Search
Search Results
-
The Developmental Possibilities for Methods of Real Estate and Farm Property Evaluation in Agriculture
241-247Views:201Different methods for evaluating property have gained greater importance in agriculture since the change of regime. The open market evaluation could be the best method if the agricultural property had significant turnover, which could serve as a reliable comparison. However, there is no notable turnover, and selling is scarce. And, when there is some, the sales contracts are not available. On the other hand, the open market evaluation is almost the only one assessing method in Western Europe and in the United States. The matrix comparing market data in my methodological development helps to estimate the effects of the elements which determinate real estate value of farms.
Another method for evaluating farm property is the discounted future earnings. Enterprises are able to produce series of income continuously during their working periods, which can be considered as perpetuity. This is the base of the discounted future earning evaluation. Determination of income generating capacity is not an easy task. It is also difficult to choose the proper rate of capitalization. If this rate is higher than the usual level, the property will be underestimated. If it is lower, the property will be overrated. According to my calculations the profitability of certain farms of animal breeding may be evaluated under different operating conditions. Furthermore, the capitalisation interest rate may be determined in an objective way.
The problem of applying the depreciated replacement cost evaluation method is that there are big deviations among investment costs in tenders of contractors; moreover the estimations of special depreciation forms are rather subjective. One of the process’s greatest difficulties for reliability is that it is doubtful whether depreciated replacement cost could reach the real market value. The utilisation of this method may be spread further in the future by standardising average gross replacement cost of building as well as by measuring depreciation more objectively. -
Evaluation of the Green bean variety candidate BU-16
75-81Views:176This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Optimized balance between crop productivity, restoration and maintenance of vital soil functions and soil carbon sequestration and storage – the SmartSOIL (FP7) project
213-215Views:246Soils provide the most indispensable function of supporting the production of food and feed for a growing human population. At the same time they provide a range of regulating and supporting functions related to climate change and removal of greenhouse gases. The majority of the soil functions are closely linked to the flows and stocks of soil organic carbon (SOC); low levels of both flows and stocks may seriously interfere with several of the essential soil functions and thus affect the ecosystem services that soils deliver. Soil degradation is considered a serious problem in Europe and a large part of the degradation is caused by intensive cultivation practices in agriculture. The aim of the SmartSOIL project is to link the results of different scientific fields through a holistic and multidisciplinary approach and as a result develop a decision making tool contributing to sustainable development.
-
Globalization of Services in Practice. (Analysis of Success on Polish Example in the Years 2003-2011)
67-71Views:181The globalised world is looking for savings and actually finds it in Poland. Global economy is a system of connected vessels, functioning in close relations, with increasing role of Poland. The text demonstrates the developmental perspectives of outsourcing and offshoring in the largest Polish metropolies and the possibilities of the development of smaller cities.
-
Regional significance of the Debrecen International Airport
187-190Views:197In the following essay I would like to examine the Debrecen International Airport’s reginonal status, significance and development opportunities. Furthermore, I would like compare the passenger traffic of Debrecen’s airport with other regional airports in Middle-East Europe during the 2005–2012 period. In the second part of my essay, I would like to share the experience of my questionnaire survey and a possible future perspective for the Debrecen International Airport.
-
The economicalness of apple production in view of post harvest technology
125-131Views:314This study analyses how the level of postharvest technology’s development influences the economic efficiency of apple production with the help of a deterministic simulation model based on primary data gathering in producer undertakings. To accomplish our objectives and to support our hypotheses three processing plant types are included in the model: firstly apple production with no postharvest and prompt sale after the harvest, secondly parallel production and storage combined with an extended selling period and thirdly production and entire postharvest infrastructure (storage, sorting-ranking, packing) with the highest level of goods production and continuous sales. Based on our results it can be stated that the parallel production (plantation) and cold storage, so the second case is proved to be totally inefficient, considering that the establishment of a cold storage carries enormously high costs with resulting a relative low plus profit compared to the first type of processing plant. The reason for this is that this type is selling bulk goods without sorting-grading or packaging; storage itself – as a means of continuously servicing the market - is not covered properly by the consumers. Absolute efficiency ranking cannot be established regarding the other two processing plants: plantation without post-harvest infrastructure resulting lower NPV, but a higher IRR, DPP and PI as developing a plantation and a whole post-harvest infrastructure. Former processing plant type is favourable considering efficiency ratios describing capital adequacy, while the latter is in terms of income generating capacity.
-
Preliminary study: The effect of gibberellic acid and girdling application on two dual-purpose grape varieties in a cool climate
139-144Views:559In our 2023 experiment, Nero and Muscat Pölöskei grapevines were treated with gibberellic acid (12 mg L-1) during flowering, followed by stem-end girdling at the onset of berry development. Photosynthetic activity was monitored regularly. Assimilation rate (A, µmol CO₂ m⁻² s⁻¹) and transpiration rate (E, mol H₂O m⁻² s⁻¹) were measured under natural light. Sugar content and acidity were assessed via refractometry, while berry dimensions and texture (e.g., berry hardness [Bh, mN]) were recorded. Gibberellin treatment increased sugar content compared to both control and girdled samples. However, girdling significantly enhanced sugar accumulation in Muscat Pölöskei compared to untreated samples. Gibberellin also induced berry elongation, increasing the longitudinal axis in Nero (19%) and Muscat Pölöskei (24%). Girdling temporarily reduced photosynthetic activity, which recovered post-healing. The elongated berries due to gibberellin treatment led to a looser cluster structure, which is beneficial for Nero, which is prone to fungal diseases due to dense clusters.
-
Heavy Metals in Agricultural Soils
85-89Views:177The soil constitutes the basis of the food chain. To keep soil conditions in a good trim is very important, it’s part of the sustainable development and of producing food supply harmless to health.
In some cases, soil productivity is the only important part, qualitative requirements or economical characteristics can improve it. The soil is threatened by two danger factors: the soil degradation and the soil pollution. The accumulation of different harmful and/or toxic substances in the soil is well known. Heavy metals constitute a part of it. Metals in the soil and in the soil-solution are balanced. This balance depends on the type of the metal, on the pH, on the cation-band capacity of the soil, on the redox relations and the concentration of cations in the soil.
To be able to handle the metal contamination of the soil, it is important to estimate the form, the possible extension and the concentration of metals.
Of course, the different types of soils have different physical-chemical, biological and buffer capacity, they can moderate or reinforce the harmful effects of heavy metals. To draw general conclusion of the dispersion and quantitative relations on the metals originated from different contamination sources is hard, because in some emissive sources contamination is limited in small areas but on a high level, some others usually expand on larger areas, and as a result of equal dispersion, the contamination’s level is lower.
Heavy metals – unlike alkali ions – strongly bond to organic materials, or infiltrate in a kelát form. Their outstanding characteristic is the tendency to create metal-complex forms. Kelats take part in the uptaking and transportation of heavy metals. Heavy metals exert their effects mostly as enzyme-activators.
The metals cannot degrade in an organic way, they accumulate in living organisms, and they can form toxic compounds through biochemical reactions.
Lot of the heavy metals accumulate on the boundaries of the abiotic systems (air/soil, water/sediment), when physical or chemical parameters change, and this influences their remobilization.
Human activity plays a great part in heavy metal mobilization, results in the human origin of most biochemical process of metals.
To understand the toxic influence of accumulated metals of high concentration, their transportation from soils to plants or their damage in human health, must clearly defined and investigated.
For effective protection against soil pollution, the types and levels of harmful pollution to soil must identified, regarding legal, technical and soil-science aspects, preferable in a single way. Difficulties in this area mean that toxicity depends on loading, uptake, soil characteristics and living organisms (species, age, condition etc.), furthermore, local and economic conditions considerably differ. -
Crop Load, Fruit Thinning and their Effects on Fruit Quality of Apple (Malus domestica Borkh.)
29-35Views:706Crop load, a quantitative parameter used by industry, is generally defined as the number of fruit per tree. It is often expressed in terms of number of fruit per trunk cross-sectional area (fruit/TCSA). Crop load is the most important of all factors that influence fruit size, and the removing of a part of the crop is the most effective way to improve fruit size.
The potential size of a given pome fruit is determined early in the season and growth proceeds at a relatively uniform rate thereafter. This uniform growth rate permits the accurate prediction of the harvest size of the fruit as early as mid-summer. The growth rate, once established, is not easily altered, and fruit numbers, therefore, can affect fruit size only within definite limits and maximum effectiveness requires adjustment in fruit numbers relatively early in the season. It was established, that „thinning does not change a potentially small fruit into a large fruit, but rather insures that a potentially large fruit will size properly.” Emphasis should be on estimating fruit numbers rather than fruit size.
Fruit thinning can quickly reach the point of diminishing returns. Rather than a high percentage of large fruits, the objectives of thinning should be the elimination of the smallest fruits, improved fruit quality and annual production. Fruit thinning is accomplished by hand or chemical thinning. Chemical thinners are separated into categories as bloom thinners and post-bloom thinners. Early removal of potential fruit (blossom thinning) is currently used in many apple producing areas to enhance flower initiation for next year’s crop and thus, return bloom. It also results in reduced competition for photosynthates. Blossom thinners usually have a caustic effect on floral parts.
The amount of fruit left on a tree should be determined by the vigor and general condition of the tree. Leaf area per fruit affects the number of spurs flowering the following season. It can be difficult to separate timing and fruit number effects in crop loading studies, as abscission rates after hand thinning of retained flowers/fruitlets tend to very with the time of hand thinning. -
Assessment of energy generated by biogas production in the educational industrial unit of the University of Szeged, Faculty of Agriculture, with special regard to biomass originating from agriculture and the food industry
137-140Views:190The importance of waste treatment is increasing. Environmental aims are the main driving force. Stricter regulations for landfills lead to the development of alternative treatment methods for waste. For agro-mechanical research, wastes from animal rearing and the food industry, secondary-tertiary biomass, is of deep concern. Available technology is versatile and relatively simple to use as a reliable and effective means of producing a gaseous fuel from various organic waste. The most common application has been the digestion of animal dung, agricultural, and food-industrial waste. This was studied by our department in our pilot farm of our Faculty. The 50-dairy cow, family sized model farm was built in the summer of 1991, as a result of a Dutch – Hungarian cooperation, on the property of the Faculty. The new pig farm, with 30 sows, and the new goat farm, with 100 nannies, was given to the Faculty on 25 April 2001. On the basis of livestock data, the annual dung production and the producible energy were determinate. The energy was calculated by biogas production coefficients in literature.
-
Development and Economic Benefits of Open Source Software
161-168Views:179This paper discusses open source software which became one of the most important trends in the software industry recently. The most often asked questions in this area are those related to intellectual property rights. The author used a more general approach and tried to give a survey of the advantages and disadvantages that the market players (developers, government and last but not least users) have to face.
After sketching the history of open source software and discussing some of the prevailing definitions, we turn out attention to the starting point: what motivates the developers? Then we give a general overview of the advantages and disadvantages of open source software. In the next part, the author analyses the software policies of the EU partially based on the abovementioned advantages and disadvantages. Finally the paper concludes with the discussion of user benefits and costs. -
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:401Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Innovation Potential and Regional Competitiveness studies in the Northern Great Plain region
223-228Views:2091.5 million people live in the large region containing 3 counties, which makes it the second most populated region after Central Hungary. Its economy and land use are still defined by agriculture and it has been the least developed region in the country for a long time. In the country this region has the second lowest GDP per capita and employment rate. In contrast to the low values of the economic indicators the region has high potential for innovation. The University of Debrecen is located in the region having one of the widest range of education and intensive research and development is also a characteristic of the region.
-
Environmental inspection agro tech – guarantee sustainable development agricultural systems
41-42Views:234Shown the expediency of the environmental expertise technologies of growing crops in terms of impact on soil fertility, crop phytosanitary status, quality, chemicals migration, biological soil activity, crop productivity, which ensure avoidance of adverse impact on the environment and human health.
-
Lessons of a stripe rust epidemic in a wheat fungicide trial in Debrecen
35-46Views:305During the 2014 year a fungicide application trial was made as a part of technology development in Debrecen (East-Hungary). Both in this trial and across in Hungary a serious stripe rust epidemic developed and caused great yield losses. The first sympotoms were observed in April on one of trial plots and during some following weeks a serious infection grown up. On the base of 13 fungicide active ingredients and dosages by two spraying applications, their efficacy could be evaluated in stripe rust control. Picoxystrobin 250 g/L acive ingredient applied in 0.6, 0.8 and 1 L/ha dosages (Acanto), picoxystrobin 200 g/L + ciproconazole 80 g/L combined active ingredients in 0.5, 0.75, and 1 L/ha dosages (Acanto Plus), epoxiconazole 83 g/L, moreover protioconazole 125 g/L + tebuconazole 125 g/L combinations gave good efficacy, respectively. The yield of well protected plots were 5 to 8 t/ha, but the losses were 40-70% when fungicides with no sufficient efficacy in stripe rust control were applied. The great infection, which was observed on different grasses late in the Autumn, 2014 might forecast a further stripe rust epidemic for the 2015 year.
-
Measuring methods of the efficiency of university technology transfer
21-29Views:239Nowadays, the socio-economic role and function of universities as well as their relationship with the industry, are more than ever in the focus of both the political and the academic spheres. The importance of knowledge and technology transfer is increasingly stressed in various economic development plans and strategies. The increased interest is due to the fact that universities are located at the crossroads of education, research and innovation, which might be crucial for the country's economic competitiveness. The commercialization of university research results is a well-defined task of technology transfer offices. Measuring the efficiency and successfulness of such offices is a difficult, but not impossible task. The present article aims to analyze the existing literature on measuring the efficiency of technology transfer activities and to introduce the most commonly used measuring methods of effective technology transfer. The article attempts to answer the question how to measure the efficiency of technology transfer by reviewing the available international literature and by analyzing secondary data.
-
Development opportunities for storing and displaying of spatial data in long-term experiments
81-86Views:259Long-term experiments are required to evaluate the impact of irrigation, nutrient utilization, and year factor as well as to assess the potential consequences of climate change. However, in the long-term experiment, it may be necessary to display spatial data for each parcel, either for investigation of soil heterogeneity or presentation. This article aims to provide help for researchers working in long-term experiments for storing and displaying spatial data.
After the outlines of each experimental site were measured with GPS, a spatial database has been created in Quantum GIS. Then, a filter script in R statistical environment using RStudio graphical interface was written. The script helps avoid the QGIS data input interface so that large data can be attached to each parcel directly and as a result there is no need for a separate data entry, only the basic statistical database.
The created GIS database can be used in many ways; it can be exported to KML file format that can be displayed using Google Earth. It is possible to view exported KML files in Google Drive with importing them to Google My Maps application, and with that a browser can display the map. With the Google Drive the maps can be shared within the research group, additionally the outlines can be edited and it is possible to upload the measurement data to the attributes table to existing empty table columns. The map created in Quantum GIS can be used for presentation purposes.
-
Allelopathic effects of water extracts of pieces of wooly cupgrass (Eriochloa villosa) on the seedlings of field crops
167-170Views:443In Hungary, the woolly cupgrass (Eriochloa villosa [Thunb.] Kunth) endanger row crops (i.e. corn, sunflower). Its fast spreading based on some reason viz. long-lasting emergence, reduced sensitivity to many kinds of herbicides, vigorous competitional ability and fast initial growth. Allelopathy, ability of many plant species to produce one or more biochemicals wgich is used tocompete with each others. In this experiment we examined, whether the woolly cupgrass possesses allelopathy, and if so, how influences on the development of cultured crops like maize, sunflower and lettuce.
-
Influence of nitrogen fertilisation on the technological quality of wheat
47-55Views:357Wheat is one of the most grown crops around the world. Its primary use is in the production of bread, bakery, and confectionery. The provision of essential nutrients, mainly nitrogen, plays a pivotal role in the growth and development of wheat. The wheat varieties used in the experiment are Alfold and Mv. Menrot. The rates of nitrogen used in the experiment are: 0, 200, 400, 600, 800, and 1000 kg N ha-1. The aim of this study is to evaluate the effect of nitrogen fertilisation on technological quality of wheat and to find the appropriate fertiliser rate to reduce pollution. The results indicate that nitrogen fertilisation did not show a significant effect on thousand kernel weight and test weight. However, nitrogen fertilisation significantly affected protein content, gluten content, Zeleny sedimentation index, and the falling number. The higher the nitrogen fertilisation the better the technological quality parameters of the wheat. The protein content, gluten content, Zeleny sedimentation index and the falling number were the lowest at 0 kg N ha-1 followed by 200 kg N ha-1 then 400 kg N ha-1 and the highest at 600 kg N ha-1.
-
Baking quality of winter wheat (Triticum aestivum L.) in the long-term experiments on chernozem soil
152-156Views:352Agriculture has traditionally an important role in Hungarian economy and rural development. About 75 % of Hungary’s total territory
is under agricultural land use. Because of ecological conditions and production traditions cereals (wheat, maize etc) have the greatest
importance in Hungarian crop production. In the 1980’s the country-average yields of wheat were about 5,0-5,5 t ha-1 („industrial-like”
crop production-model). In the 1990’s the yields of wheat dropped to 4,0 t ha-1 because of low input-using and wide application of the issues
of environmental protection and sustainability. Winter wheat production for quality has a decisive role in certain regions of Hungary
(eastern and middle-parts).
The quality of wheat is complex and different. Three major growing factor groups determine the quality of winter wheat: genotype,
agroecological conditions and agrotechnical factors. In wheat production for quality the selection of the variety is the most important
element. Our long-term experiments proved that the quality traits of a variety means the highest (maximum) limit of quality which could not
be exceeded in fact. During the vegetation period of wheat the different ecological and agrotechnical factors could help or on the contrary
could demage the quality parameters of wheat.
The agrotechnical factors determining the baking quality of wheat can be divided into two groups: the first group means the factors with
direct effects on quality (fertilization, irrigation, harvest); the second group contains the elements with indirect effects on quality (crop
rotation, tillage, planting, crop protection).
Appropriate fertilization could help to manifest the maximum of quality parameters of a wheat genotype and could reduce the qualityfluctuation
in unfavourable ecological and agrotechnical conditions. -
E-business in Hungarian Tourism
81-86Views:186Thanks to communication tools, globalization is spreading wordwide. For this reason, it is crucial to protect and strengthen our feature. On the one hand, we are repetitive joining the uniting world of economics, on the other hand, it is our responsibility to preserve our national characteristics with conscious politics.
Responding tardy to the touristic demands of the information society without risking the loss of our competitiveness market is highly dangerous at the current situation of the touristic, as the Hungarian Economic Development Program sets down. Unless we develop a strategy that realized radical changes in the next 4-5 years, Hungary can find itself in a disadvantageous situation regarding the touristic market of the 21st century. -
Energy Use of Biomass
264-272Views:229In this study, energy utilization of biomass is introduced with a short description of renewable energy sources and utilization possibilities of biomass.
Presently, the necessity of renewable energy sources is increasingly obvious. Among renewables, energy from biomass is to be highlighted, since this allows versatile, cheap utilization of the sun’s energy. In this respect, Hungary has advantages. Direct heat utilization and biogas production are available procedures today, whereas biodiesel and bioethanol are expected to spread in the near future. Biogas production is possibly the most versatile method for biomass conversion: it can produce energy from materials inapplicable for other utilization; at the same time, it is capable of neutralizing harmful wastes; in the end, it produces also valuable fermentative products, from bio-manure useful in agriculture, to pharmaceutical raw materials. -
Extras of the rural system of areas
271-273Views:209The essay describes the rural system of areas as a system unit of mutually necessitating natural, social, economic and human environments. A new rural developmental model has been developed to achieve the effects that strengthen this system. The taxonomically interpreted effects are achieved through guiding projects. The author presents the connections of biomass – bioenergy generation to covey the message in practice.
-
Comparative study of regional airports for summing up the competitiveness of Debrecen Airport
103-106Views:234The Debrecen International Airport in commercial means might be the eastern gate of the European Union. This statement is in question these days .In the neighbouring countries like Slovakia, and Romania the old commercial airports have came through major renovation, and technical improvement. With Romania joining to the Schengen Agreement, Debrecen is going to lose its comparative advantage. So, it is time to follow up what has remained from the five years ago still existing technical and commercial priority of Debrecen aerodrome. In this study looking through the technical background of Kosice, Arad, Cluj-Napoca, Targu-Mures, Oradea, Baia-Mare, Satu-Mare, and Debrecen international airports we have found that Satu-Mare, Arad, and Targu-Mures might be major competitors af Debrecen airport. The level of installed technology has exceeded the one in Debrecen in case of Targu-Mures, and Arad. The situation is the same in Kosice which the absolute market leader in the region.
-
Long term researches regarding the irrigation influence on sugarbeet crop inthe Crisurilor Plain
11-15Views:306The paper is based on the researches carried out in the long term trial placed on the preluvosoil from Agricultural Research and Development Station Oradea, Crisurilor Plain in during 1976–2012.
The soil water reserve in 0–75 cm depth decreased bellow easily available water content every year and in 32% of years the soil water reserve decreased bellow wilting point. For optimum water supply an irrigation rate of 2665 m3 ha-1 (variation interval 500–5090 m3 ha-1) was needed.
The irrigation determined improving of water/temperature + light report (Domuta climate index) with 47.4% in average in the period May–September. A statistically very significant connection was quantified between this indicator and the yield.
Daily water consumption increased in the irrigated variant, the biggest difference in comparison with unirrigated variant was registered in August, 86% in comparison with unirrigated variant. As consequence, the value of the total water consumption increased with 50%, variation interval was 11–154%. The irrigation covered 37.8% of total water consumption, the variation interval was 8.3%–67.9%.
The yield level of the sugarbeet increased in average with 61%, the variation interval was 9–227%. Standard deviation was lower in the irrigated variant and this emphasizes an improve of the yield stability with 25.1%. The sugar content of the sugarbeet roots from irrigated variant increased statistically very significantly in the droughty years and differs significantly in the rainy years.
Water use efficiency increased in the irrigated variant with 7% and irrigation water use efficiency was between 7.9 kg yield gain 1 m-3 irrigation water and 17.4 kg yield gain 1 m-3 irrigation water.
The positive influence of the irrigation on microclimate, water consumption, yield level, stability and quality and on water use efficiency sustain the need of the irrigation in sugarbeet from Crisurilor Plain.