Search
Search Results
-
Angle-count sampling method for estimating forest stand volume – a practical approach
99-102Views:197Point sampling, which is also known as angle-count sampling (ACS), can be considered an efficient way of estimating the basal area and volume of forest stands. It is possible to use it in forest management: providing more accurate estimates (precision <10%) of site and stand characteristics needed for management planning. 20 black locust (Robinina pseudoacacia L.) stands were selected at final cutting age to determine the regeneration criteria based on their total volume. It was verified that at P=5% there was no difference between the main volume values of stands indicated in the relevant forest plans as well as calculated by the ACS method.
-
Preliminary studies to evaluate the use of spectral data in monitoring of apple orchard parameters
37-41Views:134The introduction/application of precision agricultural technologies has more important role in various fruit growing sectors among others apple growing. Remote sensing methods can detect electromagnetic waves where the green colour of the leaf is responsible for the chlorophyll content. The absorption of chlorophyll is in the wavelength range of 450–670 nm. Samples of apple tree leaves were taken on a weekly basis from the apple orchard at Horticultural Unit of Pallag on University of Debrecen in 2019 summer. Our studies were performed on 2 cultivars (Early Gold, Golden Reinders) and the samples were processed using 2 methodologies: a non-destructive spectral method and spectrophotometric method chlorophyll and carotenoid contents were calculated, which were created into some groups and compared with the spectral values. When the plant begins to lose strong green colour and turns yellow spectral measurements show that chlorophyll content decreases as the proportion of chlorophyll-carotenoid in the plant changes. In case of grouping into intervals, it can be observed that as the chlorophyll content increases the reflectance value decreases continuously due to the strong absorption. Based on the results, close relationship between the pigments can be detected.
-
Basic Research for the Development of Fertiliser Spreaders
52-57Views:116The knowledge of the physical characteristics of fertiliser particles is essential for the constructors and operators of fertiliser distributors. Among physical characteristics, the most important are the frictional and aerodynamic properties for the description of particle movement. Adjustable angled slopes, shearing boxes and various rotating disks are used to identify frictional properties. We have developed a high precision shearing box with digital force measuring cells and a distance signaller (incremental transducer) that we use for slide tests efficiently. We measured the frictional characteristics of 6 different fertilisers: the inner coefficient of friction and the coefficient of friction on ten test surfaces most commonly used in machinery, and we specified the relationship between displacement, loading and the coefficient of friction. We can conclude that the material of the frictional surface significantly influences the force of friction.
However, our experience tells us that the shearing box is not suitable for the measurement of the inner friction, since the examined particles slide on the metal surface of the shearing box in a growing extent in the course of displacement, so it does not measure the real inner friction. Therefore, in our experiment we have developed rotating shearing equipment with a constant shearing surface to identify the inner friction. We tested the equipment with fertilisers and we identified the inner frictional characteristics of 6 different fertilisers. With the developed rotating shearing apparatus we could measure the real inner friction of the particles.
To identify the aerodynamic characteristics of granules, wind tunnels and free-fall tests are used. An elutriator have been developed for our investigation. We have used fertilisers for testing the measuring equipment and we have identified the aerodynamic characteristics of 6 different fertilisers. -
Changes in the relationship between Hungarian Grey cows (Bos primigenius taurus hungaricus) and their calves in the period from calving to four months of age
85-90Views:177The ability of cows to care for their offsprings is a very important trait concerning beef cattle. Maternal instincts are highly influenced by breed, specific cow, and social and rearing environment. In 2020, at the Szamárháti farm of the Tiszatáj Public Foundation, we selected 15 dam-calf pairs and studied them for four months from the birth of the calves. We grouped calf-rearing behaviors according to strength and analyzed the related changes during the program. At the beginning of the relationship, "standing close to each other" (53%) and "suckling" (24%) characterized the pairs. After the first month, "standing or lying separated" grew by 69%, and "vocalization" by both animals fell by 66%. Even though the daily frequency of suckling decreased by 34% as the calves grew older, it remained a typical element of the relationship. Over time, the bond between the animals gradually weakened. This natural process of separation takes a month to complete.
-
Usage of different remote sensing data in land use and vegetation monitoring
7-12Views:153The use of remote sensing in forest management and agriculture is becoming more prominent. The rapid development of technology allowed the emergence of database suitable for precision application in addition to the previously used low-resolution and low data content images. The high resolution, hyperspectral images are not only suitable for separating the different land use categories and vegetation types but also for examining the soil characteristics and biophysical features of plants (Blackburn and Steel, 1999; Condit, 1970). We processed a multispectral satellite image (Landsat 7 ETM+) and a hypespectral areal image (DAIS 7915) about a farm on the plains and evaluated the different image classification methods. During our examinations, we examined the geometrical and radiometrical characteristics of images first, then assigning the training areas, we determined the spectral characteristics of land use categories. We performed a multispectral analysis for checking land use, where we compared controlled and uncontrolled classification systems to check their reliability. We used areal and spectral reductions to make the classifications more accurate and to reduce the length of calculations.
-
Using research findings in precision maize production
227-231Views:229The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers.
In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot. -
An advanced classification method for urban land cover classification
51-57Views:214This manuscript presents a detailed comparative analysis of three advanced classification techniques that were used between 2018 and 2020 to classify land cover using Landsat8 imagery, namely Support Vector Machine (SVM), Maximum Likelihood Classification (MLSC), and Random Forests (RF). The study focuses on evaluating the accuracy of these methods by comparing the classified maps with a higher-resolution ground truth map, utilising 500 randomly selected points for assessment.
The obtained results show that, compared to MLSC and RT, the Support Vector Machine (SVM) approach performs better. The SVM model demonstrates enhanced precision in land cover classification, showcasing its effectiveness in discerning subtle differences in landscape features.
Furthermore, using the precise classification results produced by the SVM method, this study examines the temporal variations in land cover between 2018 and 2020. The results provide insight into dynamic land cover changes and highlight the significance of applying reliable classification techniques for thorough temporal analysis with Landsat8 images.
-
Agronomic bases of precision barley production
217-220Views:117To ascertain the importance of individual preciosion factors in achieving yield and quality of malting barley, we established a multifactor
experiment at the research station of the Slovak University of Agriculture in Nitra in 2009 and 2010. Four variants of fertilization, 2 ways of soil cultivation and four varieties 'Bojos’, 'Kangoo’, 'Marthe’ and 'Xanadu’ were observed. From the quality indicators the nitrogen content (%) was observed. The results were statistically analyzed by using a multifactor analysis of variance by using Statistica 8, the program Statgraphics. The difference between years was statistically significant (1.87 t ha-1) in favour of 2010. The difference was also significant between the varieties 'Bojos’ and ’Kangoo’(1.07 t ha-1), respectively. 'Martha’ and 'Xanadu’ as well as 'Kangoo’ (0.56 resp. 0.33 t ha-1). Conventional soil cultivation in
comparison with a minimalization technology, demonstrated a tatistically insignificant increase of yield. Significant differences were obtained between the variants of fertilization. Treatment by using Condit (b-var.) showed a very positive impact in climatic favorable year (2010) with a yield result of 7.42 t ha-1. In comparison with an untreated control, the difference in yield was 0.89 t ha-1. A significant increase of yield was achieved by using the combination of solid fertilizer with foliar fertilizer (LAV + Hakofyt, var.c) 0.47 t ha-1. The crude protein content was statistically influenced by a variety and year. In 2009, the crude protein content was above average (12.38%). Significantly lower attributes were achieved in 2010 (9.90%). From the studied/observed varieties the lowest crude protein content was showed by a variety 'Kangoo’ (1.68%). -
Soil analysis as the foundation of precision nutritive supply in the Hajdúszoboszló region
141-148Views:94Larger cultivated plots are heterogeneous from a pedological aspect. Heterogeneity causes problems during fertilization and harvest. The heterogeneity of cultivated areas can be compensated by fertilization which is based on soil analysis. We carried out research into the changes of the soil on three soil types, from 1966 to 2006, on the cultivated areas of Hajdúszoboszló.
There were no significant changes in pH on chernozem meadow soil and meadow chernozem soil, but the pH increased in 0-30 cm layer on type meadow solonetz soil. The saline content decreased in every examined soil type. Decrease was the largest on meadow solonetz soil. Decline of humus content was the largest (0.95%) on chernozem meadow soil, and the smallest (0.39%) on meadow chernozem soil. The nitrogen content decreased with 528 ppm in the 0-30 cm layer on chernozem meadow soil, and decreased by 186 ppm on meadow solonetz soil. Phosphorus and
potassium content increased in every examined soil types. Rise of phosphorus content was 188.9 ppm in the 0-30 cm layer on meadow chernozem soil. The potassium content rose by 153.7 ppm on this soil type. Phosphorus content increased with 70.8 ppm, and potassium content increased by 57.6 ppm from 1966 to 2006.