Search
Search Results
-
Plant clinic in Nepal: An overview
5-10Views:38Plant clinics play an important role in supporting farmers in growing healthy crops and achieving higher productivity in Nepal. The development and operation of plant clinics in Nepal are assessed in this study through a comprehensive analysis of the institution via literature review and interaction with key stakeholders. The plant clinic approach of the agriculture extension system started in Nepal in 2008, followed up with engagement with CABI and the Government of Nepal. Enhancement of farmers' knowledge and skill, encouraging sustainable farming methods, and ultimately increasing crop yields are the impact of plant clinics. However, there are some challenges faced during the implementation of plant clinics in the existing agricultural extension systems. In Nepal, the plant clinics are primarily operated by agricultural technicians with expertise in plant protection, as well as IPM farmer facilitators and community business facilitators after attending an intensive plant doctor's training. Plant clinics have been integrated into the agricultural extension system by agro-advisory service provider of the government of Nepal. Despite institutionalisation, policy support needs to be strengthened to ensure the sustainability of the different components of the (e.g., data management, validation, monitoring, localised content, etc.) plant clinic in Nepal.
-
The effect of the plant density for the yield of the maize hybrids
50-61Views:96In order to enchance the yield stability of maize, the effect of plant density on yields was studied on a typical meadow soil in Hajdúböszörmény between 2002-2004. In the plant density experiment, we used the method of Béla Győrffy. The plant densities applied therefore 20 to 100 thousand plants/ha by ten thousand scale. The application of fertilizer rates for the maize hibrids in every year were N: 110 P: 90 K: 120 kg/ha. We used a manual soiling-gun in the experiment. In every year we used plant protection techniques against monocotyledonous and dicotyledonous weeds. The harvest was done by hand. The facts were read by variancie analysis and linear regression analysis. The moisture and the temperatures were extreme in 2002, 2003, 2004. We have to mention defficiery of moisture in 2003 which is shown that the hot days number increased. After evaluating our findings we can conclude that most hybrids showed a significant correlation between increased plant density and the volume of yields. On the basis of the experiments we divided the hybrids into four groups: the first group included the hybrids suitable for increased plant density with a wide range of optimal density values; the second group included hybrids, which did not require high plant density, were capable of good individual performance and tended to grow several ears; the third group included flexible corn types, which grew longer ears in favourable years, thus yielded more; and the fourth group included the hybrids, which were sensitive to increased plant density and which showed a narrow range of optimal density values. Finally, plant density determines the yield; we have to consider optimal plant density intervals as well as optimal plant density, and we also have to place a high emphasis on the use of hybrid-specific technologies.
-
Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
101-109Views:96The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested yield was 2.43 t ha-1, which was the highest in the world.
Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR. -
Study of plant production modells with different intensity in winter wheat production
51-60Views:102The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, intensive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
100 mm) were applied in different crop rotation systems.
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was 7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649). -
Study of drought stress correlation on yield and yield components of maize cultivars (Zea mays L.)
67-73Views:187This article was investigated to study the correlation and analysis of drought stress regression on maize cultivars' yield and components. The variance analysis results showed a significant difference between drought stress levels in terms of plant height, total dry weight and number of seeds per row, the total weight of cob, grain yield, harvest index, stem diameter, and cob weight with protective leave. Also, there was a significant difference in ear weight without protective leaves, ear diameter, ear length, plant weight, 100-seed weight, and seed per ear on hybrid treatments. There were statistically significant differences between cultivars in plant height, leaf area, ear diameter, ear length, number of seeds per row, number of seeds per ear, the total weight of cob wood, 100-seed weight, harvest index, plant dry weight. The results of the correlation of traits for the mean levels of drought stress showed a positive and significant correlation between plant yield and plant height, seed per row, ear length and weight of 5 pieces of wood and also with a total weight of cob wood, ear weight with bark showed the highest correlation. There is a significant correlation between leaf area and stem diameter, plant weight, total dry weight at the probability level of 0.05. Correlation coefficients between traits in non-stress conditions showed a positive and significant correlation between grain yield and height, ear length and grain in the row, which was a significant increase compared to stress conditions. The correlation of traits under full stress conditions also showed that the correlation coefficient between cob length trait and positive height was positive and significant. From the study of correlation coefficients between maize traits in non-stress conditions, it can be concluded that the most important components of grain yield are cob length and grain per row. While the correlation coefficients under moisture stress conditions show that the grain trait in the row has a positive and significant correlation with yield, under stress conditions in the cob stage did not show any traits with correlation yield.
-
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
89-93Views:122The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties.
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed.
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance. In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half, while no significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. -
Stand evaluation, crop estimation and yield analysis of winter wheat for the optimization of yields
103-109Views:127The authors have been carrying out stand evaluation, crop estimation and yield analysis in winter wheat since 2012. The sampling areas were assigned at the fields of the Training Farm of the Faculty of Agricultural and Food Sciences of Széchenyi István University Mosonmagyaróvár according to the structure of the cropping system. According to their observations the value of field emergence is always lower than the laboratory germination. The weak emergence is important because the lower plant density cannot be compensated by the increased tillering in spite of having larger plant growth space. It is proven by the fact that they detected strong productive tillering even at 5 and 10 mm plant spacing while there were single-spiked plants at 40-50 mm plant spacing as well. The analysis revealed that the total ear mass and grain mass of wheat plants bearing two or more ears is almost the double than that of the single-spiked plants. It was a further basic experience that the largest ear of ”multiple-spiked” plants is always heavier than the single ear of one-spiked plants. Plants with intense tillering and more ears demonstrate the importance of proper seedbed preparation and drilling and the significance of sowing good quality seeds. These are the factors that determine field germination and emergence, influence the speed and intensity of initial development and by all these factors the sufficient productive tillering. The authors emphasize the use of exact and objective methods at crop estimation, e.g. the relationship between the ear mass and the yield which is in strong correlation whilst ear length and grain mass are not suitable for a precise estimation. The authors conclude that crop estimation and yield analysis must be inevitable tools of modern crop production and will be particularly important in precision agriculture. These tools also qualify the job done by farmers and helps to identify the areas that require special attention.
-
The effect of plant density on the yield of sweet potato
125-128Views:388A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.
-
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
56-61Views:118The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.
-
Applicability of hyperspectral technology for in situ phytoremediation
71-78Views:111The characterization of heavy metal polluted abandoned mining sites is a complicated assignment due to the variable spatial distribution of the pollutants, therefore complex integrated method is required in order to assess precisely the amount and the distribution of the contaminants. The examined area is flotation sludge reservoir of abandoned Pb-Zn mining site with serious heavy metal contamination. located in Gyöngyösoroszi, Northern Hungary.
The hyperspectral image of the flotation sludge is obtained by using a Digital Airborne Imaging Spectrometer DAIS 7915, in the frame of DLR HySens first Hungarian hyperspectral flight campaign (21/08/2002). Parallel to the flight campaign heavy metal content of soil samples were examined from the area of the flotation sludge. The analysis of hyperspectral data was verified by the examination of mine tailing samples by FPXRF (Field Portable X-ray Fluorescence spectrometry) (NITON XL-703).
Determinations of heavy metal containing minerals are based on the spectral profiles of the pixels of the area with using USGIS standard spectral profiles of the examined materials (galena, pyrite, sphalerite, goethite and jarosit).Applying the Spectral Angle Mapper with BandMax classification the distribution of minerals (galena, pyrite, sphalerite, goethite, jarosit) in the area was defined. The mineral formation occurs especially at the levees and the barren places of the Szárazvölgyi flotation sludge reservoir. Based on the statistic results of the samples, principal component analysis and correlation coefficient between the different metal content of the samples were calculated. The highest correlations were found between Pb-Zn, Fe-Zn and between Fe-Pb. This prove the results of the principal component analysis, where usually Pb, Zn, Fe introduce the main component.
Canopy analysis was also carried out with the hyperspectal image in order to classify the differences between vegetation types at the Szárazvölgy flotation sludge reservoir and analyse the applicability of it. Supervised classification methods were used to distinguish 8 vegetation types based on the spectral properties of the area. The results of the classifications were compared to a ground truth image, based on ortophoto, topographic map, and GPS based field data collection. According to results of the comparison, the paralellpiped classification method is proved to be appropriate method based on the overall accuracy of canopy classification, which was 54% due to heterogeneity of the vegetation.
The results of hyperspectral data and FPXRF analysis suggest that Pb, Zn and Fe containing minerals have similar spatial distribution in the examined and barren area.
Based on this study hyperspectral remote sensing is likely to be an effective tool for the characterization and modeling the distribution of Pb, Zn and Fe containing minerals at the examined heavy metal polluted sites. Further more, based on the vegetation analysis plant species for phytoremediation can be defined.
-
The response of sunflower hybrids to different plant densities on a chernozem soil
123-128Views:171In our experiment the reaction of six sunflower hybrids of different genotypes (NK Oktava, ES Biba, ES Diagora, ES Ballistic, EGH 8925, PR 64 H 42) towards plant density has been investigated by different fungicide treatments in the crop-year of 2011 on a chernozem soil.
In the crop-year of 2011 sunflower populations were infected by a significant Diaporthe helianthi disease. The extent of this infection was significantly enhanced by the increment of plant density. However, regarding the average of the hybrids and plant densities the two times executed fungicide treatment has decreased the infection rate by 22%. The most susceptible hybrid was the ES Biba. Contrarily, the hybrid ECH8925 proved to be the most resistant hybrid towards this
disease according to our results. According to the results of the Pearson’s correlation analysis it has been revealed that stalk breakage and Diaporthe infection stand in a very close (r=0.782**) and middle close (r=0.523**) correlation resp. with plant density. The relationship between fungucude treatments and stalk breakage, just as Diaporthe infection showed to be middle and close respectively. Our results demonstrate the role of stalk and plate diseases (among them Diaporthe) in causing stalk breakage, for we have found a close positive correlation between stalk breakage and Diaporthe infection (r=0.624**) in our analysis.
From the aspect of yield amount the optimal plant density varied between 45 000 and 55 000 plants per hectare. Fungucude treatments enabled not only the use of higher plants densities, but they had a yield increasing effect as well. In the crop-year of 2011 the highest yield (4 559 kg ha-1) on a chernozem soil has been measured in case of the hybrid ECH8925. -
Impact of nitrogen and sulphur fertilization on the growth and micronutrient content of spring wheat (Triticum aestivum L.)
211-219Views:175Micronutrients are as important as macronutrients for crops. Each micronutrient has its own function in plant growth. Zinc is important for membrane integrity and phytochrome activities. Copper is an essential micronutrient required for the growth of wheat. Manganese is required for enzyme activation, in electron transport, and in disease resistance. The pot experiment was set up in greenhouse on calcareous chernozem soil Debrecen-Látókép with a spring wheat. In certain development stages (according to BBCH growth scale of wheat), at the beginning of stem elongation (29–30), at the heading (51–59), at the flowering (61–69) stage three average plants were removed from all pots for analysis. Fresh and dry weight of the plant samples were measured. Plant leaves after drying were digested by HNO3-H2O2 methods and manganese, zinc and copper contents of plant were quantified by atomic absorption spectrophotometry. At the flowering stage, when the nutrient uptake of plants is the most intensive, the weight of wheat ranged between 0.94–1.57 g plant-1. In this development stage, the NS2 treatment produced the highest weight of wheat, and compared to this the NS3 treatment decreased that value already. The results show unfavourable effect of NS3 treatment. On the basis of microelement content of wheat and the weight of a plant, nutrient uptake by plant were calculated. At the beginning of growth the starter treatment had positive effect on Cu-uptake compared to the NS1 treatment, where the same dose of fertilizer was stirred into the soil. Wheat is very sensitive to copper deficiency, so copper dissolved by starter treatment could be favourable to the early development of wheat. At flowering stage the Zn-uptake of wheat became the highest and it was between 133.7–234.6 mg plant-1. The Mn-uptake of wheat plant was higher than the Cu- and Zn-uptake of wheat.
This phenomenon can be explained by the fact that the untreated soil had higher Mn-content, than Cu- and Zn-content. To summarize the results, it can be stated, that the copper uptake of wheat was more affected by the different treatments in the stage of stem elongation, while Mn- and Zn-uptake of wheat were influenced primarily in the stage of heading and flowering.
-
Effect of the crop-year on plant protection feature of sunflower
71-75Views:159Our study focused on plant density reactions of sunflower hybrids on chernozem soil in years with different levels of available water (2011 and 2012). We studied factors (i.e.infections, yield) that are most affected by the amount of precipitation.
However the amount of precipitation varied in 2011 (average amount of precipitation) and 2012 (drought), Sclerotinia and Diaporthe infections were significant in both years. Diaporthe was stronger in 2011 while in 2012 Sclerotinia infections were greater than average. Higher plant density provided for a favorable microclimate for pathogens meaning that increased stock density enabled enhanced infections. Maximum levels of infections in both the cases of Diaporthe and Sclerotinia were measured at a plant density level of 65 000 plants ha-1.
2012 yields (control: between 2 289 and 3 261 kg ha-1, two-time treated: between 2 699 and 3 659 kg ha-1) were significantly lower compared to the results of 2011 (control: between 2 825 and 3 672 kg ha-1, two-time treated: between 3 059 and 4 059 kg ha-1). Fungicide treatments led to an increased yield in both years: 9.5% in 2011 and a notable, 15.1% growth in 2012. We applied regression analysis to calculate optimum plant density for the examined years and treatments. Based on the calculations we found that in the cases of both treatments optimum plant density was 53 000 plants ha-1, while in 2012 the optimum was higher due to lower level of infections: 56 000 plants ha-1 in the control stock and 64 000 plants ha-1 in the stock treated twice.
-
Sequence stability at SSR, ISSR and mtDNA loci of common millet (Panicum miliaceum) from the middle ages
10-19Views:95Seed remains of medieval millet, recovered from a 15th century layer (King’s Palace, Budapest, Hungary), showed reddish yellow grain color after rehydrating on tissue culture medium that was close to grain color of modern cultivar Omszkoje. aDNA of medieval c. millet was extracted successfully, analyzed and compared to modern common millets by ISSR, SSR, CAPS and mtDNA. Analyses of fragments and sequences revealed
polymorphism at seven ISSR loci (22 alleles) and at the 5S-18S rDNA locus of mtDNA. CAPS analysis of the 5S-18S rDNA fragment revealed no SNPs in the restriction sites of six endonucleases TaqI, BsuRI, HinfI, MboI, AluI and RsaI. Sequence alignments of the restriction fragments RsaI also revealed
consensus sequence in the medieval sample compared to a modern variety. Morphological characterization of twenty common millet (Panicum miliaceum L., 2n=4×=36) cultivars and landraces revealed four distinct clusters which were apparently consistent with the grain colors of black, black and brown, red, yellow, and white. In the comparative AFLP, SSR and mtDNA analysis modern millet cv. ‘Topáz’ was used. AFLP analysis revealed that extensive DNA degradation had occurred in the 4th CENT. ancient millet resulting in only 2 (1.2%) AFLP fragments (98.8% degradation),
compared to the 15th CENT. medieval millet with 158 (40%) fragments (60% degradation) and modern millet cv. ‘Topáz’ with 264 fragments (100%). Eight AFLP fragments were sequenced after reamplification and cloning. Microsatellite (SSR) analysis at the nuclear gln4, sh1, rps28 and rps15 loci of the medieval DNA revealed one SNP (single nucleotide polymorphism) at the 29th position (A to G) of rps28 locus compared to modern millet.
Mitochondrial (mtDNA) fragment (MboI) amplified at the 5S-18S-rDNA locus in the medieval millet showed no molecular changes compared to modern millet. The results underline the significance of survived aDNA extraction and analysis of excavated seeds for comparative analysis and molecular reconstruction of ancient and extinct plant genotypes. An attempted phenotype reconstruction indicated that medieval common millet showed the closest morphological similarity to modern millet cultivar Omszkoje. -
Using crop analysis in the precision nutrient supply system of maize
183-186Views:90The effect of the N, P and K supplies of soil on the grain yield and N, P and K status of maize was studied in a long-term mineral fertilisation experiment between 2001 and 2008 and nutrient supply limit values were determined to plant analysis. Based on the interaction between the N concentrtion of maize leaves measured at the beginnig of tasseling and grain yield, the satisfactory limit value of N supply to reach 10–14 t ha-1 yield was between 2.0–4.0%. Leaf analysis at the beginning of tasselling indicated that better P and K supplies were associated with a higher P and K concentration in the maize leaves. Correlation analysis on the P concentration of the maize leaves and the grain yield showed that at a grain yield level of 10–14 t ha-1 a P concentration of 0.20–0.37% represented a satisfactory P supply level. The satisfactory K supply limit value to reach 10–14
t ha-1 grain yield was 1.5–2.6%. -
Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
32-37Views:89Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area located in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.
-
Using sensors in precision crop production
267-270Views:127Proper plant nutrition that takes into consideration both the requirements of plants and ecological conditions is one of the most important precondition of successful plant production. An important element of the N-fertilization of wheat is that the optimum zone of nitrogen supply is significantly narrower than that of other plant species, therefore it can easily happen that we apply higher or lower nitrogen doses than the optimal one. A possible solution to this problem can be precision agriculture. Applying the methods of precision agriculture we can take into consideration the heterogeneity of fields. By applying precision methods either online or offline we can intervene faster than if we would rely only on regular soil and plant analysis procedures. The determination of the doses of nitrogen and the timing of application are influenced also environmental and
economic aspects. The chlorophyll content of the leaves indicates the nitrogen status of plants, since there is a relationship between the nitrogen content and the amount of chlorophyll in the leaves. According to plant analysis results there was a strong and significant relationship between the values of the NDVI (Normalized Difference Vegetation Index)and the total nitrogen content measured in the leaves. -
Studies on the Fusarium stalk rot infection of the maize genotypes using the Findex percentage and a computerised image analysis program
45-51Views:104In a continental climate, the pathogens causing the most serious problems are species belonging to the Fusarium genus. When the pathogen attacks the stalk, the plant dies earlier, reducing grain filling and resulting in small, light ears. In addition, the stalks break or lodge, resulting in further yield losses from ears that cannot be harvested. During the three years of the experiment, 14 inbred lines were examined. The genotypes were sown in a two-factor split-plot design with four replications, with the genotypes in the main plots and four treatments in the subplots: two Fusarium graminearum isolates (1. FG36, 2. FGH4), 3. sterile kernels, 4. untreated control. The results experiments showed significant differences between the genotypes for resistance to fusarium stalk rot. Among the inbred lines the best resistance to fusarium stalk rot was exhibited by P06 and P07, both of which were related to ISSS. The precision and sensitivity of disease evaluations carried out visually and using image analysis software were compared in the experiment, and with two exceptions the CV values were lower for the image analysis. As the CV for measurements can be considered as a relative error, it can be stated that image analysis is the more precise of the two methods, so this technique gives a more accurate picture of the extent of stalk rot. The extent of stalk rot developing in response to natural infection is extremely environment-dependent, so the use of artificial inoculation is recommended for selection trials.
-
Assessment of Environmental Susceptibility/Vulnerability of Soils
62-74Views:90Soils represent a considerable part of the natural resources of Hungary. Consequently, rational land use and proper soil management – to guarantee normal soil functions – are important elements of sustainable (agricultural) development, having special importance both in the national economy and in environment protection.
The main soil functions in the biosphere are as follows: conditionally renewable natural resource; reactor, transformer and integrator of the combined influences of other natural resources (solar radiation, atmosphere, surface and subsurface waters, biological resources), place of „sphere-interactions”; medium for biomass production, primary food-source of the biosphere; storage of heat, water and plant nutrients; natural filter and detoxication system, which may prevent the deeper geological formations and the subsurface waters from various pollutants; high capacity buffer medium, which may prevent or moderate the unfavourable consequences of various environmental stresses; significant gene-reservoir, an important element of biodiversity.
Society utilizes these functions in different ways (rate, method, efficiency) throughout history, depending on the given natural conditions and socio-economic circumstances. In many cases the character of the particular functions was not properly taken into consideration during the utilization of soil resources, and the misguided management resulted in their over-exploitation, decreasing efficiency of one or more soil functions, and – over a certain limit – serious environmental deterioration.
Soil resources are threatened by the following environmental stresses:
– soil degradation processes;
– extreme moisture regime;
– nutrient stresses (deficiency or toxicity);
– environmental pollution.
Environmental stresses caused by natural factors or human activities represent an increasing ecological threat to the biosphere, as well as a socio-economic risk for sustainable development, including rational land use and soil management.
The stresses are caused by the integrated impacts of various soil properties, which are the results of soil processes (mass and energy regimes, abiotic and biotic transport and transformation and their interactions) under the combined influences of soil forming factors. Consequently, the control of soil processes is a great challenge and the main task of soil science and soil management in sustainable development.
The efficient control of these processes necessitates the following consecutive steps:
• registration of facts and consequences (information on land and soil characteristics, land use, cropping pattern, applied agrotechnics, yields, with their spatial and temporal variability);
• evaluation of potential reasons (definition and quantification of soil processes, analysis of influencing factors and their mechanisms);
• assessment of the theoretical, real, rational and economic possibilities for the control of soil processes (including their risk-assessment and impact analysis);
• elaboration of efficient technologies for the „best” control alternatives (best management practice).
Scientifically based planning and implementation of sustainable land use and rational soil management to ensure desirable soil functions, without any undesirable environmental side-effects, require adequate soil information. In the last years such data were organized into a computer-based GIS soil database in Hungary, giving opportunities for the quantification, analysis, modelling and forecasting of the studied environmental stresses and for the efficient and scientifically based prevention, elimination or reduction of environmental stresses and their unfavourable ecological and economical consequences.
Special attention was paid to the assessment of various soil degradation processes, as: (1) soil erosion by water or wind; (2) soil acidification; (3) salinization and/or alkalization; (4) physical degradation (structure destruction, compaction); (5) extreme moisture regime: drought sensitivity and waterlogging hazard; (6) biological degradation; (7) unfavourable changes in the plant nutrient regime; (8) decrease of natural buffering capacity, (9) soil (and water) pollution.
The actions against undesirable environmental stresses and their unfavourable consequences are important elements of sustainable, efficient, economically viable, socially acceptable and environmentally sound crop production and agricultural development. These are joint tasks of the state, decision makers on various levels, the land owners, the land users and – to a certain extent – of each member of the society. -
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
399-410Views:369Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea. Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark (www.biocat-project.com). Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.
The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.
The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.
-
Comparison of growth parameters of 40 varieties/clones short rotation coppice willow (Salix)
99-104Views:127The plantation of willow varieties was established in 2009. The 40 different varieties and clones of Salix were planted at a research field in Kolíňany (Nitra district). The paper evaluates results from the first growing season in 2009. The survival rate of planted cuttings ranged from 55.56 % to 100.00 % after the first year. The lowest survival rate was reached by Terra Nova variety. The stem numbers per plant ranged from 1.17 ±0.37 to 2.53 ±0.98. The average height of one-year old stem varied from 65.82 ±36.60 cm to 225.58 ±68.61 cm. The average stem diameter ranged from 6.90 ±2.63 mm to 14.34 ±3.39 mm. There were statistically very significant differences in parameters of stem height stem diameter and stem numbers per plant among studied varieties/clones. The statistic method used was analysis of variance ANOVA. The varieties were then divided into 6 groups according to their similarity in observed parameters after the first growing season by cluster analysis. The best results were reached by varieties/clones classified in the second group. The survival rate, stem diameter and stem height values of these varieties/clones were above average.
-
The impact of applying foliar fertilizers on the health condition of maize
105-109Views:171The nutrient supply of plants is becoming more important in plant protection since the appropriate condition of plants can be ensured by optimal and satisfactory nutrient supply to avoid nutritional deficiency diseases. Due to the extreme weather conditions, plants are forced to face several stress factors, which leads to deterioration of the plant health. The increasing occurrence of droughts poses threat to nutrient uptake through the roots since all the nutrients can be accessible to the plants only if they are in dissolved form in the soil – which is not possible in the absence of water. Therefore, the importance of foliar fertilizer is becoming a more and more significant part of the nutrient supply, because with the help of this technology the development of any nutrient deficiency can be prevented.
In this experiment, we focused on the efficiency of two different foliar fertilizers on maize. Foliar fertilizers were applied two times, once in the stage with 8 leaves and tasseling phenophase of the maize. To verify the efficiency of the foliar fertilizers, the chlorophyll content of untreated and treated plant’s leaves was measured after each application. Moreover, the length and diameter of maize cobs, thousand kernel weight, protein, oil and starch content were also measured, and the results were compared to the untreated (control) ones. According to the results, in all aspects significant differences were observed and due to the laboratory analysis of leaves, in the case of magnesium and zinc supply the foliar fertilizers were able to prevent the development of nutrient deficiency.
-
The application of bentonite and zeolite for soil amelioration in acidic sandy soil
131-137Views:108In a pot experiment, we have studied the effect of bentonite and zeolite in different dosages [control; 5; 10; 15; 20 g kg-1] on acidic (pHH2O=5.65) humus sandy soil. The experiment was set up in 2007 and 2008 in the greenhouse of the UD CASE Department of Agrochemistry and Soil Science. As a test plant, perennial ryegrass (Lolium perenne L.) was used.
In laboratory examinations, pH(H2O), pH(KCl), hidrolytic acidity, nitrate-N content, readily available phosphorus and potassium content were determined. Among soil microbial parameters, the total number of bacteria, the cellulose-decomposing bacteria, the carbon-dioxide production, the microbial biomass-C content of soil, and the saccharase enzyme activity were measured. In the experiment the biomass of the test plant was determined.
The effect of bentonite and zeolite in different dosages can be summarized as follows:
− The pH increased under the effect of low dosages. With the increasing of the pH the hydrolytic acidity - at the bentonite treatments significantly – decreased.
− Regarding the readily available nutrient content of the soil, low and medium dosages proved to be effective. High dosages of bentonite treatments reduced the nitrate-N content, the readily available phosphorus, and potassium content of soil, by zeolite treatments the high dosages reduced the nitrate-N content of soil.
− Regarding the measured soil microbial parameters in both treatments low and medium dosages proved to be also effective, but the high dosages didn’t cause decreasing at the total number of bacteria, and by zeolite treatments the biomass-C content of soil.
− Also the bentonite and zeolite treatments enlarged the biomass of the test plant. We experienced significant increasing by bentonite treatments by the effect of medium and high dosages, while in zeolite treatments only the high dosage caused significantly increasing in plant biomass. The largest dosages decrease the plant biomass.
− Under the statistical analysis we found many medium and tight correlation between the studied parameters. -
Economic Assessment of Biodiesel Production for Hungarian Farmers
72-76Views:77Utilisation of oil of plant origin as a fuel is gaining acceptance in the European Union and elsewhere. Besides environmental protection, energy saving, and decreasing over-production of food. Additionally, the subsidisation of farmers and the development of rural sub-regions also contribute to its spread. This study specifically focuses on the direct effects biodiesel's raw materials and final products are now having on farmers, while reviewing and quantifying these effects. I have purposely restricted my analysis to these two elements of the biodiesel chain.
The biodiesel chain seems to be a great method for improving the economic and social position of participant farmers in many ways. Presently, the profitability of raw materials’ production looks to be the crucal point in the chain, and could be strengthened best with intensive, habitat-specific agrotechnic. It would only be possible to reach a favourable profit margin for farmers if yields reach unrealistic averages or if there is a significant hike of the 2000 producer’s price in the oil plant branch.
The main attraction of sunflower- and oilseed rape production lies in the stabilization of market conditions, which is not only gong to appear in oil plant branch but – thanks to the reduction of outputs – also in the cereal branches. Better economic safety for farmers may play a role at least on the same level as in plant production, which involves more risks than profit maximalization.
The reduction of the prime cost of biodiesel could be possible through the direct combustion of the whole oilseed plant or its residues or electricity production using them. Whereas energy demand for biodiesel production is low (appr. 5%) but it needs subsidization and the prices of natural gas and electrical energy presently look favourable in Hungary. Additionally harvesting and baling of the residues is technically problematic, which is why their use may seem to be reasonable just over the middle or long term. Another possible factor of cost reduction could be the centralization of some partial operations, which needs serious financial resources to reduce amortization cost per product, provided there be several biodiesel projects near each other during establishment. Creation and operation of a logistical system could also be a good method for improving the viability of the biodiesel chain, in order to optimize transport schedule and distances. However there are also some organizational difficulties in this case. -
Interaction of yield stability and year in major agricultural crops
41-46Views:92The effect of hydro-meteorological extremities on plant cultivation is the result of the correlation of many factors. These may increase or decrease the effects of hydro-meteorological extremes. The degree of this variance depends on the professionality of treatments, on the quality of the applied technique and technology and also on the soil’s water management characteristics.
The water management characteristics of Hungary’s arable land are mainly unfavorable or medium. In the past two decades the conditions of originally good soils, from a water management aspect, have significantly deteriorated in the critical 0-60 cm soil layer. This is mainly due to unprofessional land use, a lack of deepening cultivation and neglected organic cultivation. At the same time, hydro-meteorological extremities occur more frequently and the sensibility of plant cultivation has increased.
The sensibility of plant cultivation is type and location specific, yet, it also effects both the quality and quantity of the result.
The stability analysis, which covered the period of four decades and incorporated 6-7 agro-ecological areas proves and highlights the following:
• Winter wheat only reacted to extensive cultivation and unfavorable environmental conditions to a small degree. On the other hand, the effect of hydro-meteorological extremities increases.
• The stability analysis of maize, which is sensitive to cultivation technology and the location of cultivation, proved just the opposite. Good soil and adequate technology significantly reduces the effect of any particular year.
• From the years examined, the most favorable proved to be the one with average precipitation. Maize reacted to both extremities in a similar way. Winter wheat reacted to more precipitation with less yield.
• The yield quality of winter wheat was negatively effected by drought. The negative effect of precipitation is limited to the period of ripening and harvest, so the likelihood of such an effect is not significant.
• The yield of sunflower – due to pests – significantly reduces in years with high precipitation, while a difference between dry and average years cannot be pinpointed out. The oil content in both dry years and in years with high precipitation is evident, compared to years with average precipitation.
• The root yield of sugar beet is reduced by drought while the sugar content depends on soil characteristics and climatic extremities. A difference could also be noted by location, whether in Western Hungary and on the Great Plain. Great sugar content can be achieved in years with high precipitation in Western Hungary, while the same result occurred with average precipitation on the Great Plain. Drought did not have a positive effect on sugar content in either location.