Search
Search Results
-
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:241From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
European best practises for district heating
47-49Views:278In my current article I deal with the broadening extension of district heating that is highly beneficial from environmental and climate protection aspects. I present the energy efficient and environment friendly district heating upon some outstanding European best practises.
District heating is of utmost importance concerning sustainable and secure energy supply because the share of the renewable energy sources continuously and gradually increases against the fossil energy sources (natural gas, crude oil) within the total energy consumption due to the directives for heat production of the European Union. As a consequence of that import energy dependency and coal-dioxide emission decrease in several countries like Hungary as well. -
Seasonal changes of photosynthetical parameters as a results of forest gap model
133-136Views:310Photosynthetic parameters of English oak (Quercus robur L.) as a member of Querco robori-Carpinetum were investigated in two different habitat in terms of gap forest management: in the gap and in the host forest. The artifical opening process of the forest resulted in more light for growing saplings and need for acclimatization. Photosynthesis is one of the most important way for plant life and plant production. In the centre of photosynthetic efficiency the quality and quantity traits of photosynthetic pigments are standing. During our work some photosynthetic parameters of plants (in the gap and in the forest as well) were measured: relative chlorophyll content as SPAD index, chlorophyll a and b content, total chlorophyll content and ratio of chlorophyll a and b. Based on our results no significant differences among our data in early spring. Although, during the summer significant differences occurred between the measured values in the gap and in the forest area. Lower total chlorophyll content was experienced in the gap, than in the forest area due to the lower chlorophyll-b content. Because of the high light intensity higher chla/chlb ratio was measured in the gap. The lower chlorophyll contents of gap habitat may have a part of the acclimatization process of photosynthetic apparatus against high light stress, which can determinate the survival chance of individual.
-
Single nucleotide polymorphism analysis in meat-production related genes in broiler chickens
79-82Views:266In broiler chickens, the intensive selection for growth rate, feed efficiency, body composition (breast muscle weight) traits in the last decades was successful. To improve economically important characteristics, it is possible to use molecular markers associated with meat production traits. The aim of this study was to examine genotype polymorphisms in ROSS 308 broilers for thyroid hormone responsive Spot14α, insulinlike growth factor 1 (IGF1), IGF-binding protein 2 (IGFBP2), somatostatin (SST) and prolactin (PRL) genes. A further goal of this investigation was to study the relationship between the polymorphisms and phenotypic characteristics.
In the investigated broiler population, the frequency for CC homozygous genotype was 0.77 in Spot14α (AY568628), AA homozygous genotype was 0.80 in IGF1 (M74176), GG homozygous genotype was 0.85 in IGFBP2 (U15086), DD homozygous genotype was 0.60 in PRL (FJ663023 or FJ434669). Only the AA homozygous genotype was found in SST (X60191). Chickens with AC genotype in Spot14α, and with GG genotype in IGFBP2 had higher body weight (BW) and carcass weight (CW), compared to CC and GT genotypes. However, the differences were not significant (P>0.05). There was significant association (P<0.05) between PRL genotypes and body and carcass weight, where chicken with homozygous DD surpassed individuals with homozygous II genotypes.
-
Economicalness of self-propelled work platforms in superintensive apple plantations
91-98Views:188The main goal of this study was to determine whether the use of work platforms in super intensive apple orchards in order to reduce production costs and enhance work area performance under Hungarian circumstances an economic investment is. The analysis was carried out using a deterministic simulation model based on primary data collection from apple producing businesses. The results show that work platforms have remarkable economic advantage in case of operations with high machine work expenditures or where they significantly improve the area performance of manual labour. The former was due to the much lower operating costs of work platforms compared to tractors, while the latter comes clear from reduction of manual labour input per hectare. The greatest economic advantage of work platforms occurs in case of harvesting and pruning, but in case of other operations they have no significant cost advantage. They main economic disadvantage is, however, that apple breaks more when harvesting with work platforms, i.e. picking quality deteriorates significantly. It can be concluded, that purchase of work platforms cannot be considered economic investment under Hungarian circumstances. It might be economic, utilised on maximum area (ca. 30 hectares) by certain companies in special cases, but in most cases has no favourable payback conditions.
-
Integration of Transformation Technology and Conventional Plant Breeding of Cereal Plants
75-80Views:142The integration of plant breeding and plant transformation is needed because we have to create a homozygous genotype of great agronomic value by conventional breeding before the application of genetic technology with which we modify it by using a gene or genome sequence. The aim of integrated plant breeding is to trigger such advantegous changes by genetic technology which can not be achieved via conventional breeding or just with considerably weaker efficacy. By transformation, the plant’s agronomic performance, the efficiency and security of its production will improve and it will enable more versatile uses of the plant. Genetic technology is one sequence of a new plant variety’ breeding. To create a transgenic variety, the isolation of a gene or a sequence of a gene from the donor genome for tranformation, a homozygous plant or target genome that is suitable for transformation and is created via conventional breeding methods, an effective transformation technique and the establishment of the new variety from the transformed, fertile plant are needed. The transgenic plant should be made suitable for establishing a variety by conventional breeding so that it could be produced securely, its growing could contribute to the development of modern, sustainable agriculture, its seed could be produced profitably, it could meet the reqiurements of DUS and that the changes indicated by the transgene could provide such economic advantages compared to the original variety, which have real commercial value.
-
Effect of sufficient and deficit irrigation with different salt inputs on the yield of cucumber
19-25Views:249Soil salinisation is considered one of the major environmental hazards threatening agricultural productivity and can be accentuated by climate change as well as the use of low-quality water in irrigation. This is the case in our study area which is affected by secondary salinisation due to the use of saline irrigation water for horticultural production. Deficit irrigation technique is implemented especially in arid and semiarid regions due to its potential to optimise water productivity while maintaining or increasing crop yield. The main objective of this study was to compare the effect of irrigation with sufficient (SD) and deficit (DD) doses. This research was carried out in Karcag in 2020. Cucumber was grown on a meadow chernozem soil and was irrigated with SD and DD of two irrigation water qualities. Soil moisture was monitored and crop yields were recorded. Despite the differences in quality and quantity of water, the application of less water by DD maintained the same yield as SD. We found a non-significant difference between the average soil moisture contents under the treatments (15.5 v/v% for SD and 13.5 v/v% for DD). Deficit irrigation can be an efficient technique due to its potential for improving water use efficiency, maintaining sufficient soil moisture content favourable for proper crop development and yield.
-
The Effect of Plant Density on the Yield of Sunflower Hybrid’s in 2001-2002
184-189Views:412Nowadays, for increasing efficiency of sunflower production treating hybrid-specific technologies was required. Increasing of hybrid choice gave reasons for trials in respects of critical factors, as well as in case of genotype-enviroment interactions. The effect of changing plant density show up as determinant factor which affects on yield as well as on plant hygienic conditions. Trials were established on calcareous chernozem soil (Hajdú-Bihar county), in 2001-2002. The field trials were randomized, in four repetition on small parcels. The plant density trials were established in 35.000-75.000 plant/hectar interval using a scale of 10.000 plant/hectar. 10 hybrids were used in both year.
In 2001, 55.000 plant/hectar density was the optimal, in case of most of the hybrids. The yield of tested hybrids did not show significant difference. Yield decreasing effect of using less than optimal density was more significant than in case of using optimal plant density. In 2002, the optimal density was in 45.000-65.000 plant/hectar interval, there was no possibility to find narrower optimum.
Presence of Diaporthe helianthi and the damage caused by the pathogen was significant in 1997-1999, whereas in 2001-2002 the large-scale appearance of the pathogen did not occur. In 2001, the affect of high plant density on disease caused by Diaporthe helianthi showed just tendency-like appearance, in 2002, the infection showed up just in the end of the vegetation period, without significant damage. In spite of the low infection level, the difference between the infection of the diverse plant density treatment was significant. Increasing plant density made increase the frequency of the Diaporthe helianthi infection. The rate of the flower diseases was around 3-16% in 2001, the highest infection level emerged in 65.000-75.000 plant/hectar density, whereas in 2002, the rate of infection level was less than 10%. The increasing plant density helped the development of flower diseases.