Search
Search Results
-
Analysis of small ruminants’ semen under the cooling, deep-freezing and sex-orientation method
53-58Views:127The aim of this study was to examine the influence of cooling, deep-freezing and sex-orientation methods on fertility of ram and buck semen. It was pointed out that deep-freezing and sexorientation methods had a more considerable destruction on both semen compared with the effect of cooling method. However, with the development of the sex-orientation method, the results of lambing had a significant increase in sheep. On the other hand, the NRR of the inseminations with deep-frozen ram semen exceeded most of previously publicated results. Being interesting, and hopefully useful benefit in practice that the analysed buck semen samples are shown more favourable results in all methods compared with the same results of rams.
-
Delay of flowering in orchards
79-81Views:86The goal of my research was to find out how cooling sprays affect the onset of flowering and the microclimate int he fruit orchards.
Frequent spraying (every 20 minutes) can keep the temperature of trees and buds lower.As a result the onset of flowering occured several
days later in the sprayed trees. It was proven that cooling sprays are suitable for delaying the onset of flowering under the domestic climatic conditions. This procedure can significantly mitigate the risk of frost damage and can improve crop safety. -
Impact of environmental changes resulting from different sowing dates on maize yield
99-104Views:132Three Debrecen maize hybrids of different genotypes (Debreceni 285, Debreceni 377 and Debreceni 382) were examined on chernozem soil in a field experiment. During the two years of the experiment (2009–2010), we wanted to get to know how the examined hybrids reach to different sowing dates and what impact early, optimal and late sowing has on yield.
In 2009, balanced soil and air temperature resulted in steady emergence. However, the low temperature in early April and the cooling down in mid-May 2010 caused a delayed emergence.
The grain moisture content at harvesting and the high yield showed a strong crop year effect. In 2010, yield was much lower (1.664 t ha-1) and grain moisture was significantly higher (34%)than in 2009.
In 2009, early sowing resulted in yield decrease (P<0.05), but it also significantly reduced grain moisture at harvesting (P<0.05). Although late sowing slightly increased yield (not significantly), but grain moisture at harvesting increased by 9.2%. In 2010, optimal sowing date was shown to be the best alternative from the aspect of yield, but there was no significant difference in comparison with early and late sowing. Grain moisture at harvesting greatly increased (13.3%).
The Debreceni 382 maize hybrid reacted to sowing dates flexibly, neither early, nor late sowing affected its yield significantly and the grain moisture at harvesting showed 12% increase in the case of the late sowing date. In 2009, maize hybrids Debreceni 285 and Debreceni 377 reached their highest yield in the case of the sowing date which was shown to be optimal (23rd April), while the different sowing dates had no effect on yield in 2010.
-
Decreasing Energy and Water Use in the Meat Industry
24-28Views:61The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.
-
Competitiveness of the biomethane opposite with the CHP technology of biogas by definite plant size
5-9Views:118The biogas sector has never before aroused so much attention as it does today. Combined heat and power (CHP) reliable and cost-effective technologies that are already making an important contribution to meeting global heat and electricity demand. Due to enhanced energy supply efficiency and utilisation of waste heat renewable energy resources, CHP, particularly together with district heating and cooling (DHC), is an important part of national and regional Green House Gas (GHG) emission reduction strategies.
During my work I am going to use the basic data of a certain biogas plant than I assemble one model from that. Against the CHP technology I am going to plan a biogas cleaning-equipment. During my research it revealed, that in the case of a 1 MW output power plant it is not worthy to deal with biogas cleaning between national conditions. Investigating the quantity of heat recovery in the CHP technology it is obvious, that the net income at 1 m3 biogas is at least 72 times more than the cleaning technology (heat recovery is 0%).
-
Stress Response of four Common Carp (Cyprinus carpio L.) Varieties with Different Genetic Background
26-29Views:68Four different carp varieties were tested for stress reaction, with the help of 10 °C cooling and 100 g/l crowding. The selected varieties represented a broad genetic spectrum of carp species. The stress was monitored by measuring plasma cortisol, glucose and lysozim levels. In each test different varieties showed significantly different reaction to stress. This means that they differ in the trait of general resistance. Thus, this trait can be used in selection programmes and the acquired information helps to understand fish-environment interaction and specific resistance. These traits should be used in selection to improve the breeding of new more tolerant species for intensive farming or for organic production.
-
Data supporting the quality of sheep milk for processing
67-73Views:82Although the volume of ingredients in ewe’s milk is substantially higher than in cow’s milk, its hygienic quality is lower. The weak quality of raw ewe’s milk limits the possibilities of processing and results in bad quality products. In our investigation we analysed the state of ewe’s milk processing at a typical medium size dairy firm. We investigated the collection, the amount and the quality of milk and the level of ingredients in milk throughout the purchasing period (lactation period).
The purchasing of ewe’s milk was limited to 5 months (from April to September). Although meat (lamb) provides the major source of income to sheep breeders the extension of the period of ewe’s milk production can be beneficial to shepherds and dairy firms. The amount of ewe’s milk ingredients found corresponded to published findings. However, the hygienic quality of ewe’s milk was varied greatly in the different milk samples and these deviations meant bad quality on average. Physiological factors, the circumstances of sheep breeding and milking, the slow cooling of the milk, the little amount of daily milk and the long storage before transportation to the dairy firm together cause poor hygienic quality. The main problem is the long storage time of milk, but our results raise the question of reconsidering the quality classes. Investigating the effect of the hygienic quality of raw milk on product quality, we can get correct data that can be really authoritative. -
Agricultural aspects in river basin management plans
149-152Views:89In the European Region agriculture is the second largest water user after power industry cooling water use. As part of the implementation of Water Framework Directive EU Member States prepared their river basin management plans by the end of 2009 or first half of 2010, In these plans impacts of agriculture on water bodies have received attention. The detailed information elaborated in the plans by countries and river basin districts were uploaded into the WFD section of the WISE system. This database provides opportunity for multi-criteria analysis for different water types. The paper discusses the effects of agriculture on hydromorphological pressures and impacts affecting surface water bodies. It was pointed out that among the pressures affecting European surface water bodies the hydromorphological and diffuse pressures represent the highest ratios (Figure 1). Within the hydromorphological pressures affecting classified surface water bodies the ratio of pressures related to agricultural activities is low,
it does not exceed 1% at European level. In case of Hungary the agriculture related river management pressures effect about 80% of the surface water bodies, which is much higher than the corresponding European average. The agricultural water abstractions affect about 10% of the Hungarian surface water bodies (Figures 2 and 3). The river and lake water bodies are impacted in significant ratio by nutrient enrichments and organic material enrichments, while in case of river water bodies the impact of organic material enrichments is also significant (Figures 4 and 5). -
The recent state of cryopreservation techniques for ex-situ gene conservation and breeding purposes in small ruminants: A review
81-87Views:267The viewpoint of the recent cryopreservation techniques (CT) suggests the use of a reduced volume of cryopreservation solution, high concentration of cryoprotectants and ultra-rapid cooling and warming rates help to reduce cryo-injury and maximize the viability of the preserved animal genetic resources (AnGR). The CT had now become widely accepted as one of the best methods of choice for the ex-situ conservation of AnGR due to its high success rate recorded and no-invasive nature as compared to the conventional slow rate freezing (CSRF). Rapid advances and wide acceptability of the use of assisted reproductive technologies (ART’s) particularly artificial insemination (AI) in animal breeding had resulted in a greater loss of a large number of good quality genes in virtually almost all the native breeds of animals across the globe. Small ruminant (SR) animals are not an exception in such present predicaments situation of erosion and dilution of the valuable AnGR among the native breeds. As a result of this, 148 and 16 breeds of sheep and goats respectively have already become extinct in Europe and the Caucasus. In view of the aforementioned situation, the present review aimed at exploring some of the current states of development, roles played and potentials of CT in the conservation of SR genes and genome for the immediate and future breeding purposes for sustainable development. It basically covers; animal genetic resource, the need to conserve AnGR, tools for ex situ in vitro conservation of AnGR and recent developments in breeding and cryopreservation of SR AnGR.
Cryopreservation is playing a pivotal role in ex-situ gene conservation of AnGR. Decline in genetic diversity among SR breed population was high in Europe and the Caucasus. There is therefore, need for improvent on current stringent measures on conservation of AnGR in this region of the world.
-
Alternatives of microclimate control in orchards
209-212Views:119The aim of the study was to find out which of the methods used to avoid damages of late frosts would be the most effective for the fruit growing practice. We tested the antifrost irrigation method in Debrecen-Pallag. For that purpose microjet sprayers are used, which are thrifty and does not need for that purpose large containers. With the aim to secure an even distribution of water, the sprayers are distributed on three levels: above and inside of the crown as well as on the level of trunks. On a large scale, a single microjet above the crown level would be sufficient. By means of a detailed analysis served to set the optimum intervals between spraying phases: with each 15, 10, 5 and 3 minutes during half a minute. The synchronous presence of water and ice below the freezing point, the released freezing heat plus the water used much above the freezing point
(9–10 °C) altogether maintains the temperature above around 0 °C near the flowers or growing fruitlets, meanwhile, the surrounding air cools down to -8 °C. The effectiveness of the generally used antifrost would be increased substantially by the former application of cooling irrigation, which delays the blooming date. -
Agricultural relations of the increasing carbon dioxide emissions
197-201Views:182Emissions of carbon dioxide (CO2) have deserved more and more attention of humanity since decades, but inspite of theme asures already taken there are no substantial results. CO2 is a very important chemical, one of the greenhouse gases, which on the one hand offsets the cooling of the Earth, but on the other hand the too high CO2 emission leads to the global warming. The emission from the soil contributes substantially to the global cycle. This type of emission is influenced by the soil moisture, temperature, the soil quality and the cultivation. Through our measurements we have studied the relationships between the type of cultivation and the emissions of carbon dioxide.
-
The effect of keeping technology on the microbiological status of raw milk
67-75Views:100The importance of the quality of raw milk increased after Hungary had joined to the EU. On delivery of raw milk, the microbiological quality, especially total plate count of the milk is very important. Twenty-two farms (7 large, 4 medium-sized, and 11 small farms) were included in the study. We considered the different farm size, keeping- and milking circumstances during the selection of farms. The examined large farms use loose housing system (cubicle, deep litter) and milking parlour. Most of them use preand post-milking disinfection. In the medium-sized farms, loose,
deep litter and tie-stall housing system, as well as milking parlour, pipeline milking and bucket milking occurred. All of them use preand post-milking disinfection. Small farms use tie-stall housing system, bucket milking and udder preparation by water. Unfortunately, they do not use pre- or post-milking disinfection. In the large and medium-sized farms mainly Holstein Friesian, in the small farms Hungarian Simmental breeds can be found.
The aim of our research was to examine the microbiological status of the raw milk produced in dairy farms (total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, psychrotroph bacteria count, furthermore yeast and mold count); sources of the contamination; connection between the microbiological quality of produced milk and housing-, milking technologies of farms; furthermore the hygienic circumstances of milking and milk handling of the farms, by the examination of coliform bacteria and Escherichia coli contamination.
During the examination of the connection between the different farm sizes, various housing- and milking forms and the microbiological characteristics we observed similar tendencies in the case of total plate count, coliform count, yeast and molds count, furthermore psychrotroph bacteria count. The value of these parameters was significantly higher in small farms, and infarms which use tie-stall housing forms, bucket milking, udder preparation with water, and which do not use pre- and post-milking disinfection.
The results showed that besides cooling, the milking procedure and the type of udder preparation had the largest effect on the total plate count. Statistical analysis shows that in medium and small farms the combination of pipeline milking – tie stall housing system – disinfectant preparation of the udder; in large farms the combination of milking parlour – loose cubicle housing system – dry preparation of the udder are the most appropriate in the aspect of the total plate count. We experienced that in farms where the hygienic instructions are not followed – and therefore
equipment used during the milking and handling of milk is very contaminated – or rather the separation of mastitic cows’ milk is not appropriate, different microorganisms may contaminate the produced milk.