Search
Search Results
-
Design of Manufacturing Process of Mould for Die Casting by EDM Technology with the Computer Aided
57-63Views:380At present, we cannot imagine a modern production process without computer support. At the same time, its integral part is the implementation of advanced and highly sophisticated production processes and technologies. Their aim is first and foremost to ensure quality production of products with high economic efficiency of the production process. EDM technology is one of the currently active progressive technologies. This is a technology that in practice is characterized by high product quality. The high quality of products not only through this progressive technology, but also other, whether conventional or progressive, is difficult to achieve without computer support. The aim of the paper is therefore to demonstrate the process of manufacturing a die-casting mould using progressive EDM technology using computer support.
-
COVID-19 Pandemic Impact on Employees’ Physical Activity
72-84Views:1052Globalization and the recent explosive development of technology have significantly changed people’s lifestyles resulting in an increase in the number of people living a sedentary lifestyle. COVID-19 pandemic has exacerbated the situation and created an unprecedented situation in the world. In the present study, we investigate changes in the physical activity and sedentary behavior of adult workers caused by the coronavirus epidemic. In our online cross-sectional research, we used snowball methodology. The target group of the survey was adult workers. 108 people filled in the questionnaire, the majority (73.1%) are women, the average age is 37.18 years and most of them have higher degrees (Diploma: 74%, PhD: 14%). The present study revealed a decrease in physical activity and an increase in sedentary time for the employees in our study. Despite respondents detected a decrease in their physical activity, an increase was reported in the proportion of online training participants. The majority of respondents partially, or totally switched to work from home during the pandemic, which may further increase their sedentary lifestyle. We did not find significant differences among the domain of work and leisure time or occupational physical activity patterns. The workplace is a great opportunity for promoting physical activity and reducing sedentary time in the adult working population, therefore it would be important for organizations, decision-makers and health professionals to work on the design of strategies to these goals.
-
Longitudinal Dynamic Simulation Possibilities of Vehicles Using AVL Cruise M
743-748Views:527For creating vehicle dynamic simulations, in most cases, an appropriate software is required to help the dynamic model design. For this purpose several kinds of software are available in the market with different properties and user interfaces. In this article a leading simulation software of the market, AVL Cruise M, is shortly presented.
-
Estimation of the Potential Runoff Quality Improvement as a Result of Applied Green Infrastructure Measures in a Hungarian Town
34-41Views:399Green infrastructure measures improves the quality of surface and subsurface waters along with increasing the water balance on the town level. The aim of the study is to estimate the potential runoff quality improvement by applying stormwater BMP-s along traffic roads in the town. This is of high priority in the aquifer protection area where runoff water may infiltrate into the aquifer carrying pollutants from the surface. Estimations are applied: first we determine the surface of traffic roads, then estimate the quantity of different kinds of pollutants accumulated on the surface and thirdly we estimate the expected performance of the applied green infrastructure elements based on findings in the literature. We determine the impervious urban surface area associated with transport-related functions within the protected drinking water recharge area using GIS technic using orthophotos. We estimate the expected reduction of runoff pollution assuming that stormwater BMP-s are applied in the area. The overall goal is to make the significance of diffuse pollution more obvious and enhance drinking water protection through taking diffuse pollution into consideration.
-
Study on Nonlinear Behavior of Variable Thickness Plates
72-80Views:320The analysis of variable-thickness plates is much more complicated than that of uniform-thickness plates because variable coefficients occur in the equations. In reality, this analysis is of great interest in various engineering disciplines, such as civil engineering, aerospace engineering, machine design, and so on. Although there is extensive literature on analyses of plates with constant thickness, a rather limited amount of technical literature is available on the solutions to problems dealing with plates with nonuniform thickness. The reason is that the analytical solutions meet insurmountable difficulties. Besides, the nonlinear analysis process also faces more difficulties than the linear analysis of structures. For these reasons, the nonlinear behavior of variable-thickness plates based on a finite element procedure is presented in this study. Although the topic is not special, it will help the engineer have a specific view of the nonlinear bending of the plate with variable thickness. This survey will be based on the change in geometrical parameters. Numerical solutions are then presented to verify the simplicity of this proposed procedure.
-
Application of Additive Technology in Precision Casting
43-56Views:417In this paper the surface of the prepared test specimens had been examined with light microscopy and surface roughness measurements. In order to improve the surface smoothness of PLA specimens, application of ethyl acetate was required. After this surface treatment, microscopic images were taken again. The melting and decomposition temperatures of the materials had been determined using derivatography. The chosen method was precision casting with gypsum molding. Also, the plaster molds had been burnt out according to the predefined melting and firing diagram. The measurement series shows that the samples produced by 3D printing can also be used in the field of precision casting. They provide greater freedom of design, more sophisticated pieces, and prototypes can be finished in a shorter amount of time.
-
Design and Implementation of BHN Testing Equipment To Measure Remaining Stress Of Wheelset Parts (Tie Rod and Stabilizer Bar)
337-341Views:378Nowadays in the automotive industry both production and service, requires accurate lifetime calculations. Today we have big amount of theoretical background and nowadays the importancy of technical and industrial databases become more and more important. By materials scientific and fracture mechanics aspects are well covered, but the remaining stresses which are present in every step of production, we can not clearly identify the origin of them. There are different paralell methods to mesure them, but the application of different methods are depending on the engineers, and their expreiences at the company. This part of the analysis is not standardised yet, so there are differences even in the same company.
-
Practical Application of Methods in Strategy-Based Analyzes
59-72Views:794Increasing environmental volatility is a growing challenge for companies and businesses. The speed of economic events is changing, and the risk of uncertainty is increasing, requiring business to take a new approach to strategic planning. In the design and forming of their strategy, both the factors of the external and internal environment and the analysis of their competitors can be based on well-chosen methods. We consider the review of these methods, their application in planning and educational practice. The aim of our work, in which we present the methods that underpin the strategy applied in both domestic and international practice. The analysis of the external environment illustrates the construction and applicability of an external factor analysis matrix based on traditional PEST analysis and the Porter's five-factor model. In the case of internal factor analysis matrix, we focus on the approach of method choice, and on the applicable methods, the importance of the resource-based approach, the analysis of key factors and the Porter value chain analysis matrix. The third pillar of the analysis that underpins the strategy is the matrix-based assessment of competitors. The applicability of the methods depends on the form of the enterprise, the field of activity and the nature of its activities, which is complicated by the emergence of new economic spheres (e.g.: sharing) and transformed power relations.
-
Finite Element Software for Rubber Products Design
13-20Views:552Automotive rubber products are subjected to large deformations during working conditions, they often contact with other parts and they show highly nonlinear material behavior. Using finite element software for complex analysis of rubber parts can be a good way, although it has to contain special modules. Different types of rubber materials require the curve fitting possibility and the wide range choice of the material models. It is also important to be able to describe the viscoelastic property and the hysteresis. The remeshing possibility can be a useful tool for large deformation and the working circumstances require the contact and self contact ability as well. This article compares some types of the finite element software available on the market based on the above mentioned features.
-
Six Sigma in preconstruction: case study on improving of reinforcement steel processing
49-60Views:370Lean process improvements are crucial for enhancing production efficiency. In my research, I examine the application of the DMAIC methodology to develop the MEP facility within the framework of lean Six Sigma. Highlighting the challenges of precast concrete production, my study details how lean management aids in efficient process design and measurement. Introducing lean Six Sigma methodology involves standardizing processes and ensuring their effective development, contributing to the facility's efficiency
-
Topology Optimization of Acetabular Cup by Finite Element Simulation
22-34Views:709Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.
-
Enhancing Sustainable Production Through Continuous Improvement: Evidence from Nigeria’s Manufacturing Sector
14-33Views:415The manufacturing industry in Nigeria has been the so-called cornerstone of economic development since the sector has continuously played a major role in providing jobs and industrial capital. However, there remain issues that impede its progress, including inefficient resource use, unstable regulatory systems, and the need to comply with international market requirements. Specifically, it examined the effect of employee engagement, process efficiency, and resource allocation on Nigeria’s manufacturing sector. A survey research design was adopted, with a total population of 117 employees across five manufacturing firms. A total of 91 participants were administered a structured questionnaire. Data collected was analyzed using PLS-SEM. Findings revealed that employee engagement has the strongest effect on sustainable production (β = 0.412, t = 6.250, p < 0.000), followed by resource allocation (β = 0.237, t = 3.610, p < 0.000), and process efficiency (β = 0.174, t = 2.877, p = 0.004). It concluded that continuous improvement is significantly vital for sustainable production in the five sugar manufacturing firms studied in Nigeria. It is therefore recommended that management of these selected firms focus on developing unique resource allocation strategies, employee engagement, and process efficiency to ensure sustained workforce improvement, thereby achieving sustainable production outcomes.
-
Composition basics and analysis of visual language of the product
381-385Views:256The analysis of the visual language of the product demands deeper analysis of the user’s profile and built behavioral patterns. There is an existing group of factors that have relatively constant nature - gender differentiation, age differentiation, belongingness to specific group – social status, place in hierarchy, race, religion, people with special needs, etc. The analysis of the visual language of the product can be done by analyzing the basic arsenal of the composition - the means of composing form shaping: scale –related to the correct size of the products and their components; proportions –associated with organizing the form plastical and visual order of the whole and its parts; contrast - related to the shape of the product, semantical or bounded to past experience; color –bounded to both formal characteristics and plasticity, as well as to contrast and its meaningful designation; plastic of the form - linked to the proportions and scale, which determines not only the structural and formal characteristics of the products, but also the meaningful reading of the forms. The analysis of the individual composite devices is demonstrated by Ingo Maurer’s lighting fixtures.
-
Strategic Role of HR in Hungary and Slovakia, Based on the International Cranet Research (2015-2016)
478-489Views:535Western-European management trends have been spread including modern approaches to human resource management over the past decades in the countries of Central and Eastern Europe. The point of the new HR conception is the strategic partner role, which is underpinned by the appreciation of human resources. There was a rapid change in the management methods of the organizations due to the socio-economic changes in the examined countries. However, in many places the personnel departments were simply renamed, and their HR staff are still concentrating on their traditional activities. These activities are important and should be fulfilled today as well, but to play an influential role in the design and maintenance of organizational competitiveness HR should have a new, strategic attitude. The study examines HR's strategic role based on the empirical international Cranet research in Hungary and in Slovakia.
-
Use of ANSYS Software for the Acetabular Cup Structure Analysis out of the Hip Implant
1-6.Views:543Modelling the hip implant has been one of the most important researches over the past few decades. In addition, using the ANSYS software for this purpose is well-known procedure to understand the real reaction of the hip implant parts during the daily life of the installed part. This study is to focus on the practical part of the use of ANSYS software to analyse the performance of the hip implant through the feature of structure analysis available in the ANSYS. The research applies the static loads behaviour only with the help of the static structural analysis to view the advantages and the disadvantages of every design, which helps us estimate the implant’s behaviour. The study investigates the optimization of the acetabular cup using the lattice optimization along with the infill option available in the ANSYS software in order to optimize the stress and the fixture of the cup inside the pelvis.
