Search
Search Results
-
Maize stem diameter variation under precision drip irrigation and foliar micronutrient treatments
87-92Views:91Foliar application of micronutrients has gained research interest due to the growing need to efficiently and precisely deliver plant nutrients at the most critical growth stages. Stem diameter has proved to have a positive significant correlation with yield across many crop species such as maize, due to its vigorous and robust ability to transport water and micronutrients. Therefore, this study examined the effects of precision drip irrigation and foliar application of micronutrients on stem diameter of FAO490 maize hybrid. A field experiment laid as a split–split-plot design with treatments consisting of foliar treatment and control under irrigation and non-irrigation was conducted. Stem diameter data were collected at the 12-leaf stage (V12), tasseling stage, R1, and R6. ANOVA results showed that precision drip irrigation significantly influenced stem diameter (P<0.001), while foliar fertilisation and its interaction with precision drip irrigation showed meaningful effects. The mean stem diameter under precision drip irrigation was 26.96 mm compared to non-irrigated conditions (24.24 mm). Foliar fertilisation treatment had a higher mean stem diameter (26.63 mm) compared to control (24.57 mm), representing an 8.4% growth difference. Foliar fertilisation was more effective under precision drip irrigation with the mean stem diameter significantly high (28.83 mm) for treatment over the control (25.08 mm) thus a 14.9% stem diameter enhancement. Foliar fertilisation under non-irrigated conditions recorded a 1.6% stem diameter increase between treatment (24.43 mm) and control (24.05 mm). This study indicates that precision drip irrigation primarily influenced stem diameter growth and development, however foliar fertilisation further enhanced stem growth under adequate water supplementation, suggesting a positive significant synergistic effect under precision drip irrigated conditions.
-
Comparison of growth parameters of 40 varieties/clones short rotation coppice willow (Salix)
99-104Views:264The plantation of willow varieties was established in 2009. The 40 different varieties and clones of Salix were planted at a research field in Kolíňany (Nitra district). The paper evaluates results from the first growing season in 2009. The survival rate of planted cuttings ranged from 55.56 % to 100.00 % after the first year. The lowest survival rate was reached by Terra Nova variety. The stem numbers per plant ranged from 1.17 ±0.37 to 2.53 ±0.98. The average height of one-year old stem varied from 65.82 ±36.60 cm to 225.58 ±68.61 cm. The average stem diameter ranged from 6.90 ±2.63 mm to 14.34 ±3.39 mm. There were statistically very significant differences in parameters of stem height stem diameter and stem numbers per plant among studied varieties/clones. The statistic method used was analysis of variance ANOVA. The varieties were then divided into 6 groups according to their similarity in observed parameters after the first growing season by cluster analysis. The best results were reached by varieties/clones classified in the second group. The survival rate, stem diameter and stem height values of these varieties/clones were above average.
-
Studying the effects of traits in the genotype of three maize hybrids in Hungary
97-101Views:972In this study, we selected three hybrids (Armagnac, Loupiac, and Sushi) for evaluation of the effect of traits in genotype in Debrecen. In 2017, the total rainfall from May to October was 314 mm in Debrecen, which was 236 mm in the winter period before sowing. The obtained results showed that there was a positive correlation between the weight of the cob maize and the rate of seed/cob, number of rows with number of seeds in column and outer diameter ear with weight of cob and number of rows in grain per ear and the rate of seed / cob; Also, there was a negative correlation between grain weight in ear with seed/cob rate, outer diameter ear and the rate of seed/cob and outer diameter ear with the number of leaves. There was a positive correlation between stem diameter, Seed/cob rate and the number of nodes by GGE biplot. In addition, there are traits of weight of all seeds and outer ear diameter that had the highest effect on average yield. Moreover, the number of seeds per row showed the least effect on the average yield of hybrids.
-
Study of drought stress correlation on yield and yield components of maize cultivars (Zea mays L.)
67-73Views:764This article was investigated to study the correlation and analysis of drought stress regression on maize cultivars' yield and components. The variance analysis results showed a significant difference between drought stress levels in terms of plant height, total dry weight and number of seeds per row, the total weight of cob, grain yield, harvest index, stem diameter, and cob weight with protective leave. Also, there was a significant difference in ear weight without protective leaves, ear diameter, ear length, plant weight, 100-seed weight, and seed per ear on hybrid treatments. There were statistically significant differences between cultivars in plant height, leaf area, ear diameter, ear length, number of seeds per row, number of seeds per ear, the total weight of cob wood, 100-seed weight, harvest index, plant dry weight. The results of the correlation of traits for the mean levels of drought stress showed a positive and significant correlation between plant yield and plant height, seed per row, ear length and weight of 5 pieces of wood and also with a total weight of cob wood, ear weight with bark showed the highest correlation. There is a significant correlation between leaf area and stem diameter, plant weight, total dry weight at the probability level of 0.05. Correlation coefficients between traits in non-stress conditions showed a positive and significant correlation between grain yield and height, ear length and grain in the row, which was a significant increase compared to stress conditions. The correlation of traits under full stress conditions also showed that the correlation coefficient between cob length trait and positive height was positive and significant. From the study of correlation coefficients between maize traits in non-stress conditions, it can be concluded that the most important components of grain yield are cob length and grain per row. While the correlation coefficients under moisture stress conditions show that the grain trait in the row has a positive and significant correlation with yield, under stress conditions in the cob stage did not show any traits with correlation yield.
-
Assessing of soil aggregate stability: the sand-correction and its relevance
29-47Views:237Soil structure and changes in its quality caused by Maize stem (1), Wheat straw (2) and Maize stem & wheat straw (3) addition were assessed by three aggregate-stability indices. We observed that the NSI index formula proposed by Six et al. (2000) was nonsensitive to the changes in soil structure caused by the investigated organic matter addition. Furthermore it overestimates the aggregate-stability of the investigated silty sandy loam soil. Therefore we proposed a new modified NSI formula which is sensitive to the questionable treatments and that resulted in a more
realistic NSI data. The most sensitive index to differences of the investigated treatments were the Mean weight diameter (MWD) proposed by van Bavel (1953, in Kemper és Rosneau, 1986). -
Fruit quality of sweet cherry cultivars in superintensive orchards
75-81Views:897The fruit quality of 15 sweet cherry cultivars (’Canada Giant’, ’Celeste’, ’Chelan’, ’Ferrovia’, ’Germersdorfi Rigle’, ’Katalin’, ’Karina’, ’Kordia’, ’Linda’, ’Regina’, ’Sam’, ’Sandra Rose’, ’Sunburst’, ’Sylvia’ and ’Techlovan’) was studied under super-intensive growing conditions at Nagykutas. We measured the fruit diameter, fruit width, fruit height, stem length and stem weight, fruit and pit weight and the total dry matter content. There were large differences among the cultivars. These differences are due to the genetic characteristics of fruits because all other conditions were the same. For 11 cultivars, we collected fruit samples several times /2-4/. We examined on this cultivars all the above listed fruit quality parameters. When examining these samples, we have gained information how earlier or later than optimal harvest time influences fruit quality.
-
Sweet cherry fruit quality by half-intensive orchard management
76-79Views:332We made our study on fruit quality in the summer of 2005 on 6 cultivars („Bigarreau Burlat”, „Germersdorfi 3”, „Germersdorfi 45”, „Katalin”, „Linda” and „Van”) in a half-intensive sweet cherry orchard in Siófok. We measured fruit diameter, fruit width, fruit height, stem length and stem weight, fruit and pit weight and total soluble solids content. There were large differences among cultivars in the datas. These differences are due to genetic fruit-characteristics, because all other conditions were the same. We harvested fruits by 3 cultivars two times to check their characteristics on two ripening phases. We examined on these cultivars all the above listed fruit quality parameters. With these data we can be informed about the role of later than optimal harvesting time and how big an effect it has on fruit quality.
-
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:577In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
Tending operation model for red oak stands
133-136Views:411Red oak (Quercus rubra L.) is our most important exotic oak species, that possesses growing culture with almost one hundred years in our country. Plantation character of red oak growing predominates principally by applied regeneration method (mostly artificial), regular planting space, applying defined method and planting space regulation system. Forest tending model for red oak, that considered stopgap in the native literature is intended to serving the latter. Especially important equation in the viewpoint of stand growing, that describes relationship of stem number (N, in hectare) and diameter at breast height (D1.3 in cm) is: N=e9.80220-1.12607lnD1.3.
-
The effect of Willow extract, Bistep and their combination on some quality parameters of lettuce (Lactuca sativa L.)
239-247Views:420The research described in this paper was conducted at the University of Debrecen, Farm and Regional Research Institute in its Botanical and Exhibition Garden, Hungary. The aim was to investigate the influence of plant biostimulants on the morphological parameters of three lettuce varieties (May King, Kobak and Great Lakes). Willow bark extract and Bistep were used through irrigation and spray onto the plant leaves with the amount of 5% Willow and 0,5% Bistep. Vegetative parameters like head structure (1….10), head weight (g head-1), head closing (1….10), number of leaves, head diameter (cm), internal stem size (cm) and root weight (g head-1) were measured in 2019 and 2020. According to our results, vegetative parameters are significantly affected by plant varieties and treatments. In the experiment of 2019, important vegetative parameters were influenced by the Willow extract, while in the season of 2020 the most influenced parameters were under the impact of Bistep biostimulants followed by Willow+Bistep. However, the most favourable vegetative growth was recorded in the Kobak variety in the season of 2019 followed by May King and Great Lakes varieties in the season of 2020. On the other hand, the interaction effect of plant varieties and plant biostimulants on the vegetative parameters were varied from seasons. For example, for the season 2019, significantly the highest vegetative value was recorded for the interaction of May King variety treated with Willow extract, whereas in 2020, significantly the most influenced vegetative parameters were under the influence of the interaction of Bistep and May King variety followed by the interaction of Willow+Bistep and Kobak variety.
-
Effects of plant density on photosynthetic characteristics and yield of maize under irrigation condition
115-118Views:497Maize plant response to plant density is an essential agrotechnical factor used for determining grain yield. Three plant densities (60,000 ha-1, 72,500 ha-1, and 85,000 ha-1) were used in this study to ascertain the effect of photosynthetic parameters and grain yield. Results show a significant difference in the photosynthetic parameters (SPAD, NDVI, LAI) and plant height for plant density of 85,000 ha-1. Grain yield and stem diameter were not significantly affected between the different plant densities.