluten properties, volume of bread, dough rheology.
In terms of nitrogen doses; the larger amounts (150 kg ha-1 N-1 drug), is the proposed distributed application, while in the case of lower nitrogen (90 kg ha-1 N-1 drug) in a single pass in the early spring can achieve better results. After using sulfur the quality values among the nutritional parameters that can be associated with gluten properties took up higher values than the samples not treated with sulfur.
-
Data supporting the quality of sheep milk for processing
67-73Views:97Although the volume of ingredients in ewe’s milk is substantially higher than in cow’s milk, its hygienic quality is lower. The weak quality of raw ewe’s milk limits the possibilities of processing and results in bad quality products. In our investigation we analysed the state of ewe’s milk processing at a typical medium size dairy firm. We investigated the collection, the amount and the quality of milk and the level of ingredients in milk throughout the purchasing period (lactation period).
The purchasing of ewe’s milk was limited to 5 months (from April to September). Although meat (lamb) provides the major source of income to sheep breeders the extension of the period of ewe’s milk production can be beneficial to shepherds and dairy firms. The amount of ewe’s milk ingredients found corresponded to published findings. However, the hygienic quality of ewe’s milk was varied greatly in the different milk samples and these deviations meant bad quality on average. Physiological factors, the circumstances of sheep breeding and milking, the slow cooling of the milk, the little amount of daily milk and the long storage before transportation to the dairy firm together cause poor hygienic quality. The main problem is the long storage time of milk, but our results raise the question of reconsidering the quality classes. Investigating the effect of the hygienic quality of raw milk on product quality, we can get correct data that can be really authoritative. -
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:179In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
Application of AquaCrop in processing tomato growing and calculation of irrigation water
183-187Views:310The area and volume of processing tomato production is increasing in Hungary. Irrigation is crucial for processing tomato growing. To save water and energy, it is important to know exactly how much water is needed to reach the desirable quality and quantity. AquaCrop is a complex software, developed by FAO, which is able to calculate irrigation water needs, several stress factors and to predict yields. A field experiment was conducted in Szarvas in processing tomato stands, under different irrigation treatments. These were the following: fully irrigated plot with 100% of evapotranspiration (ET) (calculated by AquaCrop), deficit irrigated plot with 50% of ET (D) and control (K) plot with basic water supply was also examined. Dry yield, crop water stress index and soil moisture were compared to modelled data. The yields in the plots with different access to water were not outstanding in the experiment. The model overestimated the yields in every case, but the actual and modelled yields showed good correlation. AquaCrop detected stomatal closure percentages only in the unirrigated plot. These values were compared to CWSI – computed from leaf surface temperature data, collected by a thermal cam in July – and showed moderately strong correlation. This result suggests that Aquacrop simulates water stress not precisely and it is only applicable in the case of water scarcity. Soil moisture data of the three plots were only compared by means. The measured and modeled data did not differ in the case of K and ET plots, but difference appeared in the D plot. The obtained results suggest that the use of AquaCrop for monitoring soil moisture and water stress has its limits when we apply the examined variables. In the case of dry yield prediction overestimation needs to be considered.