Search
Search Results
-
Effect of tillage practices, fertilizer treatments and crop rotation on yield of maize (Zea mays L.) hybrids
43-48Views:201This research was conducted at the University of Debrecen Látókép Research Station and is part of an ongoing long-term polyfactorial experiment. The impact of three tillage systems (Mouldboard plowing-MT, Strip tillage-ST, Ripper tillage-RT) and two levels of fertilizer treatments (N80 kg ha-1, N160 kg ha-1) along with a control (N0 kg ha-1) on the yield of maize hybrids (Armagnac- FAO 490 & Loupiac-FAO 380) cultivated in rotation with winter wheat was evaluated during a two-year period (2017–2018).
Amongst the three tillage treatments evaluated, ripper tillage (RT) had the highest average yield (10.14 t ha-1) followed by mouldboard tillage (MT) and strip tillage (ST) with 9.84 and 9.21 t ha-1 respectively. Yield difference between RT and MT was not significant (P>0.05), as compared to ST (P<0.05). Soil moisture content varied significantly with tillage practices and was highest in ST, followed by RT and MT (ST>RT>MT). Yield of RT was 7–9% higher than MT in monoculture plots, while MT reign superior in biculture plots (monoculture: RT>MT>ST; biculture: MT>RT>ST).
A positive interaction between tillage and fertilization was observed, with higher yield variation (CV=40.70) in the non-fertilized (N0) plots, compared to those which received the N80 (CV=19.50) and N160 kg ha-1 (CV=11.59) treatments.
Incremental yield gain from increase fertilizer dosages was significantly higher in monoculture, compared to biculture. There was no significant difference in yield between N160 and N80 in the biculture plots (12.29 vs 12.02 t ha-1). However, in monoculture plots, N160 yield was 23% higher than the N80 kg ha-1 (N160=11.74 vs N80=9.56 t ha-1).
Mean yield of maize in rotation with winter wheat was 28% (2.47 tons) higher than monoculture maize. The greatest benefit of crop rotation was observed in the control plots (N0) with an incremental yield gain of 4.39 tons ha-1 over monculture maize (9.92 vs 5.43 t ha-1).
Yield increased with higher fertilizer dosages in irrigated plots. Fertilizer application greatly increased the yield of maize and accounted for 48.9% of yield variances. The highest yield (11.92 t ha-1) was obtained with N160 kg ha-1 treatment, followed by N80 kg ha-1 (10.38 t ha-1) and N0 kg ha-1 (6.89 t ha-1) respectively.
Overall mean yield difference between the two hybrids was not statistically significant, however, yield of FAO 380 was 3.9% higher (9.06 vs. 8.72 t ha-1) than FAO 490 in monoculture plots, while in biculture plots, FAO 490 was 4.1% higher than FAO 380.
Average yield in 2018 was 13.6% (1.24 t ha-1) higher than 2017 for the same set of agrotechnical inputs, thus, highlighting the significant effect of cropyear.
Armagnac (FAO 490) cultivated in rotation with winter wheat, under ripper tillage and N80 kg ha-1 is the best combination of treatments for optimum yield.
-
The relationship between the nutrient supply and the yield of maize hybrids with different genetic traits on chernozem soil in variant years
27-31Views:210The experiments were set on lime-coated chernozem soil in 2013 and in 2014, in our study four hybrids were included with different FAO number. We studied the effect of NPK fertilization and row spacing on the yield. The fertilizer doses were based on a 25-year longterm experiment. Compared to control, the N40 +PK treatment has also achieved a significant yield increase, although some hybrids responsed with yield loss to the increasing fertilizer doses; this effect was observed especially in 2014. The majority of hybrids reached higher yields in both years using the 50 cm row spacing. The water release of hybrids was measured weekly during the maturation, at the same time points. The rainy September slowed ripening and the water release of the hybrids in 2013, so the grain wet content at harvest showed higher values. The moisture contents were increased for some hybrids, in spite of the positive and favorable dynamic of water loss.
-
The effect of the plant density for the yield of the maize hybrids
50-61Views:111In order to enchance the yield stability of maize, the effect of plant density on yields was studied on a typical meadow soil in Hajdúböszörmény between 2002-2004. In the plant density experiment, we used the method of Béla Győrffy. The plant densities applied therefore 20 to 100 thousand plants/ha by ten thousand scale. The application of fertilizer rates for the maize hibrids in every year were N: 110 P: 90 K: 120 kg/ha. We used a manual soiling-gun in the experiment. In every year we used plant protection techniques against monocotyledonous and dicotyledonous weeds. The harvest was done by hand. The facts were read by variancie analysis and linear regression analysis. The moisture and the temperatures were extreme in 2002, 2003, 2004. We have to mention defficiery of moisture in 2003 which is shown that the hot days number increased. After evaluating our findings we can conclude that most hybrids showed a significant correlation between increased plant density and the volume of yields. On the basis of the experiments we divided the hybrids into four groups: the first group included the hybrids suitable for increased plant density with a wide range of optimal density values; the second group included hybrids, which did not require high plant density, were capable of good individual performance and tended to grow several ears; the third group included flexible corn types, which grew longer ears in favourable years, thus yielded more; and the fourth group included the hybrids, which were sensitive to increased plant density and which showed a narrow range of optimal density values. Finally, plant density determines the yield; we have to consider optimal plant density intervals as well as optimal plant density, and we also have to place a high emphasis on the use of hybrid-specific technologies.
-
Effect of NPK fertilization on the yield and yield stability of different maize genotypes
101-104Views:151The yielding capacity and quality parameters of 11 maize hybrids were studied in 2011 on calcareous chernozem soil in a 25-year long-term fertilization experiment in the control (without fertilization), in the base treatment of N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 and in five treatments which were the multiplied doses of the base treatment. The N fertilizer was applied in the autumn and in the spring, while P and K fertilizers were applied in the autumn.The sowing time was 17–18 April, the time of harvest was 8 October. The 30-year average of precipitation (April–Sept) was 345.1 mm, the amount of precipitation did not differ greatly from that, however, its distribution was very unfavourable.
It was found that the largest yield increment (as compared to the control) was in the treatment N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 in the long-term experiment. The largest yields were obtained for the hybrids P9494, PR37N01 and PR35F38 (13.64–13.71 t ha-1). Due to the dry period at the end of the summer – beginning of autumn, the grain moisture content at harvest was favourably low, 12–18% depending on the treatment and the growing season.The N fertilization significantly increased the protein content of the kernel, but the starch content of the kernel decreased (significantly in several cases) with increasing fertilizer doses and yields as compared with the control.
The highest protein content was measured in hybrids GK Boglár and Szegedi 386. The oil content was above 4% for GK Boglár, but the two hybrids were not among the best yielding hybrids in spite of their good inner content. The starch content was around 75 % without fertilization, it decreased with fertilization.
For the tested hybrids, the fertilizer dose N 120 kg ha-1, P2O5 75 kg ha-1, K2O 90 kg ha-1 can be recommended with respect to efficacy and environmental considerations. -
Evaluation of decreasing moisture content of different maize genotypes
147-151Views:293An experiment was conducted to evaluate the decrease in grain moisture content in three maize hybrids in Debrecen in 2017. Armagnac, Sushi and Loupiac were the examined hybrids in this study. The culture medium and temperature conditions were applied uniformly for all three hybrids. According to the results obtained from the ratio of moisture content of seeds per day, the Armagnac variety in the intensive drying down phase loses more time and moisture content, so it can be concluded that the produced dry matter is more than in the case of other varieties. Armagnac requires more time to achieve yield, while the Sushi and Loupiac hybrids produce less harvest. Regarding the slope of the regression line, the rate of loss of moisture in the grain has been negatively correlated with the amount of “b” in the three examined hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97% in the Loupiac, 95% and in the Sushi 90% of the total dynamic value of moisture motion.
-
The effect of crop year and agrotechnical factors on the yield of various maturity groups of Limagrain maize hybirds
19-23Views:156The Limagrain maize hybrids in different maturity groups were examined at the Látókép Experimental Station of the Centre of Agricultural Sciences and Engineering, University of Debrecen on a calcareous chernozem soil with loam texture, between 2001 and 2007 in a multifactorial long-term field trial. Doses of fertilizers: 1 N:0.75 P2O5:0.88 K2O fixed proportion of NPK doses. The basic dose of nitrogen is 30 kg ha-1. The application of fertilization was 1, 2, 3, 4, and 5 times more than the basic dose, beside of untreated control. The long-term field trial is performed in none irrigated and in irrigated version.
The goal of the study was to analyze the effect of precipitation (environment factor) in one hand, and to evaluate the effect of fertilization and irrigation (agrotechnical factors) on the yield of maize hybrids in different maturity groups in the other hand. At the same time I studied the effect of interaction of different factors on the yield of maize.Analysis the yield of Limagrain hybrids revealed: the years considerably affected the level of the yield. In dry years the yield was 1.351 t ha-1 less, than in rainy years. As the effect of fertilization the yield increased, the statistically proved biggest increment was at level of 90 kg N ha-1. Evaluating the maturity groups, FAO 300 hybrids reached higher level of yield.
In non irrigated conditions in the average of the seven years 60 kg N ha-1 was sufficient to reach the maximum yield. The efficiency of fertilization on yield in irrigated version increased, 120 kg N ha-1 assured the reliable level of yield.
Without irrigation in comparison to the results of FAO 200 group, with the growth of FAO numbers the yield is increasing in all cases. The most significant increase was at FAO 300 (3.562 t ha-1). With irrigation the greatest difference in yield was in FAO 400 (+2.720 t ha-1) compared to FAO 200. -
Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
35-41Views:405The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.
The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.
The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.
The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.
Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.
-
Examination of the chlorophyll content of maize hybrids of different maturity groups at different N fertiliser doses
159-162Views:131Nitrogen fertilisation is a critical point of maize production. Five hybrids of different maturity dates were examined in a field experiment, three treatments (different application dates) and three basic fertiliser doses (0, 60, 120 kg ha-1 N) were used. At the 6-leaf-stage of maize, each fertilisation level of the 2nd and 3rd treatment was given 30 kg N ha-1 fertiliser active ingredient in addition to the basic fertiliser doses with the exception of the control plots and further 30 kg N ha-1 fertiliser was applied at the 12-leaf-stage. The final fertiliser doses were 0, 90 and 150 kg N ha-1 in the second treatment and 0, 120 and 180 kg N ha-1 in the 3rd treatment. The whole amount of the basic fertiliser (ammonium nitrate) was applied in the spring, one month before sowing.
The relative chlorophyll content of the maize leaves was measured, with a Minolta SPAD-502 measurement device. The measurements were carried out at the 6-leaf growth stage (V6) of maize on the youngest fully developed leaf of the 6th, 7th and 8th plants from the second row of each plot.
There were significant differences in the SPAD-readings measured at the V6 phenophase of maize between the hybrids (p<0.001) and the fertiliser treatments (p<0.05). The regression analysis did not show any correlation between the SPAD-values and fertilisation.
The highest significant SPAD-reading and yield were obtained by applying 120 kg ha-1 N. As a result of the regression analysis performed on yield, it can be concluded that the correlation between fertilisation and yield in the 1st and 2nd treatment was moderately close (r=0.439, r=0.480) and it was close in the 3rd treatment (r=0.513). The correlation between the SPAD-readings and yield was the closes in the 2nd treatment (r=0.639), while the SPAD-value had a 40.9% influence on yield (p<0.001).
-
Study on the cold tolerance of maize (Zea mays L.) inbred lines in Phytotron
41-45Views:109Maize has come a long way from the tropics to the temperate zone. In the beginning, the spreading of maize was prevented by its sensitivity to cold. Improved cold tolerance at germination is one of the most important conditions for early sowing. The advantage of cold tolerant hybrids is that they can be sown earlier, allowing longer growing seasons and higher yields, due to the fact that the most sensitive period in terms of water requirements, flowering, takes place earlier, i.e. before the onset of summer drought and heat.
In Martonvásár, continuous research is carried out to improve the cold tolerance of maize. In the present experiment, the cold tolerance of 30 genetically different maize inbred lines was investigated in a Phytotron climate chamber (PGV-36). The aim of our research is to identify cold tolerant lines that can be used as parental components to produce proper cold tolerant hybrids and/or as sources of starting materials for new cold tolerant inbred lines. After observing and evaluating changes in phenological traits under cold-test, the results of the cold-tolerance traits of interest have been used to highlight several inbred lines that could be good starting materials for further research on genetic selection for cold tolerance.
-
Changes in the Macro-, Mezo-, and Microelement Contents of Maize Hybrids in Relation to the Level of Nutrient Supply
126-130Views:76n my research, I measured the effect of NPK fertilisation on the macro- meso- and microelements content of maize hybrids in 2001. The experiment was set in the demonstration garden of the Department of Crop Production and Applied Ecology in the Agricultural Centre, at the University in Debrecen. The soil of the experiment is calcerous chernozem soil. Five fertilisation steps were applied. Besides the control the smallest rate was 40 kg N; 25 kg P2O5; 30 kg K2O of active ingredients. The largest rate was five times more than the smallest one: 200 kg N; 125 kg P2O5; 150 kg K2O, which is equal to 475 kg mixed active ingredients. The NPK treatment significantly influenced the macrolement content in several cases. The N content was the lowest in the control treatment. Compared to this the fertiliser treatments significantly increased the N content of hybrids. However the highest amounts of potassium and phosphorus could be measured in the control and the lowest amounts could be measured at the N 200+PK kg/ha treatment.
The Ca content of hybrids was the highest in the N 120+PK kg/ha treatment, while their Mg and Zn content was the highest in the control treatment. The lowest amounts were weighed in the N 200+PK kg/ha treatments, that in several cases resulted in statistically proved decreasement compared to the control or the lower fertilizer doses. Considering the two mesoelements and Zn the most favourable results were obtained in the case of the Norma SC and DK 366 SC hybrids.
Summing up what has been said moderate amounts of fertiliser doses (N 40-120+PK kg/ha) had a favourable influence on the micro- and macroelement content of hybrids. -
Effect of season and sowing time on the moisture loss dynamics and yield of maize
255-265Views:213The effect of sowing date on maize development and yield was studied in field experiments. The experiment was set up at the experimental garden of the University of Debrecen Centre of Agricultural Sciences Faculty of Agriculture, Department of Plant Sciences in 2005 and 2006 on calcareous chernozem soil. Six hybrids with different genetic characteristics and vegetation period were tested (Sze 269, DK 440, PR37D25, NK Cisko, Mv Maraton, PR34B97) at three different sowing dates.
2005 was a very wet year. The amount of precipitation in the vegetation period was about 150 mm higher than the average of 30 years. No significant differences were observed in temperature. However, the number of sunny hours was much lower during the summer than as usual. This had an influence on yields.
In 2006, there was no risk of inland water in spite of the large amount of precipitation at the beginning of the year. The amount of water available for plants was satisfactory during the season due to the favorable amount of precipitation. Therefore, plants suffered less from the heat in July. However, hail on 22 July caused significant damage. The number of sunny hours in the summer was high enough. The warm, dry autumn helped the water release of plants.
In 2005, the results of the third sowing date could not be evaluated due to the large number of missing plants. The yield of hybrids ranged between 12-14 t/ha for the first sowing date. For the second sowing date, yields ranged between wider boundaries. The hybrid PR37D25 has a very high yield in the case of the second sowing date, and its seed moisture content was favorably low. The yield of hybrid PR34B97 was the lowest at the later sowing date, the prime reason of this was damage caused by Diabrotica virgifera. The seed moisture content at harvest varied between 16-24% for the first sowing date. In the case of the second sowing date, higher values were measured. Hybrids Sze 269 and NK Cisko had favorable water release characteristics. The maximum value of leaf area index was the best in the case of the first sowing date (5-5.5 m2/m2).
In 2006, yields for the first sowing date ranged between 8-10 t/ha. At the second sowing date, more favorable results were obtained. The reason for this is probably that hail caused a higher damage in hybrids with the early sowing date. Plant stock with later sowing date could recover more successfully. Hybrid PR37D25 had very high yields for the second and third sowing dates. The high-yielding hybrid PR34B97 also had high yield, but this was accompanied by higher seed moisture content. Due to the warm, sunny autumn weather, the hybrids had good water-release dynamics and were harvested with a lower seed moisture content than in the previous year. For the first sowing date, the seed moisture content was around 13-14% except for hybrid PR34B97. For the second and third sowing dates, higher values were observed. Leaf area index was significantly reduced in August for all three hybrids due to the hail in July. For the first two sowing dates, the leaves of hybrid Sze 269 were the first to dry similarly to the previous year.
Year had a strong effect on the results in both years. -
Examination of the impact of ecological and agrotechnical factors in a maize fertilisation experiment
13-17Views:122The year 2013 was rather extreme breeding year because of the uneven distribution of precipitaion and the summer heat. The experiment was set on with eight different genetic characteristics maize hybrids in 2013. In our study were included different kind of breeding season hybrids. We studied the effect of NKP fertilization and row spacing on the yield. The fertilizer doses are based on 25-year long-term experiment. Compared to control, the N40+PK treatment has also achieved a significant yield increase, although some hybrid of increasing fertilizer doses yield response to loss. The majority of hybrids reached higher yields using the 50 cm row spacing. The water release of hybrids was measured between 21th August and 17th September weekly, at the same time points. The rainy September slowed ripening hybrids and water release, so the grain wet content at harvest showed higher values.
-
The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
203-210Views:201The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid. -
Sensitivity of maize hybrids to common smut under field artificial inoculation conditions
25-28Views:228Common smut disease of maize is one of the most frequent diseases of crop. In the last decades the importance of disease has decreased in feeding maize production, however its importance increasing again nowadays, especially at sweet maize hybrids. The aims of this work was to find hybrids possess of resistance, and to evaluate which ones are more or less susceptible under field artificial inoculation circumstances. Among feeding maizes the less susceptible hybrid was ‘P9578’, and the most susceptible ’NK Columbia’ hybrid, and differences in cob infection between them was significant (8.8%). At sweet corn hybrids the less susceptible was ’Prelude’, while the most susceptible was ’Jumbo’ with very high significant 74.6% differences.
-
Near infrared spectroscopy (NIT) analysis of maize hybrids starch content
119-122Views:160The purpose of my research is to find the most favourable maize hybrids for bioethanol-production feedstock, using the so called „NIT”, near infrared spectroscopy method in the analysis of the inner contents especially of starch content. The other goal of my analysis is to reflect on how the effects of the most important growing factors – such as irrigation and the use of different dose fertilizers – contribute to the maize hybrids starch content.
-
The effect of hybrid, nutrient-supply and irrigation on the grain moisture content at harvest and the starch-content of maize (Zea mays L.)
89-95Views:120Maize is a worldwide dominant plant. According to nowadays plant production principles it is important to investigate and optimize the site-specific nutrient-supply and other production factors, such as hybrid and irrigation, in the case of this plant as well.
At the Research Institute of the University of Debrecen, Center of Agricultural Sciences and Engineering, at Látókép the effect of nutrient-supply and irrigation on the quantity and quality parameters of different hybrids were investigated in a small plot long-term field experiment. In this paper we introduce the results regarding the corn moisture-content and the starch content of the yield.
We have chosen three maize hybrids – that have been bread in Martonvásár – for our investigations. The effect of macronutrients is investigated in this experiment on five levels. The half of the experimental area can be irrigated during the vegetation period – whenever it is needed – by linear irrigation equipment, but on the other half only the water amount originating from the precipitation can be used by plants.
In the year 2008 the hybrid affected the grain moisture content at P=0.1% level, while nutrient-supply had an effect at P=10% significance level. We haven’t revealed either any effect of irrigation or of interrelationship between production factors. It can be stated that there are differences between the hybrids on each nutrient-supply and on both irrigation levels. The grain moisture content increased parallel to the longer vegetation
periods.
The starch content of maize is mostly affected by the hybrid,
so on P=0.1% significance level. Regarding our results, it can be
stated, that the starch content shows a decreasing tendency
parallel to the longer vegetation periods. -
The effect of plant density to the yield results and the yield components of maize hybrids
89-93Views:150Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way. -
Examination of the population density and sowing date of different maize genotypes in the Hajdúság region
111-115Views:137The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics applied
in the experiment satisfied the requirements of modern corn cultivation.In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.
In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NK
Cobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the different
plant densities. -
Investigation of directions of crossing in maize (Zea mays L.)
43-48Views:109In Hungary, we examined eight features of twelve direct cross hybrids over a period of three years. The twelve hybrids were derived from direct and reciprocal crosses of four parental lines. We did not find significant differences in the cases of stalk diameter and leaf number in the average of 3 years in any of the hybrids. Statistically explainable differences in primary branches were observed in hybrids UDH5 and UDH8 and also in UDH6 and UDH11. It was evident in both instances that degrees of heterosis in reciprocal crosses far exceeded those of direct ones. High tassel branch number was dominant over the low one; consequently, parents with higher tassel numbers enforced their effects during the formation of this trait in hybrids. We experienced positive correlation (r=0.67**) between plant height and main ear height. A positive correlation (r=0.89**) was also found between the tassel length of the main axis above the lowest and the upper side branch. We observed a medium correlation (r=-0.42**) between the number of primary lateral branches and plant height. The number of primary lateral branches showed the highest heterosis. These results can be utilized in practical selection and seed production.
-
Effect of Planting Time of Maize on Factors Influencing Yields in 2001-2002
112-116Views:92In this paper we analysed the results of maize planting time experiments by the Department of Crop Sciences and Applied Ecology of the University of Debrecen, Centre of Agricultural Sciences in 2001. We made the experiments at the experimental garden of DE ATC in Hajdúböszörmény.
We examined in 2001, 2002 ten hybrids with three planting times. The results were analysed by analysis of variance with two factors. In 2001 the yields were high, between 7.2-11.6 t/ha. The seed moisture contant of hybrids was 6-8% less after early planting than after late planting. The vegetation period of the hybrids became longer after early planting, which helped the drying-down of the hybrid and determined the seed moisture content at harvest to a great extent.
In 2002 the yields were high, between 4.02-10.47 t/ha. The seed moisture contant of hybrids was 5-14% less after early planting than after late planting.
On the basis of the above, variety specific technologies should be applied where the planting time is adapted to the hybrids. In accordance with the other cultivation factors. -
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:162From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Impact of environmental changes resulting from different sowing dates on maize yield
99-104Views:150Three Debrecen maize hybrids of different genotypes (Debreceni 285, Debreceni 377 and Debreceni 382) were examined on chernozem soil in a field experiment. During the two years of the experiment (2009–2010), we wanted to get to know how the examined hybrids reach to different sowing dates and what impact early, optimal and late sowing has on yield.
In 2009, balanced soil and air temperature resulted in steady emergence. However, the low temperature in early April and the cooling down in mid-May 2010 caused a delayed emergence.
The grain moisture content at harvesting and the high yield showed a strong crop year effect. In 2010, yield was much lower (1.664 t ha-1) and grain moisture was significantly higher (34%)than in 2009.
In 2009, early sowing resulted in yield decrease (P<0.05), but it also significantly reduced grain moisture at harvesting (P<0.05). Although late sowing slightly increased yield (not significantly), but grain moisture at harvesting increased by 9.2%. In 2010, optimal sowing date was shown to be the best alternative from the aspect of yield, but there was no significant difference in comparison with early and late sowing. Grain moisture at harvesting greatly increased (13.3%).
The Debreceni 382 maize hybrid reacted to sowing dates flexibly, neither early, nor late sowing affected its yield significantly and the grain moisture at harvesting showed 12% increase in the case of the late sowing date. In 2009, maize hybrids Debreceni 285 and Debreceni 377 reached their highest yield in the case of the sowing date which was shown to be optimal (23rd April), while the different sowing dates had no effect on yield in 2010.
-
Magnesium uptake dynamism of maize (Zea mays L.) on prairie soil
83-89Views:86Different influence factors on the magnesium (Mg) uptake in case of three maize hybrids with different long vegetation period have been investigated at the Experimental Station of the University of Debrecen, Centre of Agricultural Sciences and Engineering, at Debrecen-Látókép. The soil of the experiment is a calcareous chernozem, based on loess, with high fertility, that is characteristic for soils of the region Hajdúság.
Upon irrigation is the experiment divided to main plots, by different hybrids into sub-plots, while treatments of five nutrientsupply levels with fixed N:P2O5:K2O rate (beside control)mean sub-subplots. Soil samples were taken from the upper, cultivated soil layer 3 times during the year 2008. Their pH has been measures in a 0.01 M CaCl2-solution and their Mg-content from the same solution and from ammonium-lactate acetic acid (AL) extract. Plant samples were taken seven times in the vegetation period, of which we measured the Mg-content. Beside this, the during the
vegetation period by maize biomass extracted Mg-amount has been calculated using fresh and dry matter weights. The effects of irrigation, hybrids and nutrient-supply levels on the soil pH and on the AL- and CaCl2-extractable Mg-amount have been studied, as well. After that I tried to find a correlation between soil pH and the Mg-content of soil determined in different extractants, beside this between the by the two solutions extracted Mg-amount. -
The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
105-110Views:194The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.
-
Determining factors of test weight in maize (Zea mays L.)
40-42Views:147Most domestic maize production products are sold on markets abroad. Among the increasingly restrictive quality requirements, the demand for the measurement of test weight has also appeared. This measurement is not unfamiliar in the case of other cereals, such as wheat and barley, but it has not been applied widely in maize. It is likely for this reason that we have such little information and research available on this topic. In this study, we show the current state of this field with references from domestic and international literature.
The density of maize is the weight of a particular volume and the most frequent unit is the test weight (kg/hl). This physical quality factor plays important roles in the storage, transport and mill industries. The value of test weight is influenced by many factors. The most important ones are the moisture content of grains, drying temperature, drought, precipitation, early frost, and the hybrid characters of a given genotype (grain type, FAO number). In general, the grain with higher moisture content has lower test weight and the higher temperature during (above 82°C) desiccation also leads to unfavourable values. Factors such as a drought interval after flowering, early frost in the case of hybrids with higher FAO numbers, injuries by insects, as well as fungal infections also influence the structure and moisture content of the maize grain.
In the future, broader studies (hybrid testing, application of new agrotechnical elements) will be needed for understanding of the factors effecting test weight.