Search
Search Results
-
Sport Consumption, Fan Engagement, Sport Statistics – Post-specific Passing Characteristics in Football
Views:626Digitalization and the explosive development of technology have led to significant changes in football. Due to the increasing amount of data available through various sensors and other data collections, we can observe the rise of data-centric, analytical and statistically oriented thinking in football, which is also of interest to fans. Digitalisation is also closely linked to sports consumption, which is why we have seen significant changes in this area in recent years. The pandemic has further amplified the speed of digital transformation in the sports industry. One of the most important contents for sports organizations and their fans is the in-depth sports statistics and analysis that enhances the consumer experience. In our study, we examined the most common performance indicator in football, passing. Our goal was to examine the position-specific pass characteristics in detail, therefore we also examined different pass properties in our research. As a model for our analysis, I chose the premier league, which has the highest UEFA coefficient. The three rounds (rounds 30-32) of the championship season 2019/2020 have been recorded and analyzed in terms of passes. there was a significant difference between the average number of passes per game between defensive and offensive players (t=7,988, p<0.05). There is also a gradual decrease in the number of passes attempted per match and the accuracy of the pass in the examination of the middle positions when examining the positions in the depth of the pitch. For both pass accuracy and average pass count, the decreasing ranking corresponds to the position of positions on the pitch (order: 1, central defender 2, defensive midfielder 3, inside midfielder 4, attacking midfielder 5, striker). In the value indicator of the position for passes, offensive positions performed more effectively than defensive positions. The extreme positions also stand out among the attacking positions, where in the case of the position value per pass number, 23.3% of the total test was completed and 14% of the amount of the established position value indicators was provided by these posts. Overall, our study points to post-specific pass characteristics and, knowing this, we can state that the comparison of players' passing performance is relevant if the players are in the same or related positions.
-
Properties of Cellulose Sheets Modified with Potassium-Humate and Copper (II)-Sulfate
276-285Views:98Throughout our research we have made potassium-humate from brown coal of Dudar. With potassiumhumate and copper(II)-sulfate we made test sheets of linter cellulose fibers. The surface energy, surface wettability, CIE Lab color-coordinates changing, bending resistance and tensile strength of the produced test sheets has been examined. There was no big difference in the different samples during surface energy and wettability testing. Examination of mechanical properties suggests that potassium-humate content increases bending resistance of the test sheets. The bending resistance of samples increased by 32%, 100% and 336% compared to the control test sheets while adding potassium-humate.
-
Demand and Supply in the Talent Market
142-149Views:232In Hungary, the emergence of a talent market for organizations is due to the growing demand for talented workers. The talent's definition, the exploration of the factors affecting the talent market's demand and his supply are necessary to the overview. With the emergence of the talent market, we will also carry out an important analysis of the changes in the labor market in Hungary as well as the shortage of labor shortages. In the labor market today, different generations are present, who have different expectations for their employer and work environment. The lack of skilled workers is attempted by organizations with different methods. One of these is the ability of companies to become a talent-magnet, resulting in a higher number of employees in their area of activity. In areas where labor shortages are high, more and more attention is paid to automating processes. During the research, I worked on the related literature and studies to determine the factors influencing the talent market.
-
Experimental Study of Connections with Hardwood Studs
26-34Views:119Attitude change is needed in design of timber structures. Truss girder made of timber elements wi th small cross sections can be used on large spans. Constructing structures with the use of these prefabricated trusses reduces the need of in-site work, and makes the use of ti mber structures economic. Rods of truss can be connected with the use of hardwood stud. On this way all steel components can be eliminated from the truss, so it can be used in aggressive environment as well. Dowel type connection, with hard wood stud is the subject of the present research. Hardwood studs were investigated individually and also as the part of separated connections of the truss girder.
-
Do Changes in the Economic Role of States through Privatization matter?: The Brazilian Case
125-136Views:154In market economies, the subject of scientific research is the extent to which the state can contribute to the sustainability of development. However, the question is to know where the boundaries of the market and the role of the state lie. The study briefly introduces different views of the state's economic role and how states have changed the proportion of their entrepreneurial assets. Among these, it highlights privatization, which is one of the significant segments of today's economic policy practice at both micro and macroeconomic levels. It then describes Brazil's economic circumstances that led to the formulation of a proper size privatization program. Finally, the socio-economic factors that, according to the author, make the realization of Brazilian privatization plans uncertain presented.
-
Examination of Z Generation’s Motivation and Expectations on Higher Education
1-13Views:497Today’s students at secondary schools, the so-called Z generation will be the customers in higher education in the near future. Members of the generation 'Z' were born between the early 1990’s and at the end of the 2000’s and significantly differ from the previous generation Y. They are called as Sharing Generation and Digital Generation as well. They have special learning habits and special expectations about learning, teaching and theories. These facts bring up a question about suitability and efficiency of traditional and actual methods in higher education in connection with their teaching and personal development. In this research expectations of students in year 11 will be examined about the higher education in general and with special regard to the business higher education.
-
Transformation of the Decisional Leadership Role
26-40Views:78Leadership decision-making is important for the successful functioning of organizations, so it is necessary for leaders to understand the factors that impact their decisions. Decision-making is always the responsibility of the leader, but in a changing world, it becomes an even more crucial factor for success. Making good decisions requires time, experience, and thorough problem-solving skills. In my research, through the analysis of scholarly sources, I have identified several role factors that clearly influence the decision-making process and its implementation. Furthermore, I have developed a self-designed questionnaire to examine the decision-making role in modern organizations. I analyzed the data from 230 respondents using various statistical methods. Based on my findings, conflict management, risk-taking, and a thorough understanding of the problem strongly determine leadership decision-making processes. The ability of leaders to effectively manage conflicts significantly impacts their decisions. Risk-taking is also of key importance, as leaders need to recognize the risks associated with a given situation and make decisions accordingly.
-
Investigating the Effects of Active Cooling in 3D Printing
39-47Views:1313D printing is an increasingly widespread manufacturing process. With the development of machines and materials, the technology is becoming more accessible and easier to use. However, the technology's specificities mean that it requires knowledge of manufacturing technology. In some cases, it is necessary to solidify the freshly deposited layers as soon as possible in the event of large overhangs. This can be achieved by active cooling, which in turn can affect the material properties of the part. This research investigates the effects of active cooling during production.
-
Compliant Mechanisms in Progress and Development Of Modern Technology
186-189Views:104In this paper, the compliant mechanisms will be presented. There will be presented some representative works that have brought progress and development in modern technology. Examples will be presented from simple concepts such as a tweezers, staples, to mechanical clutches, pointer and micro-compliant mechanical structures.
-
Interchange of Heat in Saw Disc Body During Cutting
488-494Views:112The paper presents the experimental results of a research aimed at the distribution of the temperature on the circular saw blade body. The temperature was measured at two distances from the centre of the circular saw blade body (70 mm, 140 mm) by means of an infrared thermometer. Two circular saw blades with the diameter of 350 mm and a variable adjustment of the body (with slots and without the coating, with both slots and coating) were used for the longitudinal sawing of the spruce wood (Picea excelsa) with the thickness of h = 37 mm. Feed speeds ware vf1 = 14 mpm, vf2 = 17 mpm and vf3 = 20 mpm. Cutting revolutions n = 4100 /min. were constant. The measured temperature was in the range from 21 °C till 27 °C. The highest measured temperatures were recorded on the circular saw blade with the slots and coating.
-
Bread Making and Consumption Habits in the Gluten-free Diet
252-262Views:276Celiac disease is a genetic autoimmune disorder characterized by sensitivity to gluten. Gluten is a protein found in many grain products (wheat, rye, barley and oat). When a person with celiac disease consumes gluten, his/her immune system perceives the gluten to be a harmful substance and reacts negatively. The only treatment for people with celiac disease is lifelong adherence to a gluten-free diet. Bread is a basic and frequently consumed food made from basically gluten-containing grains. Bread plays essential role in the Hungarian dining habits, thus bread consumption in the gluten-free diet is a challenging question. The aim of our empirical research was to investigate the gluten-free bread making and consumption habits of people following a gluten-free diet.
-
Impression Management Strategies Used by Foreign Students
127-132Views:106In this paper, we examined a general human behaviour, the impression management among university students. People are interested in how others think about them. At the organizational level, they can also benefit from being positively judged by others. Effort to create this positive image is Impression Management, which has several measurement options. In this paper, we conducted research on the impressions strategies used by first year international students of University of Debrecen, Faculty of Economics and Business Administration, Bachelor in Business Administration and Management programme. In our analysis we used the questionnaire consisting of 22 questions developed by Bolino and Turnley. We analysed what strategies are typical for the examined student group and to what extent? Are there differences in the strategies employed by men and women and depending on their cultural background.
-
Fémhabstruktúrák elemzése és geometriai modellezése
145-152Views:121The development of an efficient procedure for 3D modelling and finite element simulation of metal foams is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the center of the research. The aim of this project is to analyze the related literature and to adapt the results may be considered
-
The Efficiency of Intellectual Capital as a Crucial Factor of Innovation
419-428Views:244In today's global economy, there is a substantial shift from manufacturing to services, which challenges both economic policymakers, business stakeholders, owners, suppliers, competitors, and ordinary people: restructuring will encourage all economic players to learn how to adapt to new trends. That is why our research focuses on innovation and the ability of companies to create value. The IT sector is currently one of the fastest-growing and most innovative sectors within the service industry. The success of IT companies is greatly determined by their ability, how to make effective use of their intangible assets at their disposal, including intellectual capital, which is defined as a non-financial asset. So the question may arise: how is it possible to quantify and in monetary terms the intellectual capital of the companies to be examined? That is why, we calculated for the most successful Hungarian IT companies the widely recognized index, the VAICTM index, for which domestic calculations are not yet available. Indeed, this indicator eliminates the lack of information stemming from reporting standards by the methodology relying on publicly available financial reporting data. The indicator itself is a top indicator whose two main sub-indicators quantify the effectiveness of intellectual capital and physical capital.
-
Utilisation and Quality Management of Power Plant Fly Ash
329-337Views:172Over the past decades, both the residential and industrial energy demand has increased due to the continuously growing consumption and production. As a large share of the electricity is still produced using fossil fuels, the utilisation of the by-products is a contemporary and pervasive issue. Fly ash is generated in large quantities in coal-fired power plants and has been proven to be an appropriate raw material for various industrial uses. Among others, it is applicable as an additive and lightweight aggregate in the cement and concrete industry, can be used for CO2 sequestration, glass foam production, catalyst production, or as a base material for geopolymers, as well. Geopolymers are inorganic polymers produced via the reaction between solid alumina and silica containing or alkali silicate materials in alkali media. Due to their numerous advantageous properties and wide variety of utilisation possibilities, research on fly ash base geopolymers became widespread topic. The quality of fly ash is determined by technical requirements, and the degree of quality control requirements depends on the final use. In certain fields of applications, standards and regulations have already been created to ensure the consistent quality of the final products made from fly ash, e.g. in the cement and concrete industry. There are various methods for fly ash processing, however, the methods to achieve the necessary properties are not standardised.
-
Markmyprofessor: the More the Better?
232-243Views:1201Student evaluation of faculty members is a current topic both internationally and in Hungary, partly due to the massification and partly due to the marketization of higher education. One of the evaluation methods is the internet-based voluntary rating which was started by ratemyprofessors.com in the U.S.A. and whose Hungarian counterpart is markmyprofessor.com. Research studies on the U.S. website – among many other critics – established that reliability of this evaluation method highly depends on the frequency of ratings: if an individual tutor is evaluated by more students, then the standard deviation of the ratings is smaller. The previous conclusion about the U.S. website is tested in our study based on Hungarian data. Our main result is that many of the experiences about markmyprofessor.com echo the previous findings about ratemyprofessors.com. Beside this in the Hungarian sample the higher response rate is associated with lower average ratings.
-
„Forradalmi” változások a menedzsment területén
1-15Views:144Development of the Science and practical application of the results created big changes in the nontradicional areas too. The „Health industry” was developed. The results of the physics, chemistry, biology and mikroelektronics etc. helped to develop some new methods of diagnosis, operation etc. The „money industry” was developed too. Our opinion is, that the most important cause of the economic crisis is a non regulated well of the „money industry”. The „knowledge industry” was developed too. The „knowledge industry” contains all level of teaching and Research + Development + Innovation. Our analyze shows that the Innovation is the most important factor of the economic Development of Society. The new scientific results created big changes in area of the Management. The „Management Science” was developed as an independent area. Some management specialists developed some management methods (eg. Value Analysis, Risk Management, TRIZ, Lean methods etc.) for efficient allocation of sources.
-
Developing of Analytical Methods for Determination of Greywaters’ Detergent Content
42-47Views:194In our research we improved the technologies for the determinations of greywaters’ detergent content. We examined the quantity of anionic detergent (ANA) in synthetic greywater with Hyamine reagent using two-phased titrimetric method. We added to the synthetic greywater samples phenolphthalein indicator, acid mixed indicator and chloroform. After we shaked the mixture, and we got two separated phase. We titrated the mixture with cation active Hyamine reagent. The quantity of the chloroform and the quality of greywater samples (syntetic and real) were also changed in these experiment to determinate the actual ANA content. It was shown that the applied method is representative and reliable, too.
-
Challenges and Benefits of Working in Teams – Interpersonal Interactions in Health Care
11-19Views:248Teamwork has become the accepted way of doing one’s job. This is so true even profession’s that were considered an exception are shifting towards teamwork. Apart from the well-known benefits, there seems to be a downside of the enforcement of this work strategy. Conflicts, frictions, frustration in working groups can affect the dignity, psychological or physical integrity of team members, generally referred to as psychological harassment, workplace bullying or mobbing. The outcomes of the phenomenon are various negative organizational responses. Health care is somewhat lagging behind in this shift towards working in teams, but with increasing specialization greater coordination is needed between health care professionals. Above all, the patient wishes to be more involved in the health care process. Research suggests that patient involvement and working in teams have a positive impact on effectiveness and patient mortality, respectively. One of the challenges for health care is to include the patient in the teamwork process as an equal member of the group and at the same time overcome the drawbacks mentioned above, in a setting where a traditional, paternalistic approach is still present and the vulnerability of the patient (and his/her dignity) is evident.
-
Sport, the Remedy of Stress
69-78Views:2413The study examines the relationship between mental health, resilience and perceived stress among leisureand competitive athletes. Three questionnaires (Keyes Mental Health Continuous Scale, Detected Stress Questionnaire, and 10-item CD-RISC Questionnaire) were studied, filled out by a total of 436 people, of which 297 were competitive athletes and 139 leisure athletes. The main question of my research was whether there is a difference between these three variables, and how resilience and perceived stress affect three factors of mental health, athletes in leisure and competition. The results show that for all variables the athletes of the competition achieved a better average value than the leisure athletes, and I could show a significant difference in the mean values in the case of the emotional and social well-being variables. Moreover, perceived stress had a greater impact on emotional well-being, while resilience had a positive effect on psychological and social well-being.
-
Examination of the Physical Activity of Amateur and Hobby E-sport Players
Views:382With the spread of computers and the Internet, e-sports became a fast and dynamic growing sector with a significant market and economic potential. Its importance is demonstrated by the fact that its growth is now outstripping some traditional sports or other industries. E-sports users are sedentary in front of a computer during both competition and training, so their health is determined by the amount of physical activity they do when they are not in front of a computer. The primary aim of this research is to investigate the physical activity of e-sports users at different levels. In addition to this, I considered it important to investigate what games the players I interviewed compete in, how much time they spend playing and how they improve their skills. I conducted an online questionnaire survey in the University Electronic Games (UEG) online tournaments organised by the University of Debrecen. The participants in the survey fully met my criteria, as most of them were amateur or hobby e-sports players, so I obtained relevant data from their answers. Based on the participants' responses, it can generally be said that they engage in health-enhancing physical activity. However, it should be remembered that not only the rise in popularity of e-sports, but also the increasing digitalisation of society is contributing to the rise in sedentary lifestyles. In the future, it would be important to change the way gamers exercise, which until now has been predominantly to develop their digital video game skills. Physical activity and other health-related behaviours need to be integrated into the training routines of gamers - e-sports players, so that playing sports could become a natural pastime alongside e-sports.
-
Impact of Physical Properties of Workpiece Material on Material Removal Rate at EDM
230-237Views:121The volume stock removal from the workpiece during the EDM is one of the important parameters that characterize the productivity of the electro-erosion process itself. Therefore, in terms of the economic efficiency of the electro-erosion process, it is appropriate that the value of the MRR parameter is as high as possible. The paper describes the results of experimental research to identify the extent of influence of the physical properties of the workpiece material on the workpiece material removal rate at EDM. The experiments were carried out using an Aggregron Hyperspark 3 electro-erosion machine on selected tool steels. As a tool electrode material for experimental purposes, graphite with the designation EX-60 was chosen because of its practical advantages.
-
Specialties of First SMED in Pharmaceutical Manufacturing
1-11Views:194Single Minute Exchange of Die (SMED) is considered as an effective lean management method increasingly used in pharmaceutical manufacturing. By reducing change-over times and costs, the successful implementation of the first SMEDs may bring a significant increase in terms of manufacturing flexibility. The purpose of this study is present the special factors that fundamentally determine SMEDs applied especially in the process of pharmaceutical manufacturing. By focusing on a well defined part of the pharmaceutical manufacturing process, lasting from Weighing and Measuring to the end of Tablet Pressing, the study also aims to highlight the benefits of SMED itself. The findings of the research are based on the practical experiences of four SMEDs implemented in various sections of production. According to the experiences and considering industrial specialties, the implementation of SMED has to harmonise with the requirements of Good Manufacturing Practices (GMP) which are representing the golden quality standards of pharmaceutical manufacturing.
-
Automation Capabilities for the Logistics Service of Jobshop Production System
210-221Views:425One of the most important subsystems of manufacturing is the logistics system for transporting materials between technological phase. It is integrated depending on the production structure. The special feature of highly flexible workshop system production is that the material handling system is typically separate and the movement needs occur independently of each other, so the flexibility of the material handling system is required to achieve the expected production goal. In practice, therefore, the organization and execution of material handling is to a considerable extent dependent on the human factor. The purpose of this research is to explore the potential for automation of material handling activities in this particular production environment.
-
Energy-Efficient Buildings, a step towards Sustainability in Pakistan
109-124Views:247With every passing year, energy consumption in the world is increasing drastically. Most of the energy comes from fossil fuels which are also depleting in a fast manner. Buildings consume a significant amount of energy all over the world and the demand for energy is also increasing unremittingly in buildings. Developed countries are taking profound measures in order to make buildings energy efficient and sustainable by achieving nearly zero energy stage. Pakistan is facing a serious energy crisis from the past few decades. The building sector in Pakistan deserves special attention in this regard since the energy consumption in buildings in Pakistan is feverishly high. Many types of research have been carried out in Pakistan by the United Nations and Energy Department of Pakistan in order to devise applicable methods that not only provide thermal comfort to the occupants but also make a building energy efficient. Renewable energy also plays an important role in compensating building energy demands. It is easy to achieve nearly zero energy state in a good energy efficient building if it is coupled with renewable energy sources then it will make it self-sufficient in energy demand. A survey is also carried out to determine the thermal comfort of the occupants in different types of areas. Also, solar energy analysis is also taken into account to highlight the solar power potential in Pakistan. Several recommendations have also been suggested to implement energy efficiency measures in Pakistan.
