Search
Search Results
-
Modern use of geothermal energy in Nagyszénás (Case Study)
106-115Views:383A project based on geothermal energy use in Nagyszénás, Békés County, Hungary, was finished on December 20, 2015. The construction investments were realized with the support of the European Union from tender funds won in the financial cycle of 2007-2013 in the total value of HUF 1.578 billion. The thermal water utilization investment was realized with unique technical solutions in the country, and as a result, a modern, economical heating system using green energy source was built, and now provides energy for the public institutions of the settlement and for the newly established bath complex. During construction and operation, several unforeseen technical problems arose, which could only be solved by using new technical elements. The high salinity and high temperature of the extracted thermal water required special engineering solutions. During operation, modifications and changes in technological elements were required at several points for the safe operation. The purpose of this article is to present these technical interventions, which made the reliable operation possible, thus the system provides a suitable alternative to natural gas-based heating.
-
Development of a Small-Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing
365-371Views:605In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).
-
Self-developed Controller System –based on Open-Source Applications
97-105Views:207In the University of Debrecen Building Mechatronics Research Centre faced by the application of building automation technology, are tackled by cutting edge research performed at the Research Centre. The embedded device system, the focus of the ongoing project at the Research Centre, is programmable, reconfigurable, and adjustable. The design of an efficient embedded system must meet regulatory requirements, for optimizing building energy efficiency. The system provides solutions for a range of industrial applications, and peaks the interest of building services providers (e.g. SMEs).
-
Application of Mathematics in Physics and Chemistry in Secondary School
33-38Views:226In the frame of the project EFOP-3.6.1-16-2016-00022 „Debrecen Venture Catapult Program" a material was elaborated in which I summarize the most important applications of high school mathematics in physics and chemistry. It is important for the students to see that teaching mathematics is not self-serving but it can be applied in many problems in different natural sciences.
-
Case Study of Unilever's Zero-Emission Target Realization
16-36Views:968This paper presents a detailed case study of Unilever’s strategy and progress toward achieving zero carbon emissions, focusing on Scope 1, 2, and 3 emissions. The study analyzes a 10-year time series of both financial and non-financial data to assess the relationship between sustainability indicators, such as greenhouse gas (GHG) emissions, total and renewable energy use, and the company’s operating profit. Forecasting techniques were applied to project future emission levels based on historical data, while correlation analysis was used to evaluate the relationships between key variables. The results show a strong positive correlation between total energy use and CO₂ emissions, highlighting the importance of energy efficiency in emission reduction efforts. However, no significant correlation was found between operating profit and CO₂ emissions or energy use, suggesting that sustainability initiatives have not yet had a measurable direct impact on profitability. Despite this, Unilever has demonstrated substantial progress toward its climate targets, including a 91% reduction in CO₂ emissions per ton of production (compared to a 2008 baseline) and the transition to 100% renewable electricity in many of its facilities. The study concludes that while sustainability measures may not immediately influence profit margins, they are essential for long-term competitiveness and corporate responsibility. This case provides valuable insights for firms aiming to integrate environmental performance into strategic decision-making.
-
Analysis of Construction Risks
1-10Views:224The article from a longer, in practical working risk management theory and general methodology, as well as the circumstances of the construction projects for bridging study assumed abyss has been created based on the instalment. The emphasis placed on construction projects risks typical data resources, project planning methods. Construction risks and the risk management methods dealing with a separate study.
-
Bekele Desta and M. Lunga: Analyzing Determinants of Construction Project Resilience and Success in Ethiopia: a Structural Equation Modelling Approach (PLS-SEM). International Journal of Engineering and Management Sciences. doi: 10.21791/IJEMS.2026.03
124-125Views:37In the original publication, the authors identified three errors.
-
Examining Drone Logistics Solutions in Retail
48-61Views:326The possibilities of using drones in transportation will be determined by the capabilities of drone technology, legislation, various advocacy and trade unions, and the degree of general acceptance. Technology and infrastructure are given, customer habits and needs are favourable, and emissions generated by packets moving between two points are growing steadily. Despite these favourable conditions, the effects of drone use should be thoroughly reviewed. The environmental impacts of the project were analyzed by PEST analysis and the main influencing factors were studied using the Porter model. Concluding our results based on questionnaire surveys and feasibility examinations of fast food delivery, it can be said that a system based on drones can efficiently be operated and cost-effective using round trips, however, the legal issues and uncertainties that arise in the delivery of drone hippers remain a very significant hindering factor for a long time.
-
Geometry Around Us - Development of the Skills for Students in the Secondary Education
112-121Views:190In the framework of the project EFOP-3.6.1-16-2016-00022 00022 „Debrecen Venture Catapult Program”t workshops are held in secondary schools in order to show for the students that the precise knowledge about the mathematical backgrounds is an important part of the engineers works. We give lot of examples in our environment for appearing of quadratic surfaces; for instance in architecture, in mechanical engineering life (gear– wheels, twist drills,…etc.).The development of geometrical spatial ability happen by the help of using 3D animations, moreover we investigate the changing of the shape of surfaces by mathematical shoftwares. We are going to built hyperboloid of one sheet and hyperbolic paraboloid.
-
What is the function? – experiences of an occasion among the secondary school students
560-570Views:231In the frame of the project EFOP-3.6.1-16-2016-00022 „Debrecen Venture Catapult Program" it was held an occasion among secondary school students the aim of which was formation of that concept which is very important in the engineering area. In many cases in order to solve problems necessary that students have an "ideal" function concept image (the image is interrelated with the notion of the concept) and they can change between different representations of the function. In our paper we will show the experiences of the occasion in which was formed the function concept by investigation of several relationships from the everyday life and engineering area with the help of individual and cooperative learning method.
-
Review on Construction Procedures of Driving Cycles
266-285Views:449The goal of this paper is to give an overview of the literature of construction techniques of driving cycles. Our motivation for the overview is the future goal of constructing our own driving cycles for various types of vehicles and routes. This activity is part of a larger project focusing on determination of fuel and energy consumption by dynamic simulation of vehicles. Accordingly, the papers dealing with sample route determination, data collection and processing, driving cycle construction procedures, statistical evaluation of data are in our focus.
-
Maintenance Strategies and Life Cycle Costs of Renewable Energy Systems
106-116Views:261Life cycle costs are important factors in decisions on renewable energy investments. Since maintenance costs generally constitute a high portion of the life cycle costs, the maintenance strategy applied in a project can affect the bottom line significantly. The effective maintenance tools used in the production industry (e.g., diagnostics, condition monitoring, data management, integrated information systems, machine learning, and automated decision making) can be involved in planning and maintenance of renewable energy systems to gain the benefits of these approaches. In this paper the effects of maintenance strategies on life cycle costs are investigated and the benefits of up-to-date condition monitoring techniques are presented through case studies.
-
Algorithmization in Playful Way
105-111Views:236In the “Extending the Technical Researcher Capacity, Developing Research Services and Building a Knowledge Square in Engineering Education” sub-program of the EFOP-3.6.1-16-2016-00022 "Debrecen Venture Catapult Program" project a research group on engineering and innovation skills was founded. This team undertook to develop skills development workshops for high school students in connection with mathematics, physics, descriptive geometry and informatics topics. In this paper the "Algorithmization in playful way" workshop will be presented, where we develop the student's algorithmic skills by playing computer games.
-
International Financial Reporting Standards Convergence Process for Small and Medium-Sized Entities
1-12Views:894The "International Financial Reporting Standards (IFRS) Convergence Process for Small and Medium-Sized Entities (SMEs)" seeks to address the unique challenges and requirements faced by smaller businesses in adhering to international accounting and reporting standards. This initiative recognizes that SMEs operate in diverse economic environments and have distinct financial reporting needs compared to larger enterprises. The primary purpose of this convergence process is to enhance the relevance, accessibility, and practicality of IFRS for SMEs, fostering consistency in financial reporting practices across global markets.A project to create accounting standards appropriate for small and medium-sized businesses (SMEs) is being worked on by the International Accounting Standards Board. This abstract provides an overview of the convergence process involving International Financial Reporting Standards (IFRS) for Small and Medium Sized Entities (SMEs). With the global landscape of financial reporting constantly evolving, the integration of IFRS tailored specifically for SMEs marks a pivotal transition towards harmonizing financial reporting practices. This paper examines the essential elements and implications of this convergence, addressing the challenges and benefits faced by SMEs as they align with these international standards. The analysis delves into the driving factors behind the convergence, including the necessity for a unified and transparent financial reporting framework, aiming to facilitate comparability and accessibility of financial information across borders. Furthermore, the abstract discusses the potential impact on SMEs' financial reporting quality, decision-making processes, and access to capital. Through a comprehensive review of the convergence process, this abstract seeks to contribute to the understanding of the significance and implications of adopting IFRS for SMEs, thereby providing valuable insights for practitioners, regulators, and stakeholders in the financial reporting ecosystem.
-
Applied Mathematics exercises in a secondary grammar school lesson
554-559Views:291In the frame of the project EFOP-3.6.1-16-2016-00022 „Debrecen Venture Catapult Program" on may, 2019, I maked a test and it was completed by a secondary grammar school students in Mátészalka. In this lesson there were many exercises that showcase the different applications of mathematics.
-
Visual Analysis and Geometric Modeling of Metal Foams
89-92Views:223The development of an efficient procedure for 3D modelling and finite element simulation of metal foams
is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding
engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the
center of the research. The aim of this project is to analyze the related literature and to adapt the results may be
considered.
