Search
Search Results
-
Role of some agrotechnical elements in the precision crop technology of cereals
241-244Views:116The crop models and precision technology have an important role in the development of winter wheat and maize agrotechnics, which crops have determinative role in Hungarian crop production. The effects of agrotechnical elements (crop rotation, fertilization, irrigation, crop protection, plant density) were studied in our longterm experiments on chernozem soil. Our scientific results proved that the high yields, and good yield stability were obtained in the input-intensive crop models. Maize had lower ecological adaptive capacity than winter wheat. The optimatization of agrotechnical elements reduces the harmful climatic effects so we can increase the yield and yield stability of cereals agro-ecosystems. The yields of wheat varied between 2 and 7 t ha-1 in extensive and 8 and 10 t ha-1 in intensive crop models and the yields of maize ranged between 2 and 11 t ha-1 and 10 and 15 t ha-1, respectively.
-
Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
121-126Views:324Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.
-
Spectral analysis of stress symptoms caused by apple powdery mildew (Podosphaera leucotricha
83-88Views:157An orchard can be examined on the basis of spectral data, using methods with which the reflected radiation can be divided into a large number of (several hundreds) small spectral channel (some nm). Calculated on the basis of such hyperspectral data from different index numbers the water supply of foliage conditions can be well characterized.
The research site is an intensive apple orchard, which located in University of Debrecen, Agricultural Sciences Centre, Farm and Regional Research Institute at Pallag. During my experiments the preliminary evaluation of spectral, non-invasive measurement method are carried out for detecting stress symptoms caused by Podosphaera leucotricha.
Based on the results narrow band greenness indices (NDVI705, mNDVI705, mSR705 and REP) can be used for determination of diseased canopy and for the detection of stress symptoms of Podosphaera leucotricha,. These statements can be utilized in precision plant protection systems, since it can be a basis for such integrated active sensors with LED or laser light source, measuring reflectance at the certain spectral range, which can facilitate real time status assessment of orchards and can control precision fungicide utilization.
-
Using the principles of precision animal husbandry in fishbreeding
283-287Views:181Aquaculture species such as fish, crayfish, molluscs and plats are a wide range of products, with continuously growing demand worldwide. The reasons for this is that they are cheap and easy-toraise protein sources, thus having significance in food supply especially in developing countries in tropic regions, moreover, the premium category foodstuffs in developed high income countries are also belonging to this category. World annual total production of 164 million tons (2009) are made up of two sources: 1) marine and inland fisheries landings that are stagnating for several years and 2) aquaculture which is growing dynamically with annual 6% rate between 2000–2009. The latter is accounting for nearly 45% of the total supply due to the depleting marine stocks caused by overfishing. Aquaculture is growing continuously also because the production is safe and can
be planned well.
Intensive fish production systems are the representatives of precision animal production, several types exist and widespread worldwide. The modern computerized temperate water recirculation plants with several thousand m3 capacity are widespread also in Europe because they make it possible to produce even the most valuable species whole year round. A key issue in the technical/feeding outlay is to meet the demands of the cultured species the best and the operation of the system is to be safe and cost-effective. One condition for this is intensification: enable to produce more product per unit resource input or effort. The facilities need significant amount of energy, thus renewable energy sources are to be favoured for which Hungary has comparative advantages. -
Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
32-37Views:74Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area located in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.
-
New challenges in soil management
91-92Views:189Soil management represents two important tasks that are harmonization of the soil protection with demands of the crop to be grown on the given land under prevailing farming condition. Further goals are to preserve and/or develop the soil physical, biological and chemical condition and to avoid the unfavourable changes of the soil biological activity and the soil structure. Classical authors emphasised the importance of creating proper seedbed for plants. In the physical approach, tillage was believed to play an important role in controlling soil processes. Consequently, the period of several centuries dominated by this approach is referred to as the era of crop-oriented tillage (Birkás et al., 2017). The overestimation of the importance of crop requirements resulted in damaging the soils, which inevitably led to turn to the soil-focused tillage. Since the first years of climate change, as the new trends have raised concern, tillage must be turned into a climate-focused effort with the aim of reducing climate-induced stresses through improving soil quality.The development of soil management has always been determined by the economical background. At the same time, deteriorating site conditions have contributed to the conception of new tillage trends by forcing producers to find new solutions (e.g. dry farming theory in the past or adaptable tillage theory nowadays). Győrffy (2009) recited the most important keywords were listed in 2001 and that seemed to be important in the future of crop production. These keywords (endeavours) were as follows:− Biofarming, organic farming, alternative farming, biodynamic farming, low input sustainable agriculture;− Mid-tech farming, sustainable agriculture, soil conservation farming, no till farming, environmentally sound, environmentally friendly, diversity farming;− Crop production system, integrated pest management, integrated farming, high-tech farming;− Site specific production, site-specific technology, spatial variable technology, satellite farming;− Precision farming.Győrffy’s prognosis proved to be realistic and the efforts mentioned above have mostly been implemented. New challenges have also appeared in soil management in relation to the last decades. The most important endeavours for the future are:1) Preserving climate-induced stresses endangering soils.2) Turn to use climate mitigation soil tillage and crop production systems.3) Applying soil management methods are adaptable to the different soil moisture content (over dried or wet may be quite common).4) Use effectual water conservation tillage.5) Use soil condition specific tillage depth and method.6) Adapting the water and soil conservation methods in irrigation.7) Preserving and improving soil organic matter content by tillage and crop production systems.8) Considering that stubble residues are matter for soil protection, humus source and earthworm’ feed.9) Site-specific adoption of green manure and cover crops.10) Applying site-adopted (precision) fertilization and crop protection. Considering the development in agriculture, new endeavours will occur before long. -
Economics of site specific crop density in precision sunflower (Helianthus annuus L.) production
91-96Views:67In this research, the crop density of sunflower was examined, which, thanks to the tools available for precision crop production and knowledge of the market environment of sunflower production, best fits the heterogeneous areas of the given production zones and meets the economic requirements. These components together directly influence the effectiveness of sunflower production. In the year of 2021 and 2022, we carried out a site-specific crop density sunflower experiment in two fields with the same soil type, by sowing significantly different amounts of seeds within the given zones. We have established that the sunflower, although a plant with excellent adaptability, reacts sensitively to the place of production and the effect of the year, in zones with heterogeneous productivity, and shows a reaction to sowing with a variable number of seeds per zone, even when examined based on economic aspects.
-
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
56-61Views:108The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.
-
Angle-count sampling method for estimating forest stand volume – a practical approach
99-102Views:145Point sampling, which is also known as angle-count sampling (ACS), can be considered an efficient way of estimating the basal area and volume of forest stands. It is possible to use it in forest management: providing more accurate estimates (precision <10%) of site and stand characteristics needed for management planning. 20 black locust (Robinina pseudoacacia L.) stands were selected at final cutting age to determine the regeneration criteria based on their total volume. It was verified that at P=5% there was no difference between the main volume values of stands indicated in the relevant forest plans as well as calculated by the ACS method.
-
Preliminary studies to evaluate the use of spectral data in monitoring of apple orchard parameters
37-41Views:92The introduction/application of precision agricultural technologies has more important role in various fruit growing sectors among others apple growing. Remote sensing methods can detect electromagnetic waves where the green colour of the leaf is responsible for the chlorophyll content. The absorption of chlorophyll is in the wavelength range of 450–670 nm. Samples of apple tree leaves were taken on a weekly basis from the apple orchard at Horticultural Unit of Pallag on University of Debrecen in 2019 summer. Our studies were performed on 2 cultivars (Early Gold, Golden Reinders) and the samples were processed using 2 methodologies: a non-destructive spectral method and spectrophotometric method chlorophyll and carotenoid contents were calculated, which were created into some groups and compared with the spectral values. When the plant begins to lose strong green colour and turns yellow spectral measurements show that chlorophyll content decreases as the proportion of chlorophyll-carotenoid in the plant changes. In case of grouping into intervals, it can be observed that as the chlorophyll content increases the reflectance value decreases continuously due to the strong absorption. Based on the results, close relationship between the pigments can be detected.
-
Basic Research for the Development of Fertiliser Spreaders
52-57Views:79The knowledge of the physical characteristics of fertiliser particles is essential for the constructors and operators of fertiliser distributors. Among physical characteristics, the most important are the frictional and aerodynamic properties for the description of particle movement. Adjustable angled slopes, shearing boxes and various rotating disks are used to identify frictional properties. We have developed a high precision shearing box with digital force measuring cells and a distance signaller (incremental transducer) that we use for slide tests efficiently. We measured the frictional characteristics of 6 different fertilisers: the inner coefficient of friction and the coefficient of friction on ten test surfaces most commonly used in machinery, and we specified the relationship between displacement, loading and the coefficient of friction. We can conclude that the material of the frictional surface significantly influences the force of friction.
However, our experience tells us that the shearing box is not suitable for the measurement of the inner friction, since the examined particles slide on the metal surface of the shearing box in a growing extent in the course of displacement, so it does not measure the real inner friction. Therefore, in our experiment we have developed rotating shearing equipment with a constant shearing surface to identify the inner friction. We tested the equipment with fertilisers and we identified the inner frictional characteristics of 6 different fertilisers. With the developed rotating shearing apparatus we could measure the real inner friction of the particles.
To identify the aerodynamic characteristics of granules, wind tunnels and free-fall tests are used. An elutriator have been developed for our investigation. We have used fertilisers for testing the measuring equipment and we have identified the aerodynamic characteristics of 6 different fertilisers. -
Changes in the relationship between Hungarian Grey cows (Bos primigenius taurus hungaricus) and their calves in the period from calving to four months of age
85-90Views:110The ability of cows to care for their offsprings is a very important trait concerning beef cattle. Maternal instincts are highly influenced by breed, specific cow, and social and rearing environment. In 2020, at the Szamárháti farm of the Tiszatáj Public Foundation, we selected 15 dam-calf pairs and studied them for four months from the birth of the calves. We grouped calf-rearing behaviors according to strength and analyzed the related changes during the program. At the beginning of the relationship, "standing close to each other" (53%) and "suckling" (24%) characterized the pairs. After the first month, "standing or lying separated" grew by 69%, and "vocalization" by both animals fell by 66%. Even though the daily frequency of suckling decreased by 34% as the calves grew older, it remained a typical element of the relationship. Over time, the bond between the animals gradually weakened. This natural process of separation takes a month to complete.
-
Usage of different remote sensing data in land use and vegetation monitoring
7-12Views:114The use of remote sensing in forest management and agriculture is becoming more prominent. The rapid development of technology allowed the emergence of database suitable for precision application in addition to the previously used low-resolution and low data content images. The high resolution, hyperspectral images are not only suitable for separating the different land use categories and vegetation types but also for examining the soil characteristics and biophysical features of plants (Blackburn and Steel, 1999; Condit, 1970). We processed a multispectral satellite image (Landsat 7 ETM+) and a hypespectral areal image (DAIS 7915) about a farm on the plains and evaluated the different image classification methods. During our examinations, we examined the geometrical and radiometrical characteristics of images first, then assigning the training areas, we determined the spectral characteristics of land use categories. We performed a multispectral analysis for checking land use, where we compared controlled and uncontrolled classification systems to check their reliability. We used areal and spectral reductions to make the classifications more accurate and to reduce the length of calculations.
-
Using research findings in precision maize production
227-231Views:195The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers.
In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot. -
Agronomic bases of precision barley production
217-220Views:90To ascertain the importance of individual preciosion factors in achieving yield and quality of malting barley, we established a multifactor
experiment at the research station of the Slovak University of Agriculture in Nitra in 2009 and 2010. Four variants of fertilization, 2 ways of soil cultivation and four varieties 'Bojos’, 'Kangoo’, 'Marthe’ and 'Xanadu’ were observed. From the quality indicators the nitrogen content (%) was observed. The results were statistically analyzed by using a multifactor analysis of variance by using Statistica 8, the program Statgraphics. The difference between years was statistically significant (1.87 t ha-1) in favour of 2010. The difference was also significant between the varieties 'Bojos’ and ’Kangoo’(1.07 t ha-1), respectively. 'Martha’ and 'Xanadu’ as well as 'Kangoo’ (0.56 resp. 0.33 t ha-1). Conventional soil cultivation in
comparison with a minimalization technology, demonstrated a tatistically insignificant increase of yield. Significant differences were obtained between the variants of fertilization. Treatment by using Condit (b-var.) showed a very positive impact in climatic favorable year (2010) with a yield result of 7.42 t ha-1. In comparison with an untreated control, the difference in yield was 0.89 t ha-1. A significant increase of yield was achieved by using the combination of solid fertilizer with foliar fertilizer (LAV + Hakofyt, var.c) 0.47 t ha-1. The crude protein content was statistically influenced by a variety and year. In 2009, the crude protein content was above average (12.38%). Significantly lower attributes were achieved in 2010 (9.90%). From the studied/observed varieties the lowest crude protein content was showed by a variety 'Kangoo’ (1.68%). -
Soil analysis as the foundation of precision nutritive supply in the Hajdúszoboszló region
141-148Views:71Larger cultivated plots are heterogeneous from a pedological aspect. Heterogeneity causes problems during fertilization and harvest. The heterogeneity of cultivated areas can be compensated by fertilization which is based on soil analysis. We carried out research into the changes of the soil on three soil types, from 1966 to 2006, on the cultivated areas of Hajdúszoboszló.
There were no significant changes in pH on chernozem meadow soil and meadow chernozem soil, but the pH increased in 0-30 cm layer on type meadow solonetz soil. The saline content decreased in every examined soil type. Decrease was the largest on meadow solonetz soil. Decline of humus content was the largest (0.95%) on chernozem meadow soil, and the smallest (0.39%) on meadow chernozem soil. The nitrogen content decreased with 528 ppm in the 0-30 cm layer on chernozem meadow soil, and decreased by 186 ppm on meadow solonetz soil. Phosphorus and
potassium content increased in every examined soil types. Rise of phosphorus content was 188.9 ppm in the 0-30 cm layer on meadow chernozem soil. The potassium content rose by 153.7 ppm on this soil type. Phosphorus content increased with 70.8 ppm, and potassium content increased by 57.6 ppm from 1966 to 2006. -
Accuracy of Location Identification by GPS and Possibilities for its Application in Agriculture
157-160Views:78A description of the design and operating principle of the GPS system and the explanation of key terms of telemetric and chronometric measurements is followed by several examples characteristic of the results of factors which may influence accuracy of the identification of geographic location by satellites. In addition, results of accuracy testing of absolute GPS measurements and improvements of accuracy experienced and attributable to the alteration of the periods used for establishing average values are highlighted. Furthermore, we examined certain practical possibilities for the use of GPS systems in agriculture, emphasizing the advantages hidden in the use of GIS-GPS integration, crop mapping, soil maps and gross produce maps, in the application of the VRT (Variable Rate Technology) and in combinations of the same.
-
Stand evaluation, crop estimation and yield analysis of winter wheat for the optimization of yields
103-109Views:126The authors have been carrying out stand evaluation, crop estimation and yield analysis in winter wheat since 2012. The sampling areas were assigned at the fields of the Training Farm of the Faculty of Agricultural and Food Sciences of Széchenyi István University Mosonmagyaróvár according to the structure of the cropping system. According to their observations the value of field emergence is always lower than the laboratory germination. The weak emergence is important because the lower plant density cannot be compensated by the increased tillering in spite of having larger plant growth space. It is proven by the fact that they detected strong productive tillering even at 5 and 10 mm plant spacing while there were single-spiked plants at 40-50 mm plant spacing as well. The analysis revealed that the total ear mass and grain mass of wheat plants bearing two or more ears is almost the double than that of the single-spiked plants. It was a further basic experience that the largest ear of ”multiple-spiked” plants is always heavier than the single ear of one-spiked plants. Plants with intense tillering and more ears demonstrate the importance of proper seedbed preparation and drilling and the significance of sowing good quality seeds. These are the factors that determine field germination and emergence, influence the speed and intensity of initial development and by all these factors the sufficient productive tillering. The authors emphasize the use of exact and objective methods at crop estimation, e.g. the relationship between the ear mass and the yield which is in strong correlation whilst ear length and grain mass are not suitable for a precise estimation. The authors conclude that crop estimation and yield analysis must be inevitable tools of modern crop production and will be particularly important in precision agriculture. These tools also qualify the job done by farmers and helps to identify the areas that require special attention.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:119Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
Stability and development of Transdanubian agricultural enterprises
77-82Views:104Personal fulfilment, financial security, flexibility, relationships, information, rules - these are all hallmarks of entrepreneurship. Furthermore, one more important factor should be added to the list, which enables satisfaction resulting from reliable income and self-fulfillment: this is openness. An open mind to changes, to novelties, and to the workforce is necessary. The central question of the present research is how to effectively develop Hungarian small and medium-sized agricultural enterprises, especially in the Transdanubian region, by utilizing these factors. In addition to production, institutional and price risks, agricultural enterprises, like other sectors, are also affected by massive labour shortages and resource-intensive development objectives. In the research, primary agricultural producers, micro, small and medium-sized enterprises were surveyed through questionnaire in the second and third quarters of 2019. Using the snowball method, both the development opportunities and the risks were mapped in this sector, mostly among growers. The research results show that there is a correlation between satisfaction and development and favorable workplace relationships. These correlations were presented by demonstrating the relationship between technological development, income satisfaction, stable job creation, and the need to try new developments. However, there seems to be an invisible boundary to development in the examined field, which may stem from uncertainty, and yet, it is important to maintain development and learning activity so that the right knowledge and know-how is available to the business when needed. Since the results show that there is a lack of openness to new technologies among the farmers in the studied region, and this may pose a problem in the future in terms of meeting the expectations of precision farming, it is recommended to focus on innovation in the agricultural sector in Hungary.
-
Statistical comparison of soil analysing results of chernozem soils
93-99Views:120The soil fertility was degraded as a result of unreasonable tillage, therefore the application of site-specific nutrient replacement is necessary. It is essential for the application of precision fertilization to know the location, extension, soil properties and nutrient-supply of the different soil types of
cultivated areas.
We collected soil samples from 580 hectares of land in 2006. Soil samples were collected from every 5 ha in 30 and 60 cm depths during Spring from 20.05.2006 to 12.06.2006 and again in Autumn from 09.19.2006 to 02.10.2006. Soil samples were analysed at the Department of Agricultural Chemistry and Soil Science of DE-ATC.
The two examined soils are slightly calcareous, weakly saline, poor in zinc. The calcareous chernozem soil is slightly acid, the content of humus, nitrogen, phosphorus and potassium is medium in this soil. The meadow chernozem soil is slightly alkaline, and properly supplied with humus and potassium, and middling supplied with nitrogen and phosphorus. The meadow chernozem soil is more heterogenous in soil plasticity, lime, saline, nitrogen phosphorus and potassium content and less heterogenous in pH and zinc content than the calcareous chernozem soil.
Standard deviation of measured values in pH, soil plasticity, humus and nitrogen content significantly differ between the examined soil types. The soil plasticity, pH, humus, nitrogen and zinc content significantly differ among calcareous chernozem soil and meadow chernozem soil, but the difference in phosphorus content can be statistically proven only in case of Spring soil sampling. -
Precision crop production and artificial intelligence – the future of sustainable agriculture
47-58Views:398According to Kay et al. (2004, in Shockley et al., 2017), there are seven steps to the decision-making process: 1) Identify the problem or opportunity, 2) Identify the alternative solution, 3) Collect all data and information, 4) Analyse the alternatives and make a decision, 5) Implement the decision, 6) Monitor the results of the decision, 7) Accept responsibility for the decision. The basic question is what kind of tasks we can perform in the decision-making process and what to leave for Artificial Intelligence (AI).
-
Using crop analysis in the precision nutrient supply system of maize
183-186Views:87The effect of the N, P and K supplies of soil on the grain yield and N, P and K status of maize was studied in a long-term mineral fertilisation experiment between 2001 and 2008 and nutrient supply limit values were determined to plant analysis. Based on the interaction between the N concentrtion of maize leaves measured at the beginnig of tasseling and grain yield, the satisfactory limit value of N supply to reach 10–14 t ha-1 yield was between 2.0–4.0%. Leaf analysis at the beginning of tasselling indicated that better P and K supplies were associated with a higher P and K concentration in the maize leaves. Correlation analysis on the P concentration of the maize leaves and the grain yield showed that at a grain yield level of 10–14 t ha-1 a P concentration of 0.20–0.37% represented a satisfactory P supply level. The satisfactory K supply limit value to reach 10–14
t ha-1 grain yield was 1.5–2.6%. -
Mobile Internet Usage Possibilities and Requirement in Agriculture
394-402Views:63In this paper, I looked at the mobile Internet from technological, economical and sociological aspects and then pointed to several agricultural possibilities for theri usage. Examining the effects and driving forces of mobile communication, I can say that it is a very complex system. The social connections of mobile communication and the arising problems show that it affects several areas of everyday life. By looking at the business processes, all costs, advantages and disadvantages can be seen clearly. Overview the mobile Internet from the technological aspect and I discuss related technology and applicable utilities, as well as two possibilities for using wireless Internet: 3G and WiFi. Among the possible usages, I gave several examples to give an impression of all the diverse possibilities this technology offers. There are some really useful applications in customer service, precision farming, transport, agriculture and food industry. Finally, I talked about the mobile Internet in Hungary and in the other EU countries.