Search

Published After
Published Before

Search Results

  • Honey bee mortalities caused by direct and indirect poisoning in Hungary
    101-107
    Views:
    290

    Bee poisoning related top lant production shows an increasing tendency. The poisoning of honey bees most of the times is caused by neonikotinoids and insecticides. The bee pasture has imparied because of the too high bee-density,therefore the beekeepers had to locate their colonies near to the farmland. The pollinating insects experience dimmesurable damages because the ignorance of the agricultural society and the lack of communication. In cases of bee poisoning sometimes it can be intentional. The samples of direct bee-destruction show higher dose of chemical residues than the amount of which they can get during the pollinating activity. In our study we also demonstrate the direct bee poisoning which is caused by endosulfan and dichlorvos.

  • Comparing the yield of maize (Zea mays L.) hybrids in organic and conventional agriculture
    13-17
    Views:
    177

    The European Green Deal was published by the European Commission in 2019. The main aim of the program is to reach net zero greenhouse gas emissions by 2050, making Europe the first climate-neutral continent in the world. To achieve this, criteria are also set for agriculture: increasing the share of land under organic farming to 25%, reducing the use of fertilisers and pesticides. However, the benefits of organic farming are widely debated. The aim of our study was to compare the yield of maize (Zea mays L.) hybrids bred in Martonvasar in two different cropping environments. The silage yields of 20 different maize hybrids were evaluated in a three replicate small plot experiment in an organic field and an adjacent conventional field. The average green mass yield of the hybrids was 36,58 t ha-1 in the organic field and 43,03 t ha-1 in the conventional. The green mass yield in the organic area was 20% lower than in the conventional area, and the dry matter yield and digestible dry matter yield were about 18% lower. Hybrids of different maturity groups responded differently to organic cultivation. The yields of early hybrids decreased more and late hybrids less in the organic farming compared to the conventional production.

  • Carcass and the Meat Quality of Hungarian Lambs
    65-71
    Views:
    123

    The author investigated 153 lambs of nine genotypes originating from breeding flocks, and 50 lambs originating from production flocks. The investigations were performed between 1995 and 1998. The authors discuss the evaluation of comformation and fat cover according to EUROP standards. The authors also investigate the proportion of valuable meat by genotype, and – out of the internal value indicators – the dry-matter, protein, fat, connective-tissue and hemin contents comparing the flavour, aroma, tenderness, and oven loss of the different genotypes.

    The following findings should be highlighted:
    ♦ The Hungarian Merino breed should be improved, as – according to EUROP standards, more than 70% of these animals were rated as quality „R”.
    ♦ Hungarian fattening technology has to be preserved, as the lambs reach the desired slaughter weight within a short period of time, and without over-fattening.
    ♦ Readiness for slaughter, typical of each genotype, has to be defined, and slaughter at proper weight be achieved.
    ♦ It has to be re-evaluated whether the Hungarian Merino is the only breed which can be used in Hungary, as none of the investigations really proved the special characteristics and significance of this breed.
    The author summarizes the findings of the investigation in five tables.

  • Effect of Irrigation on Maize Yield (Zea mays L.)
    30-35
    Views:
    363

    We have been continually examining the fertilizer and irrigation reaction of commonly cultivated maize hybrids for nearly twenty years at the Látókép experimental station of the Center for Agricultural Sciences, Debrecen University.
    Upon evaluating the results, it can be established that year significantly influences the size of yield. Between the years of 1999 and 2002, in the average of applied fertilizers the difference is 3,4 t/ha, but even in irrigated treatments it reaches 3 t/ha. This is more than the effect of irrigation. Of the applied agrotechnical elements, the yield increasing effect of fertilization is the greatest and can even be greater than the effect of year. The yield increasing effect of fertilization can be reliably detected with small and medium doses, but at higher doses a plateau section is reached, where it is not worth applying more nutrients. Cultivation with irrigation can only be done with appropriate nutrient supply, due to the positive correlation of the two factors. The positive correlation also means that if the water supply of the plant declines, less fertilizer is needed for safe production. The two factors (irrigation and fertilization) have to be increased or decreased at the same time.
    According to the experiment, in unirrigated treatments, 90 kg/ha nitrogen and the related phosphorus and potassium are enough, while in irrigated treatments this was 120 kg.

  • Decreasing Energy and Water Use in the Meat Industry
    24-28
    Views:
    78

    The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.

  • Optimized balance between crop productivity, restoration and maintenance of vital soil functions and soil carbon sequestration and storage – the SmartSOIL (FP7) project
    213-215
    Views:
    120

    Soils provide the most indispensable function of supporting the production of food and feed for a growing human population. At the same time they provide a range of regulating and supporting functions related to climate change and removal of greenhouse gases. The majority of the soil functions are closely linked to the flows and stocks of soil organic carbon (SOC); low levels of both flows and stocks may seriously interfere with several of the essential soil functions and thus affect the ecosystem services that soils deliver. Soil degradation is considered a serious problem in Europe and a large part of the degradation is caused by intensive cultivation practices in agriculture. The aim of the SmartSOIL project is to link the results of different scientific fields through a holistic and multidisciplinary approach and as a result develop a decision making tool contributing to sustainable development.

  • Need for measurement of the innovation at Hungarian SMEs
    5-13
    Views:
    149

    Competitiveness studies have shown that innovation could be breakout point for some economies, regions and enterprises. Knowledge acquisition, creation and exploitation of the knowledge base have been an essential element for economic growth. These knowledge-based economic processes come together with the innovation. Measurement of innovation by indicators has been playing a really emphatic role in making strategy whether it is national or EU planning.

    Enterprises have always tried to measure and quantify their innovation activities mostly through the results of their economic process. Companies have generally considered their products as part of the innovation. That was the reason that in most cases they only and exclusively focused on the finished product. Some of them was able to realize that details of the production process must be taken into account in order to the whole innovation activity could be measured.

    That is why I find it important to examine of what the innovativity of enterprises is made of, and in which way they can be measured.
    In addition I was looking for the answer to the questions that how much the measuring method allows you to compare enterprises for further examination.

    The development of measurement methods is an essential moment of the article. As it is compiled for me the most important aspect of innovation, according to the statistical document, the Oslo manual guides you through the measurement methods and operational processes They play a very important role in proving my hypothesis. Overall, our country’s innovation results show those areas where we have high endowments, and also those where are the weaknesses.

    Of course, systems and tools defined by the governing authorities of national economies will have the main role but the activity of the European Union will be the frame in the end, because without subsidies from the EU budget, national budget wouldn’t be enough to implement these aims.

  • Effect of sowing time and planting space on change of yield and protein content of white lupine (Lupinus albus L.)
    85-89
    Views:
    184

    The hinge of the lupine crop cultivation technology is the sowing time and the determination of the breeding area. According to the literature the early sowing (as soon as possible to go to the soil) and larger growing area is recommended for seed production. Based on the results of our 2 years experiment, the effect of sowing time and different spacing is important on yield of white lupine, and the effect of the sowing time is more significant. A decrease in the yield was observed after later sowings. The yield and the rate of its decreasing was varied in one year and among different years depending on wheather condition and sowing time.

    The role of sowing time is significant for protein content of seeds. The average protein content decreased due to the later sowings in 2014, while 2015 the protein content of seeds in early sowing time and of plants sowed 4 weeks later was similar. We measured less protein content in the 2. sowing time sowed 2 weeks later than the first one. In the studied years the average protein content of seeds from different row spaces were not different.

  • Examination of the usability of the MALDI-TOF method in sunflower genetic identity analyses
    33-38
    Views:
    187

    Economically, one of our most important crop is the sunflower. Regarding its production it is essential to use top quality seeds. As the conditions of seed certification and the certification parameters are regulated by laws and ordinances, it is highly important to farmers and seed producers to detect seeds of low quality or dubious origins.
    Nowadays, the examination of the cultivar homogenity of sunflower is based on a reference method of the International Seed Testing Association Rules International (ISTA), Chapter 8. This standard reference method uses ultrathin poliakrilamid isoelectric focusing gel electrophoresis (IEF-UTL, or simply IEF). With this work we have set out to compare the results of MALDI-TOF to the test results – used as reference results – achieved by this reference method. The aim is to develop a new, quick, cheap and reliable method. In this article I summarized the results of some of the experiments that will provide basis for my further work.
    During our previous experiments we have concluded that out of four extracting agents we can get the most protein markers using NaCl acid buffer, 1 propanol buffer.

  • Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
    49-56
    Views:
    187

    In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.

  • Development of a Decision Assisting Soil Information System in Agriculture
    130-133
    Views:
    81

    Hungarian agriculture may be characterized by the industry-like, conventional farming of the past decades. This form of management concentrated exclusively on functions aimed at production. We have to decrease this disproportion, especially when joining to the EU, by reducing the intensive agricultural regions and adjusting to the goals of the 2000-2006 NAEP programmes, forming such an agricultural system which integrates the advantages of both environmental protection and complex agricultural systems based on rational foundations. Nevertheless it’s a rational decision to make the soil information system with an exact spatial informatics background as a foundation of agricultural system, because this promotes easy handling as well the connection to possible subsequent modules.

  • Correlations Between the Crown Sizes, Pruning Times and Fruit Quality of Sour Cherry Cultivars
    90-94
    Views:
    167

    To increase the intensiveness of sour cherry production, i.e. the use of smaller trees, it is necessary to adopt growth-moderating techniques rather than using dwarfing rootstocks. Apart from the traditional technique of using rootstocks that support stronger growth, new or rarely-used techniques and methods must be adopted. Pruning should be carried out in the summer rather than in the winter, the optimal period being 1-3 weeks after harvest.
    A combination of the increase in favourable exposure-time and smaller crown sizes make higher tree densities (tree/ha) and better utilisation of the crown (specific cropload) possible.
    The systematic use of summer pruning leads to better quality fruit.

  • Study of The Amount of Produced Animal Manure and Biogas Potential in a 5, 20 and 40 km Zone around Debrecen
    64-68
    Views:
    86

    The guiding principle for our research is that decentralized energy supply systems should be located near local consumers. One big, local market for energy from biogas plants in Hajdú-Bihar county is Debrecen. In the course of the investigation of biomass suitable for biogas production in the area of Debrecen, this study determines the quantity of biogas producible from animal manure. Municipalities around Debrecen were examined in circles with 40, 20 and 5 km radius. Livestock data of these settlements stem from the Agricultural Census in year 2000, actualized by the county trend of livestock changes. Manure quantity and biogas potential in these places are estimated with coefficients from the literature and our calculations. In the largest circle, about 1.4 million tons of manure is produced, from which round 94 million m3 biogas can be produced. Biomass produced in the settlements and producible biogas shows a remarkable trend of concentration, which supports our recommendation on the system of energy supply.

  • Sour cherry anthracnose and possibilities of the control with special regard to resident Glomerella population in sour cherry plantations of East Hungary
    12-17
    Views:
    153

    Anthracnose is considered one of the most destructive diseases for sour cherry production due to the rapid development of the disease on fruits. Glomerella cingulata (Stoneman) Spauld. & H. Schrenk (anam.: Colletotrichum gloeosporioides (Penz.) Penz. & Sacc. in Penz.) has been the fungal pathogen responsible for anthracnose in last decades. Yield losses greater than 90% may occur under epidemic conditions. C. acutatum (J.H. Simmonds, 1968) strains were isolated of sourcherry plantations in East Hungary and this pathogen, new for Hungarian microbiont became recently dominant. Contrarily to the former species it is certainly transmitted with ants during fruit ripening. About third of strains proved to be cutinase producers that enable them to actively penetrate via cuticule, and these strains infect directly berries of blackberry, grape and tomato as well as plum and apple. Most of cutinase negative strains could also infect these fruits after mechanic injury. All strains of both species produce amylase, cellulase, lecithinase, lipase, polyfenoloxydase and protease in vitro, although the activity of these enzymes highly varied in the medium. The only C. acutatum strains produced noticeable amount of chitinase. Strains, tolerant to recently applied fungicides to control the anthracnose, could be isolated of sour cherry plantations that might be the cause of ineffectiveness of control measures in 2010. The mycofungicide containing mixture of three Trichoderma species in oil carrier could efficiently depress the development of anthracnose in ripening sour cherry.

  • The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
    203-210
    Views:
    201

    The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
    We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid.

  • The situation of agricultural education in the Hungarian language in Romania
    11-14
    Views:
    114

    Our objective was to analyse the situation of Hungarian language agricultural higher education in Romania. Our analyses have been focused mainly on Kovászna county. Following the evaluation of the characteristics of the county, we assessed the situation of Hungarian language higher education in Romania. History is considered important, because Hungarian language agricultural higher education goes back to the 1860s. The best solution for measuring the current reputation was the completion of questionnaires, which was done by 140 randomly selected people in Kovászna county. Following the evaluation and analysis of the questionnaires we found that local agricultural education, plant production and livestock farming are important activities for the locals. However, it is sure that even if they are satisfied with the education, they consider continuous development very important, since it would be a major help for the employment and subsistence of fresh graduates in Kovászna county.

  • Fusarium culmorum isolated from rhizosphere of wooly cupgrass (Eriochloa villosa) in Debrecen (East Hungary)
    93-96
    Views:
    172

    Wooly cupgrass (Eriochloa villosa) is an East-Asian originated weed species and it has been spreaded worldwide by now. The first occurrence of this species in Hungary was observed and published in 2008 nearby Gesztely village (Borsod-Abaúj-Zemplén county, North-East Hungary) than in the summer of 2011 a significant population was discovered next to Debrecen city (Hajdú-Bihar county, East Hungary).

    In 2013 this weed was also reported from Szentborbás village, Somogy county (South-West Hungary). These observations of spreading and its biological features (production of stolons and large number of seeds, moreover herbicide tolerance) indicate that wooly cupgrass (E. villosa) has a great potential of invasiveness, so it may become a hazardous weed not only in Hungary but in all over the world.

    The objective of this study was to identify the fungus which was isolated from wooly cupgrass (E. villosa) root residue samples which were collected after maize harvesting on arable land in late autumn, near Debrecen. The identification of the fungus based on morphological characters of colonies and the features of conidia developed on potato dextrose agar (PDA) plates. After the examination of axenic culture we revealed that the fungus from rhizosphere of wooly cupgrass was Fusarium culmorum. Pathogenicity and/or endophytic relationship between the fungus and wooly cupgrass is still uncertain so pathogenicity tests and reisolations from plants are in progress.

  • Single nucleotide polymorphism analysis in meat-production related genes in broiler chickens
    79-82
    Views:
    184

    In broiler chickens, the intensive selection for growth rate, feed efficiency, body composition (breast muscle weight) traits in the last decades was successful. To improve economically important characteristics, it is possible to use molecular markers associated with meat production traits. The aim of this study was to examine genotype polymorphisms in ROSS 308 broilers for thyroid hormone responsive Spot14α, insulinlike growth factor 1 (IGF1), IGF-binding protein 2 (IGFBP2), somatostatin (SST) and prolactin (PRL) genes. A further goal of this investigation was to study the relationship between the polymorphisms and phenotypic characteristics.

    In the investigated broiler population, the frequency for CC homozygous genotype was 0.77 in Spot14α (AY568628), AA homozygous genotype was 0.80 in IGF1 (M74176), GG homozygous genotype was 0.85 in IGFBP2 (U15086), DD homozygous genotype was 0.60 in PRL (FJ663023 or FJ434669). Only the AA homozygous genotype was found in SST (X60191). Chickens with AC genotype in Spot14α, and with GG genotype in IGFBP2 had higher body weight (BW) and carcass weight (CW), compared to CC and GT genotypes. However, the differences were not significant (P>0.05). There was significant association (P<0.05) between PRL genotypes and body and carcass weight, where chicken with homozygous DD surpassed individuals with homozygous II genotypes.

  • Water relations composition among Egyptian cotton genotypes under water deficit
    5-15
    Views:
    199

    Background: water shortage is one of the major factor effects on growth characters and yield of most crops. Objective: this study was conducted to get to know the reactions of some Egyptian cotton genotypes to water deficit. Methods: The genetic materials used in this study included thirteen cotton genotypes belonging to Gossypium barbadense L., from the Cotton Research Institute (CRI), which was devoted to establishing the experimental materials for this investigation. Results: the ratio of GCA/SCA was less than unity for all studied indices, indicating predominance of non-additive gene action (dominance and epistasis), which is an important in exploitation of heterosis through hybrid breeding. Results: The data showed significant reduction in water relationship characters for all parental genotypes under stress conditions. The Egyptian variety Giza 68 gave high values for most water relationship characters. Data revealed that the greater the value of tolerance index is, the larger the yield reduction is under water deficit conditions and the higher the stress sensitivity is becoming. The parental genotypes Giza 96 showed the highest reduction in yield under water deficit conditions. At the same time, the cross combination Minufy x Australy showed higher values of yield reduction followed by the combinations Giza 67 x Australy. Of the male parents, the Russian genotype 10229 recorded the best GCA values for most water relationship characters. At the same time, the female parents, the old Egyptian genotype Giza 67 recorded the best values and exhibited good general combined for most water relationship characters. The cross combinations Giza 86 x Pima S6, Giza 77 x Pima S6, Giza 94 x Dandra and Giza 96 x Australy showed significant desirable SCA effect for most characters. Conclusion: relative water content %, osmotic pressure, chlorophyll and carotenoids content indicates better availability of water in the cell, which increases the photosynthetic rate. Also, the higher level of proline accumulation in the leaves which was recorded under deficit water suggests that the production of proline is probably a common response of plant under water deficit conditions.

  • Effect of hail net on the water potential of an apple orchard
    109-113
    Views:
    168

     Apple production has seen a decline in yields in recent years, primarily due to ecological factors such as drought, water stress, water scarcity, uneven rainfall distribution, frost damage and hail damage. Ecological factors that are harmful to the plant can be eliminated by human intervention, irrigation or the use of hail net. In our study, we investigated the positive effects of hail net on the development of plant water potential as the vegetation progressed, in non-irrigation area with temperature and humidity. Water potential values were determined using a field osmometer. Confirmed the positive effect of the ice protection net in the apple orchard of Early Gold and Golden Reinders. Our results were supported by statistical analyzes our results.

  • Integration of Transformation Technology and Conventional Plant Breeding of Cereal Plants
    75-80
    Views:
    79

    The integration of plant breeding and plant transformation is needed because we have to create a homozygous genotype of great agronomic value by conventional breeding before the application of genetic technology with which we modify it by using a gene or genome sequence. The aim of integrated plant breeding is to trigger such advantegous changes by genetic technology which can not be achieved via conventional breeding or just with considerably weaker efficacy. By transformation, the plant’s agronomic performance, the efficiency and security of its production will improve and it will enable more versatile uses of the plant. Genetic technology is one sequence of a new plant variety’ breeding. To create a transgenic variety, the isolation of a gene or a sequence of a gene from the donor genome for tranformation, a homozygous plant or target genome that is suitable for transformation and is created via conventional breeding methods, an effective transformation technique and the establishment of the new variety from the transformed, fertile plant are needed. The transgenic plant should be made suitable for establishing a variety by conventional breeding so that it could be produced securely, its growing could contribute to the development of modern, sustainable agriculture, its seed could be produced profitably, it could meet the reqiurements of DUS and that the changes indicated by the transgene could provide such economic advantages compared to the original variety, which have real commercial value.

  • Stress Response of four Common Carp (Cyprinus carpio L.) Varieties with Different Genetic Background
    26-29
    Views:
    82

    Four different carp varieties were tested for stress reaction, with the help of 10 °C cooling and 100 g/l crowding. The selected varieties represented a broad genetic spectrum of carp species. The stress was monitored by measuring plasma cortisol, glucose and lysozim levels. In each test different varieties showed significantly different reaction to stress. This means that they differ in the trait of general resistance. Thus, this trait can be used in selection programmes and the acquired information helps to understand fish-environment interaction and specific resistance. These traits should be used in selection to improve the breeding of new more tolerant species for intensive farming or for organic production.

  • Marginalisation and Multifunctional Land Use in Hungary
    50-61
    Views:
    89

    Our study prepared as a brief version of National Report in the frame of EUROLAN Programme. We deal with the interpretation of some definitions (marginalisation of land use, multifunctionality of land use, marginalisation of agriculture, multifunctionality of agriculture), with sorting and reviewing indicators of marginalisation and finally with the analysis of functions of land use. We suggested a dynamic and a static approach of marginalisation. We can explore the dynamic process by time series and the static (regional) one by cross-section analyses.
    It is very hard to explain the perspective of the future of marginalisation of land and of agriculture in Hungary. The process of marginalisation seems faster in the agriculture in the coming years, but it depends on the utilisation of new possibilities given by the EU financial resources and by the Common Market. At this moment agriculture seems one of the big losers of the accession.
    In the long term we should face considerable challenges in the land use. It is necessary to take into account that there is a supply market of foods and traditional fibre production world-wide. There are limited possibilities to produce and to market for example biodiesel (fuel), bioethanol, or maybe biogas. Thus the environment and landscape preservation becomes more and more real land use alternatives.
    The environmental interpretation of the multifunctionality of land use: activities (functions) of environmental preservation and nature conservation in a certain area, which aim to preserve natural resources by the existing socio-economic conditions.
    Preservation of rural landscapes is the task mainly for land-users, who can be commanded by legal means and can be encouraged by economic measures to carry out the above activity. In the recent past measures of „command and control” type regulation were predominant, however nowadays, especially in the developed countries, the role of economic incentives increases.
    As a conclusion of our analysis we can state that as long as the main land-dependent activities (agriculture, forestry, housing, tourism, local mining) cease to be viable under an existing socio-economic structure, then it is hardly possible to sustain the rural landscape on an appropriate level by non-commodity products (such as environment preservation, cultural heritage, nature conservation, employment etc.).
    1 The study was prepared in the frame of EUROLAN (EU-5 Framework Project), QLK5-CT-2002-02346, as a compiled version of the Hungarian National Report, The national project co-ordinator: Prof. Dr. Gabor Szabo.
    A part of places with high ecological values coincides with the areas with unfavourable agricultural endowments and underdeveloped micro-regions. We think so that the marginalisation preserves the non-environmental-sound activities and hinders the development of multifunctional agriculture and this process can change only by joint utilisation of endogenous and exogenous resources and methods. Thus the successful programmes for agri-environmental protection and multifunctional land use can serve the moderation of negative effects of marginalisation or maybe the marginalisation process itself.

  • Comparative analysis on the fertiliser responses of Martonvásár maize hybrids in long-term experiments
    111-117
    Views:
    94

    The results of experiments carried out in the Agricultural Research Institute of the Hungarian Academy of Sciences clearly show that in the case of hybrids grown in a monoculture greater fertiliser responses can be achieved with increasing rates of N fertiliser than in crop rotations. In the monoculture experiment the parameters investigated reached their maximum values at a rate of 240 kg/ha N fertiliser, with the exception of 1000-kernel mass and starch content. In both cases the starch content was highest in the untreated control, gradually declining as the N rates increased. Among the parameters recorded in the crop rotation, the values of the dry grain yield, the 1000-kernel mass, the protein yield and the starch yield were greatest at the 160 kg/ha N fertiliser rate, exhibiting a decrease at 240 kg/ha. Maximum values for the protein content and SPAD index were recorded at the highest N rate. It is important to note, however, that although the N treatments caused significant differences compared to the untreated control, the differences between the N treatments were not significant.
    In the given experimental year the values achieved for the untreated control in the crop rotation could only be achieved in the monoculture experiment at a fertiliser rate of 160 kg/ha N, indicating that N fertiliser rates could be reduced using a satisfactory crop sequence, which could be beneficial from the point of view of environmental pollution, crop protection and cost reduction.
    The weather in 2006 was favourable for maize production, allowing comparative analysis to be made of the genetically determined traits of the hybrids. Among the three hybrids grown in the monoculture experiment, Maraton produced the best yield, giving maximum values of the parameters tested at a fertiliser rate of 240 kg/ha N. The poorest results were recorded for Mv 277, which could be attributed to the fact that the hybrid belongs to the FAO 200 maturity group, while the other hybrids had higher FAO numbers. Maraton also gave the highest yields in the crop rotation experiment at the 160 kg/ha N level. All three hybrids were found to make excellent use of the natural nutrient content of the soil.
    It was proved that the protein content of maize hybrids can only be slightly improved by N fertilisation, as this trait is genetically coded, while the starch content depends to the greatest extent on the ecological factors experienced during the growing season.

  • Exploration of relations among the members of the supply chain on the basis of relationship indicators
    177-190
    Views:
    153

    Today the various business units on the market are not competing individually against each other, but doing this as members of a supply chain, which are delivering the products or services to the customers with coordination. The participants are cooperating in the process of purchasing, production and sale. Their common objective is to deliver for the consumer demand. The supply chain approach of the enterprises is a business philosophy, which requires trust, commitment, coordination, shared objectives, support from the management, and the understanding and acceptance of the mutual dependence (Német, 2009). The main objective of our study is to analyse the relationships among the players of the supply chain through several relationship indicators, such as trust, economical satisfaction, social satisfaction, compelling power, non-compelling power, dependence, reputation and conflict. The relationship among the players of the supply chain has been analysed from two aspects, through the position and through the role of the players of the supply chain. This study aims to present the results of the analysis highlighting the critical points.