Évf. 8 szám 2 (2023)

Anyagtudományok

Ultrasonic Powder Atomization for Additive Manufacturing

Megjelent:

2023-06-30

https://doi.org/10.21791/IJEMS.2023.2.8.

Szerzők

Halapi David,

University of Miskolc, Faculty of Material and Chemical engineering, Department of Foundry institute

Varga László

University of Miskolc, Faculty of Material and Chemical engineering, Department of Foundry institute

Megtekintés

PDF (Angol)

Kulcsszavak

Ultrasonic Ultrasonic Atomization Atomizstion Metal Powder Additive manufacturing (AM)

Licenc

Copyright (c) 2023 David Halapi, László Varga

This work is licensed under a Creative Commons Attribution 4.0 International License.

Hogyan hivatkozzuk

Kiválasztott formátum: APA

Halapi, D., & Varga, L. (2023). Ultrasonic Powder Atomization for Additive Manufacturing. International Journal of Engineering and Management Sciences, 8(2), 69-75. https://doi.org/10.21791/IJEMS.2023.2.8.

Hivatkozási formátumok

Hivatkozások
• ACM
• ACS
• APA
• ABNT
• Chicago
• Harvard
• IEEE
• MLA
• Turabian
• Vancouver
• AMA

---

Letölthető hivatkozások
Endnote/Zotero/Mendeley (RIS) BibTeX

Beküldött 2023-01-17
Elfogadott 2023-06-20
Publikált 2023-06-30

Absztrakt

The following article presents a special case of metal powder production, ultrasonic metal atomization. In this case, ultrasound technology is based on the capillary wave phenomenon. We verify the suitability of the produced powders for 3D metal printing with various tests. In the case of prints with a metal powder bed fusion (PBF), the properties of the raw material of the powder are extremely important. The main results of the tests carried out in the article (SEM images, EDS composition analysis, sieve analysis) were described.

Hivatkozások

1. R. J. Lang, “Ultrasonic Atomization of Liquids,” Acustica, vol. 341, no. 1954, pp. 28–30, 1962, doi: 10.1121/1.1909020.
2. S. Wisutmethangoon, T. Plookphol, and P. Sungkhaphaitoon, “Production of SAC305 powder by ultrasonic atomization,” Powder Technol., vol. 209, no. 1–3, 2011, doi: 10.1016/j.powtec.2011.02.016.
3. R. L. Peskin and R. J. Raco, “Ultrasonic Atomization of Liquids,” J. Acoust. Soc. Am., vol. 35, no. 9, 1963, doi: 10.1121/1.1918700.
4. A. J. Yule and Y. Al-Suleimani, “On droplet formation from capillary waves on a vibrating surface,” Proc. R. Soc. A Math. Phys. Eng. Sci., vol. 456, no. 1997, pp. 1069–1085, 2000, doi: 10.1098/rspa.2000.0551.
5. P. R. Gogate, “The use of ultrasonic atomization for encapsulation and other processes in food and pharmaceutical manufacturing,” in Power Ultrasonics: Applications of High-Intensity Ultrasound, Elsevier Inc., 2015, pp. 911–935.
6. R. Rajan and A. B. Pandit, “Correlations to predict droplet size in ultrasonic atomisation,” Ultrasonics, vol. 39, no. 4, 2001, doi: 10.1016/S0041-624X(01)00054-3.
7. “The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. I,” Proc. R. Soc. London. Ser. A. Math. Phys. Sci., vol. 201, no. 1065, pp. 192–196, Mar. 1950, doi: 10.1098/rspa.1950.0052.
8. J. W. S. Rayleigh, “The Theory of Sound (reprinted),” vol. 34, p. 1052, 1945, doi: 10.1017/CBO9781107415324.004.
9. O. D. Neikov, S. S. Naboychenko, and I. B. Murashova, “Production of Noble Metal Powders,” in Handbook of Non-Ferrous Metal Powders, 2019.
10. A. LAWLEY, Atomization: the production of metal powders. Metal Powder Industries Federation, 1992.
11. R. G. Iacocca and E. Lilly, “Particle Size and Size Distribution,” in ASM Handbook, Volume 7, Powder Metallurgy, 2015, pp. 127–131.