Search
Search Results
-
Yield components of hairy vetch (Vicia villosa Roth.) in different sowing technologies on acidic sandy soil
83-88Views:848Nearly a quarter of the agricultural utilized area of our country is made up of sandy soils. Sandy soils are poor in nutrients, and, therefore, the effectiveness of farming is basically determined by the method of maintaining soil fertility and the fertilization practice.
The hairy vetch called Vicia villosa Roth (Sandy Roth.), also known as a sand pioneer, plays a significant role in the exploitation of sandy soils. Its cultivation was started in Hungary in the late 1800s. It is primarily used as green fodder, most recently as a green manure and as a soil protection plant. The lupine is grown mainly as a supportive plant, which was previously rye, and today it is triticale. The ratio of the two plants to each other and the spatial location of plants depend on the method of sowing.
The aim of our work was to present the yields of some of the grain grown in different sowing methods and some of its crops.
-
Applied EDI technologies in food traceability
69-74Views:174Due to globalisation, the new technological developments and the complexity of food supply processes, the European food sector is increasingly becoming more complex. The consumers’ trust in food, triggered and affected by a number of food crises, is low. Today, consumers increasingly expect safe and high quality food and demand information about the origin of their food. Also, economic health of food industry can be greatly affected by food crises; therefore efficient and effective mechanisms are required to assist food industry in tracking and tracing products along the food chain. In this paper we discuss the criteria for efficient and effective traceability system from an IT perspective (mainly data exchange) and we identify key requirements for ICT enabled traceability.
-
Management of phytopathogens by application of green nanobiotechnology: Emerging trends and challenges
15-22Views:574Nanotechnology is highly interdisciplinary and important research area in modern science. The use of nanomaterials offer major advantages due to their unique size, shape and significantly improved physical, chemical, biological and antimicrobial properties. Physicochemical and antimicrobial properties of metal nanoparticles have received much attention of researchers. There are different methods i.e. chemical, physical and biological for synthesis of nanoparticles. Chemical and physical methods have some limitations, and therefore, biological methods are needed to develop environment-friendly synthesis of nanoparticles. Moreover, biological method for the production of nanoparticles is simpler than chemical method as biological agents secrete large amount of enzymes, which reduce metals and can be responsible for the synthesis and capping on nanoparticles.
Biological systems for nanoparticle synthesis include plants, fungi, bacteria, yeasts, and actinomycetes. Many plant species including Opuntia ficus-indica, Azardirachta indica, Lawsonia inermis, Triticum aestivum, Hydrilla verticillata, Citrus medica, Catharanthus roseus, Avena sativa, etc., bacteria, such as Bacillus subtilis, Sulfate-Reducing Bacteria, Pseudomonas stutzeri, Lactobacillus sp., Klebsiella aerogenes, Torulopsis sp., and fungi, like Fusarium spp. Aspergillus spp., Verticillium spp., Saccharomyces cerevisae MKY3, Phoma spp. etc. have been exploited for the synthesis of different nanoparticles. Among all biological systems, fungi have been found to be more efficient system for synthesis of metal nanoparticles as they are easy to grow, produce more biomass and secret many enzymes. We proposed the term myconanotechnology (myco = fungi, nanotechnology = the creation and exploitation of materials in the size range of 1–100 nm). Myconanotechnology is the interface between mycology and nanotechnology, and is an exciting new applied interdisciplinary science that may have considerable potential, partly due to the wide range and diversity of fungi.
Nanotechnology is the promising tool to improve agricultural productivity though delivery of genes and drug molecules to target sites at cellular levels, genetic improvement, and nano-array based gene-technologies for gene expressions in plants and also use of nanoparticles-based gene transfer for breeding of varieties resistant to different pathogens and pests. The nanoparticles like copper (Cu), silver (Ag), titanium (Ti) and chitosan have shown their potential as novel antimicrobials for the management of pathogenic microorganisms affecting agricultural crops. Different experiments confirmed that fungal hyphae and conidial germination of pathogenic fungi are significantly inhibited by copper nanoparticles. The nanotechnologies can be used for the disease detection and also for its management. The progress in development of nano-herbicides, nano-fungicides and nano-pesticides will open up new avenues in the field of management of plant pathogens. The use of different nanoparticles in agriculture will increase productivity of crop. It is the necessity of time to use nanotechnology in agriculture with extensive experimental trials. However, there are challenges particularly the toxicity, which is not a big issue as compared to fungicides and pesticides.
-
Effects of fermented and supplemented chicken manure on the nutrient management aspects of an apple orchard
117-123Views:629AIt is a huge challenge for farmers worldwide to successfully increase the organic matter content of their soils and improve their water balance at the same time. Therefore, the main aim of the study is to develop and test organic-based nutrient composite materials that can be successfully used by farmers to increase soil organic matter content, improve water management parameters and implement water-efficient technologies. The study was performed in the orchard of the Institute of Horticultural Science of the University of Debrecen in Hungary (Debrecen-Pallag). The experiment was set up in a ten-year-old apple (Malus domestica ‘Pinova’) orchard. In the trial, fermented poultry manure and superabsorbent polymers (SAP) were used at different doses to study their effects on soil properties and fruit quality. Applied composite materials increased the nitrate and organic nitrogen content of the soil. Treatments did not affect the sugar content of the fruits but significantly and positively affected the individual fruit weight and the titratable acidity of the fruits.
-
Modern Food Safety and Product Identification
339-345Views:199In the beginning of the 21st century the matter of food safety plays an accentuated role in the food industry. Important issues in this topic are the risk of bioterrorism, impurities in the food chain and the ascendancy of customer needs. The solutions of these problems are the introduction of modern quality assurance systems, traceability and identification of products. I review in this paper the possibilities of these systems, the potential advantages and incidental costs. In the tight frame of this paper – omitting the descriptions of technologies – I discuss the most important criterions of systems, which may be able to solve today’s quality food industry problems.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:380Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
The effects of curing technology on the rheological and organoleptic features of meat products
139-142Views:191Meat products are important staple foodstuffs owing to their high protein, vitamin and mineral content. Meat plants do not only use traditional production technologies but also develop methods that preserve the nutritional value of meat or improve the texture and organoleptic features of meat products. These features play an important role in the consumer society. Consumers first meet the external features of meat and this experience influences their decisions. Our analyses compared a traditional and a new curing procedure. Besides organoleptic inspections, we analysed texture with a CT3 type Texture Analyser to obtain quantified information on the condition of meat samples in the various curing phases. We used our results to compare traditional and new curing procedures.
-
Food problem and its solution
19-23Views:200The Globalization processes substantially changed relations between countries. One of main factors of these processes is forming in ХХ century of Worldwide auction organization, which activity provided with swift growth of volumes in trade of food commodities. Thus, the solution for global food problem was found. At the end of the second half of ХХ century the production volumes of agrarian goods in countries with a different level of economic development grew considerably. However, a food crisis 2007–2008 led to the necessity to define factors, which would allow to grow production, converting an agrarian sector into sustainable growing industry, passing ahead the increase of quantity of population. -
Effect of Planting Time of Maize on Factors Influencing Yields in 2001-2002
112-116Views:179In this paper we analysed the results of maize planting time experiments by the Department of Crop Sciences and Applied Ecology of the University of Debrecen, Centre of Agricultural Sciences in 2001. We made the experiments at the experimental garden of DE ATC in Hajdúböszörmény.
We examined in 2001, 2002 ten hybrids with three planting times. The results were analysed by analysis of variance with two factors. In 2001 the yields were high, between 7.2-11.6 t/ha. The seed moisture contant of hybrids was 6-8% less after early planting than after late planting. The vegetation period of the hybrids became longer after early planting, which helped the drying-down of the hybrid and determined the seed moisture content at harvest to a great extent.
In 2002 the yields were high, between 4.02-10.47 t/ha. The seed moisture contant of hybrids was 5-14% less after early planting than after late planting.
On the basis of the above, variety specific technologies should be applied where the planting time is adapted to the hybrids. In accordance with the other cultivation factors. -
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
399-410Views:634Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea. Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark (www.biocat-project.com). Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.
The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.
The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.
-
Novel Applications of Microwave Techniques in the Food and Environmental Industries
29-34Views:221During the microwave processing, despite the conventional heating, the material heats consistently inside. This property of microwave is utilized by drying and dehydration processes. The thermal sensitivity of raw materials of food industry requires development of gentle, fast and controllable technologies, which is realizable by means of combination of conventional and microwave techniques. The other important application area of the microwave technique is food industrial practice is enhancing the microbial safety of products, mainly by pasteurization processes. In recent time the strict environmental regulation necessitate developing more effective treatment of wastes, waste waters and sewage sludge. Because a part of these techniques are heat and power demanded, the microwave technique may be an alternative process in execution of sludge conditioning, drying or gasification and pyrolysis.
-
The effects of bioactive feed additives for the production parameters of common carp (Cyprinus carpio) fingerlings in intensive recirculating system
35-41Views:475For the appropriate quantity and quality of fish meat the pond farmers need to use up to date nutrition and feeding technologies. Recently the intensification of the carp production is stepping up with the availability the proper quality of the artificial feeds. The using of different feed additives make a better feed conservation ratio, faster growing rates and more uniform stocks.
In our experiment what is made with common carp (duration of the experiment was 8 weeks long) we compared two different kinds of feed additives in different doses. One of them contains only natural mineral elements and the other additive is a natural origin probiotics. Both additives were used in the quantity of 0.5, 1 and 2% of the total feed. By the result of the 8 weeks experiment it could be said, that the using of the humic acid based mineral elements feed additive. Makes a better FCR comparing with the control stock, but was not as good as the using of the probiotics. At the humic acid treatments the more doses, the better FCR value, but at the probiotics it wasn’t true. The 0.5% probiotic treatment gave the best result. It is concluded that the using of the probiotic feed additives always gave a better performance of the fishes (average weight, biomass, FCR) than the humic acid treatments. The using of the feed additives hasn’t got an influence for the survival rate of the carps.
-
A new model for predicting carbon storage dynamics and emissions related to the waste management of wood products: introduction of the HWP-RIAL model
75-81Views:357The ability of wood products to store carbon allows for their significant contribution to the climate mitigation efforts and the emission reduction commitments set by the EU. In order to optimise the carbon storage capacity of wood products, it is important to take climate mitigation aspects into consideration as much as possible during their production, use and waste management. The aim of this study was to quantify the effects of product development, recycling, and waste management technologies on carbon storage and emissions. In the frame of the ForestLab project, a new model and decision support tool was developed, which is able to predict the duration of carbon storage of wood products and the evolution of emissions from them. The developed HWP-RIAL model (Harvested Wood Product Recycling, Incineration And Landfill model) uses the methodology of the Intergovernmental Panel on Climate Change (IPCC) to calculate emissions, which is also used in the National Greenhouse Gas Inventory report. It combines the IPCC waste model with equations describing the carbon storage and emissions of wood products, and the model is also supplemented with a self-developed recycling and waste routing module. This paper provides insight into the operation of the model by following the life cycle of 200,000 m3 particle board.
-
Large Scale Measurement of the Total Antioxidant Capacity of Different hungaricum Fruit and Vegetable Samples with Photochem Chemiluminometric Device
300-304Views:254In our present study, we performed a quick test of the antioxidant capacity of domestic fruit and vegetable cultivars with a PHOTOCHEM® instrument (Analytik Jena AG, Germany). The instrument is special because it can measure both the total lipid-soluble antioxidant capacity (ACL method) and the total water-soluble antioxidant capacity. Another advantage of the system is its quick measurement. With similar instruments, such measurement can take several hours, while PHOTOCHEM® can perform it within a few minutes.
In our model studies, we examined the changes in the antioxidant capacity of sour cherry, green pepper, carrot, pumpkin, red beet and Brassica sp. cultivars. We aimed to determine how suitable the instrument is for quick, routine measurements in the case of the different horticultural products and which species have high antioxidant capacity values.
On the basis of our examinations, we can state that the PHOTOCHEM® system is suitable for routine, semi-automated measurements of the total antioxidant capacity at several vegetables and fruits. Besides this, the system can be used for testing the quality of food products, for monitoring storability in post-harvest technologies, and for special breeding programmes and for physiological and biotechnological studies. -
Population genetic results of Hungarian Botrytis cinerea isolates establishing new technologies with decreased chemical usage against grey mould
259-261Views:265Botrytis cinerea causes gray mold on a high number of crop plants. Information about the populations of plant pathogen fungi may help to develop new strategies for the effective and economic crop protection with reduced fungicide usage. Hungarian B. cinerea populations were characterized with using different molecular genetic parameters. B. cinerea group I strains, characterized with high rate of fenhexamid resistance, could be detected only in restricted number. The Hungarian B. cinerea populations were characterized with high genetic diversity, and the regular occurrence of sexual reproduction. These results highlight the importance of rotating different type of fungicide in the plant protection technology against grey mould.
-
The recent state of cryopreservation techniques for ex-situ gene conservation and breeding purposes in small ruminants: A review
81-87Views:540The viewpoint of the recent cryopreservation techniques (CT) suggests the use of a reduced volume of cryopreservation solution, high concentration of cryoprotectants and ultra-rapid cooling and warming rates help to reduce cryo-injury and maximize the viability of the preserved animal genetic resources (AnGR). The CT had now become widely accepted as one of the best methods of choice for the ex-situ conservation of AnGR due to its high success rate recorded and no-invasive nature as compared to the conventional slow rate freezing (CSRF). Rapid advances and wide acceptability of the use of assisted reproductive technologies (ART’s) particularly artificial insemination (AI) in animal breeding had resulted in a greater loss of a large number of good quality genes in virtually almost all the native breeds of animals across the globe. Small ruminant (SR) animals are not an exception in such present predicaments situation of erosion and dilution of the valuable AnGR among the native breeds. As a result of this, 148 and 16 breeds of sheep and goats respectively have already become extinct in Europe and the Caucasus. In view of the aforementioned situation, the present review aimed at exploring some of the current states of development, roles played and potentials of CT in the conservation of SR genes and genome for the immediate and future breeding purposes for sustainable development. It basically covers; animal genetic resource, the need to conserve AnGR, tools for ex situ in vitro conservation of AnGR and recent developments in breeding and cryopreservation of SR AnGR.
Cryopreservation is playing a pivotal role in ex-situ gene conservation of AnGR. Decline in genetic diversity among SR breed population was high in Europe and the Caucasus. There is therefore, need for improvent on current stringent measures on conservation of AnGR in this region of the world.
-
Survey of the environmental impacts of pond fish farming
19-24Views:197The aim of this study was to survey the nitrogen, phosphorus and organic matter loads and the discharge of fishponds. The inputs and outputs of nutrient amounts of fishponds and their sources are described. The impact of a fishpond on the nutrient loads of receiver waters was determined. The investigations of this study were to determine and evaluate the nitrogen, phosphorus and organic matter budget of fishponds representing different technologies and areas.
-
Development directions of microregional spatial environments
61-64Views:294The question how economic, technological and infrastructural developments, as well as products and technologies contribute to the unity and constant strengthening of the society is still unanswered both in Europe and the whole world.
The current erosion of the society and the weakening social cohesion is a regrettable process. These phenomena are a barrier to real development processes and weaken the extension of the economic space; therefore, this negative process has to be stopped and turned into a positive direction.
For this reason, it is increasingly urgent to work out new, feasible solutions, since it has become obvious that solutions whose sole aim is to increase profit typically weaken the indispensable unity of the society, market positions, innovation processes, as well as natural and environmental harmony.
In this situation, we analysed and interpreted the disadvantaged and multiply disadvantaged microregional spatial environments, with special regard to the strategic developments that serve both the strengthening of the microsocieties of microregional spaces and the development of the economy and the extension of economic space.
The identification of disadvantaged microregional spaces is basically done by means of economic indexes, but it is also important to emphasise that these indexes can only be interpreted with social indexes, as they define the situation of the microregional space and the possible development directions together.
The constant strengthening of social unity (cohesion) and the related economic development is basically a new focal point and objective.
-
Centre of Agri-Knowledge – a Web-Based Integration of Information and Decision Support Systems for Agriculture
64-66Views:184The University Debrecen Centre of Agricultural Sciences acts as the centre and co-ordinator of agrarian higher education and consultation in the eastern region of Hungary. New internet technologies afford new chances to accomplish the institute’s mission to develop agriculture, environment and countryside in the area. As the main framework of integrated e-learning, e-business and research in the agrifood sector the development of an internet portal, the „Centre of Agri-knowledge” (CAK) has been started in the recent past.
To support our students and education, to stay continuous in touch with our agricultural engineers we consider very important to build internet communities, where students, farmers, traders and researchers can share their knowledge and experience.
In Europe same as in Hungary agriportals born and disappear continuously. Although CAK is still in its early stage of development, its comprehensiveness, professional backend and the experience of the Centre of Agricultural Sciences guarantee a new standard of online services in the Hungarian agrifood sector -
Interpretation of sustainability in the utilization of renewable energy sources
61-64Views:270The utilization of renewable energy sources (res) is crucial regarding to sustainable reconstruction of energy systems. The target is a balanced, sustainable development of Hungarian energy management considering equally the ecological, social and economic aspects. There are many different technologies of utilization of res varied by sources, conversion processes, size and products. The comparison of each technology and their sustainability assessment are required by the importance of efficient remodeling of energy infrastructure. The group of attributes was composed by numerous important parameters in the course of our analysis with the choice experiment (ce) methodology. The estimation of each attributes’ influence on the individual’s preferences and choices was possible by this method and the preferences of the statistical population was concluded. So thus the utility derived from each attribute was estimated. The result of the ce analysis for the population of experts is demonstrated in the current phase of our research.
-
The irrigation influence under the soil, microclimate and plants in maize from Crişurilor Plain
180-186Views:277The paper is based on the researches carried out in the long term trial placed on the preluvosoil from Oradea in 1976, for establishing
the soil water balance. In the irrigated variant the soil moisture was determined 10 to 10 days for maintaining the soil water reserve on
irrigation depth (0 – 50 cm for wheat and bean, 0 – 75cm for maize, sunflower, soybean, sugarbeet, potato and alfalfa 1st year and 0 – 100
cm for alfalfa 2nd year) between easily available water content and field capacity. Thus, an average irrigation rate of 2560 m³/ha was used
in the 9 experimental crops. The average of the annual rainfall for the 1976 – 2008 period was of 625.0 mm. The technologies used were
correlated with the needes of the crops, such as melioration crop rotation, chemical fertilizers in accordance with the chemical export on the
yield, manure (40 t/ha) was used in potato and sugarbeet. After 33 years of the irrigation use the soil structure degree (38.62%) did not
decrease when compared to the unirrigated maize – wheat crop rotation (37.01%). Bulk density, total porosity, penetration resistance and
hydraulic conductivity have worse values than the ones in the unirrigated variant. The humus content is very close to the humus content
determined in 1976, the phosphorus and the potassium content increased very much in comparison with the initial content (117 ppm vs 22.0
ppm); (180.0 ppm vs 102 ppm). The use of the adequate fertilization system and of the irrigation water with a good qaulity did not determine
a decrease of the pH value of the soil. The irrigation determined the improve of the microclimate conditions, the increase of the plant water
consumption, yield gains very significant statistically and higher protein content of the maize grains. -
Pre- and postharvest technologies to extend the shelf life of Prunus cerasus
85-89Views:446Fresh tart cherry consumption cannot be increased without the development of an appropriate technology for its elongated storage. This requires the development and optimization of the pre- and postharvest treatments. Currently, we have only limited knowledge about tart cherry (Prunus cerasus L.) postharvest technology, however, related studies on sweet cherry (Prunus avium L.) may be adopted. In this article, we have collected the most important research results in this topic.
-
The European Research Area: in quest of the Lisbon goals
73-79Views:208strong educational and scientific knowledge basie is one of Europe's traditional key assets that has made it possible for our continent to become world class in several research fields. Despite these great achievements, the position of the European research and technological development (RTD) potential is currently being challenged by a rapidly changing global competition, including the two main rivals, the US and Japan. The European Union (EU) is behind these countries as regards research and innovation output. Moreover, European research is faced with the
implications of globalisation of markets and industries, digitalisation and new technologies, as well as a need to address societal issues such as an ageing population or climate change.
At the same time, the European Union (EU) is facing the uneven distribution of RTD capacities and excellence within its own borders, especially the EU12 countries are lagging behind in this
respect.
In order to meet this twofold challenge the EU has to step up its efforts for the creation of a legitimate "European Research Area" that will make the EU more competitive on the international scene, and also encourage the less developed EU member states to invest more and better into research and innovation. -
Renewables in higher education
151-154Views:280Unfortunately Hungary is not too rich in natural resources, so particularly important the materials and energy-saving technologies, waste recovery, increasing the share of renewable energy. It is a complex ecological strategy which priorities of the Hungarian education and calls on the student’s attention to ecological issues, pollution and the environmental load and look for specific opportunities for the realization of sustainable development. I consider, in addition to the specific operating continuously reduce costs of the campuses we should integrate the practical experience in to engineering education.