Search

Published After
Published Before

Search Results

  • The impact of climatic factors on the relative chlorophyll content and yield of a maize hybrid in a long-term experiment
    71-77
    Views:
    234

    The impact of the climatic factors of crop year on the relative chlorophyll content of maize was examined for three years. The examinations were carried out on the Látókép Experiment Site of the University of Debrecen on calcareous chernozem soil in a small-plot, non-irrigated long-term field experiment with strip plot design. In addition to a non-fertilised (control) treatment, nitrogen (N) fertiliser doses were applied as base and top dressing. The 60 and 120 kg N ha-1 base dressing doses were followed by two top dressing doses at the V6 and V12 phenophases.

    Averaged over the different fertiliser treatments, SPAD readings increased in all three years as the growing season progressed. The highes SPAD value increase was observed in the average crop year (2017) at the V12 phenophase (11.8), which further increased at the R1 phenophas, by 3,7. No significant Spad value difference was observed between the average (2017) and the dry year (2018) at the V6 growth phase. However, in the wet crop year (2016), the V690 treatment provided the statistically highest relative chlorophyll content (46.8). At the V12 phenophase, the base dressing dose of 120 kg N ha-1+30 kg N ha-1 (V6150) showed to be successful in two years (2016 and 2018), while in 2017, the base dressing dose of A60 was successful. The impact of crop year on relative chlorophyll content can be clearly shown at the R1 growth stage. In all three years, the significantly highest relative chlorophyll content could be achieved at different nutrient levels: A60 in 2016, V6150 in 2017 and V690.

    In a wet year (2016), higher yield could be achieved as a result of the 60 kg N ha-1 base dressing and 30 kg N ha-1 at the V6 growth stage (V690) as top dressing in comparison with 2017 and 2018, when higher fertiliser dose (120 kg N ha-1 base dressing and 30 kg N ha-1top dressing at the V6 growth stage) was needed to achieve a significant yield surplus.

    Altogether, averaged over the different treatments, the highest yield (12.48 t ha-1) was observed in the wet year, when the relative chlorophyll content was also the highest (50.6).

  • Effect of Irrigation on the Yield and Quantity of Potato Varieties
    53-61
    Views:
    133

    In Hungary, the growing area of potato area dropped dramatically in the last few decades. Additionally not only are we lagging behind Western European countries as regards yields, but the competitiveness of production is further decreased by the great alternation in yields from year to year, unpredictable market conditions, poor consumption habits and, often the lack of quality products.
    The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment, we examined the yield and some quality parameters of 9 medium-early varieties in large parcels. Of the examined varieties, 3 are of Dutch, and 6 are of Hungarian breeding.
    The experiment was set up in 2003 and 2004, in two years of significantly different precipitation, on 50 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, from which two repetitions were irrigated, and two were non-irrigated.
    We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the underwater mass, the amount of reducing sugars, and the colour index of frying of the tubers.
    In Summary, it can be stated that among the agrotechniques, year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. However the effect of irrigation depends on the crop year. In a draughty year, like in 2003, irrigation could increase the yield by 10%, while in a more favourable wet year, the improving effect of irrigation was low.

  • The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
    95-104
    Views:
    97

    The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
    The soil of the experimental plots was meadow soil.
    Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
    Results of the sowing time experiment:
    In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
    Results of the plant density experiment:
    We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
    Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years.

  • Effect of season and sowing time on the moisture loss dynamics and yield of maize
    255-265
    Views:
    213

    The effect of sowing date on maize development and yield was studied in field experiments. The experiment was set up at the experimental garden of the University of Debrecen Centre of Agricultural Sciences Faculty of Agriculture, Department of Plant Sciences in 2005 and 2006 on calcareous chernozem soil. Six hybrids with different genetic characteristics and vegetation period were tested (Sze 269, DK 440, PR37D25, NK Cisko, Mv Maraton, PR34B97) at three different sowing dates.
    2005 was a very wet year. The amount of precipitation in the vegetation period was about 150 mm higher than the average of 30 years. No significant differences were observed in temperature. However, the number of sunny hours was much lower during the summer than as usual. This had an influence on yields.
    In 2006, there was no risk of inland water in spite of the large amount of precipitation at the beginning of the year. The amount of water available for plants was satisfactory during the season due to the favorable amount of precipitation. Therefore, plants suffered less from the heat in July. However, hail on 22 July caused significant damage. The number of sunny hours in the summer was high enough. The warm, dry autumn helped the water release of plants.
    In 2005, the results of the third sowing date could not be evaluated due to the large number of missing plants. The yield of hybrids ranged between 12-14 t/ha for the first sowing date. For the second sowing date, yields ranged between wider boundaries. The hybrid PR37D25 has a very high yield in the case of the second sowing date, and its seed moisture content was favorably low. The yield of hybrid PR34B97 was the lowest at the later sowing date, the prime reason of this was damage caused by Diabrotica virgifera. The seed moisture content at harvest varied between 16-24% for the first sowing date. In the case of the second sowing date, higher values were measured. Hybrids Sze 269 and NK Cisko had favorable water release characteristics. The maximum value of leaf area index was the best in the case of the first sowing date (5-5.5 m2/m2).
    In 2006, yields for the first sowing date ranged between 8-10 t/ha. At the second sowing date, more favorable results were obtained. The reason for this is probably that hail caused a higher damage in hybrids with the early sowing date. Plant stock with later sowing date could recover more successfully. Hybrid PR37D25 had very high yields for the second and third sowing dates. The high-yielding hybrid PR34B97 also had high yield, but this was accompanied by higher seed moisture content. Due to the warm, sunny autumn weather, the hybrids had good water-release dynamics and were harvested with a lower seed moisture content than in the previous year. For the first sowing date, the seed moisture content was around 13-14% except for hybrid PR34B97. For the second and third sowing dates, higher values were observed. Leaf area index was significantly reduced in August for all three hybrids due to the hail in July. For the first two sowing dates, the leaves of hybrid Sze 269 were the first to dry similarly to the previous year.
    Year had a strong effect on the results in both years.

  • Effect of year and irrigation on yield and quantity of different potato varieties
    7-14
    Views:
    121

    dramatically in the last few decades. We are lagging behind Western European countries as regards yields. The ecological conditions are not favourable for potato, but the low yields other causes: the use of non-suitable seed, the low level of irrigation and nutrient supply and out of date machinery. The competitiveness of production is further decreased by the great alternation in yields from year to year, unpredictable market conditions, poor consumption habit, and often the lack of quality products.
    The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment, we examined the yield and selected quality parameters of 9 medium-early varieties in large parcels. Of the examined varieties, 3 are of Dutch, and 6 are of Hungarian breeding.
    The experiment was set up in 2004 and 2005, on 50 m2 parcels on calcareous chernozem soil after winter wheat (2004) and two rowed barley (2005) as a forecrop. The varieties were examined in 4 repetitions in randomized blocks, of which two repetitions were irrigated, and two were non-irrigated. We examined the yields of the varieties, the distribution of tubers according to size and their percentages and changes, and selected parameters of quality and chemical composition due to irrigation. We studied the dry matter content, the starch content, the underwater mass, the amount of reducing sugars, and the colour index of frying of the tubers.
    Summary, it can be stated that among the agrotechniques, year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. However, the impact of irrigation depends on the year effect.

  • Site and hybrid-specific agrotechnical models in sweet corn production
    105-108
    Views:
    105

    The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
    In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem  soils.

  • The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
    143-147
    Views:
    186

    In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.

    Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.

    The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.

    In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.

    The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.

    However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.

    As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.

  • The effects of drought stress on soybean (Glycine max (L.) Merr.) growth, physiology and quality – Review
    19-24
    Views:
    217

    Abiotic stresses are one of the most limiting factors inhibit plant's growth, leading to a serious production loss. Drought stress is one of the most destructive abiotic stresses and is still increasing year after year resulting in serious yield losses in many regions of the world,
    consequently, affecting world’s food security for the increasing world population. Soybean is an important grain legume. It is one of the five major crops in the world, an essential source of oil, protein, macronutrients and minerals, and it is known as the main source of plant oil and protein. Harvested area of soybean is increasing globally year after year. However, soybean is the highest drought stress sensitive crop, the water deficit influences the physiology, production and seed composition of this crop. We introduce a review for literatures concerning the changes of the above traits of soybean exposed to drought stress, with past explanations for these changes.

  • Effect of the Cropping Year on the Quality of Winter Wheat
    89-95
    Views:
    162

    We examined the formation of quality parameters of winter wheat in a small plot variety comparison experiment from four cropping years. Our aim was to estimate the year effect on several quality parameters of winter wheat.
    We established in relation to the distribution of precipitation of the examined years that the years 1997 and 2000 were behind the thirty year average typical precipitation of this site both in the case of the whole vegetation period and the spring and summer. It was unfavourable for qualitative wheat production. 1998 and 1999 were good for cropping considering the amount and distribution of rainfall.
    Examining the formation of quality parameters we found that the baking value was maximum in 1997, with a moderate amount of normal distributed rainfall for the examined varieties. The mid-late maturating varieties showed better baking value in drought years than in wet years. In the case of the wet gluten content, we established higher values after a rainier spring-summer period. There is a conspicuous difference between the falling number of extensive and intensive varieties and the year had significant effect on the formation of values. We established with correlation analysis that both the precipitation of vegetation period and the maturing rainfall had considerable effect on the value of falling number. Examining the effect of fertilization on the formation of wet gluten content as a quadratic equation, we found that precipitation may both increase and maximalize the value of this quality parameter.

  • The parameters of homemade jams after storage
    39-42
    Views:
    172

    Nowadays producing jams is considered a traditional way of plum processing in Hungary. Plum jams without added sugar can be stored

    This research aimed to analytically determine which quality parameters of the jams and to what extent they change during storage. Furthermore, this study intended to find out whether a concious consumer can presume any difference between varieties or the year of harvest, or wheather a one-time customer should suspect differences in quality parameters of the different products. This study focused on those differences or alterations in the parameters that occur in the jams made from several different plum varieties produced in different years.

    I analyzed the classic chemical parameters (dry matter content and ash content) and physiologically important nutritional components (phenolic and flavonoids antioxidants and vitamin C). In this research I used jams which were produced from 6 varieties grown in 2009 (President, Tophit, Bluefre, Elena, Presenta, Stanley), 4 varieties from 2010 (President, Bluefre, Elena, Presenta) and 6 varieties from 2011 (President, Tophit, Bluefre, Elena, Presenta, Stanley). Jams were produced with traditional technology in cauldrons without added sugar. Jars were placed into a relatively dark and cool place and were stored there until the analysis.

    Having regard to the results, when consumers choose between the different products they also choose quality since the processed plum variety, and the year of production/processing determine the nutritional value of the specific product. This could be used for market positioning and promotion of the product, however further research is needed to gain more information from the differences that derive from the varieties, year of harvest or other factors. This way fruit and jam producers could turn these informations into market advantage.

  • Evaluation of the yield and baking quality of winter wheat (Triticum aestivum L.) varieties in different cropyears
    95-100
    Views:
    119

    We have investigated the effect of the cropyear, the genotype, the nutrient supply and their interactions on the yield and the quality parameters of three different winter wheat genotypes in three different cropyears. The most disadvantageous influence on the yield averages was caused by the moist weather of 2010, when yield results fell behind the mean of the two other examined years and the nutrient optimum was around low doses. The optimal cropyear turned out to be the ordinary 2011, the best yield results were experienced during this cropyear. Although the drier periods in 2012 decreased the yield values, the varieties could realize high yield maximum values. Considering the yield results, Genius turned out to be the best variety. In respect of the quality traits, 2010 turned out to be the best cropyear in case of all the three varieties. Despite the dry weather of the spring of 2012, the precipitation fell during flowering and ripening phases had positive impact on the grain-filling processes and contributed to the development of better quality. As a consequence of the significantly lower amount of precipitation during the generative phenological phases, the worst quality parameters were realized by the varieties in 2011.

     

    In respect of crop year effect, 2010 was unfavourable for the amount of yield, but the most beneficial for the quality. 2011 was the most advantageous for the yield amounts but disadvantageous for the quality parameters. Although in 2012 extreme crop year effects were experienced after each other (dry and warm spring, moist and warm summer), the yield average and quality trait values were close to the yield averages of 2011 and quality parameters of 2010. Analyzing our results we can state that the average crop year was favourable rather for the yield. The appropriate amount of precipitation during the whole 2010 and that during the generative phenophases in 2012 favoured the development of good quality.

    Consequently, the appropriate amount of precipitation is essential for the development of good quality during the grain-filling period. The negative crop year effects were only compensated but not eliminated by the good nutrient supply. Genius achieved excellent yield averages but performed worse quality parameters than Mv Toldi, whose quality parameters were outstanding but the yield averages fell slightly behind those of Genius. Considering the yield results, the variety Genius turned out to be the best, while Mv Toldi was the best in quality.

  • Effects of Cropping Year and Artificial Fertilization on Alveographic Quality of GK Öthalom Winter Wheat Variety
    126-133
    Views:
    114

    Qualification of winter wheat became more complex for Hungary, after the expansion of the EU. Use of Chopin alveograph is a general method in Western- and Southern Europe. This method is not traditional in Hungary, so determination of alveographic properties of Hungarian winter wheat varieties is very important. Artificial fertilization is one very important component of applied agricultural engineering, which effects winter wheat quality. The another factor is the weather or rather the cropping year, which effects winter wheat quality too. We examined both of them and the alveographic quality of GK Öthalom winter wheat variety between 1996 and 2003.
    We found that cropping year has significant effect on the alveographic quality of GK Öthalom winter wheat variety on each treatment of artificial fertilization. We found no connection between quantities of precipitations of vegetation periods and the W values of GK Öthalom.
    We found a strong connection in 1999 and 2003 as well as a very strong connection in 1996, 1997 and 2002, between the increase of fertilizer dose and W values of GK Öthalom. Treatments of artificial fertilization had a significant effect to W values of GK Öthalom in 2001 and 2002. The differences between the two methods are because of large standard deviation of the results.

  • The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
    39-49
    Views:
    122

    Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
    The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
    In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
    In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.

  • Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
    31-41
    Views:
    221

    The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.

  • The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
    12-16
    Views:
    135

    In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
    The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
    The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
    The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
    We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
    Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety.

  • Nutritive value of Timothy (Phleum pratense L.) during primary growth in 2005
    61-67
    Views:
    141

    In this paper we analysed the change of the chemical composition and nutritive value of Timothy observed during the spring of 2005. The nutritive value of Timothy was observed between the end of April and the beginning of June relating to the following parameters: crude protein, crude fibre, crude fat, ash, N-free extract, net-energy growth, net-energy lactation, net-energy maintenance, Metabolizable Protein Energy dependent, Metabolizable Protein N-dependent. We also analysed whether a relationship between the environmental factors that affect the
    growing period of grasses and the chemical composition can be detected or not. While testing for correlation, the number of days from 1st January, the amount of heat accumulation, solar radiation and rainfall were considered as independent coefficients.
    For the estimation of weather conditions we calculated the climate index. The observed year can be described as a year with a rainfall above the average and abundant solar radiation. A correlation can be detected between the change of parameters of nutritive value and the quality of the current year. In 2005 the result of the analysis of nutritive value was showed a significance difference with respect to each chemical composition at the rate of P<0.001 depending on the time when the samples were taken.
    According to the outlined data it can be stated that the change of the value of crude protein and ash show decreasing tendency agreeing the research literature. In parallel with the change of nutritive value, the amount of crude fibre and N-free extract increased. However, the value of Net-Energy maintenance showed an alteration only in the first half of the observed period. The same alteration tendency can be detected in the Net-Energy growth and the Net-Energy lactation. 

  • Investigations on Mud on Heavy Metal Contaminated Flood-Plain of Tisza
    96-101
    Views:
    136

    At the beginning of the year 2000 subsequently to a mine accident high heavy metal content mud entered the catchment area of the Tisza and was transported through the whole Hungarian section of the river. The majority of the heavy metals had been bounded to the floating sediment that was deposited on the flood-plain soil during flood forming a new, 5-10 cm thick layer. In the mud samples collected after the flood there was a clearly visible dark grey layer with significantly higher heavy metal content that was formed by the pollution wave and it was sorruonded by a light layer. The upper layer of flood-plain soils are formed from this mud layer during the soil development process, so the amount of Lakanen-Erviö soluble heavy metals that correlate with bioavailable heavy metal content was examined as well. In this case only the lead content was significantly higher in the dark layer.
    New mud samples were collected after the 2001 flood. Separate layers could not have been identified, their colour was similar to those of the previous year’s light layers’. Comparing to this light layer the total Zn and Lakanen-Erivö soluble metal content was significantly lower in the mud samples of the year 2001. While the proportions of total and Lakanen-Erviö soluble metal concentrations were equal in both of the layers regarding the elements, these ratios have significantly changed next year regarding Pb and Zn: the amount of Lakanen-Erviö soluble metals considerably decreased.
    As a result of sequential extraction the heavy metal content was rather low in the water soluble and exchangeable and NaOH-soluble fractions, so heavy metals found in the mud could be released in greater amount only in case of a heavy acidification.

  • Using research findings in precision maize production
    227-231
    Views:
    229

    The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers. 
    In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be  used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
    The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot.

  • The impact of crop year and certain agrotechnical factors on maize yield
    13-16
    Views:
    129

    The experiment was set up with eight maize hybrids with different genetic characteristics in 2012. In our study were included hybrids with different length of growing season. We studied the effect of NKP fertilization and plant density on the yield. Comparing to controll treatment it was found that highest yield was at N40+PK treatment. It was three times higher than agro-ecological optimum. Due to the droughty year the effect of plant density it was minimum. The development rate in case of sowing date I. and II. showed an almost identical picture in the scope of the sowing date trial. However, hybrids with excellent adaptability were capable of a yield above average even in this extreme year.

  • The influence of fertilization and tillage method on the formation root system capacity and grain production of spring barley
    89-93
    Views:
    134

    To evaluate the interaction of year x variety, year x tillage method and year x fertilization on the grain yield and root system capacity (RSC) of spring barley, we ran polyfactorial field trials in agroecological conditions of a warm corn production area in Slovakia, at  Malanta, in 2009 and 2010. The RSC measurements were done using LCR - meter at a frequency of 1 kHz and they took place in four growth stages: at leaf development in the stage of four leaves (RSC1), in full tillering (RSC2), in the stage heading (RSC 3) and at the stage of ripening (RSC4). The values of grain yield, RSC1, RSC2, RSC3, RSC4 reached in 2009 comparison to 2010 were significantly lower. The highest yield in 2009 was reached by variety Marthe (4.49 t.ha-1) and by variety Bojos (7.19 t ha-1) in 2010. The highest values of RSC in observed growth stages were achieved by variety Bojos in 2009, and in 2010 also besides RSC1. Within both years, difference in yields between tillage methods was not observed. The values of RSC in growth stage of 4 leaves and tillering was higher at conventional tillage, butthe values of RSC3 and RSC4 were higher with minimized tillage. The highest grain yield and values of RSC in every growth stage were achieved on the fertilization variant “c“ in 2009 and on the fertilization variant “b“ in 2010. The correlation relationships between grain yield and RSC were significant and positive in every growth stage. The strongest relationship was found among grain yield and RSC (r=0.6047).

  • Estimation of the vine-shoot yield in the Gyöngyös district
    21-26
    Views:
    136

    Every year, a significant amount of vineyard prunings is generated in Hungary. Instead of utilization them, it is burned directly on the field in spite of the limitations of legalization highly pollute the environment in recent decades. The vineyard pruning itself or with other by-products from pomology and forestry can be significant amount of fuel source. However, before the planning to utilization the essential task is to estimate the potential. This study examine that how many vineyard is generated in the micro-region of Gyöngyös in every year on appointed vineyard.

    In order to vine-branch potential calculate more accurate data was necessary so the products had to be determined for all plant. Thus, the biomass resource and the utilization become plannable. As the result of the experiment we can estimate that 1,5 t/ha vineyard pruning are generated. It means more than 9 thousand tons pruning in the micro-region of Gyöngyös. This amount can be convert into fuel source more than 150 thousand GJ heating value.

    The results evince that the vineyard pruning is important fuel source in every year in the micro-region of Gyöngyös. Further usage is suggested for other regions in other size.

  • Grassland association stock of plants the examination of the regeneration of a construction
    185-191
    Views:
    79

    Due to the drastic change in using the nature like grassland association (one-sided overgrazing – one mowing per a year), by the third year of the experiment in every area, where overgrazing stopped, independently on second sowing and nutrient resupply, Borhidi degradation degree decreased. In the areas where overgrazing with large animal density (sheep) continued, degradation degree was 3.4–5.0 by the third year of the experiment, and Hordeum murinum, which causes animal healthy problems, appeared massively.

  • Agronomic bases of precision barley production
    217-220
    Views:
    117

    To ascertain the importance of individual preciosion factors in achieving yield and quality of malting barley, we established a multifactor 
    experiment at the research station of the Slovak University of Agriculture in Nitra in 2009 and 2010. Four variants of fertilization, 2 ways of soil cultivation and four varieties 'Bojos’, 'Kangoo’, 'Marthe’ and 'Xanadu’ were observed. From the quality indicators the nitrogen content (%) was observed. The results were statistically analyzed by using a multifactor analysis of variance by using Statistica 8, the program Statgraphics. The difference between years was statistically significant (1.87 t ha-1) in favour of 2010. The difference was also significant between the varieties 'Bojos’ and ’Kangoo’(1.07 t ha-1), respectively. 'Martha’ and 'Xanadu’ as well as 'Kangoo’ (0.56 resp. 0.33 t ha-1). Conventional soil cultivation in
    comparison with a minimalization technology, demonstrated a  tatistically insignificant increase of yield. Significant differences were obtained between the variants of fertilization. Treatment by using Condit (b-var.) showed a very positive impact in climatic favorable year (2010) with a yield result of 7.42 t ha-1. In comparison with an untreated control, the difference in yield was 0.89 t ha-1. A significant increase of yield was achieved by using the combination of solid fertilizer with foliar fertilizer (LAV + Hakofyt, var.c) 0.47 t ha-1. The crude protein content was statistically influenced by a variety and year. In 2009, the crude protein content was above average (12.38%). Significantly lower attributes were achieved in 2010 (9.90%). From the studied/observed varieties the lowest crude protein content was showed by a variety 'Kangoo’ (1.68%).

  • The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
    67-72
    Views:
    147

    Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.

    In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

  • The Possibilities of Futures and Option Hedge in Price Risk Management for GrainProduction
    72-80
    Views:
    95

    The greataest risk tograin production is fluctuation in market prices, which is over 50% over the course of a year; and year by year, as well. There are real market circumstances in the grain market, instead of state guaranteed fix prices, which was the norm under the former political system.
    According to the general opinion of producers, losses come from their defencelessness against buyers. The real situation is that price risk can be managed by suitable market strategy, and loss production can be avoided.
    Hungary has a futures market (which is organized according to the CBOT system) in the grain sector, which is an unique institute in Europe. This organisation is suitable for hedge businesses and it has convenient technical and institutional background.
    There are two possibilities to make hedge business. One of them is the short hedge with futures contract when the producer sells his product for long term if an acceptable profit is included in market price. In this case seller can protect himself against low market prices.
    This technique can be considered as professional for price risk management, but possibly has financial cost because of the weak financial situation of Hungarian producers this solution seems expensive for them.
    There is an other possibility in the Commodity Exchange for manage price risk, that is the option technique. This solution is suitable for insure prices as well, and has an other additional advantage, namely: there is no financial costs in this case.