Search
Search Results
-
Spring frost effects on 30 sweet cherries varieties grown in North Italy
33-37.Views:165After a spring frost occurred in second half of March 2008, with temperatures below 0°C for 8 days consecutively and an absolute minimum of -5.5°C, a lot of observations have been made on the sweet cherry flowers damages. In three different orchards “Italian palmetta” trained on grassing ground soil, the percentage of the flowers killed by frost, was detected and recorded considering the different genotypes and flowers height from the ground. Furthermore, in one orchard only it was possible to find relationship between flowering stage and frost damage. The results clearly confirm our previous works about the highest mortality of the flower in the upper part ( > 1.50 m) of the canopy and in the full bloom open flowers. So, in this area, the easiness of agronomic operations, like pruning and, especially, fruit harvest, due to the crown proximity to the ground, is cancelled by the frequency of spring frost.
-
Technologies developed to avoid frost damages caused by late frost during bloom in the fruit growing regions of Siófok and Debrecen
99-105.Views:341The aim of the study was to fi nd out which of the methods used to avoid damages of late frosts would be the most effective for the fruit growing practice. Three technologies have been tested in the regions of Siófok and Debrecen-Pallag. The antifrost irrigation proved to be the most advantageous. For that purpose microjet sprayers are used, which are thrifty and do not need for that purpose large containers. With the aim to secure an even distribution of water, the sprayers are distributed on three levels: above and inside of the crown as well as on the level of trunks. On a large scale, a single microjet above the crown level would be suffi cient. By means of a detailed analysis served to set the optimum intervals between spraying phases: with each 15, 10, 5 and 3 minutes during half a minute. The synchronous presence of water and ice below the freezing point, the released freezing heat plus the water used much above the freezing point (9–10 °C) altogether maintains the temperature above around 0°C near the fl owers or growing fruitlets, meanwhile, the surrounding air cools down to –8 °C. The effectiveness of the generally used anti-frost would be increased substantially by the former application of cooling irrigation, which delays the blooming date. The Frostbuster represents a new technology developed for the same purpose of frost defence. It uses butane burning and produces high (80-90°C) temperature with a strong blast of air. On the protected area sensors have been distributed for measuring temperature and relative humidity. The means of the measurements proved a rise of temperature, which was suffi cient to save the fruit trees until the difference is less than –3–3.5 °C. Our analyses stated that paraffi n candles avert the frost until –4 °C. Its success depends largely on the intensity of air movements. A small wind would be enough to frustrate the effect. The results show clearly the utility of Frostbuster and paraffi n candle combined is approved.
-
The tests of effectiveness of Frostbuster under excessive weather conditions in an apricot plantation
87-91.Views:240Frostbuster is a new system, engine and technology, developed to protect fruit plantations from the frost damage. In order to raise domestic experiences and measurements, experimental approach has been initiated to prove the utility of the system under excessively low temperature in the plantation of the Siófoki Gyümölcstermesztési Zrt (Fruit Growing Co. Siófok). The first opportunity ensued in the night of February 23-24, 2011, when the temperature sank to 12°C below zero. The question was to see whether we could prevent the drop of temperature by the frostbuster technique. The margin of an anticyclone staying on East Europe secured a stable condition to make tests. The only difference from the imaginable conditions of dangerous frosts was the heat keeping capacity of trees was weak, much inferior than compared with trees in full boom. As a consequence, the tree rows represented much lower heat-capacity and cooled down much quicker than blooming trees in springtime, i.e. their temperature was more variable. The other difference was, compared with an episode in spring that the hard frost lasted much longer than usually in spring. For testing the system, those conditions had even more advantage. Six meteorological stations helped us in measurement. Data-collectors were timed to 1 minute distances and the bulk of data proved to be beneficial for testing the Frostbuster. The results prove that the system is adequate to keep the temperature continuously higher than the surrounding field under excessively low temperatures. Further measurements are still needed to find the optimal solutions fitting to the growing site and its microclimate. Results presented offer a basis of further proofs.
-
Effect of over tree cooling irrigation on ‘Bosc’ pear orchards microclimate
153-156.Views:205Irrigation in some countries is a horticultural practice mainly used only to supply water. At the same time the use of microsprinklers have a powerful infl uence on the changes of temperature in orchards. When the air’s temperature is high (about 20 °C or higher) the evaporative cooling irrigation signifi cantly decreases the plants’ surface temperature and air temperature. The cooling effect is stronger when the air is dryer. By using cooling irrigation regularly, canopy temperature can be decreased so that the beginning of blooming can be delayed. Also if the blooming is early and frost probability is high, serious damages can happen in orchards. The benefi cial effect of cooling irrigation is the temperature reduction and frost protection. In March 2010, one month earlier than the expected blooming an irrigation system was established to produce anti-frost treatment and regulate the micro-climate of a Bosc pear orchard which belongs to the University of Debrecen (Hungary). The objective of sprinklers was to cool the air by increasing water evaporation and relative humidity. The position of the micro-sprinklers was planned in three levels (around the tree trunks, a few cm near to the soil surface, in the crown region and above the crown, a half meter higher). The results showed that the water sprayed in the orchard by micro-jets infl uenced decisively the temperature of the plantation. At higher temperatures (around 20 °C), the drop of temperature may attain 5–7 °C. A low relative humidity of the air may increase the relative effect. When water was applied at intervals of 15 minutes for ten times a day from 8 am to 18 pm, the air, fl owers and bud’s surface temperature could be kept low. At certain days when the temperature was higher than 10 °C, irrigation was used at night time in similar 15 minutes intervals, from 18 pm and 6 am. The beginning of bloom could be delayed for more than ten days. The Bosc pear variety blooming dynamics was characterized by a logistic curve in the treated as well as in the control plot. In the treated plot, the curve was steeper than in the control one in spite of the equal temperatures measured in the plots. Under Hungarian climatic conditions, the method was successfully used to delay blooming dates. The main result was the diminution of the frost damage in the spring that assured pears yields.
-
Cooling irrigation as a powerful method for microclimate modification in apple plantation
33-37.Views:244Irrigation in some countries is a horticultural practice mainly used only to supply water. At the same time the use of microsprinklers have a powerful influence on the changes of temperature in orchards. When the air’s temperature is high (about 20 °C or higher) the evaporative cooling irrigation significantly decreases the plants’ surface temperature and air temperature. The cooling effect is stronger when the air is dryer. By using cooling irrigation regularly, canopy temperature can be decreased so that the beginning of blooming can be delayed. Also if the blooming is early and frost probability is high, serious damages can happen in orchards. The beneficial effect of cooling irrigation is the temperature reduction and frost protection. InMarch 2010, one month earlier than the expected blooming an irrigation system was established to produce anti-frost treatment and regulate the micro-climate of a Gala apple orchard which belongs to the University of Debrecen (Hungary). The objective of sprinklers was to cool the air by increasing water evaporation and relative humidity. The position of the micro-sprinklers was planned in three levels (around the tree trunks, a few cm near to the soil surface, in the crown region and above the crown, a half meter higher). The results showed that the water sprayed in the orchard by micro-jets influenced decisively the temperature of the plantation. At higher temperatures (around 20 °C), the drop of temperature may attain 5–7 °C. A low relative humidity of the air may increase the relative effect. When water was applied at intervals of 15 minutes for ten times a day from 8 am to 18 pm, the air, flowers and bud’s surface temperature could be kept low.At certain days when the temperature was higher than 10 °C, irrigation was used at night time in similar 15 minutes intervals, from 18 pm and 6 am. The beginning of bloom could be delayed for more than ten days. The Gala apple variety blooming dynamics was characterized by a logistic curve in the treated as well as in the control plot. In the treated plot, the curve was steeper than in the control one in spite of the equal temperatures measured in the plots. Under Hungarian climatic conditions, the method was successfully used to delay blooming dates. The main result was the diminution of the frost damage in the spring that assured apple yields.
-
Microclimatic studies on different aged apple plantations
7-11.Views:187The purpose of measuring parallel canopy and out of canopy microclimates was to find out in what extent climatic parameters measured in different aged canopis differ from each other and from the values characteristic to out-of-canopi areas. The importance of phytoclimatic researches seems to lie in the fact that if the reactions of fruit trees towards meteorological elements are continuously followed, we have the possibility to provide growers with information. These pieces of information are like defining the optimum time of phitotechnical interventions (summer pruning, sorting sprouts, thinning fruits, etc.), the necessity of applying mulching, defining the method and time of irrigation and applying plant protection activities. By means of phytoclimatic researches, it is possible to react to unfavourable meteorological impacts within a certain extent. It is also possible to successfully reduce the risks of late spring and early autumn frost damage, as well as the risks, content and measure of experienced heat and water stress conditions by finding out about the physical characteristics of the canopis' internal area.
-
Work quality assessment of a cherry sorting machine
57-62.Views:232The conditions of the cultivation of marketable cherries are diverse. Choosing the production site on the basis of the climatic conditions, selecting the most appropriate variety taking into account the region and the purpose of the production, utilization of the optimal production method, to ensure the required water and nutrients supply, frost and hail protection techniques, modern technology in crop protection, and professional performance of harvesting and handling, to name just a few of the most important issues. The objective of present study is to determine the qualitative characteristics of the UNITEC cherry sorting machine.
-
Fruit bearing shoot characteristics of apricot and sweet cherry cultivars in Hungary
107-110.Views:252: Our study was carried out on 23 apricot and 9 sweet cherry cultivars in February 2005. Fruiting laterals were classified into four groups (0-10 cm, 10-20 cm, 20-40 cm and >40 cm) and then the density and setting of flower buds were evaluated and expressed as bud/cm. The flower bud density of four types of fruit bearing shoots and the changes in the frost resistance were studied. Shoots were collected from a young orchard in Gone (apricot), Siófok (sweet cherry) and Nagykutas (sweet cherry). There were significant differences among the cultivars in the density of flower buds. The number of flower buds/cm shoot length ranged between 0.91 and 2.20 in the average of the different fruit bearing shoot types on apricot. Based on the results, the bud density of shorter shoots is generally higher on apricot, but this is not valid for all cultivars. For cvs. Magyarkajszi and Ceglédi bíborkajszi, the highest flower bud density was detected on shoots of medium length (10-40 cm). There were fivefold and almost twofold (1.85) differences in bud density among cultivars on shoots shorter than 10 cm length and longer than 40 cm length, respectively. The ratio of the bud densities of the different types of shoots also ranged between wide boundaries. For cvs. Bayoto, Toyesi and Toyiba this ratio was 2.5-3.5, while for cv. Magyarkajszi it was 1.3.
In the average of fruit bearing shoots on sweet cherry, cv. Bigarreau Burlat (1.10 bud/cm) and cv. Germersdorfi 45 (0.61 bud/cm) had the largest and the lowest flower bud density, respectively. Among the fruit bearing shoots, the largest flower bud density was in the group of 0-10 cm fruiting laterals. Among cultivars, cv. Bigarreau Burlat had the largest bud density. In the groups of n- i 0 cm, 10-20 cm, 20-30 cm and 30-40 cm fruiting laterals, the lowest flower bud density was for cv. Linda, cv. Germersdorfi 45, cv. Ferrovia and cv. Sunburst, respectively. On cvs. Van and Bigarreau Burlat, large numbers of double-set flower buds were observed on the fruit bearing shoots longer than 20 cm. Fruit setting differed on the different types of fruit bearing shoots, with the lowest value measured on above 40 cm shoots. The highest fruit setting was observed on cv. Katalin, while the lowest value was measured on cv. Germersdorfi 3.