Search
Search Results
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:82Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Inheritance of Plant and Ear Height in Maize (Zea Mays L.)
34-38Views:377Plant and ear height are very important characters not only for describing new varieties of maize (Zea mays L.), but for green and dry matter production, and even for grain yield. Significant positive correlations have been reported by various authors between plant height and stover yield, plant height and dry matter yield, and plant height and grain yield. The height of the main ear is also correlated to plant height. It depends on the variety or the environment, but is likely to be the same height within a population. Many environmental and agronomical factors (e.g. plant density, fertilization, pests and diseases) influence the expression of these characters, which are not quality traits. Their expression is controlled by many genes and by the interactions between these genes. The heritability of these traits is high and they show significant genotypic variability and positive heterosis, as reported in many research publications.
-
Determining elements of variety-specific maize production technology
157-161Views:62Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
is increasing and we have to strive for using the appropriate crop rotation.
The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
and the worst crop rotation was the monoculture.
There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
there are hybrids with wide and narrow optimum plant densities.
The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
years as compared to early hybrids.
We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
utilize the genetic yield potential. -
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:88For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Technological development of sustainable maize production and its effect on yield stability
379-388Views:156In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Evaluation of the Green bean variety candidate BU-16
75-81Views:72This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
The effect of agrotechnological factors and the cropping season on sweetcorn (Zea Mays L. convar. saccharata Koern.) production in a humid year
146-151Views:70We have examined the effect of three agrotechnological factors (sowing time, fertilization, crop density) and four genotypes on the yield
of sweetcorn on chernozem soil in the Hajdúság region in 2009. The experiment was set up at the Látókép Research Site of the University of
Debrecen. We have included two sowing times (27 April, 26 May), six nutrition levels (control, N30+PK, N60+PK, N90+PK, N120+PK,
N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) at two crop density levels (45 thousand ha-1).
In the humid cropyear of 2010 the amount of precipitation exceeded the 30-year average by 184 mm in the cropping season; the average
temperature exceeded the same by 0.8 C on the average of the examined months. The circumstances were most favourable for sweetcorn
production with the first sowing time, thus, this was when the yield of all hybrids was the highest.
With early sowing time, the highest yield (23437 kg ha-1 yield) was obtained with Enterprise at 45 thousand ha-1 crop density level at
N150 + PK nutrition level. The highest yield of the other three hybrids was 22253 kg ha-1 (Jumbo) 22286 kg ha-1 (Box-R) and 1873 kg ha-1
(Prelude). With the second sowing time, the highest yield was obtained with Enterprise again (22237 kg ha-1) at 65 thousand ha-1 crop
density level. With this sowing time the yield of Jumbo, Box-R and Prelude was 20888 kg ha-1, 17796 kg ha-1 and 17401 kg ha-1, respectively.
We found that the highest yield was obtained at the highest nutrition levels (N120 + PK, N150 +PK) with the first sowing time, while the same
was obtained at lower nutrition levels (N90 + PK, N120 + PK) with the second sowing time. -
The scientific background of competitive maize production
33-46Views:276The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant density, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.
Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.
Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.
The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:119Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:118From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
The impact of crop year and certain agrotechnical factors on maize yield
13-16Views:113The experiment was set up with eight maize hybrids with different genetic characteristics in 2012. In our study were included hybrids with different length of growing season. We studied the effect of NKP fertilization and plant density on the yield. Comparing to controll treatment it was found that highest yield was at N40+PK treatment. It was three times higher than agro-ecological optimum. Due to the droughty year the effect of plant density it was minimum. The development rate in case of sowing date I. and II. showed an almost identical picture in the scope of the sowing date trial. However, hybrids with excellent adaptability were capable of a yield above average even in this extreme year.
-
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:276Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
Host plant preference of Metcalfa pruinosa (Say, 1830) (Hemiptera: Flatidae) in the north of Hungary
84-95Views:214Citrus flatid planthopper, a native insect to North America had for a long time a scarce economic importance there. However, being polyphagous made little damage on citrus trees and some ornamentals. In 1979 it was introduced to Italy where it established and spread quickly. It is now an invasive alien species continually spreading in South and Central Europe causing considerable damage in fruit crops and various ornamentals. Present study shows the results of a series of observations carried out from 2011 to 2015 at a number of habitats in north of Hungary. The pest could be found at each habitat but the hedge, the tree row, the gardens and the orchard/vineyard were the most infested. Frequency and population density of Metcalfa pruinosa were considerable on Asteraceae, Cannabaceae, Fabaceae, Juglandaceae, Lamiaceae, Rosaceae and Sapindaceae. Typical vegetation could be functionally classified as ornamental plants, trees/shrubs, fruit plants, weeds and feral plants. Feral plants – some of them also invasive alien species – were found at each habitat. Plant species native to America were among them the most populated. As the hedgerows were neglected, and most gardens, orchards and vineyards abandoned, these are excellent conditions for the quick and long-lasting establishment of the pest as well as they may be reservoirs to infest cultivated fruit crops and ornamentals. The hedgerow was situated along a railway line. The length of similar hedges can be merely in Pest county several hundred km, which means M. pruinosa has plenty of opportunity for spreading along the railway and infest agricultural and ornamental cultures. On the surveyed alfalfa and maize fields, accidentally very few nymphs and adults were observed. Although, the population density of M. pruinosa was considerable on many hostplants, economic damage or yield losses could not be detected. Economic or significant damage was observed only on roses, raspberries and stinging nettle. This later is cultivated in Germany and Finland. The applied horticultural oil was efficient.
-
Effect of cropping technologies on the yield of dry bean variety ’Diana’
37-41Views:120An experiment on three dry bean varieties (Start, Hópehely, Diana), using different sowing-times, fertilizers and plant densities was performed on sandy soil in the University of Debrecen, Centre for Agricultural Sciences, Research Institute of Nyíregyháza in 2015. The aim of the experiment was to study which treatment gives the highest yield, and whether the different treatments result in significant differences in the yields. In this paper the dry bean yield at ‘Diana’ variety is analyzed.
The treatments were done with three fertilizer doses and three plant densities at different sowing-times (April 24; May 8; May 18). As a result of the high temperature and the drought during the growth season, the yields we harvested were in low, which shows the ecological sensitivity of the plant we examined.
We concluded that the poorest yield was harvested at the third sowing-time. There was no significant difference in the yields at the first and second sowing- time. Examining all the three fertilizer treatments we applied at the experiment, we achieved the highest yields in the control plots. It might be due to the weak efficiency of nitrogen fertilizer under the extremely dry conditions. The highest yield was harvested at the control treatments during the second sowing-time. Regarding the effect of the plant densities, the highest crop yield was achieved at the treatment using 400 000 germs ha-1, followed by 300 000 germs ha-1 and 200 000 germs ha-1.
-
Stand evaluation, crop estimation and yield analysis of winter wheat for the optimization of yields
103-109Views:125The authors have been carrying out stand evaluation, crop estimation and yield analysis in winter wheat since 2012. The sampling areas were assigned at the fields of the Training Farm of the Faculty of Agricultural and Food Sciences of Széchenyi István University Mosonmagyaróvár according to the structure of the cropping system. According to their observations the value of field emergence is always lower than the laboratory germination. The weak emergence is important because the lower plant density cannot be compensated by the increased tillering in spite of having larger plant growth space. It is proven by the fact that they detected strong productive tillering even at 5 and 10 mm plant spacing while there were single-spiked plants at 40-50 mm plant spacing as well. The analysis revealed that the total ear mass and grain mass of wheat plants bearing two or more ears is almost the double than that of the single-spiked plants. It was a further basic experience that the largest ear of ”multiple-spiked” plants is always heavier than the single ear of one-spiked plants. Plants with intense tillering and more ears demonstrate the importance of proper seedbed preparation and drilling and the significance of sowing good quality seeds. These are the factors that determine field germination and emergence, influence the speed and intensity of initial development and by all these factors the sufficient productive tillering. The authors emphasize the use of exact and objective methods at crop estimation, e.g. the relationship between the ear mass and the yield which is in strong correlation whilst ear length and grain mass are not suitable for a precise estimation. The authors conclude that crop estimation and yield analysis must be inevitable tools of modern crop production and will be particularly important in precision agriculture. These tools also qualify the job done by farmers and helps to identify the areas that require special attention.
-
Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
31-41Views:186The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.
-
Economics of site specific crop density in precision sunflower (Helianthus annuus L.) production
91-96Views:67In this research, the crop density of sunflower was examined, which, thanks to the tools available for precision crop production and knowledge of the market environment of sunflower production, best fits the heterogeneous areas of the given production zones and meets the economic requirements. These components together directly influence the effectiveness of sunflower production. In the year of 2021 and 2022, we carried out a site-specific crop density sunflower experiment in two fields with the same soil type, by sowing significantly different amounts of seeds within the given zones. We have established that the sunflower, although a plant with excellent adaptability, reacts sensitively to the place of production and the effect of the year, in zones with heterogeneous productivity, and shows a reaction to sowing with a variable number of seeds per zone, even when examined based on economic aspects.
-
Allelopathic Effect of Italian Cocklebur on Sugar Beet
74-77Views:79Cockleburs are noxious weeds in Hungary, where they are widespread in row crops, especially in maize, sunflower and sugarbeet. A low density population of these weeds may be harmful because of their large competitive ability, fast growth in early phenological stages, allelopathy, and persistant sprouting.
Allelopathy of Xanthium italicum Mor. was examined during the growing season in 2004. Root and shoot samples were collected at 4 or 5 leaves stage (in the end of May and in the beginning of June) and before flowering (in the beginning of July) before and after rain. Extracts were made in tap water. The test plant was Beta vulgaris L.; its germination, root and shoot growth were evaluated at the 6th and 10th days after treatment.
Most of extracts inhibited the germination of sugar beet. In these experiments the phenological stage of the donor plant determined slightly the effectiveness of the extracts on sugar beet. Generally, significant differences existed between treatments only in cases of concentrated extracts.
Rainfall can modify the inhibitory effect of extracts (especially shoot extracts). Shoot extracts of young plants inhibited stronger germination and growth after rain than before rain. Density of cockleburs influenced the effect of extracts, as well. Generally, differences between the efficacy of extracts was larger after rain.
The results supported the hypothesis that the phenological stage and some environmental factors can modify allelopathy of cockleburs. -
Study on the weeds of maize in the infected field with Cirsium arvense (l.) scop.
131-135Views:111The aim of our research was to establish the difference between the weed flora of maize hybrids sown in different times. Our field trial has been performed nearby Szombathely on a field of an agricultural farm, where two different hybrids were grown. The cold tolerant hybrid was sown at the end of March; the traditional hybrid was sown at the end of April. During the vegetation weed survey was conducted on 4–4 model parcels at two times in case of both hybrids. Cirsium arvense gave the largest weed cover in both hybrids. In cold tolerant hybrid gave 4.53%, in the traditional hybrid gave 56.63% weed cover. Considering the number of shoots per square meter C. arvense was also dominant with 64 plant m-2 density in early sown maize and 49.5 plant m-2 in traditional maize hybrid. At the time of the second weed survey the number of weeds increased significantly. The shoot number of C. arvense in cold tolerant hybrid was almost one and a half times more than at the first evaluation, while in case of the traditional hybrid it is nearly doubled. According to the weed density assessment there were differences between the two hybrids in the rate of G3 and T4 weeds. In early sown maize hybrid (MT Milo) this rate was 50–50% while in traditional hybrid was 90–10%. On 26th June the density of the weeds in the cold tolerant hybrid was two times higher than in the traditional one (Kamelias). Based on the experimental results it can be stated that the effective weed control in cold tolerant, early sowing maize hybrids is very important too.
-
Researches regarding the influence of the some technological elements on water use efficiency in maize from Crisurilor Plain
5-9Views:135Plain and the influence of the hybrid, plant density, crop rotation, nutrient supply, weeds and irrigation on water use efficiency were studied.
Choosing of the hybrid with the best water use efficiency is very important because a hybrid from 500–600 FAO group (Fundulea 376) in unirrigated conditions and a hybrid from FAO group over 600 (Fundulea 365) obtained the biggest water use efficiency; the hybrid Fundulea 365 obtained the highest irrigation water use efficiency, 20.1 kg yield gain 1 mm-1 irrigation water.
One of the most known hybrid in the area is Turda super and the highest water use efficiency was obtained using the plant density of 55 000 plants/ha in unirrigated variant and 70 000 plants/ha in irrigated variant. The highest irrigation water use efficiency, 20.7 kg yield gain 1 mm-1, was obtained at 70 000 plants ha-1.
In maize monoculture was obtained the lowest values of the water use efficiency in unirrigated and irrigated variant: in the wheat-maize crop rotation the values were higher than in maize monoculture and in the wheat-maize-soybean were registered the highest values. The same situation was registered regarding the irrigation water use efficiency.
Farm manure (30 t ha-1) and especially manure (30 t ha-1) +chemical fertilizers (N90P45) determined a higher values of the water use efficiency in comparison with the control. In the variant with organic + mineral fertilization was registered the higher value (19.4 kg yield gain mm-1) of the irrigation water use efficiency.
Water use efficiency was much lower in the variant with weeds in comparison with the variant without the weeds; the differences were of 69% in unirrigated variant and of 64% in irrigated variant, very significant statistically. Irrigation water use efficiency from variant with weeds was lower than the value registered in the variant without weeds; the difference (68%) was very significant statistically.
In average in period 1976–2012, the irrigation determined the increasing in water use efficiency with 22%, 19.4 kg mm-1 vs. 15.8 kg mm-1, but not in all the years caused the irrigation increasing in water use efficiency in comparison with unirrigated maize.
The results research emphasized the need of the optimization for technology elements studied and a better water use efficiency will be obtained.
-
The effect of sowing date and plant density of winter oilseed rape (Brassica napus var. napus f. biennis L.) population
213-215Views:160The experiment has been set up in the University of Debrecen Látókép Experimental Station in three different years (2014, 2015 and 2016), three different plant densities 200, 350 and 500 thousand ha-1, four replications of the same nutrient supply with using a line spacing of 45 cm. In the experiment, the fore crop was winter wheat in each year. The amount of weeds was observed five times in the last experimental year (2016/2017). In the three experimental years, the highest yield was harvested from the early sowing plot with the highest plant density. On the basis of the Pearson’s correlation analysis there was significant negative correlation (r=-0.583) between the effect of the annual year and yield of the hybrid.
-
The role of Debrecen maize hybrids in competitive production
19-21Views:60I examined the effects of plant density and fertilisation on the yield of the maize hybrid Debreceni 377 SC, developed by the Agrárgazdaság Ltd., using the 3 year data sequence of a long term experiment set up at the Látókép experimental station of DU Center for Agricultural Sciences in years with average precipitation supply.
Based on the evaluation of my research results, I found that the application of higher plant densities was more favourable in years with average or higher than average precipitation supply. During the examination of fertilisation effects, it was verified that surplus yield was realised in most cases where smaller fertilisation dosage, 120 kg per hectare active substance was applied. -
Using research findings in precision maize production
227-231Views:195The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers.
In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot. -
Challenges and limtations of site specific crop production applications of wheat and maize
101-104Views:120The development and implementation of precision agriculture or site-specific farming has been made possible by combining the Global Positioning System (GPS) and the Geographic Information Systems (GIS). Site specific agronomic applications are of high importance concerning the efficiency of management in crop production as well as the protection and maintenance of environment and nature. Precision crop production management techniques were applied at four locations to evaluate their impact on small plot units sown by wheat (Triticum aestivum L.) and maize (Zea mays L.) in a Hungarian national case study. The results obtained suggest the applicability of the site specific management techniques, however the crops studied responded in a different way concerning the impact of applications. Maize had a stronger response regarding grain yield and weed canopy. Wheat was responding better than maize concerning plant density and protein content performance.
-
The role of the hybrid-specific technological recommendations of maize in precision crop production procedures
297-302Views:87The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturity groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.