Keresés

Keresési eredmények

• Aspects Regarding Fly Control of Quadcopter

  1-5.

  Kuantama Endrowednes

  Tarca Ioan

  Tarca Radu

  Craciun Dan

  Megtekintések száma:

  199

  Quadcopter is one of Unmanned Aerial Vehicle (UAV) which has two pairs of identical fixed pitched rotor propellers. It can fly autonomously based on pre-programmed flight or manually controlled by a remote, and every movement achieved by varying the speed of each rotor independently. The orientation of quadcopter axes relative to a reference line and its direction of motion are known as attitude. Fly control factors are affected by attitude determination which can be calculated from 3 possible angles using combined measurement. Gyroscope and accelerometer are primary sensors to control quadcopter attitude, but magnetometer sensor and GPS also used to enhance the stability during flight. This paper will focus on details of function and mathematical formula of every factor regarding fly control and comparative data of 2 types of orientation sensor used in this system.

• Development of a Parking Assistance for Model Vehicle

  1-4.

  Cservenák Ákos

  Megtekintések száma:

  115

  A model vehicle has been developed further in order to perform automatic parking. Ultrasonic sensors and STM32 F4 Discovery microcontroller have been mounted. The driving assistant system can find the parking place then parallel parking is performed. The backward motion of the vehicle is carried out along two circular paths, which is followed by corrections of the position and orientation.

• Navigation of Differential Drive Mobile Robot on Predefined, Software Designed Path

  1-5.

  Papp Áron

  Szilassy László

  Sárosi József

  Megtekintések száma:

  162

  This paper will be presenting the process of mobile robot movement controlling, from the task of collecting sensor data until the problem of controlling data to the servo motor controllers. In details, the first part will show the mechanism of converting CAD data to routes, and the processing of the navigation data read from the sensors and calculated from former controlling commands. The second part will explain the processing of navigation data, the applying of the actual robot position and orientation on the predefined virtual path and the production of the controller's input variables. The Fuzzy controller and the rule base will be introduced in the third part.