Search
Search Results
-
Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
35-41Views:369The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.
The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.
The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.
The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.
Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.
-
Changes of Quality of Winter Wheat During Maturing
105-112Views:104We analysed the flour of two winter wheat varieties to determine the effect of maturity state and grain position in the ear on the element composition of flour. Samples were taken from the 14th to the 42th day of anthesis. Ear samples were cut into three (basal, central and apical) parts, the trashed grains were milled, and the element compositions of the flours were determined.
We found that the grain position within the ear has an effect on flour element content. Flours of apical grains had lower nitrogen, phosphorus and sulphur contents than flours of central and basal grains. The nutrients can be divided into two parts, based on the formation of element content during maturation. Nitrogen, sulphur and copper contents changed continuously during maturity, while the P, K, Ca, Mg, Mn, Sr and Zn contents decreased until a specific value and became nearly constant in the second half of maturity. We found that – although the nitrogen concentration of flours changed continuously – the amount of nitrogen in the flours reached a constant value for the second half of maturity. -
Examination of the Effect of Cropyear on the Yield Potential and Yield Stability of Winter Wheat Varieties
62-67Views:116Variety selection is one of the most important, determinative elements of sustainable winter wheat production. Yield potential, and yield stability are the most important elements in the variety selection of winter wheat, but baking quality parameters play an important role, too.
Several winter wheat varieties were tested for yield and yield stability on chernozem soil in the Hajdúság (in the eastern part of Hungary), in the 2001-2002-2003-2004 cropyears. The management factors were the same for all cropyears. 15 varieties in early the maturity group, 14 varieties in the middle maturity group and 4 varieties in the late maturity group were tested in the above mentioned cropyears. The climatic conditions were average in 2001, dry in 2002, extremely dry in 2003, and very favourable in 2004.
We obtained 5298-6183 kgha-1 yield from early maturity varieties, 5683-6495 kgha-1 from middle, 5694-6031 kgha-1 from late ones in the average of four years. The cropyears had strong influence on the yields, even on chernozem soil, and were characterized by excellent water – and nutrient – husbandry. Averaging of cropyears and genotypes, we obtained 6984 kgha-1 in 2001 (average cropyear), 5452 kgha-1 in 2002 (dry cropyear), 3120 kgha-1 in 2003 (extremely dry cropyear) and 8400 kgha-1 in 2004 (optimum cropyear), respectively. The yield differences between the minimum and maximum yields were 885 kgha-1 in early varieties, 812 kgha-1 in middle and 337 kgha-1 in late maturity varieties, respectively. The varieties characterized by high yield potential and the varieties characterized by good yield stability were different, so in variety selection we have to take both genetic traits into consideration. There were positive, significant correlations among the yields of winter wheat varieties (early, middle, late), the temperature of spring months. (March-April), and the rainfall of spring months (March-April) (R2=0,703**-0,768** and R2=0,681**-0,749**, respectively). We found a high negative correlation between the temperature of early summer months (May-June) and the yields of wheat varieties (R2= -0,856**- -0,918**).
According to the results of our experiment, it is very important to harmonize yield potential and yield stability in the variety selection of winter wheat. -
Examination of compost maturity using reflectance
29-34Views:168Composting is one of the most popular recycling processes for organic waste. Composting plays an important role in waste and by-product management and is becoming increasingly important in both sustainable energy management and circular economy. Composting transforms organic matter to produce a safe and stable by-product (compost) that can be applied to arable land in a similar way to fertilizer. Physical, chemical and biological methods can be used to monitor the process and to determine the maturity of the compost, as spectrometric/spectroscopic methods play an important role in the analysis of different environmental samples.
Our aim was to (1) non-destructively detect the effects of different additive ratios on the spectral properties of the composting process and the spectral data of different compost mixtures, (2) to find the wavelength ranges of the reflectance curve (inflection points) sensitive to compost maturity, (3) to determine the correlation between the inflection points and the chemical and physical parameters measured in compost by conventional methods.
The mixture of broiler and hen manure and zeolite was composted 62 days in windrow composting. In the composting experiment, the moisture content and temperature (°C) were measured every three days and compost samples were taken and in 10% destillated aquaeous suspension were measured the pH and electrical conductivity (mS cm-1). Compost samples dried to mass stability were spectrally analyzed in the wavelength range 400–1000 nm with AvaSpec 2048 spectrometer.
Based on the results, the reflectance of mature compost were smaller in the last days of composting than the reflectance values of day 0 samples, thus compost maturity can be detected spectral in the VIS-NIR wavelength range. For the tested compost prisms, the reflectance of each sampling day shows a constant slope, with a significant overlap of the reflectance curves up to 400–700 nm wavelength range, and there was a breakpoint in the 700–750 nm wavelength range which was proved by binary encoding.
-
The effect of crop year and agrotechnical factors on the yield of various maturity groups of Limagrain maize hybirds
19-23Views:134The Limagrain maize hybrids in different maturity groups were examined at the Látókép Experimental Station of the Centre of Agricultural Sciences and Engineering, University of Debrecen on a calcareous chernozem soil with loam texture, between 2001 and 2007 in a multifactorial long-term field trial. Doses of fertilizers: 1 N:0.75 P2O5:0.88 K2O fixed proportion of NPK doses. The basic dose of nitrogen is 30 kg ha-1. The application of fertilization was 1, 2, 3, 4, and 5 times more than the basic dose, beside of untreated control. The long-term field trial is performed in none irrigated and in irrigated version.
The goal of the study was to analyze the effect of precipitation (environment factor) in one hand, and to evaluate the effect of fertilization and irrigation (agrotechnical factors) on the yield of maize hybrids in different maturity groups in the other hand. At the same time I studied the effect of interaction of different factors on the yield of maize.Analysis the yield of Limagrain hybrids revealed: the years considerably affected the level of the yield. In dry years the yield was 1.351 t ha-1 less, than in rainy years. As the effect of fertilization the yield increased, the statistically proved biggest increment was at level of 90 kg N ha-1. Evaluating the maturity groups, FAO 300 hybrids reached higher level of yield.
In non irrigated conditions in the average of the seven years 60 kg N ha-1 was sufficient to reach the maximum yield. The efficiency of fertilization on yield in irrigated version increased, 120 kg N ha-1 assured the reliable level of yield.
Without irrigation in comparison to the results of FAO 200 group, with the growth of FAO numbers the yield is increasing in all cases. The most significant increase was at FAO 300 (3.562 t ha-1). With irrigation the greatest difference in yield was in FAO 400 (+2.720 t ha-1) compared to FAO 200. -
The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
95-104Views:81The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
The soil of the experimental plots was meadow soil.
Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
Results of the sowing time experiment:
In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
Results of the plant density experiment:
We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years. -
Evaluation of the Green bean variety candidate BU-16
75-81Views:75This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Applicability of reflectance to determine compost maturity
31-35Views:123The utilisation of composts depends on their maturity and stability. A great part of the determination methods can be set in laboratory and needs complicated sample preparation. The aim of this paper was introduce an effective and fast method which based on the different reflectance of the different organic compounds.
During our research we examined the degradation process of compost prisms based on sewage sludge, wood-clipping and straw with temperature and reflectance measurements.
As a result, we came to the conclusion that the reflectance, measured at 645 nm or higher, is applicable to determine compost maturity if it is used with temperature measurements. -
Grain Moisture of Maize Hybrids in Different Maturity Groups at Various Harvesting Dates
24-25Views:85The experiments were designed to determine the extent to which late harvesting helped to achieve low grain moisture content. The grain moisture contents of 24 hybrids from each of four different maturity groups were recorded during the last decade of September and the first decade of November over a period of three years (1999-2001).
The data indicated that late harvesting led to a substantially smaller difference between the hybrids. While in late September the difference between the grain moisture content of the earliest (FAO 200) and latest (FAO 500) hybrids was 8.9%, this value dropped to 1.5% over the average of three years when measurements were made in early November. With the exception of the earliest group, the grain moisture content in all the maturity groups declined during October. The later the hybrid, the greater the decline.
This change in the grain moisture content during October exhibited a considerable year effect. When the weather in October was warm, with little rain, the decrease was greater, while in cool, wet years the grain moisture content declined to a lesser extent, or in some cases even increased. -
Grain yield and quality of maize hybrids in different FAO maturity groups
126-131Views:68An improvement in the quality of maize grain by increasing the level of components responsible for its biological value is possible
by using genetic means. However, a change in the genotype, together with improving the nutrient properties of the grain, also has some
adverse consequences connected with a fall in yield and in resistance to diseases.
Field experiments were conducted during three years (2003, 2004and 2005) to evaluate environmental effects on grain yield and
quality responses of maize hybrids. Twenty one hybrids of various maturity groups (FAO 150-400) were planted to achieve an optimum
(60-70 000 plants per hectare) plant populations and grown under the medium-N (80 kg N ha-1) fertilization. Environmental conditions
significantly affected maize hybrid responses for grain yield, starch, oil and protein contents, and consequently, starch, oil and protein
yields per hectare. Hybrids of flint type, which have a short vegetation period, had high protein and oil content but the yield averages
were low due to the slower rate of starch incorporation. Hybrids of the dent type have a longer growing season and more intense
carbohydrate accumulation, but low protein and oil contents. In wet years there was a higher rate of starch accumulation, while dry
years are favorable for protein and oil accumulation. Positive correlation existed between starch content and grain yield and 1000-
weight as well as between oil content and volumetric weight among tested hybrids. Negatively correlation existed between grain oil and
starch content as well as between oil content and grain yield and 1000-weight. Thus, end-users that require high quality maize may need
to provide incentives to growers to off set the negative correlation of grain yield with oil and protein content. -
Test Results of Winter Wheat Varieties in 2002/2003 in the Hajdusag
59-64Views:102We examined 35 early, 32 mid-season and 12 mid-late winter wheat varieties on calciferous chernozem soil after sunflower green crop in 2003. We set-up the experiment on small-size parcels, with 4 repetitions. In addition to the favourable agrotechnical conditions, with this year’s extreme ecological conditions the varieties resulted in weaker yields (2500-3200 kg/ha). Our findings have proven that there is a significant difference both between the maturity groups and between the yield potential of varieties with different genotypes, inside each group. Early varieties showed lower yield potentials according to the other two groups. The differences between the various variety’s yields was the smallest in the mid late group (893 kg/ha). Under given ecological and agrotechnical conditions, the following varieties showed the relatively best yields and best adaptability:
• early maturing varieties (3200-3700 kg/ha): Mv palotás, KG Magor, Mv Mambo, Mv Emese, GK Margit, GK Tündér, GK Csongrád, GK Attila, Mv Amanda, Ukrainka;
• mid season varieties (3300-3800 kg/ha): Győző, GK Marcal, Róna, GK Rába, Buzogány, MF Kazal, GK Mura, Hunor, GK Cipó, Mv Magvas, Mv Vilma, GK Zugoly, Jubilejnaja 50;
• mid-late varieties (3200-3600 kg/ha): Maximus, Complet, KG Kunhalom, GK Holló. -
Comparative study of different soybean genotypes in irrigation technology
91-95Views:283In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.
-
Examination of the chlorophyll content of maize hybrids of different maturity groups at different N fertiliser doses
159-162Views:119Nitrogen fertilisation is a critical point of maize production. Five hybrids of different maturity dates were examined in a field experiment, three treatments (different application dates) and three basic fertiliser doses (0, 60, 120 kg ha-1 N) were used. At the 6-leaf-stage of maize, each fertilisation level of the 2nd and 3rd treatment was given 30 kg N ha-1 fertiliser active ingredient in addition to the basic fertiliser doses with the exception of the control plots and further 30 kg N ha-1 fertiliser was applied at the 12-leaf-stage. The final fertiliser doses were 0, 90 and 150 kg N ha-1 in the second treatment and 0, 120 and 180 kg N ha-1 in the 3rd treatment. The whole amount of the basic fertiliser (ammonium nitrate) was applied in the spring, one month before sowing.
The relative chlorophyll content of the maize leaves was measured, with a Minolta SPAD-502 measurement device. The measurements were carried out at the 6-leaf growth stage (V6) of maize on the youngest fully developed leaf of the 6th, 7th and 8th plants from the second row of each plot.
There were significant differences in the SPAD-readings measured at the V6 phenophase of maize between the hybrids (p<0.001) and the fertiliser treatments (p<0.05). The regression analysis did not show any correlation between the SPAD-values and fertilisation.
The highest significant SPAD-reading and yield were obtained by applying 120 kg ha-1 N. As a result of the regression analysis performed on yield, it can be concluded that the correlation between fertilisation and yield in the 1st and 2nd treatment was moderately close (r=0.439, r=0.480) and it was close in the 3rd treatment (r=0.513). The correlation between the SPAD-readings and yield was the closes in the 2nd treatment (r=0.639), while the SPAD-value had a 40.9% influence on yield (p<0.001).
-
The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
39-49Views:98Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety. -
The role of the hybrid-specific technological recommendations of maize in precision crop production procedures
297-302Views:88The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturity groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.
-
Review on the fatty acid profile and free fatty acid of common carp (Cyprinus carpio)
99-105Views:113Carp or ponty in Hungarian, is considered commercial freshwater fish, which is an adaptable species in both wild and cultured conditions. Carp has high nutritional value content, favorable taste, it is rich in protein, and low in saturated fat. The nutritional content in fish is composed of many chemical constituents and influenced by many factors. One of the components that its content may be different due to internal and external factors is fatty acids, which may vary depending on endogenous and exogenous factors. The endogenous or internal factors include the genetic, size, sexual maturity, and life cycle phase. While microclimate, water quality, quality of food or diet habit, and the amount of available food or starvation are considered as exogenous or environmental factors. Freshwater fish has the ability to convert essential fatty acid into long chain polyunsaturated fatty acid like AA, EPA, and DHA. Most results showed that palmitic acid and oleic acid were the dominant SFA and MUFA in carp both for wild and farmed carp in all seasons. The PUFA for wild carp was mainly dominated by DHA, while on farmed carp by LA. It confirmed that high LA content in farmed carp was related to the diet habit. The amount of lipid and FA were changed in line with the season. Even the statistical analysis showed no significant difference, but some studies showed a contrasting result. Moreover, most obtained results acknowledged that FA tends to decrease during the spawning period. The amount and composition of FA were affected by the total lipid content. The lipid must be broken down into simpler compounds such as FA or FFA for the metabolism of fish. The result of metabolism then transported into the utilising tissue and used as energy.
-
Effect of Moringa leaf extract and set size on the bulb weight, diameter and yield of onions (Allium cepa L.)
127-131Views:259Studying the use of natural extracts or biostimulants in improving vegetable plants is the current needs as an alternative way to the use of chemical products. This experiment was carried out to evaluate the effect of Moringa oleifera leaf extract (MLE) as a natural growth regulator on bulb diameter, weight and yield of onions ‘Texas Early White’ cultivar. Therefore, three concentrations (control, 2%, 4% and 6%) of MLE and three different onion set sizes [small (3±1 g/set), medium (6±1 g/set), and large (10±1 g/set)] were prepared in a randomized complete block design with three replications and plant spacing 20×15 cm. MLE was applied as a foliar spray directly onto the plants with the amount of 25 ml/plant every two weeks from sprouting to maturity. The achieved results indicate that the interaction of foliar spray with moringa leaf extract 4% and large set size of 10±1 g/set gave the highest value of the total yield 4802.7 g m-2, while the lowest yield 1531 g m-2 was recorded in the interaction of control and the smallest set size of 3±1 g/set. Also, a significant difference was recorded in bulb diameter separately. Thus, the largest bulb diameter 68.90 mm was obtained from the planting of the largest set size 10±1 g/set with 4% of MLE while the smallest bulb diameter 38.40 mm was recorded from the smallest set size 3 ±1 g/set with control treatment. Similarly, a significant effect was recorded in both set size and MLE separately. The highest bulb diameter 58.71 mm was achieved in the planting of the largest sets 10±1 g/set, while the lowest diameter was 42.12 mm in the planting of the smallest set size 3 ±1 g/set. Similar results were recorded for the bulb weight and total yield. The concentration of 4% MLE produced the highest bulb weight 99.74 g/bulb and yield 3324.5 g m-2, while the lowest bulb weight and yield was obtained in the control treatment 55.61 g/bulb, and 1869.3 g m-2. Consequently, the results indicate the positive effect of Moringa leaf extract which can be applied as a natural substance in the form of foliar spray at critical growth stages to improve the growth and yield of dry onions.
-
Examination of French bean on organic and conventional farming of Research Centre of Nyíregyháza
87-98Views:84This study presents the yield results of some French bean varieties in organic and conventional farming. This study presents the advantage of organic farming in environmental point of view and in nutrition. Sale of organic products is insured, there is solvent demand rather in abroad than in Hungary.
In Research Centre of Nyíregyháza had made organic farming since 1994, at present on 74 hectares.
In the first trial, variety comparison with 9 yellow podded French beans in organic and conventional farming was conducted. Varieties: Carson, Cherokee, Debreceni sárga, Goldmine, Héliosz, Minidor, Sonesta, Sundance és Unidor. The following parameters were observed: the time of emergence and flowering, number of plants per plot, plant height and flowing green harvest. We weighed yield of the standardized, un-standardized and diseased pod fractions. The results were evaluated statistically with SPSS and Excell softwares.
Emergence had all at once, but the plants of organic farming were 5 days earlier at flowering and maturity, than conventional farming.
The plants in organic place were more developed than in conventional ones. Emergence was more uniform, the growth and the number of plant were square. Significant difference was not detected in plant height between two places. Most of the varieties examined had better total yield in organic place, than in conventional ones. Deviation depended on variety. ‘Sonesta’ and ‘Debreceni sárga’ had the best yield in both places. In
conventional farming choice can be expanded with ‘Unidor’ and ‘Sundance’. In organic farming choice can be expanded with ‘Minidor’ and ‘Carson’.
In both places the Sonesta, Debreceni sárga and Unidor varieties had the most standardized yield per hectare. In organic place Carson variety had good pod yield because it was infected less by diseases.
In the another trial we studied inside content values of some varieties on organic and conventional places. The parameters were observed: dry matter-, starch-, crude fibre-, crude protein content and amino acid content.
The rates of asparagin or glutamine acid were the highest, which was followed by serin or histidine. In asparagin content was the most deviation between conventional and organic farming.
Significant differences were between varieties in dry matter-, starch-, crude fibre-, and crude protein content both on organic and conventional places. Each variety had significant differences between organic and conventional farming.
Starch had strong and negative correlation with dry matter, crude fibre and crude protein content.
Budai piaci and Minidor varieties and BU-16 variety candidate had higher starch content and lower dry matter, crude fibre and crude protein content on organic place. Sonesta variety had almost equal dry matter content on both places, but crude protein content was higher with 10% and starch content was lower with 6% on organic place, than on conventional place. Paridor variety had almost equal starch content, but it had higher dry matter and crude protein content on organic place. -
Comparing the yield of maize (Zea mays L.) hybrids in organic and conventional agriculture
13-17Views:74The European Green Deal was published by the European Commission in 2019. The main aim of the program is to reach net zero greenhouse gas emissions by 2050, making Europe the first climate-neutral continent in the world. To achieve this, criteria are also set for agriculture: increasing the share of land under organic farming to 25%, reducing the use of fertilisers and pesticides. However, the benefits of organic farming are widely debated. The aim of our study was to compare the yield of maize (Zea mays L.) hybrids bred in Martonvasar in two different cropping environments. The silage yields of 20 different maize hybrids were evaluated in a three replicate small plot experiment in an organic field and an adjacent conventional field. The average green mass yield of the hybrids was 36,58 t ha-1 in the organic field and 43,03 t ha-1 in the conventional. The green mass yield in the organic area was 20% lower than in the conventional area, and the dry matter yield and digestible dry matter yield were about 18% lower. Hybrids of different maturity groups responded differently to organic cultivation. The yields of early hybrids decreased more and late hybrids less in the organic farming compared to the conventional production.
-
The effect of plant density to the yield results and the yield components of maize hybrids
89-93Views:135Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way. -
Flesh firmness examination of scab-resistant apple varieties in a storage experiment
93-98Views:129Of the different physical characteristics of fruits, one of the most essential qualities is flesh firmness, as is an important parameter when selling fresh apples, processing the fruit (processing industry) and during its storage. In the scope of our research, we examined five apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The five examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The two-month storage experiment was conducted at 16-17 °C, which had an aggressive effect on our stored apples. Flesh firmness, weight and diameter were measured on three dates for each of the five apple varieties. Our results were evaluated using IBM SPSS Statistics 20 software. We aimed to compare flesh firmness, weight and diameter of the five apple varieties and their changes during storage. Isaaq (86.34 N/cm2), Modí (94.06 N/cm2) and Fujion (84.90 N/cm2) had outstanding initial flesh firmness results. The Modí apple variety provided the best storage parameters.
-
New methods of compost homogeneity determination in sewage sludge based compost prisms
49-52Views:157There is no effective method of homogeneity measurement of compost prism. The most frequently used technology is the examination of the particle distribution. This method needs a lot of time and large number of samples. The aim of our research is establishing different effective methods to determine the homogeneity of compost prisms. During our work, we examined the homogeneity of a prism made of sewage sludge and saw-dust mixture.
The measurements were based on the different properties of raw materials. According to this we examined the homogeneity by moisture content, heavy metal content and gas distribution measurements.
The most effective method is the measurement of gasconcentration. Although gas-concentration measurements it need special equipment it has more advantages than the other methods. The examination of gas-distribution compensates the problem of sampling because the measurement is direct. It provides the opportunity to estimate the amount of emitted toxic gases and to determine the maturity of the compost and the effectiveness of the degradation. -
Effect of noninvasive castration method on weight gain, behavior and meat quality of ram lambs
21-29Views:150In the course of producing heavyweight lambs (above 35 kg), males need to be separated from females at the end of the fattening period. If not, the rams must be castrated because they reach sexual maturity, and their activity bothers the ewes or unwanted pregnancy may occur. The present study surveys if the Hungarian sheep keepers know or use the non-surgical elastrator method for castration and assess the effect of castration (surgical and non-surgical) on daily weight gain, behavior, moving activity, and meat quality of rams, respectively. We found many advantages regarding the use of the elastrator method. Based on the survey results, 100% of farmers who used elastrator had a positive experience and favorable opinion about this method. There is no need to separate the rams, which allows for less area requirement and more economical technological conditions. The traditional castration (with a knife) process is longer (4–6 minutes), and caused longer-lasting stress while the elastrator application is bloodless, took only 20–30 seconds, and were stress-free. The number of steps of ring-gelded individuals was much lower than that of the non-castrated rams. The difference in steps number could also be seen in ewes separated into different ram groups. The weight gains of individuals castrated by the ring were better than the surgically castrated ones and also individuals with testicles. The palatability of the meat from the non-castrated group was less favorable, and the chewiness of the ringed group was the best. Finally, our results highlighted the benefits of the noninvasive elastrator method in animal welfare aspects.
-
Development of the antioxidant indexes (FRAP, TFC, TPC) of scabbing resistant apple varieties in storage
89-94Views:137One of the most important groups of bioactive substances in apples are antioxidants, which have a health-preserving effect. The amount of these compounds varies not only during the ripening of the apple fruit, but also continuously during post-harvest storage. A growing group of health-conscious consumers are looking for apple varieties with a nutritional value that satisfies their needs.
In the scope of our research, we examined 5 apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The 5 examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The 2-month storage experiment was conducted at 16–17 °C, which had an aggressive effect on our stored apples. Total polyphenol (TPC) and flavonoid (TFC) content as well as FRAP values of the apples were measured. Measurements were taken immediately after harvest and after 1 and 2 months of storage. Our results were evaluated by using the IBM SPSS Statistics 20 software. Our aim was to compare the antioxidant results of 5 scab-resistant apple varieties, which change continuously during storage.
The antioxidant content of our apple varieties increased during 2 months storage. The best result was achieved by the Modí apple variety (FRAP: 467.32 mg/100g; TFC: 317.76 mg/100g; TPC: 1771.97 mg/100g). Consumers may want to consume apples stored for a longer period of time if they are to absorb large amounts of antioxidants.
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:94Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance.