Search
Search Results
-
Investigation of the impacts of the by-product of sewage treatment on some characteristics of maize in the early growth stage
77-82Views:75The use of sewage sludge on arable land has been widespread for many years. This by-product, treated as waste, can provide valuable nutrients to the soil, but the applied amount of sewage sludge to arable land is limited. The possibility of application of sewage sludge is essentially determined by the composition of the sludge. The goal of the experiment was to demonstrate that the physiological, morphological, and biochemical parameters of maize (Zea mays L. cv. Armagnac) linearly change with increasing concentrations of sewage sludge (25%, 50%, and 75% as m/m%). The experiment was set up in a glasshouse. The following parameters were investigated: plant height, relative chlorophyll content, photosynthetic pigments (chlorophyll-a, chlorophyll-b, carotenoids), and leaf proline and malondialdehyde (MDA) content, and PS II quantum efficiency in the 3-leaf stages of the plants. Sewage sludge applied in lower doses had a beneficial effect on the initial growth of maize. The relative chlorophyll content was significantly higher in all treatments compared to the control. There was no significant difference in the maximum quantum efficiency of PS II reaction centers among the treatments. In this experiment, different concentrations of sewage sludge treatments had different impacts on the MDA and proline content of maize leaves. The proline content was significantly higher in all treatments, while the MDA content did not change significantly compared to the control.
-
The effect of agrotechnological factors and the cropping season on sweetcorn (Zea Mays L. convar. saccharata Koern.) production in a humid year
146-151Views:87We have examined the effect of three agrotechnological factors (sowing time, fertilization, crop density) and four genotypes on the yield
of sweetcorn on chernozem soil in the Hajdúság region in 2009. The experiment was set up at the Látókép Research Site of the University of
Debrecen. We have included two sowing times (27 April, 26 May), six nutrition levels (control, N30+PK, N60+PK, N90+PK, N120+PK,
N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) at two crop density levels (45 thousand ha-1).
In the humid cropyear of 2010 the amount of precipitation exceeded the 30-year average by 184 mm in the cropping season; the average
temperature exceeded the same by 0.8 C on the average of the examined months. The circumstances were most favourable for sweetcorn
production with the first sowing time, thus, this was when the yield of all hybrids was the highest.
With early sowing time, the highest yield (23437 kg ha-1 yield) was obtained with Enterprise at 45 thousand ha-1 crop density level at
N150 + PK nutrition level. The highest yield of the other three hybrids was 22253 kg ha-1 (Jumbo) 22286 kg ha-1 (Box-R) and 1873 kg ha-1
(Prelude). With the second sowing time, the highest yield was obtained with Enterprise again (22237 kg ha-1) at 65 thousand ha-1 crop
density level. With this sowing time the yield of Jumbo, Box-R and Prelude was 20888 kg ha-1, 17796 kg ha-1 and 17401 kg ha-1, respectively.
We found that the highest yield was obtained at the highest nutrition levels (N120 + PK, N150 +PK) with the first sowing time, while the same
was obtained at lower nutrition levels (N90 + PK, N120 + PK) with the second sowing time. -
Microbiological and Chemical Characterization of Different Composts
106-111Views:80Composting of agricultural waste is considered particularly important from the point-of-view of environmental protection. Degradation of organic substance results in a significant reduction of waste volume.
The end product of the composting process, mature compost, can be used as soil coverage against excess loss of wastes, for mulching, for organic manure etc. The problem of composting has come into limelight in environmental studies and in agriculture.
The quality of the mature compost is determined by physical, chemical and biological parameters of the composting process which, in turn, depend on initial composition of the raw materials, the technology, e.g. regular mixing and moistening and on environmental factors. Quality is the key question in compost use.
We studied the composting process in compost windrows of different raw material composition. We measured temperature, humidity content, pH, organic substance content, nitrogen and carbon content.
We counted the number of bacteria, microscopic fungy, ammonifying and cellulose decomposing microorganisms. We directed the composting process with turning weekly (to provide oxygen) and watering (to provide humidity content 40-60%).
We set up windrows of 1 m3 volume from dry plant substances (cornstalk, pea straw, tomato stalk and crop, weeds) and cow manure not older than 1 week. The cow manure was used at ratios of 0%, 35%, 50%, 65% and 100%, respectively.
We measured changes in compost temperature relationship with outside temperature until they were almoust the same. Humidity was 40-60% in most cases.
At the beginning of the process, pH was slightly acidic-neutral; it later becomes neutral-slightly alkaline (pH: 6.93-8.02) as ammonia is liberated from proteins.
At the end of the process, pH decreased again, due to humification.
Organic substance content decreased as microorganisms mineralized them. Organic carbon content decreased gradually due to microorganisms used it as an energy.
Total nitrogen content increased until middle of july and decreased gradually until than.
The carbon/nitrogen rate were higher in the beginning, it decreased until july-august and increased by smaller degree until end of the process.
The number of bacteria was higher in the first three weeks and between june-september. The number of cellulose degrading bacteria was the highest in the first three month, the number of ammonifying bacteria was the highest from the end of may until sepember.
The number of microscopic fungy was significant in the second part of process, after july. -
The Usage of New Multispectral Satellites in Agro-Environmental Protection
282-289Views:134GIS, and especially remote sensing, offers great help in performing agro-environmental protection tasks. It can process a large amount of data to an arranged set of databases, and is also an excellent source of information. Moreover its keeps the geographical coordinates of all data during processing. The usage of remotely-sensed data is one of the most up-to-date and effective ways to observe, analyze and understand the complex phenomena taking place in all the spheres of agricultural production (soil, water, air), and also to track and monitor the changes of different environmental parameters, as they constantly change in time and space. Several indices will be described, which can be derived from remote sensed data. Next, a relatively new hyperspectral satellite sensor (MODIS) will be introduced, as it can be a input data source in research performed in agri-environmental protection. Last, a new meteorological satellite (MSG-1) will be introduced, as its data are available for public usage, and it could be an important data source.
-
Using crop analysis in the precision nutrient supply system of maize
183-186Views:100The effect of the N, P and K supplies of soil on the grain yield and N, P and K status of maize was studied in a long-term mineral fertilisation experiment between 2001 and 2008 and nutrient supply limit values were determined to plant analysis. Based on the interaction between the N concentrtion of maize leaves measured at the beginnig of tasseling and grain yield, the satisfactory limit value of N supply to reach 10–14 t ha-1 yield was between 2.0–4.0%. Leaf analysis at the beginning of tasselling indicated that better P and K supplies were associated with a higher P and K concentration in the maize leaves. Correlation analysis on the P concentration of the maize leaves and the grain yield showed that at a grain yield level of 10–14 t ha-1 a P concentration of 0.20–0.37% represented a satisfactory P supply level. The satisfactory K supply limit value to reach 10–14
t ha-1 grain yield was 1.5–2.6%. -
Micropropagation of Leuce-poplar clones and its role in selection breeding
43-48Views:192Leuce-poplars (mostly white poplar and its natural hybrid grey poplar) are native tree species trough Hungary. They are covering more than 4.0 per cent of the Hungarian forested area (77 000 ha). The white (grey) poplars play a significant role in the forestation under sandy soil site conditions as well as they are of importance from nature conservation point of view as well.Long-term selection breeding work is going on at the National Agricultural Research and Innovation Centre Forest Research Institute (NARIC FRI), involving selection of fast-growing Leuce-poplar clones under dry site conditions.Micropropagation technology is relatively quickly spreading in forestry. In vitro multiplication of trees is applied mainly in fruit growing in Hungary, in case of forestry it is used mainly for selection breeding.This paper presents a short overview on the micropropagation trials with different Leuce-poplar clones and the early evaluation of the seedlings growing of the micropropagated clones/varieties. -
Global Issues of RangelandManagement
39-46Views:120Rangelands occupy about 50% of the world’s land area. They are ecologically and economically as important as rain forests and in even greater danger of degradation and disappearance. This paper reviews the definitions and distribution of rangelands and describes their global environmental importance in terms of erosion control, carbon storage and methane emission. Condition and degradation of rangelands are defined and discussed and it is argued that soil protection and carbon storage can be increased and methane emission per animal decreased by conservative use and improvement of rangelands, whilst at the same time alleviating hunger and malnutrition in developing countries. It is concluded that policies should be adopted by national governments and international deve-lopment programs to conserve and improve rangelands.
-
The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
12-16Views:135In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety. -
Applicability of hyperspectral technology for in situ phytoremediation
71-78Views:136The characterization of heavy metal polluted abandoned mining sites is a complicated assignment due to the variable spatial distribution of the pollutants, therefore complex integrated method is required in order to assess precisely the amount and the distribution of the contaminants. The examined area is flotation sludge reservoir of abandoned Pb-Zn mining site with serious heavy metal contamination. located in Gyöngyösoroszi, Northern Hungary.
The hyperspectral image of the flotation sludge is obtained by using a Digital Airborne Imaging Spectrometer DAIS 7915, in the frame of DLR HySens first Hungarian hyperspectral flight campaign (21/08/2002). Parallel to the flight campaign heavy metal content of soil samples were examined from the area of the flotation sludge. The analysis of hyperspectral data was verified by the examination of mine tailing samples by FPXRF (Field Portable X-ray Fluorescence spectrometry) (NITON XL-703).
Determinations of heavy metal containing minerals are based on the spectral profiles of the pixels of the area with using USGIS standard spectral profiles of the examined materials (galena, pyrite, sphalerite, goethite and jarosit).Applying the Spectral Angle Mapper with BandMax classification the distribution of minerals (galena, pyrite, sphalerite, goethite, jarosit) in the area was defined. The mineral formation occurs especially at the levees and the barren places of the Szárazvölgyi flotation sludge reservoir. Based on the statistic results of the samples, principal component analysis and correlation coefficient between the different metal content of the samples were calculated. The highest correlations were found between Pb-Zn, Fe-Zn and between Fe-Pb. This prove the results of the principal component analysis, where usually Pb, Zn, Fe introduce the main component.
Canopy analysis was also carried out with the hyperspectal image in order to classify the differences between vegetation types at the Szárazvölgy flotation sludge reservoir and analyse the applicability of it. Supervised classification methods were used to distinguish 8 vegetation types based on the spectral properties of the area. The results of the classifications were compared to a ground truth image, based on ortophoto, topographic map, and GPS based field data collection. According to results of the comparison, the paralellpiped classification method is proved to be appropriate method based on the overall accuracy of canopy classification, which was 54% due to heterogeneity of the vegetation.
The results of hyperspectral data and FPXRF analysis suggest that Pb, Zn and Fe containing minerals have similar spatial distribution in the examined and barren area.
Based on this study hyperspectral remote sensing is likely to be an effective tool for the characterization and modeling the distribution of Pb, Zn and Fe containing minerals at the examined heavy metal polluted sites. Further more, based on the vegetation analysis plant species for phytoremediation can be defined.
-
Effect of molybdenum treatment on the element uptake of plants in a long-term experiment
121-125Views:149Molybdenum as a constituent of several inmportant enzymes is an essential micorelement. It can be found in all kind of food naturally at low level, however, environmental pollution, from natural or anthropogenic sources, can lead to high level of the metal in plants. Our study is based on the long-term field experiments of Nagyhörcsök, where different levels of soil contamination conditions are simulated. Plant samples were collected from the experiment station to study the behaviour of elements: uptake by and transport within the plants, accumulation in different organs, phytotoxicity and effects on the quantity and quality of the crop.
In this work we present the effect of molybdenum treatment on the uptake of other elements. Molybdenum is proved to be in an antagonist relationship with copper and sulphur, while molybdenum-phosphorus is a synergist interaction.
However, in most of the plants we studied increasing molybdenum-treatment enhanced cadmium-uptake. We have found the most significant cadmium-accumulation in the case of pea, spinach and red beet. -
Examination of the population density and sowing date of different maize genotypes in the Hajdúság region
111-115Views:137The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics applied
in the experiment satisfied the requirements of modern corn cultivation.In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.
In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NK
Cobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the different
plant densities. -
Effect of the plant density on different maize (Zea mays L.) hybrids yields and leaf area index (LAI) values
51-56Views:160We have investigated the plant number reactions of three maize hybrids of various genotypes in a small-plot field experiment. The plant numbers were 50, 70 and 90 thousand ha-1, while the row distances were 45 and 76 cm. The experiment was set on the Látókép Experimental Farm of Centre for Agricultural Sciences of the University of Debrecen in four replications on calcareous chernozem soil.
The assimilation area and the leaf area index have important role in development of the crop yield. The studied three different genotype maize hybrids reached its maximum leaf area index at flowering. The maximum leaf area index increased linearly with increasing plant density. The season-hybrids reached less yield and leaf area index. According to our experimental results, we have concluded that with the decrease of the row spacing, the yield increased in the average of the hybrids. The studied hybrids reached the maximum yield at 70 and 90 plants ha-1 plant density. We determined the optimal plant number that is the most favourable for the certain hybrid under the given conditions.The higher plant density was favourable at 45 cm row spacing than 76 cm. The hybrids reached the maximum grain yield at 45 cm row spacing between 76 712–84 938 plants ha-1, while the optimum plant density at 76 cm row spacing changed between 61 875–65 876 plants ha-1.
The leaf area index values between the applied plant density for the flowering period (July 1, 24), we defined a significant differences. In the archived yields were significant differences at the 45 cm row spacing between 50 and 70, 90 thousand ha-1 plant density, while the number for the 76 cm row spacing used did not cause a significant differences in the yield. There were significant differences between the examined hybrids of yields.
-
Effect of harvest on the different fertilization methods of asparagus (Asparagus officinalis L.)
33-37Views:158The experiments were performed in the University of Debrecen Centre for Agricultural Research Institute of Nyíregyháza of 1500 m2 asparagus plantation in 2011. We were determind the number of shoots, plant height, fold thickness and yield of asparagus hybrid. I studied to the effects of various cropyear is addition Grolim hybrid asparagus growth and development. Compared to previous years, 2014 was unusually wet and cold weather conditions which causes the plantation has developed outstanding. The soil temperature early and dynamic increase due to, the harvest had started a one month earlier 2014 than the 2013. The experiment asparagus harvested from lower yields as a result of the extremely dry spring in 2015.
-
The effect of sous-vide cooking on the antioxidant properties of oyster mushroom (Pleurotus ostreatus L.)
177-184Views:166Oyster mushrooms (Pleurotus ostreatus L.) are renowned for their antioxidant, antimicrobial, and prebiotic properties. This study explores the antioxidant characteristics, activity, and β-glucan content in freeze-dried mushroom samples, investigating the influence of sous-vide cooking. Uncooked freeze-dried P. ostreatus and three pre-cooked freeze-dried samples (70, 80, 90 °C through 4 hours) were analysed for Total Polyphenol Content (TPC), Total Flavonoid Content (TFC), Radical Scavenging (DPPH), Ferric Reducing Antioxidant Power (FRAP), and β-glucans content via HPLC and Total Dietary Fiber (TDF) via enzymatic gravimetric method. Results indicate that uncooked mushroom powder exhibited superior antioxidant capabilities compared to cooked samples. The sous-vide cooked (80 °C) mushrooms displayed the highest total phenolic and flavonoid content. Moreover, pre-cooked (70 °C) mushroom powder demonstrated the highest β-glucan content, significantly surpassing the uncooked control sample. Notably, pre-cooked groups (80, 90 °C) demonstrated significantly higher TDF levels compared to uncooked sample. This research offers valuable insights into the potential use of mushrooms as high-antioxidant, antimicrobial, and prebiotic food or feed supplements, with broad implications across various fields.
-
The special questions of nutrition of forest plants
83-88Views:69Some physiological effects of bacteria containing fertilizer and some wood ash were examined in the experiments. The minimization of the use of chemicals in agriculture has been an ongoing challenge. One option lies in the intenzification of soil life. The release of organic matters by the roots and bacteria play a significant role in the uptake of minerals. The main problem to usilize wood ash in agriculture is its heavy metal contents. The
solubility of heavy metals is very low, therefore there is no risk to use the wood ash in the agriculture and in the horticulture according to our experiments. The wood ash and biofertilizer contains several micronutrients in an optimum composition for forestry and agricultural plants. -
Role of some agrotechnical elements in the precision crop technology of cereals
241-244Views:134The crop models and precision technology have an important role in the development of winter wheat and maize agrotechnics, which crops have determinative role in Hungarian crop production. The effects of agrotechnical elements (crop rotation, fertilization, irrigation, crop protection, plant density) were studied in our longterm experiments on chernozem soil. Our scientific results proved that the high yields, and good yield stability were obtained in the input-intensive crop models. Maize had lower ecological adaptive capacity than winter wheat. The optimatization of agrotechnical elements reduces the harmful climatic effects so we can increase the yield and yield stability of cereals agro-ecosystems. The yields of wheat varied between 2 and 7 t ha-1 in extensive and 8 and 10 t ha-1 in intensive crop models and the yields of maize ranged between 2 and 11 t ha-1 and 10 and 15 t ha-1, respectively.
-
Comparative study of different soybean genotypes in irrigation technology
91-95Views:314In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.
-
The effect of wet compost extract on the root tubers of green pea
51-54Views:177Nitrogen plays significant role in the life of plants, it could be the main limiting factor of plant growth. Sustainable plant nutrition pays attention to satisfy the plants’ nutrient demand without chemical fertilizers, e.g. by bounding the atmospheric nitrogen. The nitrogen fixing organizations play important role in supplying plants with nitrogenbecause the N2-fixingbacteria can fix high amounts of nitrogen.
Many effects of the sewage sludge compost extracts is known in the literature. We studied the effect of sewage sludge compost water extract in laboratory conditions on the growth of Rhizobium spp. isolated from green pea, while in a small plot experiment thepea-Rhizobium symbiosis were studied on sandy soil in the Nyírség region. The extract was produced under aerobic conditions. The compost extract was applied before and/or after sowing. In the laboratory experiments we used the sterile version of extract, in different doses.
In our work we present the effect of compost water extract on the number of green pea roots nodules, dry weight of the plant and reproduction of the Rhizobium bacteria. -
Genetic progress in winter wheat quality and quantity parameters
71-75Views:173Wheat production is significant branch of Hungarian crop production (with about 1 million hectares of sowing area). Weather anomalies resulted by climate change have increased the importance of biological basis in wheat production. Yield quality and quantity parameters of three wheat genotypes sown on chernozem soil type after maize pre-crop were studied in a long-term field experiment. Yield amount of the studied genotypes varied between 2894 and 8074 kg ha-1 in 2017 and between 5795 and 9547 kg ha-1 in 2018 depending on the applied treatments. Based on our results it can be stated that in both studied crop years the highest yield increment was realized by the application of the nutrient supply level of N30+PK. As the result of the application of the optimum mineral fertilizer level – in contrast to the control – resulted in significant yield increment in both crop years. The results of the long-term field experiment prove that water utilization of the studied wheat varieties / hybrids was improved by the application of the optimal nutrient supply. Furthermore, the water utilization of the latest genotypes was more favorable by both the control and the optimum nutrient supply level treatments. Analyzing the quality parameters of winter wheat using the NIR method it has been stated that the quality results of the well-known genotype (GK Öthalom) were better than those of the new genotypes. A negative correlation between winter wheat quality and quantity parameters has also been confirmed. As the result of the mineral fertilizer application protein and gluten content of winter wheat increased to a significant extent.
-
Effect of Ferilizer on the Yield of Maize (Zea mays L.)
40-46Views:144The effect of fertilization on the yield of maize was examined on chernoem soil with lime deposits at the experimental station at Látókép of the Center for Agricultural Sciences, University of Debrecen. The yields of maize were evaluated using quadratic regression function, in three years – between 2000 and 2002 – in non-irrigated and irrigated treatments. After calculating the regression equations, by derivation of the functions, we have determined the amount of fertilizers needed for maximum yield.
In the non-irrigated treatments, maximum yield and the active substance amount of fertilizer was as it follows: in 2000, yield of 9,133 t/ha with the application of 384 kg/ha mixed active substance, while in 2002 a yield of 6,289 t/ha with the application 236 kg/ha NPK active substance was achieved. In 2001, due to the favourable precipitation, a yield of 9,864 t/ha was achieved with the application of 245 kg/ha fertilizer. In the case of maximum yield, compared to the unfertilized control, the yield increase was 2,5-5 t/ha. The average increase for 1 kg of NPK fertilizer was 13-19 kg.
We also determined the necessary fertilizer dosage for maximum yield in irrigated treatments. In 2000, 10,003 t/ha with a dosage of 423 kg/ha, in 2001, 11,542 t/ha with a dosage of 277 kg/ha and in 2002, 8,596 t/ha of maximum yield could be achieved with a fertilizer treatment of 277 kg/ha in the examined three years. The yield increase, in irrigated treatments, varied between 3,9-5,9 t/ha so it was greater than in the case of non-irrigated experimetal plots. The yield increase for 1 kg fertilizer varied between 12-21 kg. -
Effect of Irrigation on the Yield and Quantity of Potato Varieties
53-61Views:133In Hungary, the growing area of potato area dropped dramatically in the last few decades. Additionally not only are we lagging behind Western European countries as regards yields, but the competitiveness of production is further decreased by the great alternation in yields from year to year, unpredictable market conditions, poor consumption habits and, often the lack of quality products.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment, we examined the yield and some quality parameters of 9 medium-early varieties in large parcels. Of the examined varieties, 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up in 2003 and 2004, in two years of significantly different precipitation, on 50 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, from which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the underwater mass, the amount of reducing sugars, and the colour index of frying of the tubers.
In Summary, it can be stated that among the agrotechniques, year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. However the effect of irrigation depends on the crop year. In a draughty year, like in 2003, irrigation could increase the yield by 10%, while in a more favourable wet year, the improving effect of irrigation was low. -
The examination of the agronomy, the amount of yield, and the yield stability of winter wheat varieties
61-72Views:130Our research was carried out at University of Debrecen Centre for Agricultural Sciences Faculty of Agriculture Institution of Plant Sciences Látókép Research Institute through the breeding year of 2003/2004, 2004/2005 and 2005/2006 using cherrnozem soil. In our research we tested 14 chosen autumn wheat varieties during the three crop years.
The different varieties showed very dissimilar ability of resistance against diseases through the three crop years. We could observe both susceptible and resistant varieties. Susceptible varieties got diseases even in favourable crop years. The observed winter wheat varieties showed higher susceptibility against helminthosporium (21.8%) and leaf rost (16.4%). Among the 14 varieties we experienced the least susceptibility in the case of ‘Gaspard’ and ‘GK Kalász’. The research showed that the disease of fusarium undoubtedly depends on the features of the crop year.
In terms of stem solidity we experienced big differences. Among all the observed winter wheat varieties the mid-late ripening ‘Gaspard’ showed the best results in the average of the three years, only 5.3% was beaten down.
The three ripening group of the winter wheat showed the following average yield in the average of three years: 7065 kg/hectare (early ripening varieties), 7261 kg/hectare (late ripening varieties), 6793 kg/hectare (mid-late ripening varieties). Among all the observed varieties the early ripening ‘Flori 2’ produced the biggest yield (7692 kg/hectare).
During the three crop years we reached very different amounts of yield which means that weather conditions had a telling affect on yield. In 2004 we reached an excellent average yield in all the tree breeding groups because of the favourable weather conditions. In 2005 we had a moderate amount of yield because of the unfavourable weather conditions of winter. The year of 2006 showed the smallest amount of yield which is due to the fact that the plant grew less thick than usually.
There were significant differences among the observed varieties in the term of yield, which can be attributed to dissimilar biological basics.
One of he most important questions is the yield stability of the varieties. We had extremely different results at this field. Speaking in general terms we can state that both weather conditions and genetical abilities have a determining effect on yield. In the case of winter wheat varieties the rate of yield fluctuation was quite big, moving in the interval of 33.7-70.3%. Among all the observed varieties ‘Gaspard’ showed the best yield stability (33.3%). -
Changes in the herbicide tolerance of maize genotypes in wet and dry years
124-127Views:90The tolerance of 15 inbred maize lines grown on chernozem soil with forest residues in Martonvásár was tested against herbicides applied post-emergence in two dry, warm years (2003 and 2011) and in two cool, wet years (2004 and 2010). The herbicides mesotrione + terbutylazine, nicosulfuron and dicamba were applied to maize inbred lines in the 7–8-leaf stage at the maximum dose authorised for practical use and at double this rate. The plants were scored for the intensity of visible phytotoxic symptoms 14 days after treatment.
The level of phytotoxicity observed in dry, warm years was 5.14%, averaged over the lines, herbicides and rates. The intensity of visible symptoms was almost 2.5 times as great in cool, wet years (12.76 %).
Averaged over the four years, the lines and the rates, the least damage was caused by dicamba (5.77 %), followed by mesotrione + terbutylazine (7.23 %). The most severe symptoms were induced by nicosulfuron (16.17 %). This could be attributed to the fact that some of the inbred lines were extremely sensitive to herbicides, especially those of the sulfonylurea type.
A difference of more than 1.5 times was observed between the two doses, but the correlation between the concentration and the severity of the visual symptoms was not strictly linear. Compared to the normal dose (100 %) the double rate resulted in a 162.5% increase in symptom severity. In most cases plants treated with the normal dose were symptom-free or only exhibited a low level of phytotoxicity. -
Virtual Appliances for geospatial data management and processing in the Integrated Land Management System (ILMS)
59-62Views:112Virtualization is increasingly taking on a key role in various system architectures which follow new platform concepts like Software as a Service (SaaS). This trend addresses more instant and short-term environments and comes with new methods and strategies for the distribution of mainly complex application stacks not only in large IT infrastructures. The paper presents how a so called Virtual Appliance can be set up in order to operate in virtual server environments using hypervisor software like Oracle Virtual-Box. Using the example of two server-side components within the Integrated Land Management System (ILMS), it will be shown that the use of state-of-the-art methods, standardized tools and interfaces on servers enables different aspects of environmental system management, analysis and planning.
-
Effect of cropping technologies on the yield of dry bean variety ’Diana’
37-41Views:139An experiment on three dry bean varieties (Start, Hópehely, Diana), using different sowing-times, fertilizers and plant densities was performed on sandy soil in the University of Debrecen, Centre for Agricultural Sciences, Research Institute of Nyíregyháza in 2015. The aim of the experiment was to study which treatment gives the highest yield, and whether the different treatments result in significant differences in the yields. In this paper the dry bean yield at ‘Diana’ variety is analyzed.
The treatments were done with three fertilizer doses and three plant densities at different sowing-times (April 24; May 8; May 18). As a result of the high temperature and the drought during the growth season, the yields we harvested were in low, which shows the ecological sensitivity of the plant we examined.
We concluded that the poorest yield was harvested at the third sowing-time. There was no significant difference in the yields at the first and second sowing- time. Examining all the three fertilizer treatments we applied at the experiment, we achieved the highest yields in the control plots. It might be due to the weak efficiency of nitrogen fertilizer under the extremely dry conditions. The highest yield was harvested at the control treatments during the second sowing-time. Regarding the effect of the plant densities, the highest crop yield was achieved at the treatment using 400 000 germs ha-1, followed by 300 000 germs ha-1 and 200 000 germs ha-1.