Search
Search Results
-
Study of plant production modells with different intensity in winter wheat production
51-60Views:127The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, intensive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
100 mm) were applied in different crop rotation systems.
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was 7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649). -
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
47-54Views:177Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies. -
Evaluation of technologies and resources from the spatial and social aspect
73-75Views:233The basic functioning of the world is mostly led by negative trends. One of the fundamental reasons for this phenomenon is that the different technologies (hardware, software, resources) do not act properly and in the proper structure by means of the produced products and services. Therefore, the examination of technologies and resources is a key question of our world and development from various aspects. Technologies convey all positive and negative impacts which can be regarded as the fundamental reasons and causes of harmonious or disharmonious development. For this reason, the role of technologies in development and harmonious functioning is of paramount importance.
As a final conclusion, we established that the different technologies (hardware, software, resources) are interpreted as impact conveyors which predominate by means of products and services in a way that their relation system is determined. By using the thermodynamic interpretation which is the basis of the functioning of the world, we built a system consisting of 14 elements to evaluate different technologies, to interpret its functioning and to develop positive interactions and trends.
-
The effects of agrotechnological factors on winter wheat yield in humid cropyear
162-167Views:129The effects of crop rotation, nutrien supply and crop protection technologies, as well as the appearance of the main ear- and leafdiseases
(powdery mildew, helminthosporium leaf spot, leaf rust, fusarium) were studied on the crop yields of winter wheat variety MV
Pálma during the 2009/2010 crop year. The experiments were conducted in triculture (pea – wheat – corn) and biculture (wheat – corn), at
five nutrition levels, with the use of three crop protection technologies (extensive, conventional and intensive) at the Látókép Research Site of
the University of Debrecen, Centre of Agricultural Sciences. Our results proved that the appearance of leaf- and ear-diseases were
significant in the wheat cultures during the 2009/2010 crop year, because of the rainy, warmer than usual weather, the lodging, and the huge
vegetative mass developed. The most severe infections by the four examined diseases after pea and corn pre-crops were observed at
extensive crop protection levels, when fertilizers were used at the highest dose.
Following corn pre-crop, in the case of all the three crop protection technologies the maximum rate of wheat yield results were achieved
at N150+PK level. The highest yield was reached at intensive crop protection level (6079 kg ha-1). In triculture, in case of all the three crop
protection technologies the maximum yields were achieved at N50+PK level; in extensive technology 5041 kg·ha-1 yield, in conventional
technology 6190 kg ha-1 yield was realised, while in the intensive technological model the yield was 7228 kg ha-1.
The relationship between yield and fertilizer amounts, the rate of pathogen contaminations, crop protection technologies and pre-crops
was defined with correlation analysis in case of different crop rotations during the 2009/2010 crop year. Based on the results of the
experiment, we found that in stands after corn pre-crop strong positive correlation was established between the crop protection level and the
crop yield (0.543), the nutrient levels and the emergence of the four examined pathogens, and between the nutrient levels and the yield
(0.639). Extremly strong positive correlation was observed between crop protection and yield (0.843) in triculture. Strong positive
correlation was detected between the nutrient levels and the presence of the four examined pathogens, as well as between nutrient and
lodging (0.688). Strong negative correlation was between the crop protection level and the four examined diseases both in biculture and
triculture. -
Impacts of ethnoveterinary medicine integrated with livestock farm technologies on the performance and antimicrobial resistance of indigenous goats in South Africa –A review
93-103Views:124Ethnoveterinary medicine and livestock farm technologies represent a junction of innovation and tradition with the aim to accomplish livestock systems that are resilient, productive, and sustainable to meet 21st century challenges, especially the antimicrobial resistance issue. This article aims to emphasise the impacts of integrating ethnoveterinary medicine with livestock farm technologies on the performance of indigenous goats in South Africa. With the growing concern over antimicrobial resistance in livestock, there is a pressing need for complementary approaches to the health of animals and their productivity. In this review, the aim evaluated whether an integrative approach could offer a sustainable alternative that benefits animal health and productivity while addressing the concerns of antimicrobial resistance. Comparative study designs across multiple indigenous goat farms were used to integrate specific medicinal plants in ethnoveterinary medicine with present-day livestock technologies that are used to monitor the effects on livestock performance indicators and antimicrobial resistance patterns. In the treated populations, the outcomes were indicative of substantial improvements in reproduction and growth rates, and alongside, there has been a notable decrease in the markers of antimicrobial resistance. Therefore, it is proposed that through these discoveries, the integration of these traditional and modern approaches not only improve the performance of indigenous goats but also contribute immensely to the mitigation of risks associated with antimicrobial resistance.
-
Economic questions of precision maize production on chernozem soil
293-296Views:132It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common implementation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the change
of the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies. -
Applicability of precision weed detection technologies
163-168Views:218In an agricultural field or horticultural plantation, weeds compete with cultivated plants for water and nutrients. The transpirated water by the weeds is needed to be replaced, which saddles surplus costs on the farmer, which could reduce the profitability of crop production. The aim of the precision plant protection system is to protect cultivated plants by applying site-specific technologies and optimized herbicides combination and methods, without environmental damage. The first step of precision weed control is the scouting for weeds. Traditional and modern (passive and active remote sensing) weed surveying technologies are available to detect weeds. The examination was carried out in an intensive apple orchard with drip irrigation system, protected by hail net of the Study and Regional Research Farm of the University of Debrecen near Pallag. The spectral-based weed detection was worked out by the Tetracam ADC broadband multispectral camera and the GreenSeeker 505 vegetation indexmeter. A strong correlation observed between vegetation indices and weed coverage. Based on the collected data, weed maps are created in appropriate software environment, thus the spatial distributions of the weeds are determined. The species level discrimination and the recognition of weed structural parameters were executed based on the 3D point cloud data by Leica ScanStation C10 laser scanner.
-
Wheat cleaning and milling technologies to reduce DON toxin contamination
89-95Views:266Mycotoxicosis caused by Fusarium fungi holds a huge risk considering economic and food safety issues worldwide. By applying milling technologies, we attempted to reduce the concentrates of DON toxin, as it is the most often found toxin in wheat.
The processes of sieving, aspiration and combination had been used on wheat with high DON toxin concentration. As a next step, grains were sorted using a horizontal cylinder separator, assorted by an optical and a gravity separator, and finally, the products were scoured and ground. The contamination level of the wheat and flour samples were defined by the HPLC-MS method.
Regarding the results, it can be stated that toxin concentration was most effectively reduced by optical separation and scouring, and by applying these milling techniques, food safety can be increased significantly.
-
The management and economical aspects of GPS based machine-control and tractor-implement sincronisation
161-167Views:207Precision farming has an array of technological equipment, elements and complete systems which are in themselves suitable to create conditions for efficient farming, to reduce environmental load and to provide farmers with optimal return on their investment.
On the leading edge of my research is to introduce the economic benefits of precision logistic optimization with satellite navigation in wheat and maize harvesting. My hypothesis, claiming that a well-organized system can increase the number of working days by 4 days per harvesting season in maize, and 2 days in wheat crop. If the farmer makes contract works for harvesting it means for him 2 or 4 days extra work by using the precision farming technologies with satellite communication system. Overall, as pertains to wheat and maize harvest seasons, yearly revenues can be increased by 7 760 000 HUF. I would like to introduce that the precision technologies increase combine costs by merely 5.4% which can be return in the first year of using.
-
The Effect of Forecrop and Plant Protection on the Pathology Parameters and Yields of Winter Wheat
84-89Views:113We carried out our experiment in the cropyears of 2000/2001, 2001/2002 and 2002/2003, on calcareous chernozem soil, at the experimental site of the Debrecen University Farm and Regional Research Institute, at Látókép. We examined the disease resistance and the yield quantity of Mv Magvas variety by adopting different forecrops and plant protection technologies, at 30+30 N level and at normal cereal row spacing. We applied two forecrops (wheat and pea) and two plant protection technologies (extensive and intensive). We measured the rate of infection by population survey in the first ten days of June.
In the course of our examinations, we found, that the rate of powdery mildew infection was higher in the thicker population sown after pea forecrop in all three years, as powdery mildew is not a typical cereal disease.
The infection rate of leaf mildew and DTR (Dreschlera tritici-repentis) was higher after wheat forecrop in all examined years, because these are typical wheat diseases and infection centres in the soil promote the spreading of these diseases. However, it was possible to parry the adverse effect of forecrops by intensive plant protection.
Due to the chernozem soil, wich has good water management features, and due to the good preparation of the seedbed, the effect of forecrops on yield quantity did not appear in the examined years. The quantity of the yield was only slightly larger after pea forecrop in the cropyears of 2000/2001 and 2002/2003 than after wheat. Nonetheless, the data of technical literatures state that the yield quantity can be larger, even by 15-20%, after pea forecrop.
In the course of intensive plant protection technology, we applied systemic pesticides, while in the course of environmentally sound technology, we used contact pesticides of sulphur content. In those populations that were treated with environmentally sound plant protection technology, infection rate was higher in all three years.
Yield quantities were somewhat lower in the course of applying extensive, environmentally sound technology, because diseases appeared in these populations to the higher degree. Powdery mildew does not, but leaf mildew and Dreschlera tritici-repentis have a significant yield decreasing effect. With appropriate, well-selected fungicides, we were able to keep every leaf diseases well in hand, and the rate of infection was almost independent of the influence of the breeding year. -
Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
121-126Views:423Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.
-
Information Technology Supports for Student-Centered Language Education
3-6Views:92With the development of computer-mediated communication, the definition of literacy has gained broader dimensions (Murray, 1991). The ability to use new technologies to access, adapt and make intelligent use of information and knowledge is by now viewed as an additional and essential component of literacy. Today’s interpretation of literacy (often referred to as “multiliteracy”) must incorporate the communication that takes place through a growing variety of text forms associated with information and multimedia technologies.
Since it is fast becoming a basic instrument for building the literacies required for success in academic and workforce environments, used as a tool, information technology needs to become a critical component of student-centered English language education. -
Effect of two different cropyear and the agrotechnological factors on the agronomic characteristic of the winter weat in a lon-term experiment
143-149Views:137We studied the effects of crop rotation, fertilization and crop protection technologies on occurence of the major ear- and leaf-diseases (powdery mildew, helminthosporiosis, leaf rust, Fusarium wilt) and the degree of lodging in the winter wheat variety Mv Pálma in two very different years (2006/2007=dry; 2009/2010=rainy). The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen CAAES in triculture (pea-wheat-maize) and biculture (wheat-maize) at five fertilization levels by applying three different crop protection technologies (extensive, average, intensive).
In the cropyear of 2006/2007, the disease severity of leaf diseases was higher than the average in both crop rotations in spite of the fact that the weather during the whole vegetation period was dry. Infection by powdery mildew, helminthosporiosis and leaf rust increased with increasing fertilization, the highest infection was measured at the highest fertilization level (N200+PK) in the extensive crop protection technology. According to the results, no infection of ears by Fusarium and no lodging occurred in either bi- or triculture due to the dry year. The extremely rainy weather in 2009/2010 was favourable not only for the vegetative development of the stand, but also increased the occurance of leaf-, stalk- and ear-diseases and a high degree of lodging was observed. The highest infection by powdery mildew was observed in the plots with the highest fertilizer dosage under an extensive crop protection technology. A much higher helminthosporiosis infection was measured than in the cropyear of 2006/2007. The wet weather and higher than average temperature promoted the occurence and spreading of leaf rust. Under an extensive crop protection technology, a leaf rust infection of 24% and 31% was detected after maize and pea as a forecrop, respectively, in the N200+PK treatment. As opposed to 2006/2007, the disease severity of Fusarium was 3–8% and 2–7% in the control after maize and pea as a forecrop, respectively. This value, similarly to that of other pathogens, increased with increasing fertilization levels. Due to the large vegetative mass, a significant lodging was observed in the wheat stands in both bi- and triculture (17–100%, 12–100%). -
Nutrient deficiency and effects of various nutrition technologies on crop health
109-113Views:295The impacts of climate change on crop production are increasingly noticeable. Extreme weather conditions – such as devastating droughts, which occur more often – have serious effects on crop conditions, thus damaging their defence ability against pathogens and pests. Therefore, in order to achieve high-quality and high yielding crops, it is urgent to elaborate new technologies that improve general condition of crops and prevent development of nutrient diseases. Those crops which suffer from the lack of certain nutrients are more sensitive and their tolerance against diseases are decreased. Nitrogen – as the most influencing macronutrient in yield – is also essential in maintaining crop health. Nevertheless, due to the complicated processes in soil (such as leaching, denitrification), the utilization of nitrogen is not nearly complete, therefore nitrogen stabilizers may be needed to maximize this factor. The use of these stabilizers can be promising where plants with high nitrogen content are grown, although further experiments are needed in which impacts of nitrogen stabilizers on crop protection aspects are examined as well, since there is a close correlation between exaggerated nitrogen fertilizing and sensitivity to pests. During my research I am going to examine the combined effect of foliar fertilizer and nitrogen stabilizer on crop health. Furthermore, my goal is to find clear correlation between pathogens and the different technological variants of nutrition.
-
Comparison of apricot cultivars for suitability for organic growing
63-65Views:78Nowadays, important task is using more widely the environmentally friendly production technologies. There are considerable differences
among technologies using reduced spray programs (integrated and organic) in plant protection and plant nutrition.
In this case integrated production has a better position as roles for organic production more strict and due to this fruits has an obvious
temporal and permanent reduction in tree conditions. Fitotechnical elements and renewal and regeneration of cultivars are important
factors for offseting or delaying of condition weakening.
In this study, 5 apricot cultivars (not pruned for 8 years) were compared in their characteristics (assessment of inactive, semi-active and
active plant parts).
Our study showed that there were 50-70% differences among observed characteristics. Our study confirmed those cultivars which are
suitable for organic production and which one more resistant to condition weakening and which one able to tolerate negative technological
effects. -
Product orientated sewage sludge composting technologies in the practice of AKSD Ltd.
33-36Views:142In recent years the regulations of the EU unambiguously determine that the biodegradable wastes should be used for biogas production or composting. The direct use of sewage sludge in agriculture is limited by its hazardous microelement content, but it can be used effectively in composting. The limitation parameters can be extinguished with correct compost-mixture and technology variants. The exact determination of the technologies and mixtures result a stable, constant quality product. The compost, as a classified product, is friable structured. The end-product is a
homogeneous mould with good water capacity, does not contain any weed seeds and pathogenic organisms. The compost does not have a acidify effect on the soil. It is an effective fertilizer thanks to its macro and microelement content. -
Comparative analysis of maize weed control system and the competitive effect of sorghum
97-104Views:110In our investigation we used different weed control technologies in the different phenology states of the maize. The experiment have been
carried out in Hódmezővásárhely, in the Experiment garden of the Pilot farm of University of Szeged Faculty of Agriculture, on meadow
chernozem soil, on 24 m2 plots, in 3 replications, randomized blotch design. The experiment can be regarded as 15 weed-control strategies
where, in addition to the untreated control, six chemicals or chemical-combinations are applied (Spectrum 720 EC, Motivell Turbo D,
Stellar + Dash HC, Clio + Akris SE + Dash HC, Clio + Dash HC) in five different times (pre, early post, post and two late post) and eight
mechanical weed-control technologies were used. Hoeing took place connected to the herbicide treatments in different times: until 2-3-leave
age weedless, in 3-4-leave age hoed once, from 3-4-leave age weedless, in 6-7-leave age hoed once, from 6-7-leave age weedless, in 8-leave
age hoed once, from 8-leave age weedless.
Our results were assessed by chemical efficiency examination, maize length measurement, corncob-length and fertility examination,
Sorghum plant-number determination and yield weighing carried out in four periods. The data were evaluated by a one-factor analysis of
variance and a two-factor linear regression analysis. -
The state of the Hungarian ornamental horticulture industry, recommendations for development
353-355Views:163R&D and innovative technologies are required in the EU for being competitive on the world market. Education and professional co-ordination is vitally important, as well as maintenance and development of our genetic bases.
-
Development of precision apple production technologies in Institute of Water and Environmental Management
97-101Views:251From the precision agriculture point of view, by the rapid development of the investigated technological elements – global positioning system (GPS), remote sensing (RS), global information system (GIS) – the number of services, which were not available in the past, because of their speed, complexity or price are increasing. The high accuracy high-tech instruments provide opportunity to elaborate several fruit production technologies, which aim is creating and operating water and energy safe quality fruit production systems. To evaluate these possibilities, experience was carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer, and a ScanStation C10 laser scanner by Leica. The results show the absolute applicability of these equipments in precision horticulture.
-
The examination of presumed Escherichia coli count of raw milk samples on several milk production farms
31-37Views:172For dairy farms, it is of great importance to insure the appropriate hygienic status of milk and to examine it regularly. Escherichia coli, belonging to the coliform bacteria type of, is a good indicator of contamination, and therefore suitable for characterising the hygienic condition of milk production.
The aim of our research was to examine the connection between the Escherichi coli count in bulk tank milk and housing and milking technologies of different-sizes farms. We examined the relation using various statistical methods.
Analysing the connection between the E. coli count and the farm size we found no significant difference between the farms. On the basis of the mean values of the E. coli count, we can say that the hygienic conditions are appropriate for mid-sized farms, and tolerable for large farms. We found differences in the hygienic status among the small farms. Half of the eight small farms, had no adequate hygiene. The results of the analysis of the quality categories show that the probability of inadequate quality milk was the largest on small farms (37.5%).
Comparing the various housing and milking methods with each other, there were numerical differences in the E. coli count, but these differences were not significant. We got higher E. coli count values on those farms using tied stall barn and bucket milking installation. The reason for this could be that in cases of farms using bucket milking installation, it is harder to meet the requirements.
After forming groups by farm size, housing and milking methods, we found that the E. coli counts are adequate on mid-size farms using various housing and milking methods; and tolerable on those large farms using loose housing stable and a milking parlour. At the same time, we found inadequate E. coli counts on the smaller farms using tied stall barns and bucket milking installation.
The results show that if there is suitable attention, independent of farm size, housing and milking procedure, it is possible to produce milk with low E. coli counts, and to insure appropriate hygienic conditions.
Further detailed examinations are needed to decide which factors of housing and milking technologies influence the E. coli count of bulk tank milk. -
The effect of water-stress on the mineral nutrition of fruit plantations
187-192Views:137Besides agro-techniques the climatic conditions play an important role in agricultural production. Weather extremes are
significant hazards to many horticultural regions all over the word. It has a profound influence on the growth, development and yields of a
crop, incidence of pests and diseases, water needs and fertilizer requirements in terms of differences in nutrient mobilization due to water
stresses. Nowadays, the weather extremes cause more and more problems and significant hazards to many horticultural regions in Hungary.
The aim of this study is to explore the problems of nutrient uptake followed from climatic anomalies and response it. In this study
we focus on water supply problems (water-stress).
Reviewing the effects and nutrient disorders caused by climatic anomalies, the following statements can be taken:
· Nutrient demand of trees can be supplied only under even worse conditions.
· The most effective weapon against damage of climatic anomalies is preventative action.
· Proper choice of cultivars, species and cultivation should provide further possibilities to avoid and moderate the effects of
climatic anomalies.
· Fruit growing technologies especially nutrition should be corrected and adjusted to the climatic events as modifier factors.
· The role of foliar spraying, mulching and fertigation/irrigation is increasing continuously.
· Urgent task of the near future is to correct and adjust the tested technologies of fruit growing according to these climatic events as
modifier factors.
Optimal nutrient supply of trees decreases the sensitivity for unexpected climatic events. To solve these problems supplementary, foliar
fertilization is recommended, which adjusted to phonological phases of trees. Moreover, mulching is regarded as an excellent water saving
method. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:187In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
The electronic claiming for the Single Area Payment Scheme (eSAPS) in Hungary: the evaluation of a new system
61-68Views:101The agricultural subsidies play a crucial role in the policy of the European Union. Remarkable part of the EU budget is dedicated to agriculture and rural development. The enlargement of the EU, the global changes in the market and other challenges are raising the demand for a better and more efficient way of work in the organization, using information and communication technologies, and especially the implementation of e-government
services. The article presents the Hungarian electronic claiming system (called eSAPS) for European founds in agriculture, and evaluates the first year of its operation. -
Information and Communication Technologies in tourism
49-53Views:173Technological progress and tourism have gone hand in hand for years. Information communication technology (ICT) and tourism are two of the most dynamic motivators of the emerging global economy. Tourism can be considered as one of the most profitable sectors of the Hungarian economy, and in rural areas it is often the only successful economic activity.
Development of ICTs and the expansion of the Internet have changed dramatically in the past few decades. This process is noticeable in
Hungary, as well. Platform of tourism increasingly get to the Internet nowadays, which is vitally important because tourism is an information-intense industry. Therefore, it is critical to understand changes in technologies in order to maintain the crucial role of this sector in the Hungarian economy.
The aim of my study is to support the significance of tourism in Hungary and especially in the North Plain Region with the help of statistical data. Then, I try to show how ICTs appear in this sector and emphasize the role of these tools with some concrete examples. -
Decreasing Energy and Water Use in the Meat Industry
24-28Views:78The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.