Search
Search Results
-
Polylactic Acid as a Potential Alternatives of Traditional Plastic Packagings in Food Industry
123-129Views:321Huge quantity of synthetic polymers is used as packaging materials in different fields of food industries. A significant part of these polymers applied as a primary, direct food contact construction. The scoped application area is the sweet industry. In this field Polystyrol (PS), Polypropylene (PP) and Polyethylene terephthalate (PET) have used but during the last fifteen years the usage of PET has been grown. In one hand the price of this material is efficient, form other hand the PET is the one of the most safe (for food industrial applications) petrol chemical plastic that can be used as primary or secondary food contact packaging material. To maximize the customer safety and minimize the environmental impact of traditional PET, a new bio-sourced and bio-degradable alternative polymer aimed to be used in this special food industrial segment. One of the potential alternatives is the Polylactic acid (PLA) that would be a possible substitute as it is compostable and produced from renewable sources and has good physical and mechanical properties [1].
-
Investigation of Zeta Potential of Water Based Nanomagnetite-Bentonite Dispersions
54-66Views:120The stability of different type nanomaterials play an important role among recent scientific and industrial
challenges, including the examination of the effect of polymers, surfactants and their mixture on surface and electric surface properties and aggregation extent of dispersed particles, which are of utmost importance. Bentonite and its composite with different nanomaterials are frequently used for instance in environmental protection for wastewater treatment, since due to their great specific surface area they have excellent sorption properties. There are several publications in the literature for the application of bentonite in drilling muds. By using them the fluid loss can be decreased during the drilling process, the filtration of the fluid can be increased, it also improves the rheological properties and the formation damage can also be mitigated. During research the investigation and the analysis of the zeta-potential of nanoparticles and their composites at different pH and salt content can be an interesting topic. During our experiments the electric surface properties of nanomagnetite synthetized in laboratory (NM), cation
exchanged bentonite from Mád (Be) and the composite particles of these particles were investigated. Hybrid particles of different compositions (9:1, 7:3, 1:1, 3:7, 1:9) were analyzed at different potassium chloride concentrations (0.1 – 0.0001 M). The surface adsorption on the surface, i.e. the change in the surface charge can be traced well by analyzing the obtained zeta-potential values. The behavior of such systems was observed in the full pH interval, thus, valuable data were obtained regarding the colloidal stability. As for the stability, different requirements may emerge in practice, there are application fields where the colloidally stable system is advantageous, on the other hand, in some cases, ceasing the stabile system is the goal. Our investigations are of high importance in terms of stability and its characterization. -
Environmental Considerations in Aircraft Manufacturing Industry Through the Example of Boeing Andairbus Companies
59-66Views:90Aircraft manufacturing industry has developed dynamically in the last decades. Reinforced polymers have become the most dominant raw materials, while the recycling rate of the generated industrial waste has also increased. The fuel efficiency of the engines has increased, and the emitted CO2 per capita has significantly fallen. However, the environmental impact of the aircraft manufacturing industry seems to reach a permanent level. In this study, we have analyzed the environmental impact and the environmental considerations of the aircraft manufacturing industry through the examples of Boeing and Airbus companies. Our goal was to determine the relation between industrial growth and the environmental impact, particularly to the potential innovations.
-
New Method for Dynamic Tribological Test of Engineering Polymers
25-29Views:110In this article, tribological tests of Polyamide 6 (PA 6), Ultra High Molecular Weight Polyethylene (UHMW PE) and Polyoxymethylene copolymer (POM C) by a new testing method is introduced. The tribometer used in the test is capable for pin-on-disc measuring within all possible layout known in tribology practice, otherwise can be modified into special model of fatigue sliding test. The pin was a specimen made from examined materials, always in contact with a rotating metal disc under a normal load, which is usually static. However, since vibration exists in every practical scene as an important phenomenon, for instance in turning process, we added vibration load into the test. The supplement load is generated by a special-designed vibrating machine. Then properties of examined materials can be studied more profoundly under vibration load. As a result, different value of friction coefficient in static and vibration load have been discovered and taken into comparison.
-
Development of a Small-Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing
365-371Views:269In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).
-
Utilisation and Quality Management of Power Plant Fly Ash
329-337Views:157Over the past decades, both the residential and industrial energy demand has increased due to the continuously growing consumption and production. As a large share of the electricity is still produced using fossil fuels, the utilisation of the by-products is a contemporary and pervasive issue. Fly ash is generated in large quantities in coal-fired power plants and has been proven to be an appropriate raw material for various industrial uses. Among others, it is applicable as an additive and lightweight aggregate in the cement and concrete industry, can be used for CO2 sequestration, glass foam production, catalyst production, or as a base material for geopolymers, as well. Geopolymers are inorganic polymers produced via the reaction between solid alumina and silica containing or alkali silicate materials in alkali media. Due to their numerous advantageous properties and wide variety of utilisation possibilities, research on fly ash base geopolymers became widespread topic. The quality of fly ash is determined by technical requirements, and the degree of quality control requirements depends on the final use. In certain fields of applications, standards and regulations have already been created to ensure the consistent quality of the final products made from fly ash, e.g. in the cement and concrete industry. There are various methods for fly ash processing, however, the methods to achieve the necessary properties are not standardised.
