Search
Search Results
-
The impact of sowingdate and production area on the yield of white lupin (Lupinus albus L.) on Nyírség brown forest soil
133-137Views:125The lupine is very sensitive to the different ecological conditions. The examinations of lupine was started in 2003 and our aim is determine yield components which directly affecting crop yields (flower, pod and seed number per plants) in different sowing times (3 times, two weeks apart) and growing area area (240, 480, 720 cm2) combinations. According to our results the sowing times, the growing area and the meteorological conditions are influence on yield significantly. Our data suggest that the early sowing and large growing area combination is favourable to rate of fertilized plants and to development of yield. Later sowing reduces the seed yield depending on the cropyear. In our experiment, the decrease of yield was in the unfavourable year (2003) 20–96%, and in the most favourable meteorological conditions (2004) 10–79%, and in rich rainfall year (2005) 15–88%.
-
Interactive evaluation of the main agrotechnical factors in rape production
71-79Views:78Our polifactorial rape research was carried out at Látókép Research Centre of Debreceni Egyetem AMTC, 15 km away from Debrecen. The aim was to study the unique effect and the interactive effect of more factors. The research factors were the following: cultivation, time of sowing and nutrient supply. Soil moisture datas proved unambiguously that increasing amounts of chemical fertilizer raise the water consumption of rape, lack of water in fertilized plots were always bigger then the water deficit in control plots. The highest amount of water deficit was experienced in the case of arable plots. However, increasing amounts of chemical fertilizers raised the amount of yield proportionately. We experienced yield depression only in the case of arable plots at the highest level of chemical fertilization. In polifactorial rape research sowing of 24th August 2007 of 2007/2008 was the most optimal in point of the amount of yield. This is most-significant in the case of loosening tillage and disking tillage plots, while the plots of ploughing lag behind those two in point of average yield. We experienced the biggest differences of yield in the case of different tillage plots of sowing on 24t August 2007. Still not even the plot with the highest average reached the limit of 4 tons, which can be attributed to high rate of lodging and the harvest loss caused by this. The biggest amount of yield was experienced in the case of sowing of 24th August 2007, with the highest level of chemical fertilization at loosening tillage plot (3930 kg/ha). We can observe big differences between the tillage methods; plots of loosening show a much better average yield then plots of disking and ploughing tillage. Considering the first observed crop year we can state that alternative tillage methods do have a future in rape growing of Hungary.
-
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
89-93Views:115The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties.
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed.
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance. In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half, while no significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. -
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:276Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
Study of some physiologic properties of different genotype sweet corn hybrids
105-110Views:96The effect of nutrient-supply (control, N120+PK) and two different genotypes on the physiologic properties of sweet corn has been investigated in the crop-year of 2011 on chernozem soil in the Hajdúság region. The experiments were carried out at the Experimental Station of the University of Debrecen in Debrecen-Látókép. The experiment was sewn in two different sowing times: the 21st April can be considered as an early, while the 19th May as a late sowing time. The two involved hybrids were Jumbo and Enterprise. The applied plant density was 65 000 plants per hectare.
Our aim with this experiment was to study the plant production, just as the main affecting factors of its development and dynamics, like nutrient-supply and genotypes. We aimed to study and analyse the relationships between these factors and plant production. In this study following parameters were measured and calculated: photosynthetic activity, chlorophyll-content (SPAD-value), leaf area index (LAI) and leaf area duration (LAD). Regarding the analysis of photosynthetic activity values no obvious relationship between the measured values and the applied hybrids, just as nutrient-supply has been revealed.
Analysing the SPAD-values it can be stated that the chlorophyll-content of the measured leaves showed an increasing tendency due to the nutrient-supply. The highest values have been measured in the intensive cob development phase of the early sowing time plots.
Regarding the LAI-values we have found significant differences between the fertilizer treatments in both sowing time treatments. In case of the leaf area duration values – that is derived from the LAI values – nutrient-supply has positively affected the duration of the assimilation area. -
Technological development of sustainable maize production and its effect on yield stability
379-388Views:156In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Role of Sowing Time in Maize Production (Review)
36-39Views:67Many authors, both in Hungary and abroad, have reported on experiments carried out to determine the role of sowing time in maize, but the results are often contradictory. This is hardly surprising, since the maize plant exhibits enormous genetic variability and the hybrids created through selection and inbreeding may have very specific requirements as to sowing date. The year effect, too, often complicates the efforts of scientists to provide clear guidance to farmers on the optimal sowing date for each hybrid.
-
Utilization of Okra (Abelmoschus esculentus L. Moench.)
122-125Views:112Okra is warm season crop native to Africa. Presently it is widely grown in the northeastern parts of Brazilia, both northen, and western parts of Africa, southeast Asia, and in the eastern parts of the Mediterraneum. In Hungary it is a rarity. It’s adaptation to Hungary began about 40 years ago.The optimal sowing time under Hungarian climatic conditions is middle of May. The harvests is started – depending on the weather – first, by the middle of July, and picking continues until the first of September.
According to our results, seed soaking, sowing under a perforated foil sheet-covered trench (2 weeks earlier the normal sowing time), and 55-65 g thousand weight seeds are favourable.
The harvest period under Hungarian circumstances is appr. one and half months. -
Yield components of hairy vetch (Vicia villosa Roth.) in different sowing technologies on acidic sandy soil
83-88Views:242Nearly a quarter of the agricultural utilized area of our country is made up of sandy soils. Sandy soils are poor in nutrients, and, therefore, the effectiveness of farming is basically determined by the method of maintaining soil fertility and the fertilization practice.
The hairy vetch called Vicia villosa Roth (Sandy Roth.), also known as a sand pioneer, plays a significant role in the exploitation of sandy soils. Its cultivation was started in Hungary in the late 1800s. It is primarily used as green fodder, most recently as a green manure and as a soil protection plant. The lupine is grown mainly as a supportive plant, which was previously rye, and today it is triticale. The ratio of the two plants to each other and the spatial location of plants depend on the method of sowing.
The aim of our work was to present the yields of some of the grain grown in different sowing methods and some of its crops.
-
The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
105-110Views:159The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.
-
Influence of temperature and variety on seed germination of soybean (Glycine max L. Merr) at different germination times
5-12Views:74Seed germination is an important stage in crop development that affects plant performance, crop yield, and quality. Many factors influence seed germination, and one of the most important factors is temperature. The closer the temperature is to the optimum, the faster germination will occur. Temperature affects seed germination in various plants and varies depending on the variety. Therefore, the effect of temperature on seed germination is necessary to investigate, also for soybean varieties. Soybean is one of the world's most valuable oil-seed crops. Generally, proper seedling establishment and germination of soybean seeds are crucial processes in the survival and growth cycle of the crop. Thus, a study was done to investigate the influence of temperature and variety on soybean seed germination at different times after sowing. The experiment was carried out at the Institute of Agronomy, Hungarian University of Agriculture and Life Sciences (MATE), Crop Production Laboratory. Seeds of two soybean varieties were subjected to three different temperatures: 15, 25, and 35 °C, and two soybean varieties, Martina and Johanna were tested. There were four germination times based on the days after sowing: Days 3, 5, 7, and 9. This experiment was set up with a completely randomized block design and four replications. According to the findings of this study, the Martina variety showed a better germination rate as well as higher vigor and viability than the Johanna variety in the first 12 days after sowing. At temperatures of 15 °C and 25 °C, both varieties achieved comparable percentages of viability, but they were more vigorous at 25 °C due to better total seedling length. Thus, the information gained from this study will indirectly determine and confirm the proper temperature for the initial growth of the Martina and Johanna varieties.
-
The impact of crop year and certain agrotechnical factors on maize yield
13-16Views:113The experiment was set up with eight maize hybrids with different genetic characteristics in 2012. In our study were included hybrids with different length of growing season. We studied the effect of NKP fertilization and plant density on the yield. Comparing to controll treatment it was found that highest yield was at N40+PK treatment. It was three times higher than agro-ecological optimum. Due to the droughty year the effect of plant density it was minimum. The development rate in case of sowing date I. and II. showed an almost identical picture in the scope of the sowing date trial. However, hybrids with excellent adaptability were capable of a yield above average even in this extreme year.
-
Production of corn in Serbia in the light of climate change
305-322Views:191This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent research by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid.
-
The effect of the sowing time on the yield and oil content of sunflower (Helianthus annus L.) in different crop protection models
57-61Views:130The field research was carried out at the experimental farm of the University of Debrecen at Látókép on calcareous chernozem soil in Hungary. We examined the effects of the sowing time and the fungicide treatment on the yield, oil yield and oil content of two different genotypes of sunflower hybrids (NK Ferti, PR64H42) in 2012 and 2013. We applied three different sowing times (early, average, late) and two different treatment levels of fungicides (control =no fungicides applied, double fungicide protection).
During our research, we received better results in 2013 than in 2012. The application of different planting times affected the yield and oil yield production and the oil content as well. The optimal circumstances for yield and oil yield production were provided by late planting in 2012, while by average planting time in 2013. The highest oil yield results were reached by late plating in both years (except for hybrid PR64H42 in the double treated parcels where average plating time turned out to be more effective). The correlation between the plating time, the yield and oil yield production and the oil content was strong in 2012 (r=0.600**, r=0.639**, r=0.590**). On the other side, in 2013, the correlation was medium between the planting time, the yield production and the oil content.
We applied Pearson’s correlation to analyze the effect of the double fungicide treatment on the yield and oil yield production (2012: r=0.498**, r=0.407**). These results were better in 2013 (r=0.603**, r=0.623**), besides, the double fungicide treatment also increased the oil content (r=0.315**).
-
The scientific background of competitive maize production
33-46Views:274The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant density, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.
Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.
Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.
The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.
-
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
47-54Views:123Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies. -
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:156In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
203-210Views:156The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid. -
Investigation of harvest index influencing agrotechnical and botanical factors in hairy vetch (Vicia villosa Roth.)
123-128Views:115The biggest problem of Hungarian crop farming is mass production and the simple crop rotation based on cereals. There was a decrease in sowing area of protein crops which raises crucial issues in crop rotation and land use. Therefore, growing papilionaceous plants, which are now considered to be alternative plants, should be taken under close examination. Hairy vetch (Vicia villosa Roth.) belongs to the family of papilionaceous plants and it can be grown in light weak soils.
In Hungary, hairy vetch was used as green forage at first, but it later became a green manure plant. Nowadays, it is used as a cover crop and its sowing seed has a good export market. In low fertile soils it is able to produce a big amount of green yield (25–40 t ha-1) even in spring while its seed yield could be 0.4–0.5 t ha-1 at farm level. In addition to its morphological characteristics hairy vetch is grown mainly with a supporting plant, i.e. triticale in many cases.
Our purpose was to test the harvest index and its agrotechnical and botanical factors of hairy vetch in different cropping systems.
-
Development of technology elements for growing of perennial sorghum
15-17Views:123Optimal sowing time for perennial sorghum under irrigation is when soil temperature at the depth of sowing reaches up to 10–11 °С, harvesting for the green mass has to be done when panicle is situated on the stem in 10 sm from the flag leaf and hight of cut must be 11 sm.
-
History of origin and development of replacement of plants crop rotations is in world agriculture
53-56Views:120In practice of world agriculture a long ago the known problem of decline of harvests of agricultural cultures at their permanent growing, scientific explanation of this phenomenon became possible only with appearance of natural sciences. At first the declines of harvests bound to the toxic action of root excretions cultures on her repeated sowing, with development of humus theory of feed of plants of diminishing of harvests at the permanent sowing began to explain impoverishment of soil on a humus.
During a few centuries the known farmers development the looks in relation to forming of scientific bases of construction of replacement of plants crop rotations in the world systems of agriculture, set history of their development and improvement. The analysis of influence of possibility of optimal satiation of replacement of plants crop rotations is conducted by agricultural cultures on the level of fertility of soil, water and nourishing modes and their productivity. For the terms of the insufficient moistening a positive action is marked black pair on the improvement of the water mode of soil in crop rotations.
In historiography the problem of introduction and mastering of replacement of plants crop rotations for the decision of scientific and practical tasks of agricultural production is represented in many-sided aspects, worked out and the recommended replacement of plants crop rotations that are base on zonal principle of development of world agriculture that passed the protracted term of test and counted on various specialization of economies. But for today development of scientific and technical progress requires intensification of agricultural production with the use of intensive crop rotations and growing of high-performance cultures.
Hereupon there was a necessity of realization of analysis of the systems of historical value of scientifically-practical knowledge about development and improvement of replacement of plants crop rotations, as it gives an opportunity to work out to recommending a production with the use of the most effective elements of the past on modern agrarian business and allows to forecast them on the future.
-
The importance of millet production in regional production, with special emphasis on climate change
141-146Views:137Regional production is a traditional production structure developed adjusting to the geographical, climatic, biological and soil conditions in given production regions, a certain territorial specification of agricultural production, and a type of farming that best fits the natural conditions and takes the biological needs of plant and animal species into account as fully as possible. The most probable element of risk in plant production is the changeable, extreme weather. That is the reason why the specific characteristics of the place of production and the characteristics of regional production should be considered to a greater extent. The establishment of the range of varieties appropriate for the place of production is the key issue in regional production. One of our historically grown cereal plants that perfectly fits regional production is millet. Due to its short growing season, favourable reproduction ratio and the fact that it is relatively undemanding, it used to be grown in larger quantities in the middle ages. Its good nutritional values made it an important food item, but over time, as a result of industrialisation and technological progress; it has been eclipsed by other cereal crops. In our country it is mainly used to cook porridge, but it is also used in the form of flour and as a base material in the spirit drinks sector. In the recent decades, millet has been applied only in a small area, mostly as a secondary crop in areas that dried out from drainage water in late spring, or as a replacement of extinct sowings due to its late sowing time. Water will be the most significant factor for the future of agriculture, especially considering climate change.My examinations took place in the area of the Institutes for Agricultural Research and Educational Farm of University of Debrecen, in the Research Institute of Nyíregyháza, in a small-plot experiment with four replications in 2016. -
Application of mycorrhizae and rhizobacteria inoculations in the cultivation of processing tomato under water shortage
111-118Views:45The effect of mycorrhizal fungi and plant growth promoting rhizobacteria on some physiological properties, yield and soluble solid content (Brix) of ‘Uno Rosso’ F1 processing tomato was studied under water scarcity. Inoculation was performed with mycorrhizal fungi (M) and rhizobacteria preparation (PH) at sowing (M1, PH1) and sowing + planting (M2, PH2). The treated and untreated plants were grown with regular irrigation (RI = ET100%), with deficit irrigation (DI = ET50%) and without irrigation (I0). In drought, the canopy temperature of plants inoculated with arbuscular mycorrhizal fungi (M1, M2) decreased significantly, however, the decrease was small in those treated with the bacterium (PH1, PH2), while the SPAD value of the leaves of plants treated only with Phylazonit increased significantly. On two occasions, inoculations (M2, PH2) significantly increased the total yield and marketable yield, however, under water deficiency, a higher rate of green yield was detected than untreated plants. In dry year using deficit irrigation, the one-time inoculation (M1, PH1) provided a more favorable Brix value, while the double treatments reduced the Brix. In moderate water scarcity, the use of mycorrhizal inoculation (M2) is preferable, while under weak water stress, the use of rhizobacteria inoculation (PH2) is more favorable.
-
Examination of two artichoke cultivars under single year Hungarian climate conditions
112-115Views:71Based on the results of a previous experiment, we concluded that by choosing a suitable cultivar, it is possible to produce artichoke in a one-year cultivation system in Hungarian weather circumstances. The objective of the present experiment was to investigate the performance of two Californian artichoke cultivars (Green Globe, Imperial Star) under the local conditions. Experiments were conducted in 2002 and 2003, by using four
different sowing and two different planting dates (03.01. and 03.20. – planting 05.07.; 04.24. and 05.06. – planting 06.12.). For both cultivars, 100% of the plants initiated buds. In most of the cases, Imperial Star produced higher total and marketable yields than Green Globe did, while it formed bigger and more uniform buds. Our opinion is that the main reason for this result was that Imperial Star tolerated the dry and warm Hungarian summer much better. Irrespective of the variety by earlier sowing dates higher total yield was achieved. Based on our results, we found that under Hungarian circumstances, both cultivars could produce acceptable total yields. However, the weather circumstances of the given year influenced bud quality, and thus marketable yield, to a great extent. -
The role of the hybrid-specific technological recommendations of maize in precision crop production procedures
297-302Views:87The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturity groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.