Search
Search Results
-
The effect of plant density on maize yield in average and extremely dry years
7-16Views:118The yield safety of maize has not been satisfactory in Hungary for decades. Yield is influenced by the combination of several factors.
In recent years, the frequency of dry years increased and fertilization decreased. These factors call for a rational determination of the plant density.
I studied the relationship between plant density and yield in 2003-2004 and 2007 on meadow soil.
In 2003, the weather was dry. In the vegetation period, the amount of precipitation was 78.5 mm lower and the temperature was 0.97 °C higher than the average of 30 years, the number of hot days was 47-60 (days with a temperature higher than 30 °C). However, we obtained favourable results under experimental conditions in 2003 after wheat as a forecrop using the fertilizer Kemira Power.
The weather in 2004 was favourable. In the vegetation period, the amount of precipitation was 93.2 mm higher than the average of 30 years. Although, the distribution of the precipitation could have been more favourable. The yield of the hybrids ranged between 8.87-10.42 t/ha. Among the studied seven hybrids, the early hybrids gave the highest yield at the highest plant density of 90 thousand plants/ha (PR38Y09, PR38A67, PR37D25, PR37M34). However, FAO 400-500 hybrids gave favourable results also at the low plant density of 45 thousand plants/ha (8-9 t/ha). At this plant density, the aeration of the plant stock was better and the hybrids were prone to bringing several cobs. Yield stagnated with increasing plant density (60 thousand plants/ha), then at 75-90 thousand plants per ha, the yield started to increase again.
In 2004 the yield of hybrids was considerably higher than in the previous year. In contrast to yields of 8.87-10.42 t/ha in 2003, yields in 2004 were around 9-12 t/ha.
The yield of the hybrid XO 902 P is above 12 t/ha already at a plant density of 45 thousand plants/ha. It gives maximum yield at the plant density of 90 thousand plants/ha.
The hybrid PR38P92 showed a good response to changing plant density, but its yield was only 9 t/ha at the low plant density value.
In a favourable year, the yield of the hybrids PR38B85, PR37W05, PR37D25, PR37K85 at a plant density of 45 thousand plants/ha 11 t/ha, while at the higher plant density of 90 thousand plants/ha, it ranges around 13-15 t/ha.Hybrids PR36K20, PR35Y54, PR34H31 have a good individual yield and they are prone to bringing several cobs in favourable years at a low plant density. Their maximum yield at the plant density of 90 thousand plants/ha is almost 16 t/ha.
In 2007, the weather was similar to that of the extremely dry year of 2003. The amount of precipitation in the vegetation period was 41.9 mm lower than the average of 30 years and its distribution was not favourable either.
In the optimum NPK fertilizer treatment at an optimum plant density, the yield of hybrids ranged between 9.32-10.73 t/ha. The highest yields of 10.22-10.73 t/ha were measured for hybrids PR38A79 (FAO 300) and PR35F73 at a relatively low plant density of 60 thousand plants/ha.
In the average of the hybrids, the optimum NPK dosage was N 131, P2O5 82, K2O 93 kg/ha active ingredient. -
The Effect of Plant Density on the Yield of Sunflower Hybrid’s in 2001-2002
184-189Views:126Nowadays, for increasing efficiency of sunflower production treating hybrid-specific technologies was required. Increasing of hybrid choice gave reasons for trials in respects of critical factors, as well as in case of genotype-enviroment interactions. The effect of changing plant density show up as determinant factor which affects on yield as well as on plant hygienic conditions. Trials were established on calcareous chernozem soil (Hajdú-Bihar county), in 2001-2002. The field trials were randomized, in four repetition on small parcels. The plant density trials were established in 35.000-75.000 plant/hectar interval using a scale of 10.000 plant/hectar. 10 hybrids were used in both year.
In 2001, 55.000 plant/hectar density was the optimal, in case of most of the hybrids. The yield of tested hybrids did not show significant difference. Yield decreasing effect of using less than optimal density was more significant than in case of using optimal plant density. In 2002, the optimal density was in 45.000-65.000 plant/hectar interval, there was no possibility to find narrower optimum.
Presence of Diaporthe helianthi and the damage caused by the pathogen was significant in 1997-1999, whereas in 2001-2002 the large-scale appearance of the pathogen did not occur. In 2001, the affect of high plant density on disease caused by Diaporthe helianthi showed just tendency-like appearance, in 2002, the infection showed up just in the end of the vegetation period, without significant damage. In spite of the low infection level, the difference between the infection of the diverse plant density treatment was significant. Increasing plant density made increase the frequency of the Diaporthe helianthi infection. The rate of the flower diseases was around 3-16% in 2001, the highest infection level emerged in 65.000-75.000 plant/hectar density, whereas in 2002, the rate of infection level was less than 10%. The increasing plant density helped the development of flower diseases. -
Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
101-109Views:123The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested yield was 2.43 t ha-1, which was the highest in the world.
Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR. -
The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
95-104Views:102The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
The soil of the experimental plots was meadow soil.
Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
Results of the sowing time experiment:
In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
Results of the plant density experiment:
We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years. -
Studies of plant density increase – on maize hybrids of various genotypes on chernozem soil
87-92Views:175The yield and crop safety of maize are influenced by numerous ecological, biological and agrotechnical factors. It is of special importance to study one of the agrotechnical elements, the plant density of maize hybrids, which is influenced by the growing area conditions and the selected hybrid.
We have investigated the effects of three different plant numbers (50 thousand plants ha-1, 70 thousand plants ha-1 and 90 thousand plants ha-1) on the yield of 12 maize hybrids of different genotypes in Hajdúság, on calcareous chernozem soil, in the Látókép Research Farm of the University of Debrecen, Centre for Agricultural Sciences, in 2013. The experiment was set in four replications, besides commonly applied agrotechnical actions. In the experiment, 1 hybrid of very early (Sarolta), 9 of early (P 9578, DKC 4014, DKC 4025, P 9175, NK Lucius, Reseda, P 37N01, DKC 4490, P 9494) and 2 of medium (Kenéz, SY Afinity) maturation were used.
With the increase of the plant number, the number of individuals per unit area increases. According to our experimental results, we have concluded that with the increase of the plant number, the yield increased in the average of the hybrids. In the average of the hybrids, in the case of 50 thousand plants ha-1, the yield was 13 130 kg ha-1, in the case of 70 thousand plants ha-1, it was 13 824 kg ha-1, while in the case of 90 thousand plants ha-1, the yield became 13 877 kg ha-1.
In addition to plant density increase, it is necessary to determine the optimal plant number that is the most favourable for the certain hybrid under the given conditions. To fulfil this aim, we have determined the optimal plant number corresponding to the maximum yield of the given hybrid, within the given plant number range. The optimal and applied plant numbers differ, since the optimal one could only be applied under ideal conditions. Since the agrotechnical actions cannot always be carried out in appropriate quality and one has to adapt to the weather conditions, thus we have determined a plant number range in the case of each hybrid. The hybrids were classified into categories of producible in narrow and broad plant number range.
-
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:148Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
Effect of the plant density on different maize (Zea mays L.) hybrids yields and leaf area index (LAI) values
51-56Views:164We have investigated the plant number reactions of three maize hybrids of various genotypes in a small-plot field experiment. The plant numbers were 50, 70 and 90 thousand ha-1, while the row distances were 45 and 76 cm. The experiment was set on the Látókép Experimental Farm of Centre for Agricultural Sciences of the University of Debrecen in four replications on calcareous chernozem soil.
The assimilation area and the leaf area index have important role in development of the crop yield. The studied three different genotype maize hybrids reached its maximum leaf area index at flowering. The maximum leaf area index increased linearly with increasing plant density. The season-hybrids reached less yield and leaf area index. According to our experimental results, we have concluded that with the decrease of the row spacing, the yield increased in the average of the hybrids. The studied hybrids reached the maximum yield at 70 and 90 plants ha-1 plant density. We determined the optimal plant number that is the most favourable for the certain hybrid under the given conditions.The higher plant density was favourable at 45 cm row spacing than 76 cm. The hybrids reached the maximum grain yield at 45 cm row spacing between 76 712–84 938 plants ha-1, while the optimum plant density at 76 cm row spacing changed between 61 875–65 876 plants ha-1.
The leaf area index values between the applied plant density for the flowering period (July 1, 24), we defined a significant differences. In the archived yields were significant differences at the 45 cm row spacing between 50 and 70, 90 thousand ha-1 plant density, while the number for the 76 cm row spacing used did not cause a significant differences in the yield. There were significant differences between the examined hybrids of yields.
-
Site and hybrid-specific agrotechnical models in sweet corn production
105-108Views:107The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem soils. -
The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
39-49Views:124Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety. -
The effect of and interaction between the biological bases and the agrotechnical factors on maize yield
83-87Views:169The effect of and interaction between the biological bases and the agrotechnical factors on maize yield In our research, we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons.We analysed the correlation between the nutrient supply and the yield of maize hybrids with a control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.In 2015, the highest yield was produced by hybrid P9241 with N80+PK and 70 thousand plants per hectare. With the N160+PK fertilizer dosage, the same hybrid responded the best, followed by hybrids P9486 and DKC4717. Using the same fertilizer treatment, the 80 thousand plants per hectare population density resulted in decrease in the yield with most of the examined hybrids. In 2016, with the increase in the number of plants per hectare, even with non-fertilised treatment (control treatment), the yield could be increased in the case of each hybrid.Averaged over the different hybrids and fertilizer treatments, applying 80 thousand plants ha-1 instead of 60 thousand resulted in 1.0 ha-1 yield increase. In 2017, the number of plants had a slighter effect. With N160+PK treatment, in most cases no significant difference can be observed. The value of LSD5%: plant number: 0.20 t ha-1, hybrid: 0.28 t ha-1, interaction: 0.48 t ha-1. With N160+PK treatment, the hybrids produced yields between 10.07 and 12.45 t ha-1. When examining the three years in the average of the number of plants, with treatment without fertilisation, the average yield of hybrids reached 7.53 t ha-1. With N80+PK treatment, this value was 9.71 t ha-1 and with doubling the fertilizer dosage, this value increased to 10.42 t ha-1. No economic profit was gained as a result of applying double dosage of fertilizer; therefore, the N80+PK dosage can be considered ideal. -
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:195In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:156Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
The response of sunflower hybrids to different plant densities on a chernozem soil
123-128Views:206In our experiment the reaction of six sunflower hybrids of different genotypes (NK Oktava, ES Biba, ES Diagora, ES Ballistic, EGH 8925, PR 64 H 42) towards plant density has been investigated by different fungicide treatments in the crop-year of 2011 on a chernozem soil.
In the crop-year of 2011 sunflower populations were infected by a significant Diaporthe helianthi disease. The extent of this infection was significantly enhanced by the increment of plant density. However, regarding the average of the hybrids and plant densities the two times executed fungicide treatment has decreased the infection rate by 22%. The most susceptible hybrid was the ES Biba. Contrarily, the hybrid ECH8925 proved to be the most resistant hybrid towards this
disease according to our results. According to the results of the Pearson’s correlation analysis it has been revealed that stalk breakage and Diaporthe infection stand in a very close (r=0.782**) and middle close (r=0.523**) correlation resp. with plant density. The relationship between fungucude treatments and stalk breakage, just as Diaporthe infection showed to be middle and close respectively. Our results demonstrate the role of stalk and plate diseases (among them Diaporthe) in causing stalk breakage, for we have found a close positive correlation between stalk breakage and Diaporthe infection (r=0.624**) in our analysis.
From the aspect of yield amount the optimal plant density varied between 45 000 and 55 000 plants per hectare. Fungucude treatments enabled not only the use of higher plants densities, but they had a yield increasing effect as well. In the crop-year of 2011 the highest yield (4 559 kg ha-1) on a chernozem soil has been measured in case of the hybrid ECH8925. -
The effect of agrotechnological factors and the cropping season on sweetcorn (Zea Mays L. convar. saccharata Koern.) production in a humid year
146-151Views:90We have examined the effect of three agrotechnological factors (sowing time, fertilization, crop density) and four genotypes on the yield
of sweetcorn on chernozem soil in the Hajdúság region in 2009. The experiment was set up at the Látókép Research Site of the University of
Debrecen. We have included two sowing times (27 April, 26 May), six nutrition levels (control, N30+PK, N60+PK, N90+PK, N120+PK,
N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) at two crop density levels (45 thousand ha-1).
In the humid cropyear of 2010 the amount of precipitation exceeded the 30-year average by 184 mm in the cropping season; the average
temperature exceeded the same by 0.8 C on the average of the examined months. The circumstances were most favourable for sweetcorn
production with the first sowing time, thus, this was when the yield of all hybrids was the highest.
With early sowing time, the highest yield (23437 kg ha-1 yield) was obtained with Enterprise at 45 thousand ha-1 crop density level at
N150 + PK nutrition level. The highest yield of the other three hybrids was 22253 kg ha-1 (Jumbo) 22286 kg ha-1 (Box-R) and 1873 kg ha-1
(Prelude). With the second sowing time, the highest yield was obtained with Enterprise again (22237 kg ha-1) at 65 thousand ha-1 crop
density level. With this sowing time the yield of Jumbo, Box-R and Prelude was 20888 kg ha-1, 17796 kg ha-1 and 17401 kg ha-1, respectively.
We found that the highest yield was obtained at the highest nutrition levels (N120 + PK, N150 +PK) with the first sowing time, while the same
was obtained at lower nutrition levels (N90 + PK, N120 + PK) with the second sowing time. -
The Effect of Plant Density on the Yield of Sunflower Hybrids in 2000-2002
96-99Views:161In order to ensure modern Hungarian sunflower production, the development of hybrid-specific techniques are highly important. The continual expansion in hybrid choice makes the examination of genotypes necessary in the relation of genotype and environment interactions and critical factors. The Plant density as a complex determinant factor has a strong effect on sunflower yield, quality and plant hygiene. As a result of the experiments, we can state that the optimal density was 45.000-65.000 plant/hectar. In 2001-2002, the optimal density was 45.000-55.000 plant/hectar; while in 2000, it was 65.000 plant/hectar.
-
Examination of plant number and sowing date in different crop years
79-82Views:120We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.
In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.
We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.
Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:116Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Evaluation of long term experiments from a new aspect
55-60Views:142During our work, we developed a new, simple method to show the effects of fertilization on yield, which can both be applied over the long term as well as in series of independent experiments.
During the testing of this method, at the experimental farm of the Debrecen University Center for Agricultural Sciences at Látókép on a chernozem soil with lime deposits, we examined the fertilizer reaction of maize hybrids between 1989 and 1994. The treatments were: winter tillage, plant density of 70-80 thousand, unfertilized, N 120, N 240 kg/ha fertilized treatments, long term experiments using Dekalb 524 and Volga SC hybrids in long term experiments.
Four parameters are shown in the model. In the examined period TRmax represents the greatest yield in the fertilized treatments, NT the yield in unfertilized treatment, k the „efficiency of fertilizer” to NT and b the depression-coefficient, where the expected value is zero. The expected grain yield of the fertilized treatments (Y), in the function of the unfertilized grain yield (x) is the following:
The parameters were determined using the Monte Carlo method, in the optimizing process the sum of deviation square was minimized. The correct conformation of the functions was determined by the greatness of the R-value and the standard error. We found that during six years of testing, the tendency of fertilization efficiency was similar in the case of both hybrids. There was an unfavorable weather interval and, in these years, the yields were low, fertilization did not have an effect and moreover, in extremely bad conditions resulted in an obvious yield decrease. With the improvement of conditions, which in the case of our country means an increase in precipitation, the efficiency of fertilization increases and reaches its peak at 13-14 t/ha. At this point, the yield increasing effect of fertilization is 4-4,5 t/ha. If the yield of the unfertilized treatments increases from 8-9 t/ha, then the efficiency of the applied fertilizer decreases.
Most likely, the k and b parameters depend on the soil of the experimental location (nutrient and water management) and on the amount of pplied fertilizer and the characteristics of the hybrid. With the increase of fertilizer dosage the k-parameter also increases. The greater value though does not obviously mean a more favorable situation. It is true that in medium and good years this means great fertilizer efficiency, but in low or extreme precipitation conditions it also means greater risk. With the increase of the k-parameter, the yield deviation also increases which, from a cultivation point of view, is quite unfavorable. If the value of the b-parameter is other than, zero then the effect is clearly unfavorable, because with the increase of this value, the yield decrease is also greater. The fertilizer reaction of the two examined hybrids can be well characterized by these two hybrids.
Examining the six years, our created model estimated the effect of fertilization on the yield accurately and with a high degree of safety. Both in highly unfavorable and extremely good years, it gave an exact estimate. In our opinion, it can be used well to evaluate the effects of fertilization on yield in the future. -
The main influencing factors effecting the yield of maize
137-141Views:118Maize is one of Hungary’s major cereals. In the 1970s and 1980s, we were in the frontline regarding yields and genetic advancement. However, yield fluctuation in maize has increased to 50-60% from 10-20% since the 1980s, which was partly caused by the increase in weather extremes due to climate change and by agrotechnical shortcomings.
The experiments were carried out on typical meadow soil in four repetitions in the period of 2007-2008. In the sowing time experiment, sowing was performed on 10 April, 25 April, 15 May under a uniform fertilization of N120, P2O580 K2O 110 kg/ha. In the fertilization experiment, the yielding capacity of 10 hybrids with different genetic characteristics was studied in a control (non-fertilized) treatment and basic treatment of N40 P2O5 25, K2O 30 kg ha-1 active ingredient and a treatment with fivefold dosages of the basic treatment. In the plant density experiment, the relationship between plant density and yield was analysed at plant densities of 45, 60 and 75 thousand plants per ha. We found a tight correlation between sowing time and yield and grain moisture content at harvest. We found that grain moisture can be reduced by 5-10% by applying an earlier sowing time.
The agroecological optimum fertilizer dosage was N 40-120, P2O5 25-75, K2O 30-90 kg ha-1 active ingredient at a plant density of 60-90 thousand plants ha-1 depending on the hybrid and the year. -
Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
105-110Views:119In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.
-
Researches regarding the influence of the some technological elements on water use efficiency in maize from Crisurilor Plain
5-9Views:155Plain and the influence of the hybrid, plant density, crop rotation, nutrient supply, weeds and irrigation on water use efficiency were studied.
Choosing of the hybrid with the best water use efficiency is very important because a hybrid from 500–600 FAO group (Fundulea 376) in unirrigated conditions and a hybrid from FAO group over 600 (Fundulea 365) obtained the biggest water use efficiency; the hybrid Fundulea 365 obtained the highest irrigation water use efficiency, 20.1 kg yield gain 1 mm-1 irrigation water.
One of the most known hybrid in the area is Turda super and the highest water use efficiency was obtained using the plant density of 55 000 plants/ha in unirrigated variant and 70 000 plants/ha in irrigated variant. The highest irrigation water use efficiency, 20.7 kg yield gain 1 mm-1, was obtained at 70 000 plants ha-1.
In maize monoculture was obtained the lowest values of the water use efficiency in unirrigated and irrigated variant: in the wheat-maize crop rotation the values were higher than in maize monoculture and in the wheat-maize-soybean were registered the highest values. The same situation was registered regarding the irrigation water use efficiency.
Farm manure (30 t ha-1) and especially manure (30 t ha-1) +chemical fertilizers (N90P45) determined a higher values of the water use efficiency in comparison with the control. In the variant with organic + mineral fertilization was registered the higher value (19.4 kg yield gain mm-1) of the irrigation water use efficiency.
Water use efficiency was much lower in the variant with weeds in comparison with the variant without the weeds; the differences were of 69% in unirrigated variant and of 64% in irrigated variant, very significant statistically. Irrigation water use efficiency from variant with weeds was lower than the value registered in the variant without weeds; the difference (68%) was very significant statistically.
In average in period 1976–2012, the irrigation determined the increasing in water use efficiency with 22%, 19.4 kg mm-1 vs. 15.8 kg mm-1, but not in all the years caused the irrigation increasing in water use efficiency in comparison with unirrigated maize.
The results research emphasized the need of the optimization for technology elements studied and a better water use efficiency will be obtained.
-
Technological development of sustainable maize production and its effect on yield stability
379-388Views:210In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:324Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
The effect of sowing date and plant density of winter oilseed rape (Brassica napus var. napus f. biennis L.) population
213-215Views:204The experiment has been set up in the University of Debrecen Látókép Experimental Station in three different years (2014, 2015 and 2016), three different plant densities 200, 350 and 500 thousand ha-1, four replications of the same nutrient supply with using a line spacing of 45 cm. In the experiment, the fore crop was winter wheat in each year. The amount of weeds was observed five times in the last experimental year (2016/2017). In the three experimental years, the highest yield was harvested from the early sowing plot with the highest plant density. On the basis of the Pearson’s correlation analysis there was significant negative correlation (r=-0.583) between the effect of the annual year and yield of the hybrid.
-
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:137For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance.