Search
Search Results
-
Examination of the Effect of Cropyear on the Yield Potential and Yield Stability of Winter Wheat Varieties
62-67Views:414Variety selection is one of the most important, determinative elements of sustainable winter wheat production. Yield potential, and yield stability are the most important elements in the variety selection of winter wheat, but baking quality parameters play an important role, too.
Several winter wheat varieties were tested for yield and yield stability on chernozem soil in the Hajdúság (in the eastern part of Hungary), in the 2001-2002-2003-2004 cropyears. The management factors were the same for all cropyears. 15 varieties in early the maturity group, 14 varieties in the middle maturity group and 4 varieties in the late maturity group were tested in the above mentioned cropyears. The climatic conditions were average in 2001, dry in 2002, extremely dry in 2003, and very favourable in 2004.
We obtained 5298-6183 kgha-1 yield from early maturity varieties, 5683-6495 kgha-1 from middle, 5694-6031 kgha-1 from late ones in the average of four years. The cropyears had strong influence on the yields, even on chernozem soil, and were characterized by excellent water – and nutrient – husbandry. Averaging of cropyears and genotypes, we obtained 6984 kgha-1 in 2001 (average cropyear), 5452 kgha-1 in 2002 (dry cropyear), 3120 kgha-1 in 2003 (extremely dry cropyear) and 8400 kgha-1 in 2004 (optimum cropyear), respectively. The yield differences between the minimum and maximum yields were 885 kgha-1 in early varieties, 812 kgha-1 in middle and 337 kgha-1 in late maturity varieties, respectively. The varieties characterized by high yield potential and the varieties characterized by good yield stability were different, so in variety selection we have to take both genetic traits into consideration. There were positive, significant correlations among the yields of winter wheat varieties (early, middle, late), the temperature of spring months. (March-April), and the rainfall of spring months (March-April) (R2=0,703**-0,768** and R2=0,681**-0,749**, respectively). We found a high negative correlation between the temperature of early summer months (May-June) and the yields of wheat varieties (R2= -0,856**- -0,918**).
According to the results of our experiment, it is very important to harmonize yield potential and yield stability in the variety selection of winter wheat. -
Procurement as enterprise function at vegetable and fruit processing companies
228-235Views:149The first main element of the supply chain is procurement; which has a great influence on the quality of products and services. The most important role of the procurement is the purchase of inputs which are necessary for the operation of companies. This includes procurement planning and the development of procurement strategy, so procurement is a process that is even more than simply buying raw materials. The functions of procurement are the selection of suitable suppliers, contracting, controlling and improvement of suppliers, and coordination of activities with other parts of the company.
Planning of procurement, strategy formulation, supplier selection and evaluation, monitoring of the procurement process, and modification of original plan are important tasks of entrepreneurial procurement. The importance of procurement in a business organization is reflected by its position in the hierarchy of the firm. There are subjective and objective methods to select suppliers accomplishing their tasks on time and with good quality. Efficient purchasing management activity contributes to an increased competitiveness of the enterprise. The aim of this publication is to describe the procurement activities, to examine supplier selection and evaluation methods, to determine the position of procurement in the organization, and to prove the strategic importance of procurement. -
Micropropagation of Leuce-poplar clones and its role in selection breeding
43-48Views:372Leuce-poplars (mostly white poplar and its natural hybrid grey poplar) are native tree species trough Hungary. They are covering more than 4.0 per cent of the Hungarian forested area (77 000 ha). The white (grey) poplars play a significant role in the forestation under sandy soil site conditions as well as they are of importance from nature conservation point of view as well.Long-term selection breeding work is going on at the National Agricultural Research and Innovation Centre Forest Research Institute (NARIC FRI), involving selection of fast-growing Leuce-poplar clones under dry site conditions.Micropropagation technology is relatively quickly spreading in forestry. In vitro multiplication of trees is applied mainly in fruit growing in Hungary, in case of forestry it is used mainly for selection breeding.This paper presents a short overview on the micropropagation trials with different Leuce-poplar clones and the early evaluation of the seedlings growing of the micropropagated clones/varieties. -
Selection of powdery mildew resistant and susceptible grapevine genotypes with molecular markers
100-104Views:333Incorporation of competitive quality and resistance against the most important fungal diseases (powdery and downy mildew) in a cultivar is one of the most important aims of grapevine breeding. In the 20th century, the most advanced results in grapevine resistance breeding were achieved by French researchers. They used resistant cultivars in more than 30% of their growing areas. In these varieties, North American wild Vitis
species were the resistance gene sources. The discovery of immunity-like resistance of Muscadinia rotundifolia opened new perspectives in resistance breeding. M. rotundifolia harbours a dominant powdery mildew gene, providing resistance in highquality cultivars after back-crosses with V. vinifera varieties. M. rotundifolia has been involved in the Hungarian grape breeding programs since 1996, thanks to a French-Hungarian variety exchange. In addition to traditional selection methods, application of MAS (Marker Assisted Selection) based on various types of
molecular markers, can provide additional tools for these efforts. Run1 locus, responsible for powdery mildew resistance, was identified in Muscadinia rotundifolia. Molecular markers closely linked to this locus are very significant in screening progenies deriving from M. rotundifolia and V. vinifera crosses, making possible the discrimination between resistant and susceptible genotypes at DNA level. In our analyses BC5 progeny of {(M. rotundifola×V. vinifera) BC4}×Cardinal (V. vinifera) tested for powdery symptoms were analysed with PCR-RFLP (GLP1- 12P1P3) and microsatellite markers (VMC4f3.1, VMC8g9). Our results proved the applicability of the linked markers and reliability of marker assisted selection. -
The comparison of sperm motility and density in four different goldfish (Carassius auratus) types
135-140Views:358Different goldfish types play an important role both in ornamental fish farming and science. Considering its historical background, the goldfish is a suitable model animal for the study of artificial selection as well as for developmental biological studies. Sperm motility and cell density is an important parameter in determining sperm quality. The aim of our study was to examine the effects of different goldfish types on the sperm quality. Several sperm motility parameters (progressive motility (pMOT, %), straight line velocity (VSL, μm s-1), curvilinear velocity (VCL, μm s-1), linearity (LIN, %), amplitude lateral Head Displacement (ALH, μm), Beat Cross Frequency (BCF, Hz)) of four different goldfish types (Common goldfish-“wild type” N=5, Shubunkin N=4, Black Moor N=4, Oranda N=5) was compared during 60 hours (at 12-hour intervals) at refrigerated storage (4 °C). The variability of sperm density was also investigated in all types. A similar cell concentration was determined in the four goldfish variants (Common goldfish 2.01*1010 ± 3.46*109; Shubunkin 1.71*1010 ± 3.25*109; Black Moor 1.66*1010 ± 3.02*109; Oranda 1.56*1010 ± 5.83*109). Statistically significant difference between the 4 goldfish types in the motility parameters and cell density was not noted. However, a decreasing tendency in Black Moor sperm motility parameters (pMOT, VCL and VSL) was observable, as well as a reduced spermatozoa density in Oranda was also recorded. Our results can contribute to the improvement of the common hatchery propagation of goldfish. Future studies can add more evidence of the possible effects of artificial selection on the reproduction in different goldfish types.
-
The effect of the dates of shoot selection and shoot tip removal on the growth of William’s pear trees
65-70Views:271Increasing the intensity of production in the case of pear can be the solution to satisfy the market demand forr high-quality fruit. The aims in this technology are the canopy treatments and the maintainance of consistently high quality yields in the long run. The experiments were performed with cv. William’s pear, a cultivar grown on large areas in Hungary. To create the optimal canopy shape for earlier fruiting, we performed shoot selection and the cutting back of shoot tips. Our results show, that both pruning methods – applied at 3 different dates – decreased the number of short fruiting parts (spurs), and increased the number of vegetative shoots. The sole exception was from this the effect of shoot tip removal when done at the earliest date.
-
Gene resources for improvement of drought tolerance and yield quality in dry pea breeding
105-111Views:241The effectiveness of selection for improved drought tolerance and consumption quality in the progeny of crosses between pea cultivars with semi-leafless (afila) and normal leaves and different origins, respectively, were investigated. After single crosses, parent cultivars and F1, F2 and F3 generations were grown under non-irrigated conditions in the same trials. We created a colour scale from 1 to 9 to measure statistically the shade of seed colour. The tolerance of genotypes against high temperature was measured by the number of pods per plant. The 3:1 segregation
observed in the F2 generation of crosses between semi-leafless and conventional cultivars indicated that the semi-leafless character is determined by a recessive gene. In contrast, the ratios of conventional (Af) and semi-leafless (af) genotypes were 7:1 and 9:1 ratio in the progenies of crosses of Af × af. The genetic progress was effective for improving the seed quality in F3 generation from crosses Af x af where we found that multiple
dominant alleles controlled the orange colour of cotyledons and its high heritability (h2 A=0,63). Selection is more effective in producing the genotypes with high yield and normal leaves if the crosses were made between the western European cultivars such as semi-leafless Profi and Delta used as maternal cultivars and conventional Auralia cultivars. In this case, there were decreases in the consumption quality, such as seed size and shade of colour. The selection based on the seed weight of single plants for increasing drought tolerance seemed to be more effective in F4
strains with normal leaves originated from Czechoslovakian maternal cultivar Y228; however, the genetic progress in the improvement of seed size and colour quality was slow. -
Advancement of a Common Wheat (Triticum aestivum L.) Selection System
8-11Views:201All the research in Hungary and other countries in Europe focus on improving the quality of crops and increasing the competitiveness of production.
In this respect, we have to advance the conventional technological elements, reduce the application of pesticides and fertilizers, and produce new varieties suitable for environmentally-sound production. In our crop breeding programs, we applied conventional and biotechnological methods (embryo rescue and double haploid methods) in order to get somaclonal and gametoclonal variations.
We produced winter wheat lines (HP-31-95, HP-82-96) by traditional way, which have high baking qualities and high nutrient efficiency. Some diseases can limit the quantity and quality of a wheat crop. We examined several wheat diseases in our winter wheat candidates, and we found that our progenies have resistance to leaf rust.
With respect to a serious problem was the small quantity of applied fertilizers and the other externals, our research focused onto advance a common wheat selection system, with the help of it, we can handle these problems. We have summarized that our selected progenies can compete with the registered varieties with quality and environmental respect. -
Development of a New Maize (Zea mays L.) Breeding Program
25-30Views:331Genetic manipulation may not replace any conventional method in crop breeding programs, but it can be an important adjunct to them. Plant regeneration via tissue culture is becoming increasingly more common in monocots such as corn (Zea mays L.). In vitro culturability and regeneration ability of corn decreased as homozigosity increased, which suggested that these two attributes were controlled primarily by dominant gene action. Pollen (gametophytic) selection for resistance to aflatoxin in corn can greatly facilitate recurrent selection and screening of germplasm for resistance at a much less cost and shorter time than field testing. Integration of in vivo and in vitro techniques in maize breeding program has been developed to obtain desirable agronomic attributes, speed up the breeding process and enhance the genes responsible for them. The efficiency of anther and tissue cultures in most cereals such as maize and wheat have reached the stage where it can be used in breeding programs to some extent and many new cultivars produced by genetic manipulation have now reached the market.
-
Preliminary test: Evaluation and selection of tomato (Lycopersicon esculentum Mill.) varieties resistant to drought and powdery mildew
33-37Views:334Powdery mildew (Leveillula taurica) and (Oidium neolycopersici) are two harmful fungi that invade the tomato (Lycopersicon esculentum Mill.) plant and grow in dry conditions. Under the influence of polyethylene glycol 6000 at a concentration of 12%, the total seedlings fresh weight, total seedlings dry weight, seedling growth rate of one seedling, seedling length, and tissue water content percentage for three tomato varieties were assessed. Despite the superiority of the (Mobil) tomato variety in terms of numerical values, the results revealed no significant differences between varieties. As a result, (Mobil) has greater vigor under environmental drought stress of lower osmotic stress than other tomato varieties. More work is required to evaluate the research selection of varieties resistant to biotic stresses in dry areas, such as powdery mildew disease.
-
Brief overview of the polymorphism analysis of genes affecting pig prolificacy (LEP, PRLP, ESR BF, EGF, FSH-β, H2A.Z)
5-10Views:461Researches are being performed around the world to increase swine prolificacy by using marker-assisted selection (MAS). The present study processes researches of polymorphism examinations on 7 genes. The result of the experiments showed that the leptin gene (LEP) prolactin receptor gene (PRLP), estrogen receptor gene (ESR), properdin B (BF) epidermal growth factor (EGF), follicle-stimulating beta gene (FSH-ß) and Z member of the H2A histon family gene (H2A.Z) and their alleles have a positive effect on reproductive characteristics of different swine breeds. In addition to this, leptin gene (LEP) influences the build, meat production and growth of body fat. Further studies are concerned with the polymorphism of an increasing number of genes, which enables a faster genetic development of swine breeding.
-
Búzalisztek minőségének becslése tészta nyújtás-szakítás alapján állományvizsgáló műszerrel
38-44Views:173Literature experience was utilised to develop a method for the extensograph analog testing of paste with a QTS25 Texture Analyser. 54 wheat flour samples from the same variety from variety-preservation experiments at the Szeged were tested with this method. A study was made to establish whether the method is suitable for the estimation of results derived by traditional classification (trial baking, farinograph and gluten tests).
A close and significant correlation was found between the hardness and area data measured with a QTS25 micro-extensograph, the farinograph values and the gluten spreading data, and also between the stretching index (BC/AC) and the water uptake capacity. These correlations correspond well with the findings from a previous experimental series on industrial flour samples. A close and significant correlation was likewise observed between the grain hardness established by the MININFRA method and all the QTS25 micro-extensograph data. In contrast with earlier QTS25 data, however a close correlation was not found between the QTS25 data and the loaf characteristics.
With the use of micro-extensograph data, the estimation of the baking industry value has been improved through stepwise variable selection, with the inclusion of several variables. The estimation of loaf volume could also be solved by means of stepwise variable selection with the inclusion of QTS25 and MININFRA data. -
Modelling forestation alternatives
35-41Views:556Agroforestry systems are part of the history of the European Union rural landscapes, but the regional increase of size of agricultural parcels had a significant effect on European land use in the 20th century, thereby it has radically reduced the coverage of natural forest. However, this cause conflicts between interest of agricultural and forestry sectors. The agroforestry land uses could be a solution of this conflict management. One real – ecological – problem with the remnant forests and new forest plantation is the partly missing of network function without connecting ecological green corridors, the other problem is verifiability for the agroforestry payment system, monitoring the arable lands and plantations.
Remote sensing methods are currently used to supervise European Union payments. Nowadays, next to use satellite imagery the airborne hyperspectral and LiDAR (Light Detection And Ranging) remote sensing technologies are becoming more widespread use for nature, environmental, forest, agriculture protection, conservation and monitoring and it is an effective tool for monitoring biomass production.
In this Hungarian case study we made a Spatial Decision Support System (SDSS) to create agroforestry site selection model. The aim of model building was to ensure the continuity of ecological green corridors, maintain the appropriate land use of regional endowments. The investigation tool was the more widely used hyperspectral and airborne LiDAR remote sensing technologies which can provide appropriate data acquisition and data processing tools to build a decision support system.
-
Changing of yeaning rates using estrus synchronization and cervico-uterinal artificial insemination in goats
43-47Views:232Breeding aims can be more efficiently and faster achieved by using AI. AI allows higher selection intensities for male selection, adequate genetic evaluation with efficient buck using and profitable farming. Moreover, the AI has very important advantages in animal health, especially in goats. By using our AI technology, these benefits can help the farmers in the practical life.
-
Gene Bank Developed by Induced Mutation for Selection
45-49Views:250Heterosis breeding in maize caused gene erosion by using uniform inbred lines. In order to strengthen the genetic base, we established a gene bank containing lines with broad genetic variability, resistance and adaptability. The maize gene bank is a result of our work in the past two decades.
The gene bank originated from treatments of maize seeds of hybrids and inbred lines with fast neutrons. The 1500 maize lines have great genetic variability which can be exploited after strict assessment and selection. As a result of the past several years, P 26, P 61 and P 62 lines have been released after DUS investigation in 2001. -
Stress Response of four Common Carp (Cyprinus carpio L.) Varieties with Different Genetic Background
26-29Views:184Four different carp varieties were tested for stress reaction, with the help of 10 °C cooling and 100 g/l crowding. The selected varieties represented a broad genetic spectrum of carp species. The stress was monitored by measuring plasma cortisol, glucose and lysozim levels. In each test different varieties showed significantly different reaction to stress. This means that they differ in the trait of general resistance. Thus, this trait can be used in selection programmes and the acquired information helps to understand fish-environment interaction and specific resistance. These traits should be used in selection to improve the breeding of new more tolerant species for intensive farming or for organic production.
-
Investigation of Potato (Solanum tuberosum L.) Salt Tolerance and Callus Induction in vitro
51-55Views:291Potato production plays an important role in Hungary and the other countries of Europe. Consumption of potato products has increased to a large extent during the past several years. We can satisfy market demands with high quality and virus-free varieties.
Results of potato production depend on tolerance/resistance to abiotic stresses. In many cases, increased concentration of NaCl causes yield loss. Selection of salt tolerant varieties proved to be a difficult problem. Nowadays, the salt tolerance of potato varieties can be determined by cell/tissue/ protoplast techniques. Somaclonal variation provides a great potential for selection of lines resistant to salt stress. In vitro shoots and callus, derived plantlets selected for salt tolerance/resistance provide material for micropropagation.
In vitro shoot development of potato (Solanum tuberosum L. cv. Kuroda) was investigated under salt stress (40 mM, 80 mM, 120 mM NaCl) conditions. Shoot heights of plantlets cultured under salt conditions were lower than the control through the investigation. However, the shoot development of plantlets originated from in vitro meristems was almost at the same level as the control under 40 mM NaCl concentration.
There was no significant difference in the in vitro biomass production between control and treatment with 40 mM NaCl concentration. We measured a significant decrease in dry-matter mass under 120 mM NaCl concentration. There is a need for more investigation of different genotypes and for a conclusion as to whether in vitro tolerance could occur under in vivo circumstances in plants originated from somaclones as well.
Under in vitro conditions, we investigated shoot and leaf callus initiation using different culture media with different 2,4-D concentrations. Under dark conditions, callus induction of shoot/leaf decreased as the 2,4-D concentrations increased.
In light conditions, there was a little callus induction, while callus initiation from the shoot from 5 μM to 12 μM 2,4-D concentration showed a significant increase -
Nest-site selection of Hooded Crow (Corvus cornix) in urban environment
35-39Views:387In the past decade Hooded Crows showed a significant growth in Debrecen. The aim of this study was to become acquainted with Hooded Crows nest-site selection in urban circumstances. The research revealed that Hooded Crows are not choosy when it comes to selecting the species of the trees, but we noticed differences regarding nesting height - Hooded Crows living in the city build their nests in higher regions than those living in places outside Debrecen. We discovered a significant difference between nesting heights and the tree species, which is probably due to the different characteristics shown by the given tree species. As for nesting heights, we found that in typical urban habitats there were no relevant differences shown. Samet the situation, when we compared these habitats in pairs, it came to light that nesting heights - when comparing lonely trees - wood segments and tree raws – wood segments - did not show significant differences too, which can be explained by the various conditions provided by the habitats mentioned.
To sum up, during our research the following results emerged:
1. Hooded Crows prefer approximately the same nesting heights in all kinds of habitats, urban environment and tree species.
2. Nesting height depends on the tree species but independent from habitat. -
Selection of Sport- and Racehorses
3-10Views:307The utilisation of the horse has changed from time to time in response to human needs. For a few decades, it has been serving in several equestrian sports more intensively. It has also been proved that the standards for this kind of performance cannot be established in the way certain characteristics, such as the weight gain or milk production of other animal breeds can. Breeding horses for sporting comprises highly complex selection criteria.
Some of these (e.g. external features, temperament, manageability and intelligence) do not put the breeder in a difficult position, but finding the traits that establishes the safety of sporting achievements poses a genetic problem.
The performance of a horse for sports is a highly complex feature, which cannot easily be assessed or put down in figures. In addition, man plays a decisive role in shaping all kinds of performance of a horse at any given time by not only creating conditions for a better performance, but also by playing an active role in increasing it.
The performance of the horse is mostly defined by its general aptitude to movement, ie., the regularity, clear rhythm and springiness of basic types of strides, as well as the ability to move in a naturally balanced way. Training and riding principles are based on these traits. These two together will determine about 70% of the value of the horse and its adequacy for high performance equestrian sports. In order to avoid subjectivity in determining the above variables and to increase the degree of objectivity, competent expert teams (trainers, judges, other riders) are employed to form an opinion on an individual animal.
Assessing horse performance outside races does not seem to be efficient, as owing to the dominant effects of the environment, the indicator of inheritability is hardly above 0.1.
Free jumping is an especially appropriate means for assessing a horse’s readiness and ability to move in an environment free of disturbing factors. In free jumping, it is especially important to judge the style of the jump. The first phase of jumping – as a sequence of movements – lasts from the moment the fore-feet touch the ground until the moment the hind-feet push off, while the second phase lasts from this moment until touching the ground. The most important task in the first phase is to make the angle of the dip of the body by the supporting fore-feet that is necessary for the jump. The quality of the jump is determined by the jumping and adequately expanded hind-legs. The intensity of pushing off and jumping done by the hind-legs can be inferred, and differences between individuals can be discerned from the shaping of the curve by the hocks and the paths of the pasterns in relation to the withers. -
New Integrated Breeding Evaluation Method Used for German Warm-blooded Horses
3-6Views:222In Germany, the new integrated breeding value estimation is based on a multiple-trait animal model, considering simultaneously information from performance test of stallion on station, performance test of mares as well as competition results of sport horses. The objective of this study was to estimated the genetic parameters of the traits used in the integrated breeding evaluation including all German warmblood breeds. The analysed data consisted of 4527, 40670 and six million records for performance tests of stallions, mares and for competition results, respectively. Genetic parameters were estimated with a multivariate BLUP animal model. Heritabilities for traits obtained from stallions tested on station ranged from 0.33 (jumping under rider) to 0.51 (trot) and for the traits from mare performance test from 0.27 (walk) to 0.38 (trot). Genetic correlations between corresponding traits recorded on performance test of stallions and mares ranged from 0.87 (canter) to 0.98 (free jumping). Heritabilities of competition traits from horses (build up for sport) were estimated as 0.12 and 0.11 for dressage and jumping, respectively. The use of all traits for estimation of genetic values of horses is expected to reduce pre-selection and optimal combines all information resources based on the estimated genetic parameters.
-
Phenotypic characterization of Satu Mare Tumbler pigeon breed
31-34Views:343The aim of this study was to determine morphological characteristics of the tumbler pigeon breed of Satu Mare. This pigeon breed was first described in 1932 and was very close to extinction at the end of the 20th century. Data collection was carried out in two stocks having birds from three breeders (Bertalan Juhos, Cosmin Lupu and Werner Hartmann) in Satu Mare. In addition to the breeder, sex and color variety were also evaluated. The performed conformation measurements were statistically compared using multifactor analysis of variance. Lupu’s birds were longer compared to other breeder’s stock, while beak and wing was longer in Juhos’s stock. Thoracic perimeter was smaller whereas queue length was the longer for Juhos’s birds. Cocks’ values were significantly exceeding values of hens, except beak length. Recessive red pigeons had longer body than blue birds. Beak length of recessive yellow pigeons was significantly longer that it was computed for black birds. Wingspan was longer for dun birds than it was estimated for recessive yellow pigeons. These differences show that there is reasonable genetic variability in the breed which is desired in small populations. Due to the variability within the breed, stabilising selection might be favorable, with a special account for avoiding inbreeding.
-
Relationships of Fruit Production and Regional Development in the Northern Great Plain Region
181-187Views:270The role of retaining population in agriculture is stronger and more significant in the long run in the North Great Plain Region compared to other regions. The region has a significant processing industry along with a good basis for producing raw materials, developed food processing capicity and high quality agricultural products typical of the region. The GDP in agriculture, forestry and game management is somewhat higher than the national average.
Variety is of cardinal importance when establishing the quality of horticultural products and determining the product value. The Hungarian breeding results of apple, quince, apricot, cherry, raspberry, red and black currant are promising.
The regulation system of EU the vegetable and fruit market is based on Retail Cooperatives Producers. With the establishment of national vegetable- and fruit production and retail organizations, the market regulation, production and quality development issues of the sector can be handled and solved. Reaching EU standards in fruit production can only be achieved with up-to-date plantation systems and breed selection. A key issue in development is establishing the required financial resources for investments and updating production. In order to reach these standards, significant state subsidies and good credit conditions are needed. By solving these tasks, the sector is expected to become self-financed without government help.
The pursuit of safer production, improving quality and increasing yields require the establishment of up-to-date irrigation systems. The improvement of family farms, motivating land concentration is necessary for increasing average size of plants. Establishing the above mentioned conditions is important since the vegetable-fruit sector is of great significance in the employment of rurally based population, improving their living conditions and executing rural development programs. -
Promising Leuce poplar clones in sandy ridges between the rivers Danube and Tisza in Hungary: a case study
111-113Views:449An intensive integrated research and development work has been carried out on the improvement of Leuce poplars including primarily the native white poplar (Populus alba L.) and its natural hybrid grey poplar (Populus × canescens). More than 70 percent of the Leuce poplar stands can be found on calcareous sandy sites in the Danube–Tisza region, so they play a significant role in the poplar management of this part of the country. The most important task ahead of Hungarian poplar growers is to improve the quality of poplar stands and plantations based on selecting new clones and cultivars. The growth and yield of four promising Leuce poplar clones was evaluated on a marginal site in central Hungary. The clones ‘H 425-4’ (Populus alba L. × Populus alba L.), and ‘H 758’ (Populus alba L. Mosonmagyaróvár 124) seem to be suitable for wood production, while the ‘H 427-3’ (Populus alba L. × Populus alba L. cv. Bolleana) and ‘H 422-9’ (Populus alba L. × Populus grandidentata (Michx)) clones (with decorative stem form) could be better used for tree lines and ornamental plantations.
-
Application of laparoscopic artificial insemination in conventional Lacaune sheep farm using frozen-thawed semen
133-138Views:565The complex anatomical structure of the ewe reproductive tract accompanied with low quality of frozen ram semen for artificial insemination, resulted in a challenge with regard to using superior genotypes for reproductive ovine performance. Hence, improved genetics in ovine management has not been efficiently and widely used especially in undeveloped countries. Therefore, intrauterine semen deposition by laparoscopic insemination should be adopted in the current sheep production systems. Thus, this study aimed to assess the pregnancy rate and lambing rate of ewe inseminated by laparoscopic insemination techniques using frozen-thawed semen. The research used imported frozen semen from two rams of the Lacaune breed. Ewes were grouped according to age in years (1, 2 and 4). Before insemination, the semen was examined microscopically for its motility and viability and thereafter the laparoscopic artificial insemination technique was performed to 19 Lacaune breed ewes using frozen-thawed semen. The overall pregnancy and prolificacy rates were 31.57% and 42.10% respectively. Out of 2 ewes in the 1-year age group that were inseminated, only 1 ewe lambed representing 50%. However, from 16 ewes inseminated of four-year age group, 5 ewes lambed representing 31.25%. Significant difference based on age group was not evaluated due disproportionate of the data, (such that the data included 2 ewes in one-year-old age, 1 ewe in 2-year-old age and 16 ewes in 4-year-old age). Based on the ram semen, 33.33% and 30% of the inseminated ewes were pregnant from ram A and ram B semen respectively. However, in the case of prolificacy rate, 44.44% and 40 % of the ewes lambed from using semen of ram A and B, respectively. There was no significant difference (p>0.05) in pregnancy and prolificacy rates based on semen from the two rams. In conclusion, in this research study, ram semen had no significant effect on pregnancy and prolificacy rates using laparoscopic AI on Lacaune sheep. This could be due to the fact that the rams had very good quality semen. Evaluation of ram semen, accompanied with appropriate ewe selection based on age and rightful deposition of semen could lead to better and more consistent results. Overall this could contribute to the successful application of laparoscopic artificial insemination in Lacaune sheep production systems for enhanced productivity.
-
Investigation of directions of crossing in maize (Zea mays L.)
43-48Views:269In Hungary, we examined eight features of twelve direct cross hybrids over a period of three years. The twelve hybrids were derived from direct and reciprocal crosses of four parental lines. We did not find significant differences in the cases of stalk diameter and leaf number in the average of 3 years in any of the hybrids. Statistically explainable differences in primary branches were observed in hybrids UDH5 and UDH8 and also in UDH6 and UDH11. It was evident in both instances that degrees of heterosis in reciprocal crosses far exceeded those of direct ones. High tassel branch number was dominant over the low one; consequently, parents with higher tassel numbers enforced their effects during the formation of this trait in hybrids. We experienced positive correlation (r=0.67**) between plant height and main ear height. A positive correlation (r=0.89**) was also found between the tassel length of the main axis above the lowest and the upper side branch. We observed a medium correlation (r=-0.42**) between the number of primary lateral branches and plant height. The number of primary lateral branches showed the highest heterosis. These results can be utilized in practical selection and seed production.